Installing License in Solution Manager 4.0 - SAP BASIS 7.0

Hi, I installed SAP Solution Manager, I request my unlimited license at SAP Marketplace, they send me the file, however in slicense transaction - New licenses I load my file and no errors show me. However when finish load of file, license status is not active (green) but it is red and show me as "Not yet valid". I restart my server and delete temporary license and nothing happend, message is the same. Is important know than licenses in new version (SAP BASIS 7.0) and ECC 6.0, installation is not equal than old version. The file with the key must be imported from slicense transaction - new license and no write directly to slicense transaction fields.
Thanks.

Obviously you have to upgrade SAPKW70012 first as its the prerequisite of Basis support pack. So just import this support pack then you can only continue for Basis patch.
There is a sequence in which patch can be imported, when you apply any patch it shows the prereuisites of that patch so just follow the same.
Regards
Subhash

Similar Messages

Installing license for solution manager in DS (user/PW : sap*/pass)

Dear Experts,
I need to install license for the solution manager in the Discovery system 3.
I made 3 mistakes while logging in, so, the user/PW : sap*/pass can't logon to the system.
Can you please help me find how to log on to the client 001 of the solution manager when the user: sap* and PW : pass is unable to log on?
Thanks
Regards,
Sudeep

Hi Sudeep,
As per the Quick guide for V3, to login to Solman Client 001, the user /pw - : sap*/admin123
Since the sap* is locked, login with admin/admin in client 001 and unlock the required user account.
R,
Chaitra

Can't update Solution Manager(7.1) SAP BASIS - conflict in update packages

When I try to update SAP_BASIS (702) with Service pack SP13 to SP14 (using SAPKB70214), a conflict arises. SPAM claims that the package requires pre-installation SAPKITL711 (Pack ST 710). However, the search for SAP Software Download Center showed that this package does not exist in nature, and the last packet is numbered as SAPKITL710 (ST 710: SP 0010)
Where am I wrong? Perhaps SP14 and SP15 SAP_BASIS (702) generally are not intended for installation?

Hello Michael,
SAP claims at https://service.sap.com/sp-stacks that SP11 for ST should be at 12 of march
But they also claims this :
Disclaimer:
Be aware that the information contained in this schedule is subject to change. SAP does not guarantee the availability of an SP Stack on the specified date.
The SP Stack frequency of a product version may change during its lifecycle. The distribution of SP Stacks throughout the year may also vary from one year to another.
BR,
K.

Temporary license for Solution Manager?

Hello all,
I have installed Solution Manager 7.0 on Linux /Oracle system. The license is getting ready to expire. Is it possible to get a temporary license for Solution Manager?
TIA

you already have a temporary license... and it is about to expire, you cannot install a temporary license on top of an existing one.
you will need to ask your super user to request a license key for you... or ask him to add authorization to do so.
unless you hack your license, there are no other way.
note that you can still login into client 000 with user SAP*, even after license expiration.

SAP Solution Manager Adapter for SAP Quality Center by HP (ST-QCA)

Hello Folks,
I am configuring Solution Manager, and the current activity asks to download to add-ons that I can't find in the Marketplace - they are required to activate Solution Manager Enhancements:
SAP Solution Manager Adapter for SAP Quality Center by HP (software component: ST-QCA)
SAP Support Enablement package (software component: ST-SEP)
Does anyone know where to get those components?
Thanks a lot,
Marco

Hi Ravindra babu/ Murali:
I have one very quick doubt and would be really glad if you can help clarify.
As per documentation from SAP and also IMG screens etc. it seems like 'a project' in SolMan will hand-shake with 'a project' in QC.
Can I therefore assume that if there is only one instance of SolMan (productive) and one QC server alone (again, productive), any number of trials I carry out between SolMan project and QC project will not spill over into other projects in these two systems and thus have no impact whatsoever at server level.
The reason for my asking this - in my project, Testing has started using QC in a standalone mode already. We have just one server. If I have to carry out any tests/ demo between SolMan and QC, it shouldn't impact other 'standalone' projects being done in QC.
Regards,
Srini

Solution Manager and a SAP GRC AC 5.3

Hello,
We have a Solution Manager and a SAP GRC AC 5.3
We ant to know if somebody knows how to connect or the architecture os infrastructure to connect the Solution MAnager with the GRC.
What we have to do is... If someone in the Solman does a user or role request, the SAP GRC gets this request and begins the necesary workflows.
I need help
Best regards.
Pablo Mortera.

Hi,
As per your requirement, you want that the request should be automatically trigerred from Solman to GRC.
In GRC, CUP is used to provision the user and roles. The request can directly be created in CUP by a functionality known as HR triggers however this requires SAP_HR module which is not present in Solman.
So it is not possible to create request directly from solman. User can login to CUP and then can create the request for his login.
Regards,
Shweta

Solution Manager vs Netweaver vs BASIS

Hi Everybody.
I have 5 year of experience with Java and J2EE Technologies and now my current company want me to join BASIS team. Is this the right move for me to go?
My first question is where to start to learn BASIS. reading material and so.
Then what is the relation between Solution Manager vs Netweaver vs BASIS.
and what are under my responsibility.
In my company SAP ECC6 is implementing and schedule to be complete in July 2008.

https://www.sdn.sap.com isthe best source to learn where you can relay.
Also u can learn on the link of ur companies sapmarket place weblink.
Thanks
Navanath Dhavale

Solution Manager Installation Error "SAP SOLUTION MANAGER 7.0 EHP 1"

I am new to SAP and currently trying to install SOLMAN 7.0 EHP 1 on Windows Server 2008 R2. I have read the documentation also. For JDK I have used "j2sdkfb-1_4_2_24-rev-b06-windows-amd64.exe" which looks to be working fine.
The installation process runs fine until it hits "Start Instance" the message on the bottom says "Starting instance xxx/DVEBMGSOO" (where xxx is my sid) and then its times out after 10 minute. After timing out I get the following error on the window.
An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance ORC/DVEBMGS00 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
Though the installation steps are not fully completed but I do see SAP management Console and when I open it I see two process running "msg_server.exe" & "igswd.exe" The process dispwork.EXE starts in the beginning and then stops and stays stopped. I tried restarting all the process again but only tow of them starts and the process "dispwork.EXE" starts but then stops again. I also did a NEW installation considering a file could have been corrupted or something else but the installation process stops and the same place. I am sure ppl have installed SOLMAN on windows 2008 R2 and this error seems common to me. Please assist. Any tips would be nice.
Edited by: amirsd on Aug 3, 2011 5:53 PM

Hi,
Please check the below
1) ip/host entries should be in /etc/hosts
2) patch the latest kernel for 2008 R2
and re run installation
Regards,
Ram

Installing SLD in Solution Manager 3.2

Please tell me the Step by Step procedure to configure SLD (System Landscape Directory) in solution manager 3.2, I have installed solution Manager 3.2, in that it ask to enter SLD, i have filled the contains but i don't know to activate it and the procedure to configure it. It is urgent
Thanking you
Satinder Pal Singh Lamba

Hello George,
The best possible thing for you now ( assuming that everything was working absolutely fine before the upgrade and that you now continue to have no issues with raising tickets in other satellite systems ) would be to find out the side effects of the SP applied..... or may be look for notes resembling your problem.....
SAP Marketplace is one the one you must look upto.....In the meanwhile just raise an OSS for the same..
Inspire ppl by rewarding..
Regards,
Anand.....

Install guide for solution manager 7.1

HI,
i want to install solution manager 7.1 in linux system
and i not find in SDN the install guide
did you now where i can find it?
best regards
Naor Shalom

The installation guides are not available on the SDN but at
http://service.sap.com/instguides
Markus

Solution Manager to Monitor SAP NetWeaver Portal

Hi ,
I have setup Solution Manager 4.0 SP11 and I have a production EP.
I want to monitor the EP using Solution Manager. The monitoring would check if the portal is down and if it is down, the Solution Manager would send a email to the Portal Administrator.
In order to achieve the above monitoring setup, do I need to install Solution Manager Diagnostics?
I do hope to hear from you soon.
Thanks.
Regards,
Mike Lee

Hi Mike,
Yes. You need to setup diagnostics.
All documents related diagnostics are available at:
http://service.sap.com/solutionmanager
->SAP Solution Manager in Detail ->End-to-End Root Cause Analysis->Media Library
Also look these:
http://service.sap.com/diagnostics
https://websmp109.sap-ag.de/operationsnw70
Supportability->Supportability with SAP Solution Manager 4.0
->Root Cause Analysis Installation and Upgrade Guide SP15
Please read my reply of this thread:
https://forums.sdn.sap.com/click.jspa?searchID=25523268&messageID=7426769
Let me know if need more details.
Regards,
Sanjai

Solution manager, SLD and SAP MC

Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
Shaiikil

We can stop, start SAP services from NWA. Now we cannot say Netweaver, NWA and MMC are similar...
MMC is a tool/enviroment provided by microsoft for starting stopping services, managing user rights, security settings, policies and so on...
this can never be compared with SAP Environment for similarities.
Feel free to revert back.
-=-Ragu

Accessing Solution Manager CHARM Via SAP CRM

Hi
Is it possible to accces charm of soultion manager via SAP CRM
If so how does it work and documentation are welcomed
Thanks in advance
R-K

option 1
> customise sap crm to cater for the external product in terms of what solution manager charm / service is currently doing for sap componet
. Create all the status for this products eg: transport is in Dev for product A, Transprot is in QA for product A or product is in Prod then test and close the call
> access solution manager from crm (NB: work center / service desk can be accessed through crm) the problem is WE NOT SURE OF CHARM
> also customise crm to cater for IT related issues like broken laptop or netowrk cable not working or IT related query,
Option 2
> intergrate the external product to solution manager o
> Customise CHARM / service desk to cater for this external product in solution manager the way it does for sap components / ibase

How to configure solution manager service desk knowledge base for customer?

Hi Expert,
How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Please advice,
Thanks
regards,
ng chong chuan

>
Chong Chuan Ng wrote:
> How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
>
> Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Hi,
It's a good idea, but currently it's not yet supported.
In Work Center, there is no predefined (nor a hidden) link shipped by SAP to access the Solution Database for key users.
With a future EhP for Solution Manager, you might get an integration of the Solution Database into the message processing Web UI.
Best regards,
Ruediger

We have SAP CUA on Solution manager 4.0

Hi,
We have SAP CUA on solution manager 4.0,SAP BASIS component 700. Do you know what is the latest Support pack and version for solution manager and what is netweaver identity management.Which one is better for CUA environment
Thanks and Regards
Yakoob.

Hi,
Netweaver Identity Management (IdM) should replace SAP Central user administration (CUA) somewhere in the future. As far as I know SAP still supports CUA but doesn't develop further enhancements for it, because they see IDM as the new product. So when you still want to work with CUA then you can create a new one on your new SolMan and you have to move the administration to this one.
Regards, Basti

Installing License in Solution Manager 4.0 - SAP BASIS 7.0

Similar Messages

Maybe you are looking for