Installing ImagerRunner 1133a printer on Mavericks

I just bought new MacBook Pro Retina 13,3" and I am pretty happy with it.
I have to say that this is my first Mac and I am new in this world.
I own a Canon ImageRunner 1133a printer/scanner/copy and it has been working fine with Windos7 PC's.
Printer is connected to a local wifi network.
When I tried to install it on Mac I did all this:
1. Donloaded driver from Canon website called Canon PS Printer Driver for MacOSX v4.00
2. Installed the driver on my mac
3. Started new printer setup on mac
4. "+" to add new printer - IP
5. On IP field added printer IP
6. Protocol = LPD
7. USE = Select Software = Canon IR1133 PS
Then pressed "Add" and everything seemed to be OK.
Even the picture of a printer is right one.
But when I start to print the printer icon apears on bottom roight corner of a desktop with red "!" and printer makes one peep.
The icon disapears and nothing prints.
Can anyone help?

Hi, I have exactly the same issue. Can not print. :-( Have anyone found a solution? I tried the lates PPD and PS from europen cannon site. No luck.

Similar Messages

Just upgraded to Mavericks and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported. Is there a way to use my HP6100 Printer with Mavericks?

Just upgraded my 2009 iMac (3.06 Ghz, core 2 duo $GB 1067 Mhz DDR3) to Mavericks OSX 10.9.5 and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported. Printer says the software was improperly installed. Is there a way to use my HP6100 Printer with Mavericks or do I need to go back to Mountain Lion or Snow Leopard?

It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
Alternatively ou could try Gutenprint (open source software):
http://gimp-print.sourceforge.net/MacOSX.php
I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you.

Problems scanning with HP printer and Mavericks

I recently installed the GM version of Mavericks and tried to scan some stuff and it came up with this error "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only." I tried repairing permissions and reinstalling the scanner software, but to no avail.....I'm not certain if it is because of Mavericks or something unrelated to that...any suggestions?

Hi burdell1,
As I am sure you know, OS X Mavericks has not yet been released by Apple. Gold Master is only a version of the Mavericks and was released to developers but not yet to the public. The HP software you are using is not compatible with the OS X 10.9, it was designed for the 10.8. This is likely why you are experiencing the issues you are having.
Maybe try scanning with he system preferences rather then the HP Scan software. How to Scan without HP Software.
Method one: Scan from Apple Preview
Method two: Scan from Apple Image Capture
Method three: Scan from Print & Scan
With any luck on of the above options will enable you to start scanning again. Hope the information I have provided is helpful!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How do I get my HP OfficeJet 4620 to print with Mavericks?

How do I get my HP Officejet 4620 to print with Mavericks?

By downloading and installing the v10.9 Mavericks driver here > Software & driver downloads HP Officejet 4620 e-All-in-One Printer | HP® Support
Then open System Preferences > Printers & Scanners > Print then click ➕ to add the printer.

Re: Unable to print on Mavericks

Hi..
After updating to Mavericks 10.9, I am unable to print. The printers are there and the process starts, but it is not able to connect.
I tried resetting the printer settings, but still getting the same result "unable to connect".
I have a HP Laserjet 1020 and HP Deskjet K109. Both printers are on office network.
Earlier, i was able to print on both printers in the same network with OS 10.8.
Need Help.

While on hold with HP yesterday I heard them say that there are no new drivers for OX 10.9 and their printers. They said that Apple Software Support had a fix. HP also has a video titled “Installing an HP Printer in Mac OS X Mavericks Using Apple Software update with a USB Connection.”
The video says to turn on your printer, connect the USB cable to the printer then to the Mac, and voila, you get a small window which leads you right to the desired operation.
I did that and nothing happens. IF anyone has any luck making that work, please post it for all. This really seemed to start with OS 10.8, as my .png and soon my .jpg items were blurred and nearly unreadable. Also, my documents scans came out blank.
In my 31 years with Apple this is the dumbest thing yet. [Still there are some silly changes in 10.9 such as the tags which are now useless for me, inability to change mail to all text (eg. eBay emails with lots of unneeded graphics), lack of easy access to addresses when sending a new message in Mail.]

HT3669 Do you have driver for Samsung ML 1210 printer for mavericks? Please help!

Do you have driver for Samsung ML 1210 printer for mavericks? Please help!

I don't believe that Samsung ever made a driver for this model that worked in intel. Unfortunately, I think your printer is just too old. You can read here
http://technicalfault.net/2011/08/22/installing-the-samsung-ml-1210-printer-on-m ac-os-x-lion/
or else contact Samsung and ask them.
Cheers
Pete

I am trying to install a new printer and I am not sure which application to use?

I am trying to install a new printer with the external CD rom drive on my MacBook Air. When I load the disc it is not allowing the program to run as it is stating that I have the wrong application to do so. How do I install things from the external CD Rom?

What model printer is it?
It is unlikely you need its installation CD-ROM at all.
Mac 101: Printing (OS X Lion)

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to che

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing." I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13

Installed a new printer and one line on the top is skipped

Appreciate your inputs.
We have been using the 'Check Printing report' for quite a while; We recently installed a new printer and we see that the alignment has gone wrong.
The checks are printing from one line below as it is skipping one line. Where do we adjust the setting so that the printing starts from the place where we want?
Thanks in advance

Hi
Im no expert but I doubt its a template issue more likely to be the control escape sequence on the printer diriver set up. Check your printer manual and the current set up you have.
Regards
Tim

Printer's wireless stopped working after installing a wired printer.

I recently installed a new Epson printer to my computer with a wired connection. That works fine as far as I know, but when I got home, I found that my wireless HP printer no longer worked through the wireless connection, though the wired connection worked fine. It also worked fine that morning before I installed the new printer. Is there any chance that when I installed the new Epson printer that some of the settings would have transferred over to the existing HP printer, or is it more likely something in the HP printer itself? Either way, what could it be and how would I go about fixing it?
For reference, the malfunctioning printer is an HP Officejet 7500 E910, and the newly installed printer is an Epson Artisan 730 Series.

Hi mgrimm,
I would look first at the connection to the router.
Does the Officejet 7500 still have an IP address? If you enter the IP address as the URL in a web browser, does it open the Embedded Web Server in the printer?
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

I was trying to install a coupon printer software. It seems to be stuck in the installation. How can I quit it? I tried quit and it won't work.

I was trying to install a coupon printer software from a website and it seems to be stuck. It has been installing it for hours. When I click on the installer and try to quit it won't let me. Any suggestions on how I can stop this?

Click the Apple icon in the upper left corner and choose Force Quit. Look for the item that says Not Responding and force quit it.

How to install Canon MG3170 printer to Macbook Air (mid 2012), both USB & wifi

I have been trying to install the Canon MG3170 to my Macbook Air (mid 2012 version) using OS X Version 10.8.4. I followed the paper manual that came with the box & used the CD provided. In the midst of the installation, "AN ERROR OCCURRED WHILE TRYING TO ADD THE SELECTED PRINTER: UNABLE TO FIND THE APPROPRIATE SOFTWARE ON YOUR SYSTEM AFTER RUNNING SOFTWARE UPDATE."
Problems:
1) Cannot connect on Network because there is no WPS button on my Airport Extreme and Airport Express.
2) Cannot print, both via USB or wifi network.
When I bought the printer, I specifically selected this because it has Airprint and wireless printing and was one of the few printers in the Apple Online store. However, I have been having a lot of issues getting the printer installed to be used on my Macbook Air.
Please help!!

Thank you John Galt!
After running SOFTWARE UPDATE, I restarted the Macbook. (DO NOT CONNECT THE PRINTER TO THE MACBOOK YET!)
Then I connected the Canon Printer MG3170 to my MacBook Air via the USB cable.
Next, I switched on the printer.
I am able to print and scan (via USB cable) from;
SYSTEM PREFERENCES - PRINT & SCAN - select CANON MG3100 series.
To install applications for printing & scanning, go to http://support-asia.canon-asia.com/contents/ASIA/EN/8201148300.html
However, this solved part of the question above, i.e., printing via USB cable (which is not the whole purpose of using the Airprint Printer) but at least it is a start.
*NOTE: UNINSTALL any prior Canon softwares and drivers specifically installed for this printer first before attempting the steps above as it may interfere with the installation process.

Hi All, I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain" I run a test print and its se

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

Unable to install C4500 HP printer on Windows 7

unable to install C4500 HP printer on Windows 7 - printer installation disc only supported by xp and vista. What do I need to do??
This question was solved.
View Solution.

Hi,
You may download the Windows7 compatible software below:
http://ftp.hp.com/pub/softlib/software11/COL30130/mp-74912-1/PS_AIO_04_C4500_USW_Full_Win_WW_130_140...
Make sure the USB cable is unplug before performing the installation.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Windows 7 64 bit OS will not install any HP print drivers

My HP Pavilion p7-1297cb pc which is running windows 7 home premium 64 bit OS will not install any HP print drivers. All my windows updates are current, HP print and scan doctor did not fix it, I also tried MS fix it manager and did not work. When I try to use my HP Officejet Pro 8500A Plus installation CD or HP's download center, software almost installs, but says print drivers will not install. Also, I tried using USB connection and windows tries to install software, but does not work. Same for HP print driver support. I tried installing 3 different HP printers I had and all had the same issue. Any ideas on why my system will not allow any print drivers to install?

Hi rrfhp,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand none of the HP drivers will fully install.
I will be happy to help you.
Are you signed in as the Administrator of the computer?
I would turn off all start up programs to make sure there isn't something blocking the printer.
Click on start, in the search box type in run, enter, then type in msconfig, click OK.
Click the Services tab.
Click to select the Hide All Microsoft Services check box.
Click Disable All, and then click OK.
Then click on the start up tab at the top.
Click on disable all.
Reboot the computer.
Temporarily turn off any Antivirus software.
Then run the installation again by right clicking on the setup and selecting run as Admininstrator.
Don't connect the USB cable until prompted.
Try printing now.
Then go back into msconfig and enable the All Microsoft Services and enable all on the start up tab.
Turn the Antivirus software back on again.
Please let me know the results if you are still having issues.
Are you getting any error messages?
Thank you for posting on the HP Forums.
Have a nice day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Installing ImagerRunner 1133a printer on Mavericks

Similar Messages

Maybe you are looking for