Installing ITS on a host with MULTIPLE IP'S

i need to install the 4 ITS instances (Admin, R/3,B/W & SEM) on on ehost with 4 IP's.... each IP has been assigned to a web site on the IIS (which will be used to access the ITS)...
how do i do this ???????

You can either use different IP addresses for each ITS instance or use port numbers to differentiate the instances. When you install ITS, simply specify the website it gonna reside. Since you are hosting 4 instances with different IPs on the same box, you need to udate the hosts files with these information for proper name resolution and also in DNS if you may use in your organization.

Similar Messages

How to configure one TREX host with multiple index servers ?

Hi All,
Does anyone know how to configure TREX on the one host,
with multiple index servers ?
Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
our KM content for portal users.
I am using TREX 7 and have not been able to do this,
despite reading the Single and Distributed install
documentation.
Any help would be appreciated.
Regards,
Andres

Hi Andres,
To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
Proceed like this:
1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
2. In TREXdeamon.ini go to
[daemon]
references sections below
programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
Go to the last two columns and move the indexes (move master here/secondary mouse click)
If you don't distribute the indexes the new index server process will be regarded when an new index is created.
Hope this helps!
cheers
Bettina

How to confiture virtual hosts with multiple domain names

hello,
I've read through some of the postings here on virtual hosts, but I thought I'd better solicit advice before I actually try some of the things I've read about.
In a nutshell, I've purchased multiple domain names that I'd like to alias to a new site (currently it is just a subfolder in the main site directory) on my OS 10.3.x server. There is only the one main site configured right now on the box, so I know I need to set up a second "virtual site" pointing to the files in this subfolder to make it function as its own site.
I've dabbled around with the sites settings in the GUI, but I'd probably be most comfortable setting all this up in the httpd.conf by hand if I could. But I'm weary of this because I know it might be better to use the GUI because of OS X Server's flavor of WebObjects and Apache (sigh).
So, I have two main questions:
1) How would I set up this second site using the GUI in server settings? Do I need to first move the subfolder out of the main folder before it can be designated its own site? Or can I just point to it in the GUI? Can I use one of my purchased domain names in the domain field?
2) Currently, I have URL Forwarding set with my multiple domain names, but I'm thinking there might be a better way to do this? For SEO I'd rather use some type of redirect rather than being penalized by search engines for having what looks to be multiple domains pointing to the same site.I'm thinking I should create virtual sites for each domain name I've purchased with a hard redirect back to the main site?
Any suggestions would be appreciated.
Thanks
G4 Mac OS X (10.3.9) 10.3.9 Server
G4 Mac OS X (10.3.9) 10.3.9 Server

thank you for your reply.
> You can create each site as a new Site in Server
Admin. When you do this you can choose any
directory on disk as the document root for each
site.This means you can move the sites' folders out of
/Library/WebServer/Documents if you like - you could
create /Library/WebServer/site1,
/Library/WebServer/site2, etc. (or even be outside of
/Library/WebServer if you want).
so, are you are saying that I could designate one site to be
/Library/WebServer/Documents/site1
and another to be
/Library/WebServer/Documents/site1/directory1
even though directory1 is contained within site1's structure? I'm not advancing this as a good idea, necessarily. I'm just wondering if Apache would complain.
> Each site should have the domain name set as per your
registered domains. Apache will need this to
determine the correct site to serve for each
request.
Well, after some additional research I'm thinking I'm missing a critical piece of the puzzle. That being access to the DNS host server that manages the context of my server. I have purchased domain names through an outside registrar that point to my site and I can create virtual hosts on my server, but I don't have the ability to add the new virtual host names into the DNS server that manages my box. If that makes sense. Or maybe I'm missing something?
>
I'm not sure why you're using URL forwarding at all.
Without that piece of information it's impossible to
tell you whether you should continue using them or
not - in general there's no need to use URL
forwarding if you have multiple Virtual Hosts setup,
but it sounds like you have multiple hostnames
pointing to the same content, so your needs may be
different.
I'm using forwarding for the reason I list above. I didn't purchase hosting with the registrar where I purchased my domain names, so they are parked on the registrar's name server with URL forwarding to my server. The DNS server that manages my box resides in a different location and I don't have the ability to add DNS entries pointing to virtual hosts that I want to set up. Am I stuck?
G4 Mac OS X (10.3.9) 10.3.9 Server

Siebel 8.1.1.8 upgrade from 8.1.1.0 - host with multiple components

Hi all,
I'm running some tests of an update from Siebel SIA 8.1.1.0 to 8.1.1.8 in preparation for a Production upgrade. Our entire estate is Windows based, currently running Windows Server 2008. The update is not working as I expected.
On one machine I have the Gateway and a Siebel Server (Object Manager). On another machine, I have a Siebel Server (eDocument).
- Upgrading the single server (eDocument) using the new OUI installer seems to work fine
- Upgrading the host with Gateway AND Siebel Server (Object Manager) seems to fail - where a DLL exists in both Gateway AND Server (i.e. sssaadmn.dll), only the Gateway DLL gets updated
The result is that the Siebel Server (Object Manager) on the same host as the Gateway fails to start, with 'cannot load xxx.dll' appearing throughout the server and component logs. The single server (eDocument) seems to start fine with all components showing as 'Running' and visible through srvrmgr.
Has anyone performed an update with the 8.1.1.8 OUI based installers and had a similar problem? Any idea how to resolve?
Thanks for your thoughts!
Oli

Hi all,
Looks like OUI can't cope with files with the Windows 'read only' attribute set. It will simply skip them altogether, without error. :(
Anyway, unsetting the read only attribute across the SBA81 folder, prior to running the upgrade, seems to have resolved the problem for us.
Regards,
Oli

Excessive system CPU time on Solaris 10 host with multiple zones

We current have three T2000s running Solaris 10 with all of the latest patches installed. Each machine is identically configured with a single, 1.2GHz 8-core CPU & 32GB RAM. Two of the three are in our production environment and have three zones serving users' needs (Oracle app servers, to be specific).
The third server is our test environment, and it hosts 5 zones. Four of the five zones are similar to those in our production environment (running Oracle or other J2EE app servers). The fifth zone is running eight Oracle RDBMS instances - seven at 9.2, one at 10.2. As this is a test environment, those instances are configured to use a modest amount of system resources.
We are seeing an odd behavior that at first blush appeared to imply that we had put too much on this single server. However, after looking into it more closely, I'm now thinking that what we are seeing may in fact be some sort of OS issue.
Specifically, when monitoring the server load in the global zone, we will see sudden spikes in the load factor, jumping above 20.00 and staying there for a minute or two, then dropping down to 3.00-6.00. During the time that the load is very high, vmstat reveals that an inordinate amount of CPU time is being spent in the kernel.
For example:
kthr      memory            page            disk          faults      cpu
r b w   swap free si so pi po fr de sr m1 m1 m1 m2   in   sy   cs us sy id
0 0 0 62970776 1092640 0 0 0 3 2 0 0 0 0 0 0 3056 21548 5902 4 3 93
0 0 0 62974184 1094632 0 0 0 8 6 0 0 0 0 0 0 3000 17155 5755 3 1 95
0 0 0 62971736 1091760 0 0 0 3 2 0 0 0 0 0 0 2982 20254 5754 4 2 94
0 0 0 62974080 1094424 0 0 0 3 2 0 0 0 0 0 0 3041 18316 5842 4 1 95
0 0 0 62967808 1088256 0 0 0 3 3 0 0 0 0 0 0 3250 18788 6118 4 11 85
0 0 0 62880504 1081528 0 0 0 2 2 0 0 0 0 0 0 3673 14910 6549 3 31 66
0 0 0 62899936 1078272 0 0 0 0 0 0 0 0 0 0 0 3415 14216 6069 4 33 63
0 0 0 62928744 1075224 0 0 0 5 5 0 0 0 0 0 0 4100 14889 7592 4 50 46
1 0 0 62870280 1068096 0 0 0 0 0 0 0 0 0 0 0 4388 12581 8186 5 74 21
5 0 0 62860552 1062064 0 0 51 0 0 0 0 0 0 0 0 4856 12904 9275 5 79 17
11 0 0 62837472 1054064 0 0 0 5 5 0 0 0 0 0 0 4350 11576 9084 4 89 7
15 0 0 62860376 1045088 0 0 0 0 0 0 0 0 0 0 0 4491 10718 8954 4 93 3
19 0 0 62828208 1034744 0 0 0 2 2 0 0 0 0 0 0 4392 10194 9308 4 93 3
5 0 0 62884880 1029232 0 0 0 5 5 0 0 0 0 0 0 4860 10864 9716 5 93 2
0 0 0 62888088 1026552 0 0 0 0 0 0 0 0 0 0 0 4551 11987 8814 5 88 7
0 0 0 62861944 1014688 0 0 0 0 0 0 0 0 0 0 0 4612 13246 8972 5 91 4
1 0 0 62866912 1009992 0 0 2 5 5 0 0 11 11 11 0 4551 15213 9024 6 91 3
0 0 0 62911632 1043184 0 0 88 3 3 0 0 4 2 2 0 4105 42573 7913 12 42 46
0 0 0 62962560 1082128 0 0 13 2 2 0 0 5 3 2 0 3107 19107 5853 4 2 94Note that when the load first spikes, there are very few jobs in the run queue. Of course, as the kernel monopolizes more and more of the CPU time, the number of jobs in the run queue builds until such time as the kernel relinquishes the CPU and the user jobs are serviced.
I have never seen this kind of vmstat output in the 20 years that I've been administering Sun servers, though I must admit that these three T2ks are the first multi-core, zoned machines that I have experience with.
So do I have something configured wrong, do we have too many services configured for this one machine to handle, or is there indeed and OS issue involved here?
Thanks,
Bill

Darren,
Thanks for the feedback. I ran the hotkernel script on both a low-loaded and a higher loaded system (only saw my sys time reach about 60% compared to the 90+ I was seeing yesterday). Here are the 10 most frequently called kernel functions on the normal system:
SUNW,UltraSPARC-T1`bcopy                                 1016   0.1%
unix`mutex_vector_enter                                  1059   0.1%
unix`disp_getwork                                        1093   0.1%
unix`page_freelist_coalesce                              1512   0.2%
zfs`fletcher_2_native                                    1519   0.2%
SUNW,UltraSPARC-T1`copyin                                1546   0.2%
SUNW,UltraSPARC-T1`copyout                               1602   0.2%
unix`page_trylock                                        1789   0.2%
unix`mutex_enter                                         1848   0.2%
unix`cpu_halt                                          762334 95.3%Here's the top 10 when the system is getting pounded:
unix`disp_getwork                                         495   0.1%
unix`page_freelist_coalesce                               525   0.2%
unix`page_geti_contig_pages                              6637   2.0%
unix`page_unlock_noretire                               10124   3.0%
unix`mutex_exit                                         10652   3.1%
unix`page_trylock_contig_pages                          11461   3.4%
unix`mutex_vector_enter                                 12785   3.8%
unix`mutex_enter                                        14907   4.4%
unix`page_trylock                                       50461 14.9%
unix`cpu_halt                                          211391 62.2%Any thoughts as to what this implies?
Thanks,
Bill

Installing CRM Online for Outlook with multiple profiles

For a number of reasons I have had to create multiple profiles in Outlook. I also have a Microsoft CRM account. Up to this point I have been able to successfully install and use CRM for Outlook on my previous profiles. However, when the last profile was
created the CRM for Outlook functionality did not install. / transfer. I have tried uninstalling the CRM for Outlook and reinstalling. No luck it only crashed an old profile which appears now to be inoperable. It is essential that I get the latest Profile
working the CRM for Outlook Any suggestions?

Hi,
As per the description, I understand that it's an issue about CRM Online for Outlook.
This is the forum to discuss questions and feedback for Microsoft Office client. To get better assistance, I would suggest you to post in
Microsoft Dynamics CRM Forum, where you can get more experienced responses:
https://community.dynamics.com/crm/f/117.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Host with multiple AS2 Indentifiers

Hello all,
Is it possible in Oracle B2B to have multiple AS2 identifiers for the host trading partner? We have a customer that has multiple divisions; each division has their own AS2 Identifier/DUNS/etc. We would like to do this without setting up multiple instances of the B2B server - is this possible?
John

Hi Ramesh,
I'm in the same boat as John. To be precise, IHAC who wants to host both of their enterprises on the same instance of Oracle Integration. This way, they not only reduce total cost of deployment but also allow for sharing of document types across the two enterprises.
Questions:
1) Does your approach imply that document types cannot be shared across the dual hosts? Does it only work for outbound transactions? What if the dual hosts can act as both initiator and responder of the transaction?
2) To support exchange type of models, some competing vendors allow you to create multiple logical trading partner hosts in a single b2b deployment (I know for a fact that webMethods Trading Networks does). Can we simulate that behavior by creating two "Trading Partner Identifications" for the host TP (It looks like the TP create page does let you do that.) If so, can I create two TP IDs of the same type for the same TP?
In general, if you could shed more light on your previous note, especially with a tech note or something, that'd be great.
Regards,
Karthick

Installing i-Pod/i-Tunes with multiple desktop identities

Can anybody help with this problem please? When I try to install the standard software using the cd-rom provided with my new i-Pod, 2 separate error messages repeatedly come up at different points in the process, depending on how far it gets. The first one (code 1904 I think) refers to the already-installed i-Pod/i-Tunes on my sister's desktop identity. (This is also a fairly new installation). The puzzling thing is that her i-Tunes works perfectly, but I still can't install my own dedicated software (we don't want to share our music files on a single installation).
My sister is also reluctant to uninstall her software as part of the solution to my problem, since she has over 700 songs on it already. The second error report (much further on in the Setup process) states :- error no. 0x800400707 description : Dll function call crashed : ISRT.VerGetFile Version. Setup will now terminate. Any help would be most appreciated. Thanks.
IBM compatible Windows XP

Hi there,
I am wondering if you are still having your
problem?
I try to install the software on my computer and
it
gives me the same error message and then says
access
denied. Just seeing if you have figured yours out.
Hi Sawicki,
I'm afraid I am still no further forward. Unless I am
missing the point from the visible replies already
posted, none of the suggestions actually correctly
address the specific nature of the problem (which is,
in simple terms, the fact that the software was
installed on one identity and continues to work fine.
However, all attempts to install the same software on
another identity meet with the problems which I
originally posted). Aarrgh! Help!
Can you throw any light on the other point I was
making about not seemingly being able to get
technical support directly from the Apple website?
Best Wishes.
IBM
compatible Windows XP
Hi Sawicki,
Did you see the eventual solution to my problem? If not, check it out! (Provided by Buegie/Natalie Beresford).
Best Wishes

Mail address lookup in shared hosting with multiple address lists setup

Hi, we have an Exchange 2013 environment for hosting purposes.
One client uses two seperate company names (and domain names). These companies are seperated in Exchange and use seperate address lists. This client uses mail between the two domains.
Let's say the domains are yin.com and yang.com. The users use Outlook Webmail and the Mac OSX builtin mailclient
The problem is that when [email protected] sends email to [email protected], Bob is able to receieve the mail, but the email-address from Kevin is not included in the mail. It is just listed as Kevin, without any property.
When Bob replies to the message from the OSX Mail client, it apparently tries to make up an address and generates something to the effect of this:
Kevin </o=Hosting Company/ou=Exchange Administrative Group /cn=Recipients/cn=*longnumber*>
This address is not correct and when sent, the email is bounced back with a NDR-report.
When Bob replies to the message from OWA, the address is simply the name with no email-address. This also results in an NDR report.
What can we do to make OWA or Mac mail keep the correct emailaddresses?

Hi Nithyanandham,
1. The cached addresses were removed, had no effect.
2. Typing the address manually ([email protected]) works.
3. Sending mail to an additional smtp address also works.
4. Originally Kevin has one smtp address on his mailbox. There are no errors in them.
5. This happens for all users who are sending mail between these two companies/address lists.
6. Output of this command is as follows (replaced usersnames and domainnames to protect the innocent)
[PS] C:\Windows\system32>get-mailbox -identity "Kevin"|fl
RunspaceId : 2407ca9f-7e5a-466e-9230-d55c8e804380
Database : MailBoxDB001
Location :
UseDatabaseRetentionDefaults : True
RetainDeletedItemsUntilBackup : False
DeliverToMailboxAndForward : False
IsExcludedFromServingHierarchy : False
LitigationHoldEnabled : False
SingleItemRecoveryEnabled : False
RetentionHoldEnabled : False
EndDateForRetentionHold :
StartDateForRetentionHold :
RetentionComment :
RetentionUrl :
LitigationHoldDate :
LitigationHoldOwner :
LitigationHoldDuration : Unlimited
ManagedFolderMailboxPolicy :
RetentionPolicy :
AddressBookPolicy : yin_ABP
CalendarRepairDisabled : False
ExchangeGuid : 23d17a76-cc3d-40db-ada7-5d72aa14384a
MailboxContainerGuid :
AggregatedMailboxGuids : {}
ExchangeSecurityDescriptor : System.Security.AccessControl.RawSecurityDescriptor
ExchangeUserAccountControl : None
AdminDisplayVersion : Version 15.0 (Build 847.32)
MessageTrackingReadStatusEnabled : True
ExternalOofOptions : External
ForwardingAddress :
ForwardingSmtpAddress :
RetainDeletedItemsFor : 14.00:00:00
IsMailboxEnabled : True
Languages : {nl-NL}
OfflineAddressBook :
ProhibitSendQuota : Unlimited
ProhibitSendReceiveQuota : Unlimited
RecoverableItemsQuota : 30 GB (32,212,254,720 bytes)
RecoverableItemsWarningQuota : 20 GB (21,474,836,480 bytes)
CalendarLoggingQuota : 6 GB (6,442,450,944 bytes)
DowngradeHighPriorityMessagesEnabled : False
ProtocolSettings : {MAPI§1§§§§§§§, IMAP4§1§§§§§§§§§§§§, HTTP§1§1§§§§§§, OWA§1, POP3§1§§§§§§§§§§§§
RecipientLimits : Unlimited
ImListMigrationCompleted : False
IsResource : False
IsLinked : False
IsShared : False
IsRootPublicFolderMailbox : False
LinkedMasterAccount :
ResetPasswordOnNextLogon : False
ResourceCapacity :
ResourceCustom : {}
ResourceType :
RoomMailboxAccountEnabled :
SamAccountName : YIN-KBN
SCLDeleteThreshold :
SCLDeleteEnabled :
SCLRejectThreshold :
SCLRejectEnabled :
SCLQuarantineThreshold :
SCLQuarantineEnabled :
SCLJunkThreshold :
SCLJunkEnabled :
AntispamBypassEnabled : False
ServerLegacyDN : /o=Tao Hosting Services/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)
/cn=Configuration/cn=Servers/cn=PHSSV1-005
ServerName : phssv1-005
UseDatabaseQuotaDefaults : False
IssueWarningQuota : Unlimited
RulesQuota : 64 KB (65,536 bytes)
Office :
UserPrincipalName : [email protected]
UMEnabled : False
MaxSafeSenders :
MaxBlockedSenders :
NetID :
ReconciliationId :
WindowsLiveID :
MicrosoftOnlineServicesID :
ThrottlingPolicy :
RoleAssignmentPolicy : Default Role Assignment Policy
DefaultPublicFolderMailbox :
SharingPolicy : Default Sharing Policy
RemoteAccountPolicy :
MailboxPlan :
ArchiveDatabase :
ArchiveGuid : 00000000-0000-0000-0000-000000000000
ArchiveName : {}
JournalArchiveAddress :
ArchiveQuota : 100 GB (107,374,182,400 bytes)
ArchiveWarningQuota : 90 GB (96,636,764,160 bytes)
ArchiveDomain :
ArchiveStatus : None
ArchiveState : None
RemoteRecipientType : None
DisabledArchiveDatabase :
DisabledArchiveGuid : 00000000-0000-0000-0000-000000000000
QueryBaseDN :
QueryBaseDNRestrictionEnabled : False
MailboxMoveTargetMDB :
MailboxMoveSourceMDB :
MailboxMoveFlags : None
MailboxMoveRemoteHostName :
MailboxMoveBatchName :
MailboxMoveStatus : None
MailboxRelease :
ArchiveRelease :
IsPersonToPersonTextMessagingEnabled : True
IsMachineToPersonTextMessagingEnabled : True
UserSMimeCertificate : {}
UserCertificate : {}
CalendarVersionStoreDisabled : False
ImmutableId :
PersistedCapabilities : {}
SKUAssigned :
AuditEnabled : False
AuditLogAgeLimit : 90.00:00:00
AuditAdmin : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, FolderBind, SendAs,
SendOnBehalf, Create}
AuditDelegate : {Update, SoftDelete, HardDelete, SendAs, Create}
AuditOwner : {}
WhenMailboxCreated : 22-1-2014 10:12:00
SourceAnchor :
UsageLocation :
IsSoftDeletedByRemove : False
IsSoftDeletedByDisable : False
IsInactiveMailbox : False
IncludeInGarbageCollection : False
WhenSoftDeleted :
InPlaceHolds : {}
Extensions : {}
HasPicture : False
HasSpokenName : False
AcceptMessagesOnlyFrom : {}
AcceptMessagesOnlyFromDLMembers : {}
AcceptMessagesOnlyFromSendersOrMembers : {}
AddressListMembership : {\yin_GAL, \yin_AL, \Mailboxes(VLV), \All Mailboxes(VLV), \All Recipient
s(VLV), \Default Global Address List}
Alias : kevin_yin.com
ArbitrationMailbox :
BypassModerationFromSendersOrMembers : {}
OrganizationalUnit : phs.local/Hosting/yin
CustomAttribute1 :
CustomAttribute10 :
CustomAttribute11 :
CustomAttribute12 :
CustomAttribute13 :
CustomAttribute14 :
CustomAttribute15 :
CustomAttribute2 : yin
CustomAttribute3 :
CustomAttribute4 :
CustomAttribute5 :
CustomAttribute6 :
CustomAttribute7 :
CustomAttribute8 :
CustomAttribute9 :
ExtensionCustomAttribute1 : {}
ExtensionCustomAttribute2 : {}
ExtensionCustomAttribute3 : {}
ExtensionCustomAttribute4 : {}
ExtensionCustomAttribute5 : {}
DisplayName : Kevin
EmailAddresses : {X500:/O=TAO HOSTING SERVICES/OU=EXCHANGE ADMINISTRATIVE GROUP /CN=RECIPIE
NTS/CN=665EE4639A4D47ABAB470761E386AF05, SMTP:[email protected]}
GrantSendOnBehalfTo : {}
ExternalDirectoryObjectId :
HiddenFromAddressListsEnabled : False
LastExchangeChangedTime :
LegacyExchangeDN : /o=Tao Hosting Services/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)
/cn=Recipients/cn=665ee4639a4d47abab470761e386af05
MaxSendSize : Unlimited
MaxReceiveSize : Unlimited
ModeratedBy : {}
ModerationEnabled : False
PoliciesIncluded : {}
PoliciesExcluded : {{26491cfc-9e50-4857-861b-0cb8df22b5d7}}
EmailAddressPolicyEnabled : False
PrimarySmtpAddress : [email protected]
RecipientType : UserMailbox
RecipientTypeDetails : UserMailbox
RejectMessagesFrom : {}
RejectMessagesFromDLMembers : {}
RejectMessagesFromSendersOrMembers : {}
RequireSenderAuthenticationEnabled : False
SimpleDisplayName :
SendModerationNotifications : Always
UMDtmfMap : {reversedPhone:63900611613+, lastNameFirstName:8262522337367653, firstNameLast
Name:7653826252233736, emailAddress:7653}
WindowsEmailAddress : [email protected]
MailTip :
MailTipTranslations : {}
Identity : phs.local/Hosting/yin/Kevin
IsValid : True
ExchangeVersion : 0.20 (15.0.0.0)
Name : Kevin
DistinguishedName : CN=Kevin,OU=yin,OU=Hosting,DC=phs,DC=local
Guid : f9ac1bfa-e174-4922-86a9-7698f30ac54e
ObjectCategory : phs.local/Configuration/Schema/Person
ObjectClass : {top, person, organizationalPerson, user}
WhenChanged : 20-11-2014 12:42:16
WhenCreated : 14-1-2014 13:05:03
WhenChangedUTC : 20-11-2014 11:42:16
WhenCreatedUTC : 14-1-2014 12:05:03
OrganizationId :
OriginatingServer : PHSSV1-001.phs.local
ObjectState : Unchanged
[PS] C:\Windows\system32>

Using authorized-hosts with multiple NICs

I'm trying to limit cluster/grid membership using the authorized-hosts attribute, and I need to specify which Ethernet port is used when I start Coherence (or which one(s) to ignore). We have a "private" network setup that we want to run Coherence on, and the default NIC/port 0 is not part of that network.
So I need to tell Coherence to use a specific port when it starts and not just the first IP port/address it finds. Is there a way to specify which NIC/IP address Coherence uses when it creates/joins the cluster?
Following is the override file I place into tangosol-coherence-override.xml. This file is in the classpath before coherence.jar when i start my JVM.
<?xml version='1.0'?>

<coherence xml-override="/tangosol-coherence-override.xml">
<cluster-config>
     <authorized-hosts>
     <host-address id="1">172.16.1.1</host-address>
     <host-address id="2">172.16.1.2</host-address>
     <host-address id="3">172.16.2.1</host-address>
     <host-address id="4">172.16.2.2</host-address>
     </authorized-hosts>
</cluster-config>
</coherence>
Thanks in advance for your help.
Stacy Maydew

Hi Stacy,
it is possible to bind all Coherence traffic to a single network interface using the -Dtangosol.coherence.localhost=xxx.yyy.aaa.bbb and -Dtangosol.coherence.localport=xyzab which specifies which ip address and port to use for sending and receiving.
Alternatively you can use an operational configuration override file which specifies the unicast-listener configuration element (see the link for more information).
You may would also need to specify the -Djava.net.preferIPv4Stack Java property if your operating system/kernel also has IPv6 enabled and you want to use an IPv4 address, otherwise we saw packets lost due to them travelling on different interfaces.
Best regards,
Robert

Install GC Agent on host with GC repository database.

Hello,
I have a couple questions about setting up a Grid Control environment. We are doing a proof of concept for grid control. We currently have two linux servers, one for the repository database (11gR2), and one for the Grid Control/OMS(10gR5).
My question is can we install the GC Agent on the repository database server?
I would like to monitor the repository database server and the repository database itself, but is that possible?
I tried installing the agent on the repository db server and I thought it was a success, but when I run emctl agent status I get the following:
EM Configuration issue. /u01/app/oracle/product/11.2.0/phxoemdb.revenue.int_GRIDDB not found.
Should I use emca and configure the database? I'm worried it will mess with the Grid Control Repository tables.

Well, now that the post is active again, let me respond:
My question is can we install the GC Agent on the repository database server?There is already (or should be) a "Central Agent" on the OMS server. If the EM repository database is on a different server from the OMS, then you do need to install a regular agent.
I would like to monitor the repository database server and the repository database itself, but is that possible?This is definitely possible as long as there is an agent on the server, either the central agent or regular agent like on any other server.
I tried installing the agent on the repository db server and I thought it was a success, but when I run emctl agent status I get the following:If OMS is executing on the same server as the repository database, then there is already a central agent. Each component has it's own Oracle Home, maybe you are trying to execute the commands from a different home. You need to set the correct environment for each component when executing command related to that component.
:p

Final Cut Pro installed on an image interfearing with multiple LDAP Binds??

Hi guys, have an issue here a bit different from anything I have been able to find concerning binding to LDAP.
The situation is this: I am tasked with administering about 90 iMac's and 3 xServes in 3 labs in our school district. 30 of these machines have Final Cut Pro installed. Therefore I have 2 images created and successfully served by one of our xServes. The other xServe is didicated to Open Directory, and the 3rd is just a file share server. The non Final Cut Images have been applied and bound to LDAP and AD successfully, however, when it come sto the images WITH Final Cut Pro, I was only able to bind one machine to LDAP. The remainig machines tell me that the object allready exists (which it should not because these are all new machines and have never been bound, imaged, or configured in any way prior to this) and it gives me the option to "Overwrite". When I choose overwrite, it creates the machine in Workgroup Manager, but never bindes the machine to LDAP and gives me an "Unknown Error".
Now it seems to me, that this is a problem specific to Final Cut Pro. What do you guys suggest?
It is worth mentioning that we do have a vollume license for FC Pro and it is the default installation with no modifacations made to the install configuration.
I have also posted this issue in the xServe forums.

Look here - http://www.apple.com/universal/crossgrade/
And remember "Search" is your friend. This topic has been discussed ad nauseum on this forum.
K

Installing windows games with multiple discs

When I am trying to install a windows PC game with multiple discs, the install starts out ok, then it asks to insert disc #2. I'm using a Mac Mini, booted into Windows XP SP3. Since there is no manual disk eject button like on a PC machine, how can I eject the current disc in the Mini disk drive to be able to insert the next installation disc?

I guess when you boot into windows the disc eject key on the apple keyboard doesn't work. But, I found a solution! While installing the game and the message screen came up to install the next disc, I hit the apple/cmd key on my apple keyboard and it brought up the WinXP Start menu. I then opened up the My Computer window and right-clicked on the CD drive, clicked on eject and the disc popped out! I inserted the next disc and the install continued automatically.
I love being able to run Windows on my Mac. It makes using Windows sometimes almost bearable.

With Multiple Management Services, How BIg Is Your Shared Filesystem?

I am installing Grid Control 11.1 with multiple OMSs. Oracle uses a shared filesystem in this configuration for load balancing and fault tolerance. I want to know from anyone who has installed multiple OMSs: how much storage does Grid Contorl use in the shared file system in your implementation. Please also state how many targets are monitored. Thanks.

The size of the shared location is dependent upon:
1. How quickly agent files are processed - If your OMS are going to be down for awhile, size the location to support storing the files until processing can being and catch-up. The files are small but depending on the number of targets this can add up.
2. Usage of provisioning - Ensure you size to support all the various files used in your provisioning
We have several hundred targets, two OMS, and make limited usage of provisioning (software and agent installation images). We allocated an NFS share of 50GB but typical usage is <20GB, with 95% of that is due to the provisioning files.

Installing ODBC Drivers on a Server with multiple users.

We are trying to install ODBC drivers on our web server and want to know what is the minimum we can install and be able to add a DSN through the MS ODBC Administrator. This is a server that is used by multiple companies and we do not want to do something that will affect them.
The oracle installation does not warn you when it overwrites existing files, which is why we cannot simply install everything. For example, on my test machine it trashed the Java installation without asking or telling me. I discovered it this morning when I tried to go to a site that uses Java. That was a low risk on the SQL server, because we did not have Java installed. Other elements, though, cannot be risked in that fashion. We have to find out what files are required in order to solve the problem.
The oracle installation does not warn you when it overwrites existing files, which is why we cannot simply install everything. For example, on my test machine it trashed the Java installation without asking or telling me. I discovered it this morning when I tried to go to a site that uses Java. That was a low risk on the SQL server, because we did not have Java installed. Other elements, though, cannot be risked in that fashion. We have to find out what files are required in order to solve the problem.
Version 9i on a Windows 2003 Server.

1) I’m not certain about the overwrite vs separate machine. What happened is that it installed its own Java, which was much older than the Java previously installed. Following the oracle installation, internet explorer was no longer able to find Java at all, prompting for a new Java installation. During the installation, no mention was made of the changes that were being made.
2) Each company has its own account on our server, its own instance of the database, etc. nowhere in the oracle release notes or the installer could I find anything that provided for a user-limited installation: it was global. Even though the oracle installation suggested, and I accepted, unique folders for its installation targets, the problems mentioned occurred. The web server it wants to install is not possible to be user-limited: it wanted to take over http for the machine.

Installing ITS on a host with MULTIPLE IP'S

Similar Messages

Maybe you are looking for