Installing Leopard using External Monitor

I recently had an accident with my Macbook Pro, and even though the screen is now totally worthless, EVERYTHING else works. (Talk about a testimony story.) It works fine when I hook up an external monitor.
I need to reinstall Leopard on it, but when I boot from the installation disc to do it, F7 no longer works to toggle over to "mirror" mode, so it's impossible for me to see the installation screen. Any tips?

bazzoonboy wrote:
I recently had an accident with my Macbook Pro, and even though the screen is now totally worthless, EVERYTHING else works. (Talk about a testimony story.) It works fine when I hook up an external monitor.
I need to reinstall Leopard on it, but when I boot from the installation disc to do it, F7 no longer works to toggle over to "mirror" mode, so it's impossible for me to see the installation screen. Any tips?
Welcome to Apple Discussions:
You need another similar computer. Boot yours in the Target disk mode, the other normally and install Leopard from the working computer with the screen. Oh, yes, connect them with a FireWire cable. It's really that simple.
Message was edited by: nerowolfe

Similar Messages

Macbook Pro 15 Late 11 extreme fans noise when using external monitor

Dear Apple, recently I bought Macbook Pro 15 Late 11. I really love it's speed and new OS X Lion, BUT this Macbook really noisy when I use external monitor and keyboard. I work on external monitor all the time. I don't care about how hot my Macbook is when I'm on external monitor. Let it just be hot and quiet.
P.S. Example. I run Ableton Live and have 6200 RPM working on external monitor (awfully loud!). CPU 90% idle. When I switch off external monitor and use internal one, RPM drops down to 4500 with the same Ableton work session. By the way, I don't need cool graphic card. Apple, let our work days be quiet.

I did that and it didn't help. It's common problem with an external monitor. Here are some links:
http://forums.macrumors.com/showthread.php?t=1162550
http://www.ivy-rose.co.uk/Articles/Macbook-Pro-Cooling-Issues

GS70 Stealth Pro Crashes when using external monitor..

Hi Guys,
I just bought a GS70 ghost pro a few weeks ago and have been loving it, no problems, running Battlefield 3 and watchdogs..
However I just bought an external monitor, Asus VG248QE, when i connected it via display port and tried to play Battlefield 3 on the external monitor the laptop crashed - both screens blank- fan on- power button went orange- had to hold down the power button to reset.
Tried it again, opened Bf3 in window mode, put it on external monitor, went to full screen - it played ok for a few minutes then the laptop crashed again..
I had played bf3 no problems on the laptop screen previously.
Anyone got any ideas what might be going on? I'm new to gaming on pc so I'm a bit lost, any suggestions would be welcome.
Thanks,
Dan

Which nvidia driver are you using? (latest one from nvidia GeFormce Experience or MSI website)
Try to use the one from MSI website and update the latest VBIOS(80.04.F7.00.0C).
http://www.msi.com/support/nb/GS70_2PE_Stealth_Pro.html#down-firmware&Win8.1 64
step by step guide:http://www.msi.com/files/pdf/VBIOS_Update_under_DOS_mode_EN.pdf
Can you check the CPU and GPU temperature under two situation? (1. when running without external monitor 2. using external monitor)

Using External Monitor (Closing Laptop shut down image on external)

I am always having to RESTART the MBP to get the screen on the external monitor exclusively. I usually use my MBP with external monitors but when I close the laptop the external goes blank too. Then i have to restart and close the laptop very quickly.
Is there some way to do this without restarting computer each time? (close laptop but keep image on external monitor).

My 'wish' is to be able to hot switch without 'sleeping' the MBP as this interrupts backups and network drives etc.
You mean that you want to be able to go from clamshell mode to open MBP with its display in use? As far as I know this isn't really possible. I'm not at home at my external screen right now so I can't test for sure... but as far as I know as soon as you are in clamshell mode the internal display is deactivated. Have you tried opening it up while its in clamshell mode and then unplugging the display? Maybe if you open it while in clamshell mode, and select "Detect Displays" before unplugging the external screen, the MBP display will come back on. In my mind, this should cause the MBP display to come on, but I'm not sure and I'm not in a position to test it now unfortunately. When I get home I'll check it out for you and see what I can figure.
You're right though, the best solution right now may be to leave the MBP open, use the external display in "mirror" mode, and dim the display of the MBP down to nothing using F1/F2.
One more thing: When I started using external monitors and projectors, I did not use the menubar item for "Displays". But, I've since started using it and it really makes things much more simple for managing external displays. You can turn it on in System Prefs --> Displays. Then you can detect displays, adjust their resolution, and change the mirroring settings on the fly without System Preferences.
--Travis

Using EXTERNAL Monitor (eSata question too) do you need KEYBOARD Attached?

First, do you need a keyboard attached? I ask as I can't seem to figure out how to use external MONITOR and CLOSE the macbook pro to watch STREAMING video as the computer goes to sleep.
Have tried using the F7 as well as in display preferences moving the DOCK to various monitors, regardless, it still goes to sleep when I shut the MBP, so am wondering if a keyboard has to be attached as it doesn't know you are watching video.
Second thing, I want to use the EXTERNAL to WATCH STREAMING video, however, if I click on FULL SCREEN (external) which is using Silveright, both DISPLAYS go FULL Screen. For the life of me I cannot get external to display FULL SCREEN and have the MBP open to use for other things, work, net browsing, et-cetera.
Thanks.

I ask as I can't seem to figure out how to use external MONITOR and CLOSE the macbook pro to watch STREAMING video as the computer goes to sleep.
If your MacBook Pro goes to sleep who will stream the video?
For the life of me I cannot get external to display FULL SCREEN and have the MBP open to use for other things, work, net browsing, et-cetera.
If the mirror display is turned off in the "Display" preference, you would be able to (usually) watch videos in full screen in the external display and work in your main display. But some application may not support this. Check if the application that you are using for streaming video has any preferences to deal with the external display, if not, see if there is any other application that would solve the problem.

Using External Monitor as Main Screen during OS Install?

I have a MacBook whose screen has gotten trashed (less than half of the left side visible), and I am resigned to using an external monitor. But I need to re-install Leopard. When I boot from the DVD, the trashed screen is the main one, and the external monitor is active, but the installer screens won't drag. Obviously I can't get to the Monitors Preferences to reset the main screen. BTW, resetting the main screen to the external monitor doesn't persist across the reboot.
SO: Is there a way to use the keyboard OR is there a Terminal command for switching the main screen to the external monitor?
Thanks in advance for any tips.

Try this trick. Get everything set for the install. You can have the disk in the drive so it is ready to rock as soon as you start. Have the external display hooked up. Turn off your MacBook. Now hit the on switch. As soon as you do close the display on the MacBook this will force the MacBook to use the external display as the main Monitor. Now do your install. You can open the MacBook and the internal display will stay off and the external will continue being the main monitor. This will allow use of the keyboard if you don't have an external one.

Installing Leopard using my second monitor?

I'm trying to help my mother install leopard. I got her a Powerbook a while back, but in the interim her cat knocked her computer off the table and screwed up monitor (thankfully that was all!). It was too much for us to get it repaired, so I bought her a monitor keyboard and mouse to use, so now she basically has a "messy" desktop computer. (I cringe, but she loves it..).
The problem is, even when I have the second monitor set as the "main" monitor, the installer will only run on the broken laptop monitor... it does not want to run on the working monitor! I can't move the installer window or anything, and I can't see the prompts to get the installation going...
Any ideas other than getting her laptop fixed?

Hey -
I talked to someone in an apple store, and they said it is possible if you have a second apple computer and a firewire cable. Apparently you can load an OS using Target Disk Mode (hold down the "T" key on the laptop with the broken screen during startup), and put the install DVD into the working Apple computer. If the computers are connected via Firewire cable, the hard drive for the broken screen laptop should show up as a hard drive on the working computer. Run the installer on the working computer, and just select the hard drive of the broken one as the destination drive to install on, and apparently it'll work great.
Unfortunately, I have not been able to make sure this works myself as I am back from visiting my mother and did not have a firewire cable to use while I was there.... I will try it the next time I visit, but the good news is the employee said there should be information on their site for how to Install an OS using Target disk mode, and he was somewhat right. I found this support post that should be helpful to you.
http://docs.info.apple.com/article.html?artnum=58583
If you could post up your results when you're done and let me know if it worked, I'd appreciate it. My mother needs a new computer in the near future anyway, but she only uses it for email and the internet so it would be much more cost effective to just keep her current laptop up to date, rather than buy her a new iMac!
Good luck!
(P.S. I'm not sure what YOUR reasoning is behind not fixing your laptop monitor, but I did some research and you can find the necessary monitor part on eBay, and bring it in to an Apple certified shop, or chance it yourself, and according to my estimates, the cost was cut in half or more! I'm fairly tech savvy, so I would've attempted it myself, but the eBay post I found offered the screen, casing, and instructions for about $400... that's much better than the $1300 quote I got from Apple! Even if you brought it to a shop and only paid for "labor" it would still be less than if they got the part for you and marked it up.)

Using External Monitor to Install OS?

I have a cracked, unusable iBook screen. Is there a way to install Tiger on it using an external monitor?

Why is your internal hard drive getting full? It would be more ideal to move or store large stand alone files to the external instead and keep all of your Applications on the internal system drive. However if the Application is fully self contained like most Mac OS X Applications then you can simply copy or move it to the external drive and run it from there. You could possibly designate the external drive as the install location if installing from scratch. But again it would be better to keep it on the internal drive.
George

Installing Leopard on external drive then using as Internal

I have a family member that found a nice deal on a Macbook, but it has no HDD nor install CDs/DVDs. I want to buy her a HDD and then install Leopard on it and send it to her. I know that if you have 2 Macbooks, I can switch the HDDs from one to the other and the Macbooks will boot up on the HDDs. My question is, if I have a PowerMac G5 and I install Leopard (Universal Disc) onto a 2.5in HDD using an external case, will she be able to just pop it into her Macbook or do I have to install using a Macbook too? Thanks!

Can't be done. The machine she has must get the original discs from the owner.
If the original owner lost the discs, they must call AppleCare to get replacements for them.
Macs should never be separated from their discs. I warn against this on my FAQ*:
http://www.macmaps.com/usedrefurbished.html
You can't copy the operating system, as it is only licensed for your use on your machine.
As long as they are not in the same household that license only belongs to you alone.
And then if they are in the same household, you still need to buy them a family license so you can install it on multiple Macs.
- * Links to my pages may give me compensation.
Message was edited by: a brody

Installing Leopard using an external dvd rom

I am unable to install Leopard on my iMac G5 due to a defective superdrive. Can i install it using an external dvd rom? pls HELP!

If it uses FireWire it should work. Boot while pressing Option. When he cursor changes to a arrow, select the DVD, then click the straight right-pointing arrow.

How to blank laptop screen when using external monitor/

Hi there
I need some help with figuring out how to configure my xorg.conf for my Arch Linux 64 bit installation on a HP Pavilion dv 5000 laptop so that I can automatically blank my laptop screen when using an external monitor. I have Arch Linux installed along with Ubuntu Feisty. In Ubuntu my external monitor (Viewsonic 1912WB) was not detected at the time of installation but with the native 1280X800 resolution that is good for the laptop takes effect for the external monitor automatically when the external monitor is plugged in. The laptop monitor goes blank when the external monitor is plugged in.
In my Arch Linux installation I have not been able to configure a dual head configuration using the ATI Radeon drivers (fglrx). I have the native 1280X800 resolution set up for the laptop monitor and this resolution takes effect for the external monitor also. However the laptop monitor also continues to function when the external monitor is plugged in. I would like to blank the laptop monitor when using the external monitor.
I am attaching my Arch Linux xorg.conf and the Ubuntu xorg.conf below. Thanks for anyone who can help, I am having a lot of difficulty in figuring out how to set up xorg.conf among all the things that I have had to learn so far in Linux and I am a relative newcomer to the whole thing. I have tried to compare the two xorg.conf files and edit my Arch xorg.conf in accordance with the Ubuntu one but it did not work and I keep getting errors!
I am using XFCE as my Desktop environment.
Arch Linux xorg.conf
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# Files section. This allows default font and rgb paths to be set
# Server flags section.
# Input devices
# Core keyboard's InputDevice section
# Core Pointer's InputDevice section
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option    "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option    "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option    "XkbRules" "xorg"
Option    "XkbModel" "pc104"
Option    "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option    "Protocol" "Auto" # Auto detect
Option    "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option    "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 30.0 - 62.0
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option    "VendorName" "ATI Proprietary Driver"
Option    "ModelName" "Generic Autodetecting Monitor"
Option    "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "* Generic VESA compatible"
Driver "vesa"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "* Generic VESA compatible"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Ubuntu xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Driver "ati"
BusID "PCI:1:5:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection

Xrandr 1.2 provides means for this. But today the only supported configuration is xorg-server-1.3 + xf86-video-intel-2.0. So for Radeon you'll have to wait for drivers that support Randr 1.2.
On my laptop (Thinkpad x60s) that would be:
xrandr --output VGA --auto
xrandr --output LVDS --off

HT2494 Reboot my Macbook Pro when using external monitor w Thunderbolt to VGA adapter

I have a Macbook Pro running 10.9.2 OS X (MacBookPro8,1). I never had any problem w that but yesterday i bought an external monitor (kind of old model from LG - L1900E). Well, i was trying to extend my Macbook Pro display through a Thunderbolt to VGA adapter. It worked at first but it started rebooting my Mac. I just disconnected that and the reboot stopped.
It sounds to me like a Software related BUG regarding connection or something strange.....
I would like to have some help on how to proceed w that ? Is there a specific SW i need to install to use that ?
I am kind of disapointed because i heard that one of the major items the new OS X was about external displays.....
Looking forward a help from an apple specialist, Tks !
Marcello H. Ishida.

Examine these instructions:
http://support.apple.com/kb/ht3131
Ciao.

Reboot my Macbook Pro when using external monitor w Thunderbolt to VGA adapter

I have a Macbook Pro running 10.9.2 OS X (MacBookPro8,1). I never had any problem w that but yesterday i bought an external monitor (kind of old model from LG - L1900E). Well, i was trying to extend my Macbook Pro display through a Thunderbolt to VGA adapter. It worked at first but it started rebooting my Mac. I just disconnected that and the reboot stopped.
It sounds to me like a Software related BUG regarding connection or something strange.....
I would like to have some help on how to proceed w that ? Is there a specific SW i need to install to use that ?
I am kind of disapointed because i heard that one of the major items the new OS X was about external displays.....
Looking forward a help from an apple specialist, Tks !
Marcello H. Ishida.

Examine these instructions:
http://support.apple.com/kb/ht3131
Ciao.

Possible to Install Leopard on External HD and Boot on Another Mac?

Is it possible to install the Leopard upgrade DVD onto an External HD, AND THEN use the external HD to boot Leopard onto another Mac? Also, since the upgrade disc is an "upgrade," would I have to first install Tiger onto the External HD?
If possible...
Am I able to create an External Boot Drive that can boot both onto a PPC Mac and also onto an Intel Mac? Or will I have to create separate partitions?
Lastly, can Intel Macs boot from an External USB Drive? Or are FireWire Drives required? Thanks!

Yes, you can install on an external drive and boot the Mac. I do it all the time.
I'm not 100% sure whether the same drive can boot PPC and Intel Macs -- I don't think so because PPC macs require Mac formatting and Intel Macs require GPT formatting to boot.
Intel Macs can boot off both USB and Firewire external drives. PPC Macs can only boot off Firewire external drives. In any case, Firewire is better as it's quite a bit faster.

Can't use external monitor as default monitor for full-screen settings

Hey guys,
I have been trying to get quicktime to let me use my external monitor as the full-screen monitor. Every time I go into full-screen, it reverts back to my MBP screen.
I cannot seem to find this option even in the fullscreen preferences. Rather than having an option I can click on (like I've seen in pictures), it just says "Movie Size." I have Quicktime Pro 7.5.5 and I am running Leopard.
Any ideas? I can play most of my movies on VLC, but since I paid for Pro it would be nice if I can get it to work on my external monitor.

I have to say, I am in exactly the same place ppshr150 is. I have checked both Quicktime and Quicktime Player preferences and the option to choose a default screen for full-screen presentation of movies does not exist.
I can drag movies over to the second monitor and then press Command F and they will play there but from a presentation perspective, this is rather unprofessional.
It surprises me that Apple does not have this option. Or is it a bug they haven't/won't fix?

Installing Leopard using External Monitor

Similar Messages

Maybe you are looking for