Installing itunes on WIN7 64bit

i tried installing itunes 64 on windows 7 64 bit - but the installation won't start, it does nothing, what do i need to do ?

Usually antivirus is the cause. Try to start AMDS manually see what it does, if effect is the same, I would switch antivirus.
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Here is the source for instructions:
How to restart the Apple Mobile Device Service (AMDS) on Windows

Similar Messages

Several error installing itunes in win7 64bits

Hi! This is the error that occurred on my computer to install itunes 10. I recently purchased iPhone 4 but I can't install Itunes10. Earlier this computer boast an older version of itunes but recently, I've formated it and I cannot install itunes now. Operating system Windows7 64bt, antivirus microsoft security essentials. Some suggestions? Thanks in advance
"An error occurred during installation of assembly `Microsoft.vc80.CRT, version="8.0.50727.4053", type="win32", publickeytoken= "1fc8b3b9a1e18e3b",process or architecture="86". Please referto help and support for more information. Hresult:0x80070002"
Message was edited by: Galopin

Hresult:0x80070002
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up +en passant.+
Go into your Windows update and try to check for new updates. Do they fail to install? If so, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you?
If the Windows Update errors are also 80070002s, then try the following Microsoft document:
[Windows Update error 80070002|http://windows.microsoft.com/en-US/windows7/Windows-Update-error-80070 002]
If that gets your Windows Updates installing again, stock up on any you're behind on. Then try another iTunes install Does it go through properly this time?

Can't re-install iTunes on Windows7 64bit PC.

Can't re-install iTunes on Windows7 64bit PC. Tried uninstalling Apple programs in correct order and starting again with new download but I can't install Apple App support which means iTunes won't work. May be something to do with microsoft visual c++ redistributable package x86 which I cannot repair.
Help please!
Thanks
Mike

A hint from another thread suggests that temporarily disabling the Windows Firewall may help with the installation of the C++ Redistributable components.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Can't install itunes on my 64bit windows 7 laptop

Can't install itunes on my 64bit windows 7 laptop. Says there was a problem with the windows installer package and a program required for this install to complete could not be run..
I have uninstalled and re-installed several times now already using the add/ remove programs under control panel..

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

My iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

my iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

It won't pass 10.3.
What does this mean?
I figured it out. Thanks!!!
What did you figure out? How about posting how you resolved it?

High process while running itunes on win7 64bit

since i update my ituns i have problem with it i have
high process while running itunes on win7 64bit in my laptop and also i have backup problems what should i do i see a lots of user on win have same problems as me
i have removed it and reinstall it for 20 times but it dose not work

Windows 7 Home Premium user here, 32-bit as well. It really doesn't appear to matter what is open for me; as long as I've focused on some other window other than iTunes, it will inextricably start skipping almost exactly like a badly scratched CD. This is absolutely unacceptable, because this simply never happened before with any previous version of iTunes. It's simply gotten to the point where there are too many users experiencing the same issue. There are already many forum posts about this problem all over the net too, and Apple techs really haven't even responded about this at all? or are they assuming everyone's going to be more focused on listening to music on their brand new iDevices instead?
Really, everything is about quality control, right down to the software, and that absolutely should have included iTunes 10.7, but obviously that wasn't the case for my fellow windows users.

Can`t to install ITunes in Win7 64x (((

Can`t to install Itunes in Win7 64x.
Once installed this programm, but later removed.
Now during installation is error:
What should I do with it?
How to install correct?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Problem installing itunes on windows 64bit

problem installing itunes on windows 64bit, help me!!!

Yes, when I try to install the iTunes software on my notebook, running Windows 7 64-bit, I get a window that says: "There were errors before iTunes could be configured. Error during installation. Computer was not changed. "thanks

AMDS not installing when installing iTunes 10.5 64bit from scratch

Sorry for creating yet another thread on the 10.5 update, but I'm running out of options (and patience ) here.
I was happily running iTunes 10.4 64bit on Windows 7 ultimate when I saw that I had to update to 10.5 in order to install iOS5 on my iPhone 4.
I tried automatic and manual update, didn't work. So I went through the hoops, uninstalled everything Apple related in the correct order, and finally managed to install iTunes 10.5 64bit. Installation went seemingly smoothly, except that at some point the installer window said "rolling back", then went on with its business.
I started iTunes, and connected my iPhone. A message appeared saying something among the lines of "this device cannot be used because the required software is not installed" (I'm translating here, sorry). I then realized that Apple Mobile Device Support hadn't been installed. I tried installing it manually (extracting the installer from the itunes64setup), no dice. I tried uninstalling and reinstalling iTunes a dozen times, using iobit uninstaller or not, still no dice.
Is there something I didn't think of? Any bit of help would be much appreciated. Thanks for your time.

I've done it a couple times, Windows 7 Pro and even Windows 7 Preview, and it does install just fine.
Of course it could be your security suite - mine is MS Security Essentials on two PCs but also Kaspersky PURE on 3rd
AMS is or can get screwed or damaged which was why I went with a clean install in one case.
Once it showed yellow alert in Device Manger for iPod USB deivce, and in Devices & Printers (control panel). Might be when I told Windows "always do xyz when it detects iPod" (which I now don't select any default action for.
To be sure the iPod will be detected, some people do it slightly different but basically:
before launch iTunes or connecting iPod -
Services: Restart AMS, Bonjour and iPod
Launch iTunes
Connect iPod
But once Device Manger complains, I could never get it 'fixed.'
Try a clean install on another partition of Windows for test.
Then if that works you can decide what to do. Backup, move, resize.
It took me 20 minutes to install Windows but a day to add, update and install everything else, and make some backup images ($20 Paragon Clone OS utility, which ARE bootable and take 10 minutes to copy 50GB )

When installing iTunes 10.5 64bit on my win7 64bit computer I get a weird error message.

This all started when one day I plugged in my iPhone 4 to my iTunes 10.4 on my PC (win7 64bit) and I got nothing. I got the connection noise and my phone started charging but it would not show up in iTunes. In My Computer, it sees that I have an iPhone plugged in but shows it as a Camera, not a phone, and I am not able to see anything inside said "camera". At this point I decided to clear everything "Apple" off of my computer and manually install iTunes 10.5. Mid download i came across this error message that I have no clue what it is telling me. After clicking "OK" it then tells me "rolling back session" and then tells me that "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services." Since getting this messag I suspected that it was an AMD (apple mobile device) issue. AMD seems to be IMPOSSIBLE to uninstall/delete from my computer... At this point I'm giving up and looking for advice/help on this issue.
Im lead to believe that it is an AMD issue because iTunes 10.4 reads my iPod Shuffle perfectly but wont read my iPhone 4 or a friends iPhone 3g.
Thanks in advance for taking the time to read this!! Any help would be greatly appreciated because I dont want to reformat

Hey donovanjj,
Thanks for the question. Let’s try to recreate your SC Info folder:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
If the above does not resolve your issue, you may want to look over the following resources:
iTunes 11 for Windows: If you have trouble burning a disc
http://support.apple.com/kb/PH12349
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thanks,
Matt M.

I get r6034 when I try to install/repair/deinstall iTunes on Win7 64bit.

Win 7 - 64bit - I get
"Runtime Error
Program C:\...\iTunes.exe
R6034
An application has made an attempt load the C runtime library incorrectly.
Please contact the applications support team for more information."
I receive this error message multiple times when trying to de-install/repair/install iTunes.
I did have "read only" attribute set on iTunes files. I removed that attribute.
Problem started (as far as I know!) when attempting to upgrade version. Since I can no longer start
iTunes (see error above), I am not sure what version I have, but have used program occasionally prior to problem.

Hi,
I also get the following message:
"Could not read ProductKey entry from the cache file"
I have no idea how to provide the installation software with the key. I also tried "keycheck.exe"
Do you have a solution for this problem? Did you finish the installation?
Christian

Ipod Classic (160GB) not recognized by iTunes on Win7 64bit

when I connect the iPod classic to my PC (64 bit Win7), I receive a driver software installation error message. Apple Mobile Device USB Driver indicates FAILED. Device Manager shows the "Apple MObile Device USB Driver" within the USB controller section with a "yield" symbol,which of course indicates a driver problem. I have followed the online troubleshooting steps, including trying other USB ports and even re-installing iTunes. The same error message however appears. It was not that long ago that all was working just fine on this system. What next ?

Hey I'm not any way a representative of Apple or Microsoft but I'll see if I can help (and any advice I give may or may not work):
I think the problem with USB drivers is that they partially install then get messed up. Occasionally that leaves your USB drivers messed up but Windows thinking it's ok.
The way I'd go about this kind of problem is to uninstall the USB drivers as though they never existed using third party software such as USBDeview.
You can download the 64 bit version here: http://www.nirsoft.net/utils/usbdeview-x64.zip
More info (if you want to find out how it works): http://www.nirsoft.net/utils/usb_devices_view.html
Using USBDeview, you may want to uninstall any drivers that are causing the issue. Make sure you uninstall the correct drivers that you recognise (from the description).

Can't install itunes on win7 x86_64

my PC cfg:
i got itunes install package named iTunes64Setup,clicked it on my win7(ultimate)OS x86_64,try to install it on my disk F and after a while i got a prompt as following described:
so i clicked the butten,and the install dialog rolled back and stuck there,i can't help to use Task Manager to drop it.
I installed again under x86 filepackage on disk C and quickly it show me a new prompt that means to tell me installing failed and my sys param not changed.
So,i typed the above words and tryed a third time,and that erro prompt occurred:
Then,i clicked again and that showed me,i choose the button "重试",
for a minute that showed me ,clicked it,
At the last,,so i finished it.
What happend?How can i install itunes correctly?With your helping,i'll be appreciate.
Message was edited by: clark_panda

Hello Gesturinn,
Thanks for the question, and welcome to Apple Support Communities.
The following article outlines troubleshooting issues when attempting to install iTunes. In your circumstance, it may be as simple as choosing "Save As..." (and ultimately choose a location) instead of "Run".
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

Encore CS3 library install fails on win7 64bit pro

Hi
Just installing my discs from Premiere Pro CS3 onto a win 7 64 bit pro PC, which was my Win X 32bit PC but with all new components except Power supply unit and my Audigy X-Fi elite pro sound card.
Exit Kaspersky IS 2014.
Premiere CS3 failed to go on though other third part components did.
I then disabled Kaspersky IS 2014 AND made the User Account Control 'off', and bingo, it worked.
So now reboot and turn off KIS and check UAC is off, and proceed, install Encore CS3. it went on
However Encore CS3 library has a red X.
try again select install library, long wait for the green progress bar to finish, result still not on.
Why and what else can I do ?
Has anyone else had a battle installing CS3 onto win7 pro 64bit or just win7 64 bit ?
Merlin

CS3 is 32 bit. But it sounds like you got that part to work. Does Encore run? I don't think that is the issue; I suspect permissions.
If you are just wanting menus, etc, just use the CS6 download. Don't use one of the links with an installer; just download and unzip to the correct location. The menus were not updated from the pre-CS4 pars (Encore knows to do this), so I suspect you will be fine. I have not actually used the recent library with CS3.
Encore Help | Download full library content/functional content

Having problem installing iTunes on Win7 x64

I tried installing iTunes 10.6.1 for Windows 7 (64-bit) from apple website but few seconds after the installation begins, an error comes up that says: "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." When I press OK it stops the installation. Is there anyway to fix this problem?
Also here is a picture of the error:
Thanks

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL >
Add n Remove Programs(XP)
Programs n Features(Win7/Vista)
highlight ASU and click CHANGE then REPAIR

Installing itunes on WIN7 64bit

Similar Messages

Maybe you are looking for