Installing isqlplus on existing 9.2.0.3  & 9.0.1.4 databases

I have two Oracle databases one is 9.2.0.3 and one is 9.0.1.4. I would like to install isqlplus on these two systems. Can I do a custom install from a 9.2.0.4 install disk and just select isqlplus and or isqlplus and http for the install type?
Thanks,
John

I haven't tried to install iSQL*Plus after the installs have been patched, but I suspect you will need to do a custom install from the original CDs. It may be safer and easier to install in one place, then configure that install to connect to the other databases.
Alison

Similar Messages

  • [SOLVED] ABS - nasm - install file (nasm.install) does not exist

    I was attempting to build the nasm package and I encountered the following error:
    ==> ERROR: install file (nasm.install) does not exist.
    When reviewing the PKGBUILD file there was a line in the header:
    install=nasm.install
    ArchWiki (PKGBUILD) explains the install directive
    The name of the .install script to be included in the package. pacman has the ability to store and execute a package-specific script when it installs, removes or upgrades a package. The script contains the following functions which run at different times
    I removed the install= line and everything appeared to work.  My question is... does anyone know if the install script it was expecting to find did anything special that is going to cause me grief going forward?
    Thx
    Last edited by dwardca (2013-07-06 04:43:41)

    I figured out what I did wrong.   I copied only the PKGBUILD file out of /var/abs/extra/nasm folder ..  the nasm.install was still in the folder.
    Explains why I couldn't find the answer on Google. 
    Last edited by dwardca (2013-07-06 04:44:13)

  • Target 'install' does not exist in this project ",this is the error i get..

    i get this error when i try to install ,with the command : ant install,
    a webservice on tomcat, and when i type
    ant install it gives me this error:
    " Target 'install' does not exist in this project "
    i have a file in the same directory with the build.xml named install.xml
    and when i type ant build there is no error but by tiping ant install the error above occurs!

    ant install will execute the target install. As you did not define the build file, the standard one is taken: build.xml.
    These options could be of interest for you:
      -buildfile <file>      use given buildfile
        -file    <file>              ''
        -f       <file>              ''

  • Target 'install' does not exist in this project (TOmcat)

    i get this error when i try to install a webservice on tomcat, and when i type
    ant install it gives me this error:
    " Target 'install' does not exist in this project "
    i have a file in the same directory with the build.xml named install.xml
    and when i type ant build there is no error but by tiping ant install the error above occurs!
    Message was edited by:
    TheBeginner_77

    ant install will execute the target install. As you did not define the build file, the standard one is taken: build.xml.
    These options could be of interest for you:
      -buildfile <file>      use given buildfile
        -file    <file>              ''
        -f       <file>              ''

  • Installing from an Existing ISO Image

    I would like to install and configure an Arch Linux system inside a virtual machine and then deploy that image to my laptop as a complete, working system. Is this at all possible? I saw things on the wiki about installing from an existing Linux installation that pointed suggestively in the direction I wanted to go, but it’s not clear to me whether this is doable or how to go about it.
    Archiso allows one to create custom bootable media, sure, but, as I understand it, you have to know exactly which packages you want beforehand. You can’t run the system and tinker with it before deploying. Would it make sense to configure the system in a virtual machine and then use that VM’s package list and /etc directory with archiso to make the custom system?

    Hi, welcome to Arch. Installing Arch from an existing installation means, if you have Ubuntu installed and want to install Arch from that installation.
    If you want to use a VM as your host system, then you need to clone/image the system and restore that image to your host, you can use clonezilla for that.
    I use archiso almost on a daily basis, it's very handy to try new things, e.g. a completely different setup from the one you have now. It's no problem to use the package list you made for archiso, for your future system.
    I don't see a problem in which packages you should choose beforehand, this mostly is a evolving thing, at least that's how I see it. So, if you have a working archiso, you are adjusting the configs, try it, and add the diff's to your build files, build you ISO, again try, add diff's to build files etc. etc. etc. , you get the point? Happy arching;)

  • How to Install 11i on existing 10g and APEX setup

    Dear All,
    I am planning to install 11i EBS on my XP machine that already has oracle 10g and apex 3.2 installed. I am little worried that my lack on experience with EBS may end up me messing-up my existing database and setup. I am new to EBS but have good experience with Oracle database. I am looking for some pointers that will guide me to safer landing with 11i installation. Can you please advise what steps/precautions I need to consider before installing 11i on existing 10g database?
    Thanks
    Aali

    Hi ali;
    I am planning to install 11i EBS on my XP machine that already has oracle 10g and apex 3.2 installed. I am little worried that my lack on experience with EBS may end up me messing-up my existing database and setup. I am new to EBS but have good experience with Oracle database. I am looking for some pointers that will guide me to safer landing with 11i installation. Can you please advise what steps/precautions I need to consider before installing 11i on existing 10g database?I belive you can make this installation but i wonder your XP machine can run all those in same time? I suggest use Wmware or oracle Wm and make installation on it.
    Regard
    Helios

  • Installing isqlplus for Solaris 8/Oracle 9i

    Does anyone know how I can install isqlplus for Solaris 8? It does not seem to be installed with the Oracle 9.0.1 Enterprise Ediition full installation.
    Thanks.

    Did you resolve this issue?

  • Hi Guys, best process is upgrade or a fresh install for already existing solution manager?

    Hi Guys, best process is upgrade or a fresh install for already existing solution manager to SAP 7.1?

    Hi
    Have you checked below link or presentation..it might help you to get more relevant inputs for decision
    Upgrade to SAP Solution Manager 7.1
    also incase you have charm or service desk check my blog as well.
    Upgrade Roadmap - Solution Manager 7.0 to 7.1 with Service Desk/ChaRM
    Hope this helps
    Thanks
    Prakhar

  • Trying to re install Photshop elements6 on my new computer. Error message reads  Installer database is corrupt

    Trying to re install Photshop elements6 on my new computer. Error message reads  Installer database is corrupt

    Rainstormn please see Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 4 or point product for information on how to resolve your current error.  In the future please only transfer your documents and settings to your new computer.  You can then install any needed applications.

  • New install not accessing existing library on D: drive.

    My iTunes library is much larger than my entire SSD I use as a boot volume, so of course I keep it on a second internal hard drive labeled D:.
    I just had my system corrupted and all backcup images not read by restore discs, so I had to wipe my C: SSD and re-install my Windows 7, 64-bit OEM from scratch.  Now, with a new install of iTunes, I can't seem to get it to recognize my existing library on my D: drive.  I've pointed it there in preferences both to the iTunes folder and the iTunes Library folder inside it on the drive.  I can open any individual item with iTunes separately and add that to my library separately, but no matter what, this thing just seems to ignore my existing content completely.  Nothing shows in my library within the program but the few nonsense songs that came with some software somewhere.
    I at first thought it was finding my TV shows, but it turns out that was only on the cloud.  I don't want to depend on some cloud server for my content I've bought and paid for when I have it stored in redundant hard drives of my own.  I need this to access my content on the drive I've selected for it, including my existing content already there.

    OK, I got the menu  bar open and found an article in "help" that said to drag the existing library folder into the iTunes window and that got my stuff into the software, but how can I be sure that new purchases go into the proper folder on my D: drive rather than into some C; drive location.  I have a terrabyte D: drive that is already red in Windows Explorer and still has more space left than this SSD I'm using as a C: drive had blank.

  • Installing Windows on existing bootcamp partition

    Hi,
    My iMac is 4 years old. When i first set it up i created a partition called BOOTCAMP 211 Gb in size. I was unsure how to run Windows products on my iMac but ended up buying and using Parallels successfully until now. But there have been so many updates to Parallels and each at a cost that i am trying to find another way to run windows cheaper and possibly faster.
    I was going to install Windows to BOOTCAMP but I'm not sure how to of about it and if it will damage my OS in anyway now that it is not being done as part of setup. I don't have my windows disk but have my Windows 7 Professional Key that i was using with Parallels.
    I was proposing to do the following.
    1. Download from microsoft the iso image for Windows 7 Professional. How do i install to the BOOTCAMP partition if its a file of type ISO? Doing this won't affect my MAC OS?
    2. I was then going to activate using my existing key.
    3. It should run as with Parallels and possibly faster, correct?
    Really appreciate your help with this.
    Thanks,
    Mike

    If you iMac has a built-in Optical drive (or originally had one), you will need to burn the ISO you download to a physical DVD.
    Use Bootcamp Assistant to partition (if necessary), or use the existing partition. If there is an issue, the partition can be manually cleaned up, if necessary.
    I suggest starting at How to install Windows using Boot Camp - Apple Support .

  • NW2004s MCOD install not detecting existing Oracle instance

    We are attempting to perform a distributed database installation for
    NW2004s AS-JAVA. We wish to use an existing SAP/Oracle database
    called "JB1" running on Oracle/HP-UX using MCOD. The JB1 database instance
    already contains a functioning NW2004s SAP AS-JAVA system.
    We execute sapinst on the UNIX database host and
    choose a Distributed Oracle DB installation. We enter the SAP SID
    as "PD2" and the database SID as "JB1". However, it appears that
    sapinst is not recognizing that the JB1 instance is already in
    existence.
    In our first attempt, sapinst removed all the redo logs and re-created
    them, then attempted to perform a "CREATE DATABASE" command. This did
    not seem to be the behavior we wanted for simply adding another schema
    for the PD2 system. We restored the JB1 database from backup and are
    now trying to run sapinst again.
    I am seeing entries in the sapinst_dev.log that indicate:
    "Oracle database exist: false"
    Also, it appears from the ora_sql_results.log file that sapinst is not
    correctly connecting to JB1 as sqlplus returns "connected to an idle
    instance".  It appears the subsequent SQL script which selects from V$INSTANCE comes back with no entries which then causes sapinst to think there is no existing JB1 instance.
    The JB1 database is running when we start sapinst and we are able to
    connect as sysdba from the orajb1 account.
    My assumption is that sapinst should not be trying to re-create the JB1
    database and that it is simply unable to detect that it already exists
    and should be doing an MCOD install. Can anyone assist in determining why
    sapinst cannot connect with sqlplus?
    Regards,
    Mike Tarr

    I have determined that if the JB1 database is shut down when I start
    sapinst, then sapinst will attempt to start it and detects the instance
    successfully. Should the existing database not be running when SAPINST is started for an MCOD install? It seems that there is still a problem with SAPINST connecting to the running JB1 instance.

  • Installing NWDI in Existing SAP Portal

    hi experts,
    My project currently require to retrieve and modify ESS (personal information) standard code since the standard personal information in ESS will not meet our requirement.
    I found out that i need NWDI installed in our environment in order to retrieve ESS (personal information) standard code.
    my consideration is that we already implement several custom ESS using NWDS for SAP Portal.
    By installing NWDI, will it have any impacts to existing custom ESS (using NWDS)?
    I already tried to search through forum, but haven't find the answer.
    Thanks in advance

    Dear Rica,
    Download the NWDI Component from service market place with same version and SP level.
    DTR
    CBS
    CMS
    SLD
    Deploy the NWDI component througth SDM or JSPM. Once finished you can access with http://<Host>:<Port>/devinf
    For designing track for ESS/MSS, refer to the JDI cookbook. for your custom development you can migrate to the NWDI.
    Refer to SDN Page for NWDI [Click Here |SAP NetWeaver Development Infrastructure (NWDI)]for more details.
    Hope it will helps
    Best Regards
    Arun Jaiswal

  • Installing KM on existing EP 6.0 SP11 system

    Hi Friends
    A) We're running EP 6.0 SP11 on top of J2EE engine stack SP11, we have a requirement to install KM to our dev systems, our installation media is for SR1, I want to know if I can proceed with installing KM in this environment & later upgrade our KM from SP9 to SP11(after downloading the SP11 for KM from SAP marketplace). I heard a comment that we need to go back to SR1 & install portal & KM together. (This is something which is out of question for us, so I want to seek your opinion). Has anybody had a similar experience, if yes pls let me know how you installed KM
    Also pls let me know if there is some SAP notes/document on the same which contains SAP's recommendation in terms of installing KM on an existing Portal system.
    B) For applying SP11 for CM+colloboration 6.0_640, SAP NW04, SP stack 11 guide mentions about 4 files
    1. EP6KMC<SP>_<PL>.SAR,
    2. EP6CTRL<SP>_<PL>.SAR,
    3. EP6TOOLS<SP>_<PL>.SAR &
    4. SAPINST<SP>_<PL>.SAR
    For applying SP11 for Portal Platform 6.0_640, SAP NW04, SP stack 11 guide mentions about 4 files
    1. EP6CTRL<SP>_<PL>.SAR,
    2. EP6TOOLS<SP>_<PL>.SAR
    3. EP6PORTAL<SP>_<PL>.SAR &
    4. SAPINST<SP>_<PL>.SAR
    It appears to me that the files EP6CTRL<SP>_<PL>.SAR, EP6TOOLS<SP>_<PL>.SAR & SAPINST<SP>_<PL>.SAR are the same as the ones used for applying SP11 for Portal, can anybody confirm if these 3 files are common for applying SP11 for Portal & CM.
    Thanks & Rgds,
    Abhishek

    I was able to install KM SP9 on Portal SP11. Please remember, Portal is just a app running on WebAS. KM is another application runs on WebAS and talks to Portal. I do not see any hard dependency unless KM says there is one.
    Our installation is successfull and no issues.
    There is no need to install Portal and KM together. I am very sure about it.
    You can install KM and TREX after you install Portal.

  • How to install java on existing Ecc6.0 EHP5 system

    Dear Colleagues,
    I have ECC6.0 EHP5 dual stak system installed already. Due to some problems with Java now, I have to install fresh Java part on this existing system.
    Do I need to uninstall Java? Is this possible on this version?
    Can anyone let me know the procedure and how to proceed on this?
    Best Regards,
    Prasad

    Hi,
    Plz see the below link:
    Delete Java Stack & Re-Install
    Cheers,

Maybe you are looking for