Installing laserjet cp 1525nw software "connect usb cable now" but nothing happens

My laserjet CP1525nw is connected by USB to my desktop PC and now I am trying to connect it to my laptop.  I get to the point in the install process where it wants me to "connect the product" but when I connect the USB cord to the laptop nothing happens.  My USB ports work fine for everything else and I have tried all three.

Hey there rcbrehm,
Sorry to hear you are having this problem. Here is a link to some troubleshooting that should help resolve your issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02124639&tmp_task=solveCategory&cc=us&dlc=en&la​...
Make sure to let me know if you need further assistance after following the steps in the link above.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Similar Messages

  • Tried to updated to new ios 6.1 but the prep file failed in itunes...now my iphone4s is stuck on the screen to connect usb to itunes BUT nothhing happens when connected. HELP HELP

    tried to updated to new ios 6.1 but the prep file failed in itunes...now my iphone4s is stuck on the screen to connect usb to itunes BUT nothing happens when connected. HELP HELP
    I tired reboot the phone and placing the DFU BUT still the phone reverts back to itunes logo and ucb connection sceen

    Place the device in DFU mode, connect to the computer and restore.

  • Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

    Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.  I have tried uninstalling & re-installing Itunes but this didnt help. 
    Does anyone have any ideas? 
    Thanks for your help.

    I think the problem is that the iPod got set to Manually manage music and videos.  It needs to be set up for automatic syncing again.  Just unchecking that Manually manage music and videos setting does not do it.
    In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen.  In the sidebar (along left side of screen), there are two headings (Settings and On My Device).  Under Settings, click on Music.  To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
    Check the box at the top for Sync Music.  That turns ON automatic syncing for music.  Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod).  Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below.  Then click Apply.

  • IChat shows "Connecting..." but nothing happens

    Hi,
    All of a sudden my iChat won't connect. It just shows "Connecting..." but nothing happens, not even a timout message.
    I tried:
    -- Running Disk Utility and Repairing Disk Permissions
    -- Deleting the .plist and files in Preferences and Library
    -- Deleting iChat items in Keychain
    -- Connecting through port 443 instead of the default and also disabling SSL
    -- Removing iChat and reinstalling from the Leopard DVD with Optional Installs
    Nothing has worked. I tried connecting to my AIM and .Mac accounts through Adium and it works.
    It's my AIM and .Mac accounts that won't work. I tried my Google Talk account in iChat and it works ok.
    Disk Utility gives this:
    Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/setregion" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
    Warning: SUID file "System/Library/Printers/IOMs/LPRIOM.plugin/Contents/MacOS/LPRIOMHelper" has been modified and will not be repaired.
    ACL found but not expected on "Applications".
    Console is showing:
    iChatAgent[209] WARNING: AIMBuddyList::GetBlockingMode failed, result=80000008
    Please help!
    Message was edited by: m4c5i

    Hi,
    Welcome to the    Discussions
    When you start at the Discussion index Page you se folders next to the Category names.
    When you get inside some categories you have the Forums at the top then a list of the most recent posts.
    If you go to a thread directly you miss the top of the Forum where the "Post New Topic" spot is.
    In a thread use the option to return to Topic List.
    She will have to go to iChat menu > Preferences > Accounts and the Security tab and check she is Allowing the (Buddy's) Screen name. (And not Blocking it).
    The other thing to check is to make sure the Screen Name is spelt right.
    Can she see the Screen Name or other details in the Buddy List.
    11:18 PM Thursday; February 26, 2009

  • LaserJet 2605dn initializes, then ready, then says printing but nothing happening

    The 2605dn initializes, then goes ready, then when I try and print any config pages from the control panel goes to "printing" on the control panel but nothing happens.  Just sits there staring into space.  Any ideas?  User manual not helping and not able to find a service manual. 
    All toner cartridges are genuine HP and are full.  We did first get a "replace supplies" message but it cleared itself after checking toner cartridges.  Nothing out of the ordinary happened before this and there are no other error messages whatsoever.
    thanks
    This question was solved.
    View Solution.

    duh,....I guess I should have been a little more patient, I came back from lunch and said duh, ok, so, I reseated the jet direct, then reseated the formatter, suppose one of the connections was loose, came back up and shows correctly the ink supply now.  "IJW"  maybe it was a id-10-t problem.  "I need a vacation"..
    thanks anyways....

  • TS1369 my ipod has a charger on its screen pointing to a itunes symbol I have tried to connecting it to itunes but nothing happens

    My ipod has a charger on its screen pointing to a itunes symbol I have tried connecting it to itunes but nothing seems to happen.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Connected emac to tv but nothing happening

    Hi
    i've bought cables as discussed in topic:
    http://discussions.apple.com/thread.jspa?threadID=1846551&tstart=0
    i've connected cables but nothing is happening.
    is there anything i should be doing in system prefs or somewhere else ?
    any advice welcome
    twzz

    hi thanks for feed back -
    re: airport extreme
    I didnt know it was also a card as well as a base station - i accept what you say about the airport extreme CARD internal emac technology being somehow connected to mini-VGA port - though i'm inclined to think it indicates the target models of emac rather than a direct technical inter-dependance - tho i stand corrected. Mine is a pre extreme airport card emac model, requiring only the Apple airport card which slotted under the panel of the superdrive.
    re: Apple video adaptor M91096/A- my feedback here is :
    1. There is no info on apple support docs about non compatability of this adaptor with emacs but there is for the (now defunct) Apple video adaptor M8734G/A - which is confusing.
    2. The Apple video adaptor M91096/A has a mini-VGA connector which is misleading because these are only on certain older e/mac models - but it's wrong to assume that just because i/you have a mini-VGA port that it's going to work. People are automatically recommending the use of this adapter but not mentioning it's compatability issue in relation to the internal graphic card which is an issue nowhere plainly stated in any supoort docs or packaging but seems to be widley understood as the measure of if it will work or not.
    3. There is mis-match in the names used to identify the ports and connectors in support docs.
    - http://support.apple.com/kb/HT3014
    says that the emac has a VGA port - but it is also (correctly ?) known as a 'mini-VGA' port.
    - http://store.apple.com/us/product/M9109G/A
    the video adaptor in question identifies it has a 'mini VGA' connection but does not explain the issue of your emac /mac not being internally capable of utilising the adaptor.
    - http://store.apple.com/us/product/M8639G/A?fnode=MTY1NDA3Ng&mco=MjE0ODQ2Mg
    is often confusingly spoken of as the same product as the M9109G/A video adaptor elsewhere but is infact only a lead to connect to an external monitor to enable basic mirroring.
    Q.
    1.In terms of mini-VGA port capability - am i right in assuming there are only the two leads mentioned above ?
    2. Re: Rod's last post above - answer 2, - the 'scan convertor' set up would be because my tv is a glass tube style monitor (?) - but if i had an LCD or flatscreen - i'm assuming it would be plug and play. I've had a brief look at the world of scan convertors - it seems i could buy myself a cheap LCD monitor or even a new tv for the same price as a scan convertor !
    3.Re: Rod's last post above - answer 2 - 'DVI output capable' meaning DVA via the MINI-VGA port because of more powerful graphics card ..? Because i can in/output DV via firewire and usb..
    4. I notice the length of the VGA adaptor M8639G/A is tiny - i am assuming i can get basic extention cables to attatch to it ..?
    folks thanks for your sttention i hope the advice here claifies for others..
    twzz

  • Connect ipod to pc but nothing happens.

    when I connect the ipod to the pc nothing happens, I've recently purchased new tunes but they wont transfer to the ipod. A mate recently purchased an ipod shuffle and he purchased music on my pc and synched his ipod with my library to transfer songs, would this cause a problem for me? any ideas would be greatly appreciated, cheers

    First off.. Your PC needs to have the Lateset Version of iTunes Installed...
    See Here  >  http://www.apple.com/support/itunes/install/
    OK. Before doing anything... see ALL these Links...
    1)  Syncing with iTunes
    From Here  >  http://www.apple.com/support/ipodtouch/syncing/
    2) How to BackUp
    http://support.apple.com/kb/ht1766
    3) Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141
    4) Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991

  • MY FF22 wont INSTALL.....I have tried everything but nothing happens.

    My daughters Laptop is running Vista OS. FF version 6.
    I went to update her browser...
    I downloaded from the green button got a binary file called setup stub. went to install.... PC asked if ok to run I sed yes but got NO install. ....Nothing....I went back and started my browser in safe mode with any plugins etc disabled and still nothing happened I even told my a/v to disable....still nothing.... how do I get it to Install????
    .*BEYOND FRUSTRATED.*

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.

  • I am advised that an update is available but when I press the download button all that happens is that my macbook tells me it is connecting to the server but nothing happens.

    This problem occurs each time I try to download the update, currently 5.0, and I eventually have to close the attempt down

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • HT1212 My iPhone is Disabled. I connect it to iTunes but nothing happens. What should I do? I even forgot the password.

    I dont know what to do. PLEASE HELP ME. Any other options out there?

    Hi ..
    Follow the instructions from the link you posted from >   >  iOS: Forgotten passcode or device disabled after entering wrong passcode
    No other options.

  • TS4009 I am having trouble! My Ipad says it hsan't been backed up in 2 weeks and is locked to where I cannot open it.  I tried connecting to my laptop but nothing...

    I am having trouble with my Ipad. I am a windows user.  It says that it hasn't been backed up in 2 weeks.  I tried connecting to my laptop but nothing happens.

    If you haven't already done so, try it by holding the on/off and home buttons at the same time until you see the Apple logo, then releasing.

  • Nokia N8 - Connect USB cable to device

    My new nokia N8 is constantly coming up with the message "connect usb cable to device".
    I'll click ok and 2 minutes later it will reappear.
    When i connect it to a usb, it disappears but will then reappear when i unplug. I've tried updating software but none is available, and there is no programs running on the phone.
    When i turn off and on i still get the same problem.
    Anyone know of a solution before i throw it against the wall?

    vvaino wrote:
    Ok,
    Have you tried the trick  you can find from the phone's
    manual; long press the on/off button (for 8-10 sec) until the
    phone vibrates three times? With this, you don't lose any
    of your information.
    -vvaino
    That's barely a trick
    it just kills the power to the phone and is esentialy the same as using the on off switch
    anyway as to the OP don't know
    you could try resseting the device  type *#7370# into the dialer,
    this will restore the phone to an out of box stateand you will loose all of your settings
    see if that helps

  • Kernel Panic when I connect USB cable to use Rane Serato SL3

    Connect USB cable to use Rane Serato SL3 causes the following kernel panic. Used cable is an 5 meter USB-2 cable. This is 100% reproducable.
    Yes yes I know Rane does not officially support Mavericks yet however if I use another (shorter) USB-2 cable with the Rane Serato SL3 it's no problem. I also have an older Rane Serato SL1 and this device works (USB-1) perfect with the same 5 meter USB-2 cable and the same short USB-2 cable.
    I've taken the liberty to ask Rane what's going on and no succes there. They just don't seem to know.
    So you smart people over here, what's going on?  
    Here is the Kernel Panic:    
    Anonymous UUID:       944C81E9-22DD-96FF-FD1A-553E9CAD6B34
    Sat Nov  2 20:34:06 2013
    panic(cpu 4 caller 0xffffff800b8dc19e): Kernel trap at 0xffffff7f8debe166, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000000e538000, CR4: 0x00000000000606e0
    RAX: 0x00000000e0000200, RBX: 0xffffff8025405000, RCX: 0xffffff800bf024b0, RDX: 0xffffff802d0add08
    RSP: 0xffffff80fcbc3d80, RBP: 0xffffff80fcbc3da0, RSI: 0x00000000000a0014, RDI: 0x0000000000000000
    R8:  0x0000000000000051, R9:  0xffffff800be01910, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
    R12: 0xffffff801ecc1800, R13: 0xffffff802d0add00, R14: 0xffffff8025405000, R15: 0xffffff7f8debe200
    RFL: 0x0000000000010246, RIP: 0xffffff7f8debe166, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x4
    Backtrace (CPU 4), Frame : Return Address
    0xffffff80fcbc3a10 : 0xffffff800b822f69
    0xffffff80fcbc3a90 : 0xffffff800b8dc19e
    0xffffff80fcbc3c60 : 0xffffff800b8f3606
    0xffffff80fcbc3c80 : 0xffffff7f8debe166
    0xffffff80fcbc3da0 : 0xffffff7f8debee0f
    0xffffff80fcbc3dc0 : 0xffffff7f8c13aadc
    0xffffff80fcbc3df0 : 0xffffff7f8debe2a9
    0xffffff80fcbc3e00 : 0xffffff7f8c13aa20
    0xffffff80fcbc3e30 : 0xffffff7f8c139634
    0xffffff80fcbc3e60 : 0xffffff7f8debbaf4
    0xffffff80fcbc3ea0 : 0xffffff800bcae4b3
    0xffffff80fcbc3f00 : 0xffffff7f8debaa62
    0xffffff80fcbc3f20 : 0xffffff800b84a15a
    0xffffff80fcbc3fb0 : 0xffffff800b8d6aa7
          Kernel Extensions in backtrace:
             com.apple.iokit.IOAudioFamily(1.9.4f11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@0 xffffff7f8c135000->0xffffff7f8c163fff
                dependency: com.apple.kext.OSvKernDSPLib(1.14)[744516ED-C05D-340F-9867-F5E89B2E8BE5]@0xffff ff7f8c124000
             com.rane.driver.sl3.10.6(1.3.3f1)[46AEB5AC-AD52-3F5C-9927-59ABE444B435]@0xfffff f7f8deba000->0xffffff7f8dec5fff
                dependency: com.apple.iokit.IOAudioFamily(1.9.4fc11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@ 0xffffff7f8c135000
                dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f8c19a000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x000000000b600000
    Kernel text base: 0xffffff800b800000
    System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
    System uptime in nanoseconds: 431507508429846
    last loaded kext at 426057833798866: com.sophos.kext.sav          8.0.14 (addr 0xffffff7f8dec6000, size 24576)
    last unloaded kext at 426034845418472: com.sophos.kext.sav          8.0.14 (addr 0xffffff7f8dec6000, size 20480)
    loaded kexts:
    com.sophos.kext.sav          8.0.14
    com.rane.driver.sl3.10.6          1.3.3f1
    com.regularrateandrhythm.driver.RowmoteIREmu          1.0
    com.eltima.ElmediaPlayer.kext          1.58
    com.Cycling74.driver.Soundflower          1.6.6
    com.serato.usb.kext          2.3.0
    net.osculator.driver.OSCulatorIOKit          2.1
    com.squirrels.airparrot.framebuffer          3
    com.squirrels.driver.AirParrotSpeakers          1.7
    at.obdev.nke.LittleSnitch          4050
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AGPM          100.14.11
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AudioAUUC          1.60
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.kext.AMDFramebuffer          1.1.4
    com.apple.driver.AppleHDA          2.5.2fc2
    com.apple.driver.AppleMikeyDriver          2.5.2fc2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleHWAccess          1
    com.apple.AMDRadeonX3000          1.1.4
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleMuxControl          3.4.12
    com.apple.driver.AppleIntelHD3000Graphics          8.1.8
    com.apple.driver.AppleIntelSNBGraphicsFB          8.1.8
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.SMCMotionSensor          3.0.4d1
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.kext.AMD6000Controller          1.1.4
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.AppleThunderboltIP          1.0.10
    com.apple.driver.AppleUSBTCButtons          240.2
    com.apple.driver.AppleUSBTCKeyboard          240.2
    com.apple.driver.AppleIRController          325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AppleSDXC          1.4.0
    com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.DspFuncLib          2.5.2fc2
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAcceleratorFamily          98.7.1
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleGraphicsControl          3.4.12
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleHDAController          2.5.2fc2
    com.apple.iokit.IOHDAFamily          2.5.2fc2
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.kext.AMDSupport          1.1.4
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
    com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
    com.apple.driver.AppleUSBMultitouch          240.6
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.driver.AppleThunderboltNHI          1.9.2
    com.apple.iokit.IOThunderboltFamily          2.8.5
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOEthernetAVBController          1.0.3b3
    com.apple.driver.mDNSOffloadUserClient          1.0.1b4
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1

    Most likely, one of these is the culprit.
    com.sophos.kext.sav          8.0.14
    com.rane.driver.sl3.10.6          1.3.3f1
    com.regularrateandrhythm.driver.RowmoteIREmu          1.0
    com.eltima.ElmediaPlayer.kext          1.58
    com.Cycling74.driver.Soundflower          1.6.6
    com.serato.usb.kext          2.3.0
    net.osculator.driver.OSCulatorIOKit          2.1
    com.squirrels.airparrot.framebuffer          3
    com.squirrels.driver.AirParrotSpeakers          1.7
    at.obdev.nke.LittleSnitch          4050
    Boot into safe mode (restart holding down SHIFT key). If no KP, then disable these, reenable one at time to determine which. If KP, then most likely hardware related. Run the Apple Hardware Test suite, extended tests at least twice, followed by Rember.  See
    OS X About kernel panics,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics,
    How to troubleshoot a kernel panic, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • TS1538 i cant connect my iphone to laptop. its nither charging nor connecting :( usb cable is okay .... can any one help ??

    i cant connect my iphone to laptop. its nither charging nor connecting usb cable is okay .... can any one help ?? pls...

    BOB we need you urgently
    Perhaps Bob will see this thread, he is the professor in these cases.
    You do not use a WEP password but wpa/wpa2 on router and equipment.
    All equipment connects to WiFi, but for your iPad.
    Even with all other equipment WiFi off, you cannot connect your iPad.
    Your iPad connects to other WiFi nets correctly.
    All resets etc done on iPad and Router.
    Still I am not sure it is your router for sure, frustrating...
    I want to test 2 other things:
    1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
    2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

Maybe you are looking for

  • ORA-14400

    Hey Guys, I am loading data into a cube (business content cube) from standard extractor. I got this error "ORA-14400: inserted partition key does not map to any partition" when I checked the monitor. What is confusing is the fact that I don't have an

  • Preventing Premiere Project files from being modified

    I'm creating a batch of Premiere Pro CC Projects for trainees in my work environment to help them learn the application.  I'm trying to lock the project files so they always start out in the same state I left them.  I don't want the students to open

  • Slow - and essential icons missing

    Hi I have just downloaded Safari 4 and must say I am not impressed. I repaired disk permissions and cleared cache etc under Safari reset but it is very slow. Also - the task-bar icon for stop\refresh has gone - not available under task-bar icons - wh

  • Standar Workflow for PR

    Dear all, I want to ask... I copied standard workflow wf_req_rel_c ( for PR overall)  to zwf_req_rel_c and then i fill the agents and also i create the binding between the event, workflow and tasks and I add rule 20000026 to task TS20000159 when the

  • CD drive opening on boot (solved)

    My cd/dvd drive opens when I boot  and won't finish unless I close it. This is pre grub so its hardware  ??. Last edited by normc (2008-04-25 02:24:07)