Installing itunes9 after itunes10 has been released

I have a machine that can not run 10.5 so I can not have itunes 10. where can i find the itunes9 install package?

I found it, i cant do iTunes 9 either. the machine for this project is my pismo, so I am in need of iTunes8. I found it, its on apples support download page
http://support.apple.com/kb/dl857
just in case anyone is looking for it.
thanks for the help Kevin
your welcome, Kevin

Similar Messages

Installing FP after it has been unzipped

I am trying to use an older flash player from the archives. After I have unnzipped the file, how do you get the player to download and work? I am new to all this so step by step instructions would be greatly appreciated. Thank you!

What is your operating system?

Cannot install trial for Adobe Acrobat XI Pro on my computer - After I select download, I receive this message: This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.

Cannot install trial for Adobe Acrobat XI Pro on my computer - After I select download, I receive this message: This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance. Have tried doing so from multiple browsers.
Please let me know how to download the trial version.
Thank you.

Try downloading Acrobat Pro XI using below link. Then try to installing it once again.
Download Acrobat products | Standard, Pro | XI, X

F110 - Payment Run has been released error

Hi,
When we are executing payment run F110, after parameter entered & payment proposal is created it gives an message payment run has been released without
payment proposal edited & payment run carried out.
pl. help me in this regard.
thank u
regards
santosh

hi Chenu,
thanks for reponse immediately, can u kindly tell in detail why it will go to released state and how to overcome this problem, it happen occassionally not regularly.
thank u
regards
santosh

After Firefox has been running a while, every link opens a new window

After Firefox has been running for a while, every link starts opening in a new window. Until today, if I closed Firefox and restarted it, it would stop happening ... until it started happening again. Then today, I closed it down and restarted it, and it was STILL happening. So either I find a solution, or I stop using Firefox on my Mac.
This is a vanilla installation - both for the Mac and Firefox. I don't use the Mac as my main computer. The Mac is running OS X 10.5 8. The problem has existed through many upgrades of Firefox. I always upgrade as requested. This last time, however may have been the killer. A new upgrade was installed right before the problem became unfixable by shutting down and restarting. I'm running Firefox 15.0. I just rebooted, however, and now (for now), it's working properly.
I have no add-ons installed in Firefox.
My only plug-ins are iPhotoPhotocast, QuickTime, SharePoint, and Shockwave Flash.
I've seen multiple reports of this problem on this Web site, but no solutions. Just a generic recommendation to disable add-ons to see which one is conflicting. But I'm running no add-ons. I think there's a bug in Firefox.

If it were an extension or theme or a Mac driver, wouldn't it cause the problem consistently? This only happens after Firefox has been running for a while. I'm using Firefox to type this reply right now, and the problem is not happening.
And it's not because I suddenly start using some offending software. As I said, I don't use the Mac as my main computer. Usually I'll have been using my PC, I'll go back to the Mac to check my email on Firefox, and suddenly the link problem is happening. I only use the Mac to check email on the server before I download it with Outlook (on the PC) so I can delete spam on the server first.

Running F110 with message "Proposal has been released 07/22/10 06:42:33"

Dear experts,
When I made proposal through F110, it shows me "Parameters have been entered", then after setting the related parameters, I tried to run Proposal with check on "Start immediately", then the message "Proposal has been released 07/22/10 06:42:33" appears, I also check SM37, but I can not get the spool list.
What could be the reason?
Thank you!

In the first tab of your F110 screen, you'll get the status of your processing. It will update for each event. Check if you are getting things like the following.
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
Payment run has been carried out
Posting orders: 1 generated, 1 completed
If you are not getting any of the above, you can check that step and analyse the log.
Since you are getting as released, i think the proposal run has not carried out.
Ravi.

Itunes is saying that 11.0.5 is the most current version on my mac book pro even though 11.1 has been released. what gives?

itunes is saying that 11.0.5 is the most current version on my mac book pro even though 11.1 has been released. what gives?

Hey Blake Placid,
Thanks for the question. If you have not already done so, I would download and install iTunes directly from the following link:
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Thanks,
Matt M.

How to add DNS server to CER after Server has been Built

How to add DNS server to CER after Server has been Built?
The reason why, the CER 1.3.1 that I upgrade to 7.1, had the switch list by hostname,
The install of 1.3.1 had the LMHOST file editted with all the switch names.
Is there such thing as a host file on 7.1 CER? If not, that is where I need to add the DNS server now. As they will have to add the switch hostnames to the DNS server.
Thanks
Kallol

I found where to set the DNS via CLI...
admin:set network dns
      set network dns options
      set network dns primary
      set network dns secondary
Also it requires me to configure the domain name.
set network domain name

Install error: "This application cannot be installed because this installer has been mis-configured.

I need help with an error I am receiving. I'm on a Mac with OS X Mavericks. I just attempted to install the Photoshop Elements trial and, in attempting to open the "Install Adobe Download Assistant", I received this error:
"Sorry, an error has occurred.
This application cannot be installed because this installer has been mis-
configured. Please contact the application author for assistance."
I did attempt to download a new copy of the installer, with the same result.

you can download directly:
if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

Chinese Word list update 1.6 has been released by Apple but no update to my Mac. Help Please

Apple has released Chinese Word list update 1.6 on May 6, 2013. It is a 105 kb update file. I have Chinese word list updte from 1.0, 1.1, 1.2, 1.3, 1.4, and 1.5 installed on my Mac. So I think I need it.
But many days passed, no Chinese Word list Update 1.6 is being installed automatically on my Mac 15 inches with retina display.
Where on earth can I get this chinesewordlistupdate.pkg file to manually update my Mac to 1,6?
And I really don't understand why Apple release this update in this kind of ashin many times and it is very anoying. I have contacted Apple support many times, but there is no clear response and they said there is no such kind of update.
Here is the link t prove that the update exist and has been released
http://www.gfi.com/lannetscan/macfullreport.htm
Help clarify and if possible, please point me to download this version 1.6 pkg file please
Hellp is highy appeciated

Purd wrote:
So I think I need it.
I think you are mistaken about needing it. Since you do not write in Chinese, it will not be of any more use to you than were the earlier Chinese word list updates you have posted about here in the past. Nor can I imagine that anyone in these forums will be able to help you get it, any more than they could the last time.
https://discussions.apple.com/thread/4922426
But I wish you good luck!
Apple now has a special discussion forum for Chinese. You might want to ask there:
https://discussionschinese.apple.com

How to forbid any further changes for PO (QTY and price ) after it has been

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh

PR has been released, but i found the plant input is error.

PR has been released, but i found the plant input is error. i want to correct the plant, and i wish the release info is saved, i.e. the manager needn't release the pr again. is it posssible?

Hi,
You can modify the PR but will the changes trigger the Release strategy depends on the configuration which is done in your system.
If the Release Indicator is assigned for triggering the RS if there are any changes in PR the RS will get triggered and if it is not assigned it will not trigger.
Please check the Release indicator configuration on weather the Indcator are set for changes.
Thanks,
Vijay

Set Cursor.vi fails after it has been called for 30 different panel refs in LV 7.1.1

Make sure both attached files (Run LabVIEW_Cursor_TestCase.vi, SimpleVI.vi) are in the same folder. Run LabVIEW_Cursor_TestCase.vi notice that the -3 error code is returned from "Set Cursor.vi" after it has been called with 30 different panel refs. If "Set Cursor.vi" is replaced with "Set Busy.vi" the same error occurs.Is there a workaround for this problem other that setting the cursor image manually in user32.dll? I must be able to open more than 30 panels and set them all to busy. In the test case I used a single VI, simply to demonstrate the error.
Message Edited by Jerred on 05-04-2007 10:06 AM
Attachments:
LabVIEW_Cursor_TestCase.vi ‏68 KB
SimpleVI.vi ‏13 KB

This bug is fixed in LabVIEW 8.0 and later. Unfortunately, I know of no workaround in LabVIEW 7.x. When I encountered this bug in one of my UIs in LabVIEW 7.x, my "fix" was simply to ignore the error outputs from the cursor VIs, and to live with the fact that I had no custom cursors after 30 windows had been opened.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

ACR 8.7 has been released with support for the Nkon D750. Why no Lightroom support yet?

ACR 8.7 has been released with support for the Nkon D750. Why no Lightroom support yet? Am I wrong or was support for the D810 available far more quickly?

ACR 8.7 has not yet been released. The ACR 8.7RC has been released. It is a Release Candidate - and as such, is not a final version. I wouldn't be concerned about a lack of Lightroom support until a final version is released.
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs

How do i get back my stateful session bean after it has been passivated

hi ,
How do i get back my stateful session bean after it has been passivated by container.
i'm confused that is it possible or not .......give me answer
i've one stateful sessionbean which i'm accessing throgh my normal java client . now what i'm doing is when i first time call a method it is running ......then i'm shutting down the server jboss .......it is calling my ejbPassivate() method ... at this particular time client program doesn't do anything.....
now after i restart my server i'm again calling back that business method with that last object reference.......it gives me the exception given below.....
java.rmi.NoSuchObjectException: no such object in table
java.rmi.NoSuchObjectException: no such object in table
     at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
     at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
     at sun.rmi.server.UnicastRef.invoke(Unknown Source)
     at org.jboss.invocation.jrmp.server.JRMPInvoker_Stub.invoke(Unknown Source)
     at org.jboss.invocation.jrmp.interfaces.JRMPInvokerProxy.invoke(JRMPInvokerProxy.java:118)
     at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerInterceptor.java:227)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:167)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:46)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:55)
     at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSessionInterceptor.java:106)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:86)
     at $Proxy1.makeNewAcc(Unknown Source)
     at client.GanJavaClient.main(GanJavaClient.java:46)so pls tell me that is it possible to get back that session besn or not

Stateful session beans are not persisted across restart of the EJB server instance(s) hosting them. You can't treat a Session bean as one would an entity bean.
Chuck

Installing itunes9 after itunes10 has been released

Similar Messages

Maybe you are looking for