Installing license for solution manager in DS (user/PW : sap*/pass)
Dear Experts,
I need to install license for the solution manager in the Discovery system 3.
I made 3 mistakes while logging in, so, the user/PW : sap*/pass can't logon to the system.
Can you please help me find how to log on to the client 001 of the solution manager when the user: sap* and PW : pass is unable to log on?
Thanks
Regards,
Sudeep
Hi Sudeep,
As per the Quick guide for V3, to login to Solman Client 001, the user /pw - : sap*/admin123
Since the sap* is locked, login with admin/admin in client 001 and unlock the required user account.
R,
Chaitra
Similar Messages
-
Temporary license for Solution Manager?
Hello all,
I have installed Solution Manager 7.0 on Linux /Oracle system. The license is getting ready to expire. Is it possible to get a temporary license for Solution Manager?
TIAyou already have a temporary license... and it is about to expire, you cannot install a temporary license on top of an existing one.
you will need to ask your super user to request a license key for you... or ask him to add authorization to do so.
unless you hack your license, there are no other way.
note that you can still login into client 000 with user SAP*, even after license expiration. -
Installing License in Solution Manager 4.0 - SAP BASIS 7.0
Hi, I installed SAP Solution Manager, I request my unlimited license at SAP Marketplace, they send me the file, however in slicense transaction - New licenses I load my file and no errors show me. However when finish load of file, license status is not active (green) but it is red and show me as "Not yet valid". I restart my server and delete temporary license and nothing happend, message is the same. Is important know than licenses in new version (SAP BASIS 7.0) and ECC 6.0, installation is not equal than old version. The file with the key must be imported from slicense transaction - new license and no write directly to slicense transaction fields.
Thanks.Obviously you have to upgrade SAPKW70012 first as its the prerequisite of Basis support pack. So just import this support pack then you can only continue for Basis patch.
There is a sequence in which patch can be imported, when you apply any patch it shows the prereuisites of that patch so just follow the same.
Regards
Subhash -
Install guide for solution manager 7.1
HI,
i want to install solution manager 7.1 in linux system
and i not find in SDN the install guide
did you now where i can find it?
best regards
Naor ShalomThe installation guides are not available on the SDN but at
http://service.sap.com/instguides
Markus -
I can't find any support package for Solution Manager 4.0
I can't find any support package for solution manager at
Support Packages and Patches - > SAP Technology Components
SAP Technology Components
GATEWAY
JAVA LOG VIEWER
SAPCAR
SAP EXCHANGE CONNECTOR
SAP CR CONTENT
SAPROUTER
SAPSECULIB
SAPSSOEXT
I'm searching it at a wrong place?You´re at the right place - but your user doesn´t seem to have permissions to download them.
You have a license for Solution Manager?
Markus -
Process for applying for Solution Manager Key?
I have to install a NW2004s system in a AIX Machine.
I understand that i need a solution manager key for installation. We dont have solution Manager installed in our Landscape. But i came to know that i can request for a solution manager key from SAP
Please let me know the website, process for applying for Solution Manager keyBalaji,
This is interesting, SAP is pushing customers to have solution Manager installed with features like Solution Manager Key, Maintainance Optimizer etc. It will get difficult for customers who do not have solution Manager running on their site.
You will have to create support message under the component XX-SER-SMKEY and request for solution manager key, provide them all the details of your system.
Cheers,
Nisch -
Installing the License Key for Solution Manager installation
Hi,
Any Idea how can I get License Key for solution manager installation? Solution manager installation do not requires a key of Solution Manager.
When I want to download a new license file form the SAP market place.SAP I ask for a key of Solution Manager.
ThanksI guess it is hardware key. Go to the Tcode slicense and there you will be able to find out the active hardware key. Take it!!
-
Default user for solution manager
Hello,
i just finished installing the Solution Manager and now i have a problem with logging in to the Solution Manager.
I configured the Sap frontend and can log in with several users which names occured during the installation but all of them have no rights to any transactions.
is there a default adminuser after installation ?SAP*
DDIC -
Problem in installation of Business Content for Solution Manager
Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lotHI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar -
Wily Introscope Version for Solution Manager 7 SPS 17
Hi
We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
Looking in the SWDC there are downloads in SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
Thanks for any help.
Paul.Hi Bhudev
Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
the first 2 (of 23) setups are failing :
SSO The value of profile parameter login/accept_sso2_ticket could not be checked
BI Cannot invoke CCMSBISETUP on host localhost
Warning :
User(BI) Role SAP_BI_E2E does not exist
Then it says :
To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
I cannot find this Diagnostics Setup Guide for SP17 ?
The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
Thanks,
Paul. -
What are installations material for Solution Manager 7.0 EHP 1
hi friends,
we plan to do installing Solution Manager 7.0 ehp1,
can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
thanks..https://service.sap.com/swdc
-> SAP Installations and Upgrades
-> Installations and Upgrades - Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 7.0 EHP 1
-> Installation and Upgrade
Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
Installation.
Nelis -
ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS
Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeemHi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok -
Regarding Monitoring Service for Solution manager
We need to configure "Monitoring" services in SAP solution manager 7.0.
Could somebody suggest us what are the main tasks we need to consider for doing Monitoring settings.
How many Minimum servers required to configure Monitoring services in solution manager system.
Also if any good document reference for this?
ThanksHi Jai,
welcome to sdn.
COMPONENTS & TOOLS OF SAP NETWEAVER
SAP Solution Manager
The SAP Solution Manager application management solution facilitates technical support for distributed systems u2013 with functionality that covers all key aspects of solution deployment, operation, and continuous improvement. A centralized, robust application management and administration solution, SAP Solution Manager combines tools, content, and direct access to SAP to increase the reliability of solutions and lower total cost of ownership.
With SAP Solution Manager, you can be sure your entire SAP solution environment is performing at its maximum potential. The toolset addresses your entire IT environment, supporting SAP and non-SAP software and covering current and forthcoming SAP solutions. And, as a customer of SAP, you have full access to the core SAP Solution Manager for no extra charge.
SAP Solution Manager targets both technical and business aspects of your solutions, focusing strongly on core business processes. It supports the connection between business processes and the underlying IT infrastructure. As a result, it eases communication between your IT department and your lines of business. And it ensures that you derive the maximum benefits from your IT investments.
SAP Solution Manager features and functions include:
SAP Business Suite implementation and upgrades u2013 SAP Solution Manager provides content that accelerates implementation. Configuration information and a process-driven approach to implementation speed the blueprint, configuration, and final preparation phases. SAP Solution Manager enables efficient project administration and centralized control of cross-component implementations.
Change control management u2013 SAP Solution Manager controls all software and configuration changes of the IT solution. This includes the approval process for change requests, the deployment of changes, and later analysis of changes. This ensures quality of the solution and enables traceability of all changes.
Testing u2013 SAP Solution Manager speeds test preparation and execution. It provides a single point of access to the complete system landscape and enables centralized storage of testing material and test results to support cross-component tests.
IT and application support u2013 The service desk included in SAP Solution Manager helps you manage incidents more efficiently and eases the settlement of support costs. Centralized handling of support messages makes the support organization more efficient.
Root cause analysis u2013 The diagnostics functions in SAP Solution Manager allow identification, analysis, and resolution of problems, even in heterogeneous environments. This helps to isolate general performance bottlenecks, to isolate exceptional situations, to record the activity of single users or processes, and to identify changes to the productive landscape. As a result, problem resolution is accelerated and business availability increased.
Solution monitoring u2013 SAP Solution Manager performs centralized, real-time monitoring of systems, business processes, and interfaces, which reduces administration effort. It can even monitor intersystem dependencies. Proactive monitoring helps you avoid critical situations, while automatic notifications enable fast response to issues.
Service-level management and reporting u2013 SAP Solution Manager allows easy definition of service levels and provides automated reporting. Service reporting covers all systems in the solution landscape and provides a consolidated report containing the information you need to make strategic IT decisions.
Service processing u2013 SAP Solution Manager makes appropriate service recommendations and delivers SAP support services. These include SAP Safeguarding, which helps you manage technical risk; SAP Solution Management Optimization, which helps you get the most from your SAP solutions; and SAP Empowering, which helps you manage your solutions.
Administration u2013 Administration tasks are mainly executed locally on the involved systems, but can be accessed and triggered from a central administration console. The administration work center in SAP Solution Manager offers a central entry point and unified access to all SAP technology.
SAP Solution Manager as the name suggests is for managing the whole gamut of SAP and Non-SAP solutions in the IT Landscape of an organisation. It provides you the tool, content and gateway to create, operate, manage and monitor your solutions over time.
It provides a range of scenarios to support this. Extending from project management to Solution Monitoring to Service Desk to E-learning Management, it provides an efficient way to carry out a plethora of business tasks.
SAP Solution Manager is the successor to ASAP ValueSAP. SAP Solution Manager helps in implementing and managing complex system landscapes. Globally systems are getting distributed across geographies and business processes cover more than one system. In such complex scenarios, integrating technical and business requirements is important for the success of IT. SAP Solution Manager provides SAP customers with an efficient means of handling both the technical and business process side of solution implementation .
As part of SAP Solution Management Solutions, the customers receive best practices relating to:
- Global Strategy and Service Level Management
- Business Process Management
- Management of MySAP Technology
- Software Change Management
- Support Desk Management
SAP delivers this using support programs during implementation of the system solution. Some of the benefits of using SAP's Solution Manager are that it helps:
- Manages the technical risk associated with the implementation of the solution ensuring technical robustness
- Helps leverage users core competencies in implementing solutions
- Ensures solution works as intended with best practices built in.
see these links...
http://www.ne-sap-solution-manager.com/
http://www.saptechies.com/category/sap-solution-manager/
thanks
karthik
reward me if usefull -
BI content for Solution Manager 4.0
Hi Experts,
I want to install BI content for Solution Manager 4.0 but i don't know what kind of BI content i need and where can i get some information about this.
if somebody knows somthing , please , let me know.
Thank you.There isn't a lot of standard content for Solution Manager. It's mostly alerts, server, module, database and overall system information for the environments connected to that Solution Manager instance. The standard DataSources are:
0SM_DSWPBI_BPM BPM Data (Alert Data)
0SM_DSWPBI_DB390
0SM_DSWPBI_DB400 DB400 Data
0SM_DSWPBI_DBADA Adabas Data
0SM_DSWPBI_DBDB2 DB2 Data
0SM_DSWPBI_DBINF Informix Data
0SM_DSWPBI_DBMSS SQL Server Data
0SM_DSWPBI_DBORA Oracle Data
0SM_DSWPBI_MODUL Module Data
0SM_DSWPBI_PERF Performance Data
0SM_DSWPBI_SERVER Server Data
0SM_DSWPBI_SYSDATA System Details Data
0SM_DSWPBI_SYSTEM System Data
There are several InfoCubes, one for each DataSource in the standard content. These InfoCubes are then unioned in a standard content MultiProvider. -
Language Import for Solution manager
Hello All,
I have a simple query regarding solution manager 7.0 language import using SMLT.
I have a requirement where my Poland users need to use solution manager in polish language.
The problem I am facing is that I am not able to find POLISH language import on service market place.
Could some one please help me find the polish language import for solution manager 7.0.
Eagerly awaiting your reply.
Regards,
Gurudath PaiDear customer
Polish isn't a supported language. Check service.sap.com/pam
Chinese Released 16.12.2005 Released 16.12.2005
English Released 16.12.2005 Released 16.12.2005
French Released 16.12.2005 Released 16.12.2005
German Released 16.12.2005 Released 16.12.2005
Hebrew Released 16.12.2005 Released 16.12.2005 Comment
Japanese Released 16.12.2005 Released 16.12.2005
Korean Released 16.12.2005 Released 16.12.2005
Portuguese Released 16.12.2005 Released 16.12.2005
Russian Released 16.12.2005 Released 16.12.2005
Spanish Released 16.12.2005 Released 16.12.2005
Maybe you are looking for
-
Dear All, while doing MIGO(GR) the message comes "item not selected in document". Please suggest what i can do to process. Thanks and Regards, Baiju
-
HTML5 Zoom Are Shows Wrong Image
Hi All, I have a Captivate 6 Project that is being published ot HTML5. Some of the Zoom areas zoom into what that area looks like later. In other words, I wan to zoom into a menu, instead it sooms into an image that shows later in the slide. The s
-
I have photoshop CS4, and whenever I try to sample an area to clone, then clone the area to the place I want, the entire image moves around, and I can't clone anything. When I am moving the image, there seems to be another same exact picture undernea
-
Hi, when I run my application project, I get error of timezone. I have set server's OS time zone in jdev.conf file but problem still exit. Farooq
-
Hi, Can't sync iCal and Entourage calenders. Had this working but upgraded (hah!) to Outlook for Mac and now going back to Entourage won't sync. iCal external sync is crashing daily according to crash log. Have tried deleting syncs and starting again