Installing Lion on Mid 2007 mac mini

I recently performed a wipe on my system's hard disk. I had a mid 2007 mac mini with OS 10.5.8 installed. After the wipe, the original installation disks do not work and i am wondering how to get my computer running again and eventually upgrade to snow leopard or lion.

What exactly happens when you insert the original install DVD and try an install?
You can order Snow Leopard DVD here:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Once you have Snow Leopard yo use the Mac App Store to update

Similar Messages

Upgrading RAM on Mid 2007 Mac Mini

My mother has a Mid 2007 Mac Mini, with 512MB RAM. In the past year or two, we've noticed its performance has been slowing. How much would upgrading to 1 or 2 GB of RAM help with the speed?

A fair bit, but only if she installed many Dashboard widgets or RAM intensive applications. Better that she leave the machine on overnight in screen saver, not energy saver mode, and make sure her hard disk isn't too full*:
http://www.macmaps.com/diskfull.html
And if then things are still slow, consider upgrading the RAM to the limit allowed by the machine according to specs*:
http://www.macmaps.com/badram.html

Mid-2007 Mac mini and HDMI issues

I have a Mid-2007 Mac Mini with OS X 10.7.3, that, most of the time, will work fine with a DVI->HDMI cable and either of 2 HDMI ports on the TV. The Mini recognizes the display correctly (a Vizio E371VL). The display's native res. is 1080p at 60hz, and the Mini is set to that and looks great. I can switch to lower resolutions and even restart the mini and have the Vizio look and behave correctly.
However, I have an Apple TV (current generation - black brick) hooked up to the other HDMI port on the Vizio. It also looks and acts great.
The problem is when I switch between the inputs on the TV. If I go to the Apple TV (which will be working fine) and then back to the other HDMI input, the Mac mini shows black. The TV does not say "no signal" or indicate any problem. No amount of zapping PRAM, ressetting the SMC or basic restarting helps. In fact, the TV still registers a signal at 1080p. Using Apple Remote Desktop from another Mac (a 2006 Macbook Pro with DVI) shows the Mini is still functioning and still correctly displays the Vizio model and 1080p @ 60hz resolution.
The kicker here is that I can physically disconnect the DVI/HDMI cable from the Mac mini and connect it to the Macbook Pro. The video from the Macbook will pop up immediately. I can switch between the Macbook and Apple TV all day long, switch resolutions, etc. No problem.
Even more bizarre is that this has the effect of "resetting" the Mac mini. If I plug the DVI connector back into the Mini, its video will pop back up. It will work fine as above until the HDMI input is changed again.
Vizio tech support acted as if they'd never heard of Apple, Inc. Useless.
Super frustrating problem.

Opperman,
I went with my gut and got an LG 47LM4600 TV with VGA input in addition to HDMI (seems there are not many--if any--TVs sold with DVI inputs anymore). The 2007 Mac mini is plugged in using my old DVI cable with VGA adaptor. I tested it using the DVI cable with HDMI adaptor, and there was no sound.
I can confirm the same condition that you originally described when I try to switch to the Mac mini on the PC input. The screen is black except for a color bar that flashes on briefly every 2-3 seconds at the bottom of the screen. No amount of switching from one input to the other will make the display come back. The only way I've found to fix it is to unplug the cable from either the TV or the computer and plug it back in.
The annoyance with this is ameliorated by the fact that we'll be using a new Apple TV to watch Netflix from now on, instead of using a Web browser on the mini. Will only have to worry about it when watching DVDs.
Cheers.
Message was edited by: Numenorean

How can I add 2 monitors to a Mid 2007 Mac Mini? Would a usb to dvi adaptor work?

How can I add 2 monitors to a Mid 2007 Mac Mini? Would a usb to dvi adaptor work?

Hi Craig,
I do think that is your best bet/option...
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

How much Ram can I install in a mid 2011 mac mini, 2.3Ghz?

I have a mid 2011 mac mini with a 2.3 Ghz processor and the factory installed 2GB of ram. I would like to increase my ram but I am confused about the amount it can handle. everywhere i look on the internet it says it can handle up to 8GB however i spoke with apple care on the phone and they said it can handle up to 16GB. So which is it?
thank you for your help.

Click here.
(115066)

Mid 2007 Mac mini (2,1) with optibay, boot from raid 0?

I've just got an optibay, which I've installed, and now have two 7200rpm 500GB hard drives inside my 2007 mac mini. I've set it up as raid 0, and have cloned my original boot volume back to it, but when I start up the mini I get a stop symbol instead of the apple symbol.
According to this article, some macs don't support Raid booting, but my mini isn't listed amongst them:
http://support.apple.com/kb/TA24104?viewlocale=en_US
Anyone else doing something even vaguely similar to this?
Message was edited by: papalozarou

Which Tiger Install DVD do you have...?
1. I think that, that model originally came with 10.4.10 and so you will need either the original 10.4.10 install disc or a later retail (Leopard or Snow Leopard) upgrade DVD.
2. In addition, a new (HDD, Hybrid Drive or SSD) must first be Partitioned GUID Partition Table and Formatted Mac OS Extended (Journaled) before OS X can be installed.

Has anyone installed Lion on mid-2007 MacBook?

I have a mid-2007 MacBook that I have not yet installed Lion on. Has anyone installed it on a similar MacBook? If so, how does it run?
I have a brand new MacBook Pro running Lion, so I am familar with it. I am just curious if it will be really slow on the MacBook.
Thanks.
Thom

I think it depends on what you need to do with the computer. I have a 2007 black macbook with 4gb ram. Most stuff works ok, although everything is noticeably slower. But some stuff, Aperture in particular, barely work at all - aperture is almost unuseably slow. So be forewarned! And please, don't believe anyone who says it'll run just as well as snow leopard - it doesn't.

HT1237 Where can I get firmware updates for a Mid 2007 Mac mini (Macmini2,1)?

The model for some reason is taken off of the firmware update support page. I found an archive of the page from 2011 and there seems to have been an update. My current SMC Version is 1.19f2 and the update was 1.3f4 but the strange thing is that when I follow the link to download it forwards me to the late 2009 model page. Any help would be appreciated. I'd look across the internet but I'm not comfortable download firmware upgrades from a 3rd party site.
Much thanks
Edit: I found that the mid 2007, late 2006 and early 2006 use the same SMC firmware and realized that both the link from the archived page and the link for the late 2006 model on apple's page all linked to the early 2006 firmware update. I'm going to try it. If you want me to update with results reply, otherwise consider this dead...

Good moves methinks, & it is strange how they list it, here's my 2007 iMac...
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4
Here's my 2005 G5...
Boot ROM Version: 5.2.7f1
So it appears it probably is nineteen!

Should i upgrade 2007 mac mini from leopard to lion?

I have a mid-2007 mac mini and would install the two 2G ram cards, but I'm not sure that the newer os would significantly improve things. Many posts suggest that it may be slower. Any thoughts?

The poster said "I never installed Rosetta with my Snow Leopard upgrade, " thus he does not have any software to replace
Eustace Mendis wrote:
It will be more than $100 if you have to replace incompatible software following the OS upgrade. Power pc apps do not run in OS 10.7.

2007 Mac Mini Dropping WIFI constantly

Hello,
I have a mid-2007 Mac Mini with Snow Leopard installed, and it's located in a room about 20 feet away from the access point. The connection to the room has never been that great for the Mini, but my iPhone 4S for example has no problem connecting to the WIFI. (The Mini seems to be really sensitive, but it does have good days as well where I get full bars). It's been on and off like this for over a year.
The problem only started a couple days ago, where it cannot connect to the home network at all. When I put the password in, it instantly says "connection timeout". Or it will load to Google.com, but if I try to browse to anything else, it stops, the connection drops.
It was working perfectly fine one afternoon and when I got back, it can't connect to it at all. I've never seen it struggle this much before, to simply connect to WIFI. I've had the computer for 5 years. Every computer, and phone connects perfectly fine to the network. I even tried moving the Mac Mini to a room where the router is just below, and it picked it up fine, so I don't think it's a hardware issue.
What can I do to fix this?

The App Store catalogs several free or low cost network analysis apps that might help identify low signal to noise, interfering networks, and available clear channels that might do wonders toward improved reliability. Depending on whether or not the router that is creating the network will support another device "extending" the network if all else fails an Airport Express either in the room with your mini or perhaps in an intervening room might help.

SSD Drive schedules for 2007 Mac Mini @ GHz Core 2 Duo

I have put a 240 Gig Crucial SSD in this computer and there was a very prominent bump in usability ie no pageouts .
I have a 480 Gig SanDisk Extreme II and was wondering how sensible it would be to put it into the Mac Mini . SanDisk has a limited viability schedule posted . I thought SanDisk would have a bit better prepared catalog to view these particulars , and I thought wrong .
Any expertise here would be appreciated to limit my fooling around with the Mac Mini , I had to go back and forth a bit to get stuff I overlooked .
Thanks in advance ! FRP

   In observing the present compatability of the Mid 2007 Mac Mini Intel carrying a Serial ATA (1.5 Gb/s limit , divining just what inhibitions the speedier quality of those routine functions may be prohibited from employing a 6Gb/s SSD over a standard Disk Drive is less straightforward than an ordinary binary matter might , or might not be .
   Having made the observations subsequent to my request for suggestions supporting what an experienced hand might venture I am very satisfied regarding the related efforts here .
   There may be some grist for the thought mill here though . There may be enough to offer some amusement in distinguishing between a computers harddrive , and external accessories USB 2 , Firewire , etc .
   The $14 USB 2 caddy I thought was going to carry the old disk drive to be the backup for the new 240 GB Crucial SSD . I did not pay attention to details concerning performance as I trusted the Crucial site's advice , and only worried about prying open the old Mini . The SSD drive worked so well that I went to Microcenter to purchase another drive for the caddy . That is where I discovered that the Crucial worked as a SSD hard drive , but was useless as an external device on the "old" Mac Mini . Returning the original Disk drive to the Mini made it apparent when the MacBook Pro was able to read the caddied Crucial SSD , and the old Mini wasn't .
   I now have the Crucial in the caddy , the SanDisk in the Mini . A pretty good extentsion of the Mac Mini's usefulness , the pageouts are unmissed . The Crucial will reside within the Mac Book Pro giving both computer and spousal college curriculum Window dependent papers a boost as well .
    I don't know why the SSD is working well in the Mini but fails as a external drive , but that is fine . I would have liked to have put all the Mini's CPU's on SSD .

Install Windows 7 on a Mid 2010 Mac mini using USB or SD media?

Is is possible to install Windows 7 on a Mid 2010 Mac mini using USB or SD media? I have not figured this out. Here's what I have observed:
I can install OS X Lion using USB or SD media. Both are detected in the boot menu, and will boot.
An SD card with Windows 7 installation files formatted MBR/FAT32 using diskpart appears (with an SD card icon) in the boot menu but when selected as a boot device, the boot fails and the existing OS X instance on the Macintosh HD starts. A USB stick formatted as described does not appear in th boot menu at all.
An SD card or a USB stick formatted as described will boot on a Mid 2011 MacBook Air, and can be used to install Windows 7.
Is this due to EFI differences between a Mid 2010 Mac mini and a Mid 2011 MacBook Air?
Thanks.

The Mac Mini Mid 2010 has a DVD player built in, you can startup and install from a Windows 7 DVD. The Mac Mini Mid 2011 does not have a DVD player built in. I am happy that in new computers I can make use of an USB-stick to install Windows 7. Windows 7 uses MBR and Mac OS X uses EFI and that is why it was not possible on a Mac Mini Mid 2010. I think the EFI on a Mac Mini Mid 2011 is different.
I should like a firmware update on my Mac Mini Mid 2010 if possible. In that case I could choose between DVD or USB stick if I want to install Windows 7.
I also have a FireWire CF Card Reader. I think it is not possible to install Windows 7 via FireWire too.
I do have an external USB HD with 2 partitions: Mac OS X 10.6.8 and Windows 7, but is is not possible to start up Windows 7 from the external HD. It is possible to start up Mac OS X 10.6.8 from the external HD on a Mac Mini Mid 2010.

Audio issues on Mid-2010 Mac mini upgraded to Lion

I'm using a Mid-2010 Mac mini that came with Snow Leopard but I recently upgraded it to Lion. Every app works pretty well except for audio playback. Whenever I play a game or play a movie, audio stutters every 8 to 10 seconds for like a sec and it comes back in. Video keeps playing fine. It's pretty annoying since I can't properly play games or watch movies anymore. The rest of my apps are working very well except for Boxer which seems to have taken a performance hit.
Currently, the hardware hasn't been upgraded in any other way - meaning it still has the original 2 GB RAM memory. It's connected to my HDTV via HDMI. It didn't manifest this issue until the upgrade to Lion.
I've tried closing every app but it doesn't seem to help. Hope you can help me out. Thanks!!

You need a newer model Mac to use AirDrop between an iOS device (e.g. iPad) and a Mac
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

Can I install SL Server on Mid 2010 Mac mini ?

Hi
Can I install SL server or Lion Server on my mac mini (mid 2010 ,2Gb,320GB,C2D 2,4ghz) ?
thx

Either will work, but get more RAM.

Help: Install Snow Leopard Server 10.6.0 on Mid-2010 Mac Mini, then update?

I just purchased a Mid-2010 Mac Mini with Snow Leopard Client 10.6.3 (the new ones just released) with the idea of installing my copy of Snow Leopard Client on it and using it as both a network server and media server.
I own Snow Leopard Server 10.6.0 (the initial DVD release) and was thinking I could do a fresh install and update to 10.6.4 on the Mini without problem, but that didn't work. I also tried doing a Target Disk Install to the Mini using my MacbookPro, but the installer choked at the Machine Checksum saying MBPs weren't supported to run the installer.
So, that blows both of my previously known installation options. I was wondering if anyone else with the new Mini and Snow Leopard Server had any suggestions on how to get my current version of Snow Leopard Server (10.6.0) installed on the Mini and then run system updates to get it to boot properly.
Thanks

Allan Eckert wrote:
Hi GrainFocuser;
Your copy of SL Server version is probably too old to install on the new Mac Mini. It probably doesn't have all of the correct drivers for the newer hardware.
You might have better success with your alternatives if you post over on the server forum instead of here.
Allan
Message was edited by: Allan Eckert
Allan, thanks.
It is pretty clear that my installation disk is too old, hence looking for options and suggestions.
In years past with previous versions of Server, there was a way to install an outdated install disk (a point release or 3 behind) and then run the necessary installation updates...either through target disk mode or on to a separate boot disc.
So, with my 10.6.0 Server Install disc, I am not able to do so in either scenario because a) My other admin machine is a MB Pro and the installer performs a hardware checksome preventing install...so no Target Disk Mode, and B) Install on other disc from mini, again Hardware checksome since hardware not recognized.
I am looking at options to enable an install with my disk short of having to physically walk into Apple (a huge trek) and get a new install disk or ask Apple Support to mail one.
So, again... Any options from OS X Server Admins out there?

Installing Lion on Mid 2007 mac mini

Similar Messages

Maybe you are looking for