Installing JDK 1.2.2 in Windows XP - Professional

I was getting the following error while installing JDK 1.2.2 in Win XP :-
javaw.exe has encountered a problem and needs to close.
AppName : javaw.exe AppVer : 0.0.0.0
ModName : symcjit.dll ModVer : 3.10.0.107
Offset : 0005f974
The error report includes information regarding the condition of javaw.exe when the problem occured; the operating system version and computer hardware in use; your Digital product ID, which could be used to identify your license; and IP address of your computer.

I recently installed the J2SE SDK onto my computer
(Windows XP). How do I access MS-DOS to check my
path?
Thanks
WTBInstall DOS on another machine and create a boot disk. Then put that bootdisk into your XP machine and boot from that.
There is no DOS in Windows and hasn't been for years.

Similar Messages

How can i install itunes 11.0.1 on windows xp professional x64 edition

how can i install itunes 11.0.1 on windows xp professional x64 edition

I have eventually managed to resolve my issue by:
1) Installing "Segoe UI" fonts in the C:\Windows\Fonts folder.
2) Changing my default colour profile to "sRGB Color Space Profile".
Navigate to My Computer > Control Panel > Display > Settings > Advanced > Color Management.
Click Add button and select sRGB Color Space Profile.icm from the Add Profile Association pop-up window.
Select sRGB Color Space Profile.
Click on the Set as Default button.
Click on Apply, OK, OK.

Cannot install JDK 1.4.2 on Windows 2008 Server

Hello,
I am trying to install JDK 1.4.2, but I get this error message:
"Internal Error 2902. ixoFileCopy"
I tried serveral versions (JDK 1.4.2_15, 1.4.2_19, 1.4.2_18, ...) but I get always the same error.
It is a fresh Windows Server 2008 installation (not 2008 R2), and I need JDK 1.4.2 for NW 7.01 installation.
Any help is welcome!
Best Regards,
Holger

Hello,
I found the solution, see [SAP Note 1230512 - Ende des Produktlebenszyklus von Sun J2SE 1.4.2|https://service.sap.com/sap/support/notes/0001230512]
I did not download the Java for Business Version. With this verions and Patch 27 it works....
Best Regards,
Holger Slomka

Cannot Install 11g 64 bit client on Windows 7 Professional 64 bit OS

I am trying to install Oracle 11g 64 bit client on Windows 7 64 Bit Professional. I'm running setup as administrator and all prerequisites fail with Actual Value not Found Expected value not found. I select ignore and press next and the application just silently shuts down. Log is too big so here is an abbreviated log.
Here is the installation log
Thanks in advance!
Using paramFile: C:\temp\win64_11gR2_client\client\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\temp\win64_11gR2_client\client\install\../stage/produc
ts.xml
INSTALL_TYPE InstantClient
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME xxx-xxxxxxx-xxx.xxx.xxxxxxx.xxx
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_OraMTSPortNumber 2030
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <init>
INFO: Completed validating view at state <init>
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@94b318
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Administrator
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@74d175ff
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@3850620f
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\temp\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\temp\win64_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/temp/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/temp/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: PATH has :==>C:\Users\xxxxxxxx\AppData\Local\Temp\OraInstall2012-04-17_11-11-24AM\jdk\jre\bin;.;C:\windows\system32;C:\windows;C:\app\xxxxxxxx\Oracle\product\11.2.0\client_win32\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\12.0\DLLShared\;C:\Program Files (x86)\Roxio\OEM\AudioCore\;C:\Program Files\TortoiseSVN\bin;C:\Program Files (x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;c:\Program Files\Microsoft SQL Server\90\DTS\Binn\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is oracle.install.commons.base.interview.common.view.PrereqGUI@64d90254
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\temp\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: xxx-xxxxxxx-xxx:C:\Users\xxxxxxxx\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Preparation of nodes for running verifications failed. Reason:
- Cause Of Problem Not Available
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Free Space: xxx-xxxxxxx-xxx:C:\Users\xxxxxxxx\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Error Message:PRVF-4001 : Check: Space available on "C:\Users\xxxxxxxx\AppData\Local\Temp"
INFO: Cause: Could not determine mount point for location specified.
INFO: Action: Ensure location specified is available.
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]

I disagree with your assessment, for two reasons.
One is the severity for RAM is listed as Severity:IGNORABLE.
Secondly I just saw this happen to myself just a moment ago (which is how I found this threat) as well using a silent install on a Windows 2008r2 server I can install to using the setup.exe manually. so disk and memory really isn't an issue.
I suspect something else is going on here. If you read those warnings the Critical they are just the last two about disk space and the PATH variable. Perhaps I am not running as elevated as I thought or the C$ share is not reach able. I am going to keep trying and will report back here when I get my silent install working.
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Error Message:PRVF-4001 : Check: Space available on "C:\Users\xxxxxxxx\AppData\Local\Temp"
INFO: Cause: Could not determine mount point for location specified.
INFO: Action: Ensure location specified is available.
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO:
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO:

HP Photosmart D7560 Driver Install CD Is Not Compatible with Windows 7 Professional?

I put the install CD in my disc drive to re-install my D7560 printer and got an error message that said the D7560 was only compaible with Vista 64-bit, Vista and XP, that my OS was 601.64. I then noticed it also said this on the CD. How do I work around this problem to re-install my D7560?
OS - Windows 7 Professional 64 bit, SP1
Browser - IE 11
PC - HP Z220 CMT workstation
12 Gb RAM
Intel i3 3220

Hi,
It seems as an hardware problem rather than a software issue, we will have to deal with this one first.
Follow these steps to troubleshoot power issues with the printer:
http://support.hp.com/us-en/product/HP-Photosmart-D7500-Printer-series/3396082/model/3396084/documen...
Please let me know of any changes.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Runtime error installing driver for photosmart C6380 on Windows 7 Professional 64-bit machine

I have an HP Photosmart C6380 All-in-one printer networked to home network and connected to a laptop (hardwire) with Windows 7 Professional 64-bit operating system.
Downloaded driver from HP site and receive message:
Runtime Error
Program:c:\USERS\.....\AppData\Local\Temp\7xS374E\SETUP.exe
Any suggestions?
I can print, but cannot use other all-in-one functions

Hi HW65,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are getting errors when attempting to install the HP Software and Drivers for your printer.
Please remove any cables that you have connected to the printer with the exception of the power cable. Please make sure you have the power cable connected direct to a wall outlet and NOT a power bar/strip. Here is a document that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. Note that the printer in the document is a LaserJet printer and this is only used as an example and that the document is meant for HP products in general.
Please remove the Printer from the computer with the use of the uninstall utility that can be located in the All Programs menu in the HP folder under the model of your printer.
Please click on the following link to download and install the printers HP Photosmart C6300/6324 All-in-One Printer series Full Feature Software and Driver. Please save the file to your desktop so that it creates it's own Icon.
Once the download is complete, double click the Icon and follow the instructions. Please do NOT connect any cables to the printer until the installation prompts you to do so.
If you have any other questions or any concerns, please feel free to write me back.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Downloading and installing Oracle (with sql plus) on Windows 7 Professional

Hi,
I got a new laptop which has Windows 7 Professional (64 bit). I intend to download Oracle 10g and would like to install bothe the database and the sql plus in this system.
I would appreciate if somebody could provide me a link to the appropriate database (with sql plus installation capability). Also if available the installation guide.
Thanks in advance.

Hello,
Windows 7 Professional (64 bit). I intend to download Oracle 10g and would like to install bothe the database and the sql plusOracle *10g* is not certified on Windows *7*, except with the latest patchset *10.2.0.5*, and its Premium Support ended on the *31st of July 2010*.
You should download Oracle *11.2* which is certified on Windows *7 - 64 bit*.
You'll find the Documentation and Download tabs on the link below:
http://www.oracle.com/technetwork/database/enterprise-edition/overview/index.html
About SQLPlus, it's delivered with Oracle Server and, in *11g*, you can still use it from a DOS box. If you intend to have a Graphical Tool, you should use Oracle SQL Developer instead:
http://www.oracle.com/technetwork/developer-tools/sql-developer/overview/index.html
Hope this help.
Best regards,
Jean-Valentin

Error 1303 Installing Adobe 9.4 Reader on Windows XP professional

Read the recent threads and tried running directly from the .exe file and still get the error message 1303 " the installer has insufficient privilages to access directory C:\program files\Adobe\Reader\9.0\Resource\CMap ALso check the permissions and administration controls. CMap does not have security setting associated with this file. Any solutions Adobe forum - thanks
OS Windows XP Professional

I had the same problem listed. The update uninstalled my old version and then bombed at installing the new versio with Error 1303. Despite being an administrator, I did not have rights to change or delete the reader folder. So I booted into safe mode then that gve me the ability to blow away the Reader folder. I ran the installer again from Adobe.com and it went through fine. Hope this works for you.
John

Installing oracle 9i administrator version on windows XP Professional ,

Pls provide step by step detail on how to install oracle 9i adminstrator , as i am new to oracle 9i developer track.
i already inistalled , but it is askinme for port no? etc...
pls help ..

If you want to install Oracle 9i R2 (9.2.0.1.0) on Windows XP, read the release notes here:
http://download.oracle.com/docs/html/A95495_01/toc.htm
& Installation instructions here:
http://download.oracle.com/docs/html/A95493_01/toc.htm
Rgds.

Can't install Oracle 8i Enterprise Edition on Windows 2000 Professional SP3

Please help me to find out a reason.

Read the "System Requirements and Supported Platforms" document:
http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_1.htm

Installing jdk 1.4.2 and 1.5 parallel

Hello,
I would like to know it is possible to install jdk 1.5 on a windows XP machine already countaining jdk 1.4.2.
I need both versions. I want to switch between them with Eclipse build in features or by selecting the whole path to the bin folder of the target version in batch scripts.
Is this possible or does dll or registry stuff collide?
Tanks in advance.
Alex

When you install a JDK in Windows, you are given the choice to not install a JRE (it's installed by default).
The JRE uses the Registry and also installs copies of java.exe, javaw.exe, and javaws.exe in /Windows/System32 directory. The JDK doesn't alter or install anything outside of the directory it installs into.
You can have as many JDK installs (directories) of different versions as you want, and access the programs in each with a full path to the program. You can provide the path information either from the commandline or a .bat file.
If any of the installs also install a JRE, then the Registry entries and java files in the System32 directory will be for the last version installed. There can only be one active JRE installed.
Whatever version's files are found first on the PATH environment variable's list will be the version executed when a naked java command (without the path) is issued. This also means that you will [usually] execute the version whose files are in the System32 directory, since that directory is [usually] the first directory listed in the PATh list.

Cannot find native2ascii.exe (JDK 1.5.0_05 on Windows)

Hi,
I am sorry if this is not the right forum for this issue, but I have a small problem:
I recently installed JDK 1.5 on my Windows XP box, and I need to use the native2ascii tool. For JDK 1.3 and 1.4, I have found this tool in the bin/ folder of the jdk installation. However, I cannot find the native2ascii tool in my JDK 1.5 installation, even though it is described in the documentation...
Any ideas?
Should I try re-installing the 1.5 JDK?

Never mind, I reinstalled as soon as I got the chance, and there it is, in the bin directory...

Install Problem with Adobe Presenter 9 Trial on Windows 7 Professional 32 bit?

I am trying to install Adobe Presenter 9 Trial on Windows 7 Professional 32 bit. It hangs up while installing Microsoft Visual C++ 2005 Redistributable Package (x86). How can I get around this?

Just a hunch. You can try installing Microsoft Visual C++ 2005 Redistributable Package (x86) yourself from http://www.microsoft.com/en-us/download/details.aspx?id=3387 and then try installing Presenter again. This may resolve the issue.

Flash 10. will not install on my Windows 7 Professional machine (64 bit)

II cannot install Flash 10.* on my Windows 7 Professional machine (64 bit). I have uninstalled whatever remnants of an earlier version might have been on the machine. I have tried using various browsers for the installation (Explorer, Firefox, Chrome). I have tried using “Square” as part of the installation. And I have tried “Manual”.
Any suggestions?

What do you mean by "cannot install"? Does the installer give you any indication that says your computer is not supported?

Could not connect to internet after installing PO 8.1.6 on Windows 2000

Hi folks !!
I wish some one could help with this !
After installing PO 8.1.6 on Windows 2000 professional , my computer become unable to connect to the internet. I have a DSL connection. I know that my connection is Ok because I have linux on my computer too and connection to the internet works just fine.

Bugger.
Thank you very much for the info!
Oracle 1.0.4 installed ok and does work - one or two crashes here or there but it does the job.
Rob

Installing JDK 1.2.2 in Windows XP - Professional

Similar Messages

Maybe you are looking for