Installing iTunes 9 and Op Sys 9

When I downloaded and installed iTunes 9 on my older MacBook running 10.4.9, the applications dock disappeared, can't see computers on my network, lost significant functionality/use of the MacBook
It seems the installation never completed - iTunes doesn't appear in Applications and it may be the installation is in underway.
Not a ton of help from Apple Store - they suggested to backup files and restore from original disc. That answer may be correct, but it seems very generic.
Any insight would be appreciated.

To start, iTunes 9 requires Mac OS X 10.4.11 or greater. http://www.apple.com/itunes/download/
You might upgrade your MacBook's OS first. http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html

Similar Messages

I recently installed itunes update and can no longer connect to network nor internet

I recently (sept 2013) installed itunes update and can no longer connect to a network nor internet wired /wireless. I know it is not the gateway as other devices work. Please help. I am not very knowledgable so exact instructions will be most helpful.

Try connecting your computer/laptop directly to the base station with an ethernet cable to one of the external ports and install your network settings. If it finds it there, it will find it after you've reloaded your network info to the base via the Apple Utility. Hopefully when you disconnect afterward, all will be fine. Be sure not to select "closed" network although Macs will login with no prolem, PC's have trouble doing so even with the network data stored in the internet settings.
Good luck!

I just installed itunes 12 and now when i plug my ipod into my computer it won't sync I have tried different ipods still nothing

i just installed itunes 12 and now when i plug my ipod into my computer it won't sync I have tried different ipods still nothing

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

I am running osx 10.5.8 and just wiped everything off this computer to free up space (including iTunes). I am trying to re-install itunes now and it won't because I need to be running osx 10.6.8. How do I update?

i am running osx 10.5.8 and just wiped everything off this computer to free up space (including iTunes). I am trying to re-install itunes now and it won't because I need to be running osx 10.6.8. How do I update?

You can download iTunes 10.3 here - this will run on Leopard.
http://support.apple.com/kb/DL1103

I installed itunes 11 and now it will not open any help would be GREATLY appreciated!!!

I installed itunes 11 and now it will not open any help would be GREATLY appreciated!!!

Hi
Can you use the mouse to access and start System Preferences?
When you rest the mouse over a dock icon, does its name pop up?
What happens if you open an application by ctrl-clicking on the icon then selecting Open?
Bob

I just installed itunes 10 and all it does when i open it is show me the software agreement, and if I click "accept" or "decline" it closes and does nothing else. It does the same thing when i try to play music on it. (By the way, I have Windows XP SP3.)

I just installed iTunes 10 and all it does when I open it up is show me the software license agreement, and if I click either "accept" or "decline" it closes up and does nothing else. It does the same thing when I try to play mp3 files, just opens up the license agreement and nothing else. It also doesn't recognise my iPod touch when I plug it in, thinks it's a digital camera. Please help! (By the way, I have Windows XP SP3.)

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

HT4623 iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

Error 3014
This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.

When ever i open itunes on my iphone5, only I can see is the suggestions to install iTunes U and podcasts...why itunes is not opening?

When ever i open itunes on my iphone5, only I can see is the suggestions to install iTunes U and podcasts...why itunes is not opening?

iTunes Store: Which types of items can I buy in my country?

Installed itunes 11 and now I get the following message 'The itunes library cannot be saved. An unknown error has occured (-50)

Installed itunes 11 and now I get the following message 'The itunes library cannot be saved. An unknown error has occured (-50). How do I fix this problem?

Same problem here since latest update. As usual poor support from Apple with no answer or fix for this bug.

ITouch no longer recognized after installing iTunes 8 and Leopard

I recently installed the new version of iTunes, which prompted me to download the new version of Quicktime, which then prompted me to install Leopard, which I did. Now I have the new version of iTunes, but my iTouch is no longer coming up as a recognized device. My connecting cable still works because my iTouch is charging when I connect it to my Powerbook, but the device is not recognized by my computer, and I've run out of options. I have tried restarting my iTouch, and also using a different connecting cable-- nothing works. Any advice?
Thanks a million.

Hello,
Just wanted to make sure you've also restarted the computer, in addition to restarting the iPod touch. For the time being, try to connect the iPod with the USB cable that came with it, and make sure it's being connected directly to the computer, and not through any external USB hubs or anything of the sort. Also, if you haven't tried this, try connecting the iPod to a different USB port.
Since installing Leopard, double check your Software Updates to make sure there's nothing else pending that you might need. (Just click on Software Update in your Apple menu).
If that hasn't worked it out, you might try reinstalling Apple Mobile Device Support, which is what allows the iPod touch to communicate with your computer and iTunes.
First, drag iTunes from your Applications folder to the Trash.
Then, delete these files:
(1) AppleMobileDeviceSupport.pkg located in: Macintosh HD/Library/Receipts/
(2) AppleMobileDevice.kext located in: Macintosh HD/System/Library/Extensions/
Restart your computer
Download and install iTunes again
http://www.apple.com/itunes/download/
CG

Please help? just installed iTunes 10 and now it won't open??

I just installed the new iTunes 10 and when I try to open iTunes, it says "iTunes cannot run because somw of it's required files are missing. Please reinstall iTunes. First off, how do i reinstall itunes? (step by step please)? and if i do reinstall it, will i lose all of my media in my library? If anyone could please help, it would be greatly appreciated! (:

I just installed the new iTunes 10 and when I try to open iTunes, it says "iTunes cannot run because somw of it's required files are missing. Please reinstall iTunes.
With that one, I think we should try getting the malware possibilities off the table first.
Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
http://www.malwarebytes.org/mbam.php
Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look.

Installed itunes 6 and now CD/DVD drive won't work at all

I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 5160
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2K (6.0.2.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD+-RW DW-D56A, Rev PDS7
Drive is empty.
E: ROXIO DVD-ROM EMULATOR, Rev
Drive is empty.
If anyone has a solution for this stupid problem that would be great.
Thanks

Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
http://support.microsoft.com/default.aspx?kbid=290301
Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

Just installed iTunes 6 and won't open at all...

ugggh! im so frustrated! ok i had the previous iTunes (5.0.1 or something like that) and it worked fantastic but now i downloaded iTunes 6 and it installed fine or whatever but now when I click the shortcut or the icon from the start menu nothing happens. I get no error message or anything. my quicktime works, ive restarted my computer, i realllllly don't want to have to uninstall and reinstall cuz then I'll lose all my music! Everything Apple has worked great until now

hi Erika!
Norton Internet Security 2005 is always the first thing i check up on with one of these ... been chasing these monsters down since itunes 4.9 (and they've been hitting us since 4.8).
It's still inconvienent that i have to turn that off every time I open iTunes.
hmmm. if you're still having to shut down your NIS 2005 prior to launching itunes even though you have NIS 2005 "permitting all" itunes entries, that's usually a sign that your Norton is also blocking some
b Quicktime
processes. to fix that try the technique given in Lorraine's post.
love, b

Error code 2738 when trying to install itunes 8 and quicktime

I've had itunes installed on my laptop for some time but received a new ipod nano for xmas. When I went on to my current version it said that the nano needed me to upgrade to itunes 8. I downloaded the software but towards the end of the installation procedure it says there has been an error 2738 and that quicktime hasn't installed properly.
can anyone help with this problem?
many thanks.

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80070BC9, or some other number? (If they're another number, what number are you getting?)

Trying to download and install Itunes 10 and I get a error saying invalid Drive H:\

Hello Im trying to download and install Itunes 10. I already have Itunes on my computer, and after i download and try to run i get an error message saying invalid drive H:\ I do not have a H drive , I am using a external 1TB drive to hold all my media but it is D: not H: what do i do??

See "Invalid Drive X:\" install errors.
tt2

Installing iTunes 9 and Op Sys 9

Similar Messages

Maybe you are looking for