Installing iTunes after registry user permission error

I'm just going to keep this simple. I ran CCleaner and cleaned the registry, then i ran Glary Utilities to clean up whatever CCleaner couldnt. THEN I downloaded iTunes from the apple website. I used winrar and extracted the install into a folder. I removed Bonjour64 from the folder and ran iTunes64. This bypassed Bonjour64 and installed iTunes flawlessly. When when I first opened iTunes it told me Bonjour64 needs to be running in my services...ingore it and continue. Bonjour64 is already running as it wont uninstall from windows when you have the innsufficient user permission error on the registry so its still installed. iTunes opened and I was able to use it as if the error never existed. Hope this helps! (ps after using other peoples tecniques i found that no-one elses worked without reinstalling windows...so I set out for my own solution.)
-Toast

Hi,
Try diactivating your antivirus software. This seems to work for alot of people. Tell me if this works for you as well.
xxmitchxx90

Similar Messages

  • Whenever i open itunes after installation it says error 7 itunes was not installed correctly

    whenever i open itunes after installation it says error 7 itunes was not installed correctly

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The section Install missing components may allow you to install Apple Application Support.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

    Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).  I have my iPod plugged into my computer via USB port.  What am I doing wrong?

    i have the only account on my laptop so have checked and am the account administrator
    i run windows 7 home premium
    I have the same problem and
    have followed the link uninstalling in the correct order,
    then restarted as per instructions,
    went to Apple to download itunes,
    hit download now,
    Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
    did not get a save instead of run prompt
    Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
    If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
    i can only click run as administrator from right clicking the shortcut on my desktop screen
    If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
    sick of doing this
    at least 7 or 8 times i have re installed itunes to no avail
    troubleshooting no better
    please help. pulling my hair out at this stage
    it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
    not working since i clicked yes
    also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
    really dont want to have to restore factory settings

  • After installing itunes it says it encountered errors as it couldnt be configured, any ideas??

    After installing itunes it says it encountered errors as it couldnt be configured, need help asap please

    I'd like to have a closer look at that error message please.
    Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
    Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

  • When installing itunes I received the following error "service Apple Mobile Device failed to start, verify you have sufficient privileges to start system services"

    when installing itunes I received the following error "service Apple Mobile Device failed to start, verify you have sufficient privileges to start system services"

    Me too. And if someone comes back on here with the same solution of "uninstall and re-install", please provide further advice after you have done that 3 times and the program still has the same problem in addition to the "failure to load the C runtime library" R6034 issue. I have removed itunes 3 times however I do not have permission to remove the program files/apple file and the uninstall doesn't remove it.
    You're not alone buddy.
    Frustrated.

  • Cant Install Itunes to Windows 7 (Multiple Errors) Please help

    so i keep trying to install itunes and i get these errors:

    Even though the micorsoft website does not list hte SUBINACL tool as being a valid tool for WIndows 7, here is a thread where a microsoft support person recommends it.
    http://social.answers.microsoft.com/Forums/en-US/w7programs/thread/324918a2-fb68 -49ba-833f-ecfb15a7ef10
    I would definitely follow the advice of backing up the registry and creating a restore point before proceeding with subinacl.
    After you have downloaded subinacl and installed using admin rights, do these steps to reset the registy permissions:
    ~Start Notepad.
    ~Copy and then paste the following text into Notepad.
    cd /d "%ProgramFiles%\Windows Resource Kits\Tools"
    subinacl /subkeyreg HKEYLOCALMACHINE /grant=administrators=f /grant=system=f
    subinacl /subkeyreg HKEYCURRENTUSER /grant=administrators=f /grant=system=f
    subinacl /subkeyreg HKEYCLASSESROOT /grant=administrators=f /grant=system=f
    subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f
    subinacl /subdirectories %windir%\. /grant=administrators=f /grant=system=f
    secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose
    ~Save this Notepad file as Reset.cmd.
    ~Double-click the Reset.cmd file to run the script.
    Note This script file may take a long time to run. You must run this script as an administrator.

  • When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

    When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • TS3074 im can u please help me out this issue im trying to install iTunes  in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

    im can u please help me out this issue im trying to install iTunes  in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

    Try the following user tip:
    " ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows

  • TS5376 I can not install itunes.  I get Runtime Error!  R6034.  An application has made an attempt to load the c runtime library incorrectly.  Please contact the application support team for more information.  I've been uninstalling, moving .dll files, re

    The other day I was prompted to update itunes.  I started to, and it crashed my itunes.  Then I tried to uninstall itunes, so that I could turn around and re-install it again.  Now I can not install itunes.  I get Runtime Error! message. R6034.  For the last two hours I have  tried deleting itunes, moving the .dll files to the desktop, restarting the computer (more times than I can count), deleting the temp files, updating my internet explorer, using the fix it program,..... 
    The two messages that I am getting are:
    Runtime Error! Program:c\Program Files (x86)\itunes\Tunes.exe     R6034   An application has made an attempt to load the c runtime library incorrectly.  Please contact the application's support team for more information.
    Also:  Service to 'Apple Mobile Device' (Apple Moblie Device) failed to start.  Verify that you have sufficient priviledges to start system services.

    I too was getting the same message regarding R6034. After many frustrating hours I went to the iTunes support page and clicked on "install and update." When that page came up I scrolled on to "removing and reinstalling iTunes......" There they tell you what files need to be removed and what order to do it in so you can reinstall iTunes. My iTunes works now and I didn't lose any music.
    About the Apple Mobile Device, well that's one of the files that has to be uninstalled. When you reinstall iTunes the Apple Mobile Device is automatically reinstalled.
    Hope this works for you as it did for me. Warning: it takes about an hour to do all this.

  • Unable to install itunes on XP. Get Error 7

    Unable to install itunes on XP. Get Error 7

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Hi i can not install itune. There are the error show " Could not open key: Unknown\Components\32A7D634EB632D11CABB00087CCFBB48\DAEC106DF4E2BBB458CC2CA9C46 E3A0C.

    Hi,
    i can not install itune. There are the error show
    " Could not open key: Unknown\Components\32A7D634EB632D11CABB00087CCFBB48\DAEC106DF4E2BBB458CC2CA9C46 E3A0C. Verify that you have sufficient access to that key. or contact your support personal.
    I have tried some soution from the similar case to uninstall itune and also related components already but finally the probelm still occured.
    Please you help to suggest me what can i do?  I need to restore my back up data to the new iphone as the previous one got stolen.
    BR,
    Sirorath A.

    Try the following user tip:
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

  • On every attempt to install Itunes I've recieved the error message, "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package Vendor." What do?

    On every attempt to install Itunes I've recieved the error message, "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package Vendor." What do?

    I know there's a million threads like this, but I thought I'd record my experience.  I, too, was having the original poster's error when I tried to update iTunes on Windows XP.  I think I was stuck on 10. 
    I solved it by un-installing iTunes and every other Apple app.  I discovered that Apple Software Update would not un-install as its MSI file could not be found.  I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs.  Google "kb290301" for a Microsoft page that includes a download link for it.  After that, I was able to install a fresh copy of iTunes 10.5.2.
    I'm not sure why this app's folder and MSI were missing from my computer.  I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit.

  • When I try to install iTunes I receive the following error message: "Apple Application support not found".

    When I try to install iTunes I receive the following error message: "Apple Application Support was not found". 

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
    tt2

  • Can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address

    can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address. i can cope with the first phone and getting it back on itunes but dont want to syn the 2nd phone until i know it is independant of the other one. Does it matter that both phones use the same itunes store account?

    Deleting the account on your phone only removes if from your phone.  The account and it's data remain intact and doing so will not effect your daughter's phone.
    To do this, first go to Settings>iCloud on your phone and turn any synced data (contacts, calendars, etc.) to Off, and when prompted, choose to keep the data on the phone.  When finished, scroll to the bottom and tap Delete Account.  Then set up a new iCloud account with a different Apple ID and turn any data you want to sync with iCloud (contact, calendars, etc.) back to On.  This will upload your data to your new iCloud account.

  • Can I install iTunes in separate user accounts on Windows Vista 64-bit?

    Hi,
    My wife and I use different user accounts on Windows Vista 64-bit. Before I go and mess things up on my computer, I wanted ask some questions:
    1) Has anyone has successfully installed iTunes to multiple user account?
    2) If so, has anyone successfully shared the same music root directory for 2 different iTune instances.
    I'm thinking with iTunes very tight integration with the music files (for indexing/searching, etc), that it would be bad to have add/change/delete on the same music root from 2 independent installations.
    Experience OR opinions welcome!

    ) Has anyone has successfully installed iTunes to multiple user account?
    You don't install the iTunes application more than once. Each user account in Windows will have its own iTunes library.
    If so, has anyone successfully shared the same music root directory for 2 different iTune instances.
    Many people have done so. This should help:
    iTunes: How to share music between different accounts on a single computer
    Note that iTunes has no folder-watching capability, so if you add a track in one user account, the other user will have to add that new item manually, either by using the Add To Library command or dragging the item into the iTunes window. There are a couple of potential solutions from other developers, though:
    http://albumbrowser.klarita.net/iTunesFolderWatch.html
    http://www.lifehacker.com/software/itunes/hack-attack-automatically-sync-itunes- to-any-folders-175161.php
    Thanks to Meg and Hudgie for the tips.

Maybe you are looking for