Installing lightroom 3.6 on a mac...help please
I can not find the actual download. I seen it in my downloads but it just keeps installing but never actually opens. I had this issue with the trial too. I am so annoyed right now you have no idea!!!
Hi,
Are you able to view Lightroom in your applications list?
What happens when you click on it and try to open the application?
After downloading, do you remember seeing the installation screen asking you for the serial number number and confirming that installation has been successful.
Thanks
Similar Messages
-
After I loaded Mac OS lion, it won't let me install my Sierra Wireless telstra. It keeps telling me to install it even though i already have. help please?
Check for new 64 bit software for the modem, other wise you I'll probably have to boot your Mac in 32 bit mode first.. And then every time you want to go online.
I have the Sierra wireless 306 and have their 64 bit lion software installed. Works well.
Best. -
Just bought a new macbook pro. i need to transfer information from my old mac. help please?
just bought a new macbook pro. i need to transfer information from my old mac. help please?
Hi,
See Here
Transfer from Old to New
http://web.me.com/pondini/AppleTips/Setup.html -
Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!
Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist. Verify that you have access to that directory.Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist. Verify that you have access to that directory.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Vista instructions in the following document: Check your hard disk for errors
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
i bought a iphone 3gs off a family member and its on o2 i activated the o2 sim in a bb because o2 support advised me to activate on different phone as mine will not sync it says sim is not installed to iphone on itunes can anyone help please ...?
cheers for the reply mate yeah she said that its locked to o2 so i done all i mentioned above also spoke to a o2 advisor and he didnt have a clue its stupid i have searched the internet for this problem and cant find a thing i cant be the only person to have it happen lmao its well annoying and stupid if you ask me nothing is simple these days ow well guess i will have to go to the apple store
thanks again mate appriciate it -
HT1222 Can't install- box greyed out? Can anyone help, please?
Can't install- box greyed out? Can anyone help, please?
Well, I don't understand this any more than when I posted, but it seems that it's the Animation codec that is the culprit. If I export using DV, there's no problem conforming to 24. Anyone have any ideas why that might be the case?
-
I installed Adobe Flash Player 13 - all I get now is "Plug-in Failure" - tried to uninstall fresh install reinstall and still "Plug-in Failure" HELP PLEASE ?
The currently available Flash v13 is broken, see this thread:
https://discussions.apple.com/thread/6074079?tstart=0
Run the uninstaller as explained above and download an older version:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html -
Is it possible to install Lightroom 2.0 onto a Mac Book Pro running 10.8.5?
I have a disc for LR 2.0 and I am trying to install it onto my Mac Book Pro running 10.8.5. I have tried three times and the installation has failed with a message saying contact the manufacturer.
I have managed to install Lightroom 1.0 from disc and it opens but will not allow me to create a new catalogue.
Is this just a compatibility fail?Try installing 2.7 from here: Adobe - Lightroom : For Macintosh Historically, installing a download has often worked better than installing from CD.
Hal -
hello. I had Lightroom 5 on my old Mac Pro. Worked great. The Mac PRo died. I bought a new Mac Pro and am trying to re-load Lightroom but it won't accept my Serial number. Please help. Thanks.
You can look here
Adobe - Lightroom : For Macintosh -
I have installed Lightroom 5.6 as an upgrade but am unable to proceed because it wants a serial number; how do I attain the needed serial number?
No, I did not have to purchase the upgrade. But here is what I believe my
error was: earlier today, I upgraded to LR 5.6 on my laptop. Then I
upgraded to the same on my desktop, but became confused and installed it
TWICE.
Is this the reason that Adobe is asking me to license Lightroom and to come
up with a serial number? (I have my serial # from LR4, but it does not do.)
Should I try to deactivate LR 5 and then try again to upgrade to it?
Or am I still confused and need to purchase the LR 5.6 upgrade? Thanks for
your help.
On Thu, Aug 21, 2014 at 5:44 PM, John Waller <[email protected]> -
How to install Lightroom (purchased) on another laptop (mac)?
Hello, I have already purchased and installed Lightroom on another pc.
now I have switched to a Mac, how can I continue with Lightroom ?Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh -
Photoshop Elements 6 on Mac help please !!!!!
Hi there,
I need help please !!!!!
I have PSE 6 for my imac and bought myself a NIKON D60 so far so good. I have installed PSE 6 which comes with ADOBE Bridge CS3
I have bought a book as well as I am new to photoshop and in fact DSLR cameras.
I have got my photos into Bridge OK by the way they are JPEG format. According to the book I can open the JPEG in camera RAW by either selecting the JPEG and then pressing cmd+R or by selecting the JPEG and select open with and camera RAW should be available to selct.
I cannot get of the options to work any ideas please
Secondly I have taken some photos in RAW format and put then into Bridge again I cannot get the camera RAW interface to open with these neff images.
If I try to open the image PSE 6 opens and gives me an error that the file format is not supported by PSE 6
Am I missing something here as I have been trying for a week now !!!!!
Sorry if this comes across a stupid question but it is new to me
Chris UKThere's no "theory" about it. You should be able to open a raw file from bridge by double-clicking it, but it will open in ACR in PSE. You can't just use ACR within bridge in PSE, if that's what you're trying to do. To open a JPEG in ACR, go to file>Open in PSE and choose Camera raw as the format after you select the file but before you click Open.
If you've correctly updated ACR, bridge should show you thumbnails of your raw files. If it doesn't try emptying the Bridge cache. -
Cannot publish from iWeb to .Mac, Help please!
I am trying to publish to my site from here in Australia. I was able to publish in the country at the beggining of the trip, but can not now. I get the message "Publish Error - an error occurred while publishing file /Web/Site/iWeb/Site/Blog". I had updated two blog entries and changed the date on an entry. Since then in trying to fix the issue I deleted both of those entries. I have been through .mac support troubleshooting steps to ensure it is not a network error. I have been able to publish to a folder, but when I try to copy the Blog folder from that folder to my iDisk I get "The Finder cannont complete the operation because some data in "" could not be read or written (Error code -36)". Since then they asked that I try to publish from a trial .Mac account or from a new OS X user account on my machine. Both of those attempts failed as well, which they say indicates it's not a .mac account or OS X user set up issue. They asked that I put a copy of my domain file out in the public drive for them to look at, but when I try to do that it goes through and does the copying and then freezes at "Copying Domain.zip to Public, Copied 599.5MB of 599.5MB (Closing file...) - Please wait". Then I get the same error code -36 and am disconnected from iweb. Can anyone out there help please?
Thanks!Thanks and Merry Christmas to you too! I have experienced both modem/network problems and was unable to publish in Tahiti and Cook Islands because of that and now these problems which have nothing to do with network it seems - so yours may or may not be network related. I was able to cheat and copied my "Site" folder from my hard drive to my iDisk rather then publishing. I can't remember if you've tried this or not (read a lot of strings today) but you can publish to a folder and then copy that folder to your iDisk at /Web/Sites/iWeb/Site as "Site" after first renaming the one that is out there now. Let me know if you have any questions on how to do it. It sounds like you are traveling like we are and anxious to communicate with friends and family back home. When you are bored, our site is web.mac.com/baganworldtour.
At least we now have our first update out there in two weeks. But it took almost two hours to copy the folder and this won't work forever. Hopefully we, whether by the discussion room or .mac support next week, will be able to fix the problem for real.
Thanks. Good Luck. Merry Christmas -
I have a Nokia N70 and am trying to update my contacts from my Address Book. I have up-to-date OSX 10.4.10 and iSync 2.4 and the phone is being recognised, so a good start! My problem is that my updated Address Book entries are not being transferred, somehow an old version of my Address Book is being used by iSync.
I've tried restarting the Mac, clearing all contacts from my phone and sync-ing again (repeatedly), but I still get the contacts from the old version of Address Book loaded into the phone.
I'm not a Mac expert, can anyone smarter than me help please?
Thanks for your time.
MacAndy
PS Any tips on useful software for making the N70 otherwise more compatible with music and any other areas would be very welcome.There's an actions folder. It's your hard drive>library>application support>adobe>photoshop elements>8.0>Locale>en_US (this one is different if you aren't in the US)>workflow panels>actions
-
I just need a bit help on how to install 64 bit java, i searched on youtube for it but it came up with many that I don't know much about. Please recommend a video you guys trust or know about. thanks
You can use 3rd party software such as Carbon Copy Cloner or SuperDuper! to create a bootable clone on an external drive.
I use SuperDuper to create a clone. Yes, it's true the Recovery HD will need to be recreated after restoring a clone because neither of these softwares nor Time Machine backup that partition. It's really no big deal. You just reinstall Lion on top of itself after the restore and reapply any Software Updates including the 10.7.1 update. I've done this a few times with no issues.
The Lion Recovery Assistant app creates an external Recovery HD on like a USB thumb drive, but it creates this using the Recovery HD from your Lion install. If the Recovery HD is missing, the app will not create one for you.
EDITED:
Create your bootable clone on an external drive.
Create an external USB thumb drive with the Recovery HD using the Lion Recovery Assistant.
Swap out hard drives.
Boot from the USB Recovery HD thumb drive.
Use Disk Utilities to create a new partition (Macintosh HD), format it with the GUID partition table and Mac OS Extended (Journaled).
While in Disk Utilities, click your hard drive (not the new partition); then click the Restore button.
The Source of your restore is the external clone you created. The Destination is the newly created Macintosh HD partition.
Click the Restore button. The restore will take awhile depending on the size of the clone.
After the restore, boot your system and it should boot into Lion.
Reinstall Lion on top of itself to recreate the Recovery HD at the end of your Lion partition.
Reapply Software Updates including the 10.7.1 update (if you want it).
Hope this helps!
Maybe you are looking for
-
Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?
-
Setting in itunes for sync file size/format
I heard there was a setting in itunes the would allow you to pick a smaller files size/format at the time of syncing to ypour ipod so during the sync the files would be compressed. Is this true. My cd collection is ripped and saved in lossless and i
-
Hi, If i define format string on a view object's date attribute and use this attribute on a gantt chart, I get an error: avax.el.ELException: java.lang.ClassCastException: java.lang.String cannot be cast to java.util.Date at javax.el.BeanELResol
-
Machine part (From the Plant sending )outside for job work
Hi i want to send a machine part present in working location (but not a stock item) outside the plant for job work and that part is excisable material. How can i send this to vendor or is there any procedure for this ,inform me. Regords manju
-
Batch Master Changes reflecting all plant with same Batch
HI, When we are doing any change in Batch Master ( MSC2n ) for one plant like Shelf Life expiry date or Classification data for one plant. its automatically reflect on all plants for same batch. Example: Material : 123456 Batch : 10925 Shelf Life E