Installing License on CSM 4.3

Hi Everyone,
I am installing CSM 4.3 on new Server.
During installation it asking for License Location.
I have only 2 CDs that came with CSM.
Where should i look for license of CSM 4.3?
Regards
MAhesh

You should have also received a cardboard sheet with the Product Authorization Key (PAK) for your purchase. You need to use the code printed on it and go to http://www.cisco.com/go/license and enter it.
You will then be e-mailed the license file which you save to your server and then direct the setup to the saved file location.
If the PAK has been lost, you can call the TAC (or your reseller) and ask for assistance. In that case, you will need the sales order number for your purchase.

Similar Messages

Terminal server does not have any installed licenses

Good morning! Faced with a some trouble while configuring Terminal Server (Windows Server 2012 based). I selected licensing mode "Per User" and now I see this message:
“The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server “server name” does not have any installed licenses with the following attributes:
Product version: Windows Server 2008 or Windows Server 2008 R2
Licensing mode: Per User
License type: RDS CALs”
So this is trial using of terminal server - I have 25 days yet but already today I can't connect to server using RDP. There is an error message about absent licensing server. How can I activate licenses in trial mode? Thank you for support.

Hi,
Thank you for posting in Windows Server Forum.
From the error description it seems that your issue caused by setting up different Licensing mode. We need to install the proper RDS CAL on the License server. If the license server has installed licenses of the other mode, changing the licensing mode
for the terminal server may also resolve the issue.
To change the Licensing mode we can use RD Licensing diagnoser or by PowerShell command.
To change the licensing mode on RDSH/RDVH:
$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.ChangeMode(value) - Value can be 2 - per Device, 4 - Per user
Please refer below article for information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Have you installed License server on Server 2012 and you have RDS CAL of Server 2008 R2?
If that’s the case then first you need to purchase the RDS CAL for server 2012 and then you can configure on server 2012 because server 2012\R2 RDS CAL can work with lower version OS but Server 2008 R2 RDS CAL can’t work on Server 2012\R2.
Please check computability matrix.
RDS and TS CAL Interoperability Matrix
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

How many large install licenses required for a 5.x deployment?

I have been trying to determine the correct license requirement for a 5.x install. There will be 1 primary server and six secondary servers. It is very clear that I need the base license for each ACS instance, but the documentation notes that for greater than 500 devices (IPs) that a large install license is needed for each ACS deployment. Does this mean that each ACS appliance instance will require a unique Large Install license or I only need one license (presumably installed on primary) and that will cover the IP requirements for all my secondaries?

On a single license is required for a deployment.
The large install license is installed on the primary and gets replicated to all the secondaries in the deployment that are connected to that primary

If I have already installed MS Office 2011 and have no more install license agreements and I install Lion will I have to purchase office again to reinstall?

If I have MS Office 2011 with no more install license agreements and I upgrade to Lion will I have to purchase new install copies of Office?

I didn't have to. Office '11 kept on working with no problems after I installed Lion.

How to install license for expired SAP J2EE engine?

Hi,
I had used evaluation copy of the SAP J2EE engine. This copy works for few days and now the SAP J2EE engine is stopped. After its expiration, we purchased the permanent license.
My question is: <b>how to install license for the expired SAP J2EE engine so that the engine can be started without re-installation?</b>
Waiting for the reply.
regards,
Anand

Dear Anand ,
To install license of the J2EE Engine :
In the Visual Administrator -> Server 0 -> Services -> Licensing Adapter. Then choose tab page Runtime -> Installed Licenses and Install subsequent temporary license.
check the URL for further details :
http://help.sap.com/saphelp_nw70/helpdata/en/14/5e533e5ff4d064e10000000a114084/frameset.htm
Hope this will help you resolve issue .
Regards ,
Santosh

Can't Request or Install License

I'm trying to install WebTools from scratch, but I keep getting this error when I click the Request or Install License button on the first page that loads up. What could be causing this and how do I fix it? I'm running PL 4 on the WebTools.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
   netpoint.LicenseRequest.Page_Load(Object sender, EventArgs e) +233
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +43
   System.Web.UI.Control.OnLoad(EventArgs e) +98
   System.Web.UI.Control.LoadRecursive() +71
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4310

Hi Derek,
I have taken another look at this...very confusing.
I saw two things that could possibly cause this.
More likely:
There is an existing license on your machine that contains invalid data and is causing the error.
This license would be either in the bin directory of your WT install or in "isolated storage".
To test this, see if you have a license in the bin directory of your WT install (this should be the file that has the format <MachineName>.lic).
Rename the file to .licold, or something. Or move it to your desktop.
Next, try to get another license.
If this fails, the next thing would be to find where isolated storage is on your machine. Perhaps just a search for <machinename>.lic will do. Isolated storage is usually some bizarre folder name like IE temp folders. You can look it up on the MSDN if you need more info.
Anywayyou need to try the same testif the bin test failed.
Wild stab #2:
WT can not read the registry.
Unless you did some monkey business with permissions, this is not likely.

Error when installing license key

Hello,
I use Interactive form for Adobe and I have credential file saved in the correct directory.
In the Visual Administrator, when I want to install the license key : I have the message :
"The password entered does not match the credential chosen. Please enter the password for the chosen credential".
I have a pfx file and I choose : P12 Record / ReaderRights /
Thanks in advance for your help.
Daniel.

Hi Trevor,
I stuck at same problem. I finished install Solution Manager 4 but after install license received from SAP i got error (1) so I edit text file like you did and got error (2).
After send this error to SAP, They told me that I have to install the latest version of Sapcryptolib as descript in sap note no. 662340 (SSF Encryption Using the SAPCryptolib). But it still dont work.
Do you found any method to resolve problem?
my e-mail: [email protected]

How to view pre-installed License file

Hi,
I was told we that 6296 comes with pre-installed 18-port license but I could find any.
There is nothing under installed license. All I can find is 180 days grace period.
Is pre-installed 18-port license viewable via license management?
Thanks,
Harry

Hi,
No, you cannot view your default license. you can only view additional license as well the grace license (180 days).
you can configure the port normally and the base license should cover up until the certain port number, before start using the grace license.
And the additional Modular also give you another base port license (another 8 port if I'm not mistaken), but you can use it in any port, not only on the module. when you unplug the module, the license is removed, and if the port is greater than the licensed, it will go to the grace license.
Hope it helped.
Thanks,
Pieter

How to install license ?

hi,
sap default license have one-month time limit, how to install license on my nw7 bi system, plz give me step-by-step installation guide.
thanks.

Hi,
Take a look.
http://help.sap.com/saphelp_nw04/helpdata/EN/c9/eb8438e1b42e3ce10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/a7/512c88407a11d1893b0000e8323c4f/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/bf/85cc78dad811d3ace80000e83539c3/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb493f34-0801-0010-a3bc-ce2821492490
Regards.

Biztalk Adapter Pack Eval license uninstall, install licensed version.

I need to know the proper way to uninstall the eval Biztalk Adapter pack and install the licensed version.
Is it just uninstall the current version and install the new one?

Refer: How
to upgrade trial version of BizTalk Adapter Pack 2.0 to the licensed version
Steps are:
Stop BizTalk services and SSO Service
Take Backup of the BizTalk databases
Stop SQL server agent
Uninstall Evaluation version of BizTalk Adapter Pack (This clears all registry entries from the environment)
Uninstall WCF LOB Adapter SDK
Install WCF LOB Adapter SDK
Install Licensed version of the BizTalk Adapter Pack
Start BizTalk services and SSO Service
Start SQL server agent
Regards,
Rachit

Upgrading ASA licenses on CSM

Hi is there anyone who knows how to upgrade an ASA license (the Security Plus License) using CSM 7.0?

CSM does not manage device licenses, so you cannot do it in CSM.
What you can do is use a FlexConfig to push the command "activation-key xxxx" from CSM, or use CLI to do it. It will not cause CSM problems because CSM will not see it in the config since it is not stored in there anyway.
I hope it helps.
PK

Where do you install license in portal EP6 SP4

Where do you install license in portal EP6 SP4. I don't see the <b>Portal Licensing</b> under System Administration->System Configuration.

i solved it my own. The license is now installed via visual administrator of j2ee.

Sourcefire - How can I look up all installed licenses from a Defense Center

I need to know how I can lookup all installed licenses from a Defense Center.

Hi Merv,
Please find the steps in the recording.
Streaming recording link:
https://cisco.webex.com/cisco/ldr.php?RCID=314b3eef8b9ee7be3039f73ff844d04d
Download recording link:
https://cisco.webex.com/cisco/lsr.php?RCID=3a66d50b27425e7ea51ac0754e210902

Installing/Licensing CC apps

I am considering purchasing CC apps through our Volume license account
Do users have to have their own ID to install/license the products or does it have to be done through the Volume license account?
I would not really want users to have access to the company ID/password
Thanks in advance for any help
NJW

Hi Thompson ,
Once you buy the CC apps as in Creative Cloud for Teams , You will have to first send the invites to the users so that they could be added into the accounts and have an active membership under there name . To be added into the accounts, they can use there own Email add and create Adobe id's for themselves .
They would not have to use the Company Id or your ID . Your Team members or the end user's can simply access the Creative Cloud membeship using there own Adobe Id's.
Regards,
Kartikay Sharma

Installing license for solution manager in DS (user/PW : sap*/pass)

Dear Experts,
I need to install license for the solution manager in the Discovery system 3.
I made 3 mistakes while logging in, so, the user/PW : sap*/pass can't logon to the system.
Can you please help me find how to log on to the client 001 of the solution manager when the user: sap* and PW : pass is unable to log on?
Thanks
Regards,
Sudeep

Hi Sudeep,
As per the Quick guide for V3, to login to Solman Client 001, the user /pw - : sap*/admin123
Since the sap* is locked, login with admin/admin in client 001 and unlock the required user account.
R,
Chaitra

Installing License on CSM 4.3

Similar Messages

Maybe you are looking for