Installing LK45_web.exe

After exporting a web page to a web server, the pages run correctly IF the client system has Lookout installed. If Lookout is not installed, I need additional software. The pages contain a link to ftp the file LK45_web.exe from National Instruments.
First,the link is bad or expired.
Second, I found the file and downloaded it, but can't do anything with it. It is not a windows file. The accompanying text file implies an installer is reguired.
How do I get this to run?
Bob L

Hi Bob,
I was able to download the lk45_web.exe from the following FTP site:
ftp://ftp.ni.com/support/lookout/webclient/4.5/
Then, I just ran it which in turn launched the installer. May be the file got corrupted when you downloaded and want to try again.
Thought this info' would be useful...
Regards,
Khalid

Similar Messages

Unable to install xacf.exe

Hello experts,
I am trying to install xacf.exe however getting an error without message and after clicking on ok installation gets stopped. I have already installed adobe livecycle designer ES2. Please advice do i need to uninstall it and install xacf.exe first?
Thanks

Have you checked http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html
I guess the problem is that the installer runs on a 32 bit JDK which is not the default on your machine. You can try the jar installer.
Timo

Unable to install any EXE error 0xc0000135

I have a client with a messed up SBS 2011. I am trying to determine if it can be fixed or needs to be rebuilt. It started with failed ShadowProtect alerts. I found I could not repair it and had to manually remove it per Storagecrafts instructions. A reinstall
alerted me to the EXE error 0xc0000135. I found I could not install any EXE files. I have scanned for viruses and did not find any.
Any ideas?
Thanks

Hi,
I agree with Al. The most common cause for 0xc0000135 error may be the .NET Framework. Did you install .Net Framework? Or please use following tool to check the integrity
of the .NET Framework.
.NET Framework Setup Verification Tool User's Guide
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx
By the way, please run
sfc /scannow command to scan all protected system files, and also use
SBS BPA. Any find?
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Install vstf_testagent.exe and vstf_testcontroller.exe on remote machine and configure

Hi,
I am creating a form application where I want to install vstf_testagent.exe and vstf_testcontroller.exe on remote machine and configure it. I copied the files to the remote machine local directory, wanted to know how to install exe on remote machine and
configure it. could some one help me with code.
Thanks
Thanks,

Hi sayedfarhan,
Thank you for posting in MSDN forum.
>>I am creating a form application where I want to install vstf_testagent.exe and vstf_testcontroller.exe on remote machine and configure it.
According to your issue, as you said that you want to install vstf_testagent.exe and vstf_testcontroller.exe on remote machine and configure it.
So please you refer the following MSDN document to install and configure the test agent and test controller on this remote machine.
https://msdn.microsoft.com/en-us/library/dd648127.aspx?f=255&MSPPError=-2147217396
Generally, I know that we used this test controller and test agent to run automated tests on remote machine. Note:I know that if you want to install and configure test agent and test controller for automated test, it will not need to any code for
it.
So whether your issue is related to run your automated tests remotely with the test agent and test controller.
In addition, as you said that:
>>I am creating a form application where I want to install vstf_testagent.exe and vstf_testcontroller.exe on remote machine and configure it.
Could you please tell me whether you want to install and configure the test controller and test agent for your form app?
If I misunderstanding your issue, please tell me more detailed message about your issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to install "vcredist_x64.exe"

Team, My attempted installation of Autodesk Revit is erroring-out because I am unable to install one of the prerequisites, "Microsoft Visual C++ 2008 SP1 Redistributable (x64)" (vcredist_x64.exe). I get error 1603:
Installing Microsoft Visual C++ 2008 SP1 Redistributable (x64): "C:\Autodesk\WI\Autodesk Building Design Suite Ultimate 2016\3rdParty\x64\VCRedist\2008SP1\vcredist_x64.exe" /q
2015/4/26:20:25:58 mfimb_000 MARIA Install Microsoft Visual C++ 2008 SP1 Redistributable (x64) Failed Installation aborted, Result=1603
I am running Windows 8.1 (64-bit, x64) on a Dell laptop with 16GB of RAM and 500 GB free on disk.
As a workaround, I attempted to install vcredist_x64.exe directly from the support.microsoft.com website, but this generates a different error:
"Failed to install vcredist_x64.exe Error 997.Overlapped I/O operation is in progress"
I have anti-virus turned off, and I have turned off auto-backup software. I also went into Programs and Features and uninstalled "Microsoft Visual C++ 2008 SP1 Redistributable" and "Microsoft Visual C++ 2005 SP1 Redistributable".
Any thoughts will be greatly appreciated.
-Eric

Hello Eric Stevens,
Error 1603 is a gereral error which is hard for others to troubleshoot, this error is the same accross some products, for example, you can see this .NET Setup blog about 1603:http://blogs.msdn.com/b/astebner/archive/2005/08/01/446328.aspx
So I cannot find the reason of 1603 but I know the error related to 997 you showed above, please see this blog:
http://blogs.msdn.com/b/vsnetsetup/archive/2014/10/27/error-997-overlapped-i-o-operation-is-in-progress-kb2918614-breaks-windows-installer-service.aspx
Please follow the troubelshooting steps on the above blog to see if you can find the same error first.
Or I saw some other related blog about this issue
https://support.microsoft.com/en-us/kb/295712
It seems the error does not have a solid answer, if you cannot fix this problem please send your log to OneDrive and share the link back to here for me to check.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to silent install the exe or msi of Flash Player 10.3.181.14 ? Thanks

How to silent install the exe or msi of Flash Player 10.3.181.14 ? Thanks
Everytime the Flash Player update, it always change the silent installation method and there is no related information listed or shown in the following download web site. Please indicate the silent installation method in the following web site.
http://www.adobe.com/products/flashplayer/fp_distribution3.html
PS. For example: Microsoft would shown the silent installation method in patch update web site, please refer to the below URL for reference:
http://www.microsoft.com/technet/security/bulletin/MS11-035.mspx
Update Information --> Security Update Deployment --> Deployment

You may find what you're looking for in http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html

UCCX 7 | Unable to Install TAPS [.exe] File

I am trying to install TAPS [.exe] file on UCCX server downloaded from CUCM, But getting the following popup box error:
"Error opening installation log file.Verify that the specific log file location exist and is writable"
Any help on this ?

Whether this is your issue or not, you really should be running one of the SRs. If you have a strong reason not to, I understand, but if you don't, install at least SR1, and try again. Also, that's not a supported CUCM version. That could be your issue as well.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf

Debugging installed AIR .exe

When running my AIR app in Flex Builder with ADL, my error
messages come through fine and I get an error dialog when something
fatal has happened (that wasn't caught by a try/catch).
However, when I package up and install my AIR app on another
machine, the error messages are now silent, and
flash.system.Capabilities.isDebugger is false.
Is there a simple way to have the installed AIR .exe run with
debugger capabilities, so that error messages are shown in dialog
windows?
Thanks in advance for any help.
Daniel McQuillen

For anybody using the CommandProxy pattern, you can get the
proxy to launch your program through ADL by changing a couple lines
in the CommandProxy.cs file in the LaunchAndRun() method. (There
are cleaner ways to do this but for a quick fix...)
1) change the processPath argument to ADL :
processPath = "adl.exe";
2) change the process startInfo args to the following string
p.StartInfo.Arguments = "myApp-app.xml -- " + authToken + "
" + port;
This worked for me.
Daniel

Not able to install AdventureWorks2008_SR4.exe

I tried installing AdventureWorks2008_SR4.exe from link http://msftdbprodsamples.codeplex.com/releases/view/37109
Its giving me fatal error occurred during installation. Details:
Failed object initialization (ISupportInitialize.EndIt). An exception occurred in SMO while trying to manage a service. Error at object 'DatabaseSelection' in markup file 'DatabaseInstaller;component/databaseselection.xaml' Line 78 Position 3.
Please guide me how to overcome of this problem.

Please see:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6cb7e9d4-ffc4-48ee-a761-f83c12605e3e/sql-server-2008-r2-adventure-works-sample-data-2008-rtmexe-downloaded-from-codeplex-help-me?forum=sqlserversamples

System Update 5.06 won't install: MCSDKSetupRed.exe Process exit code: 1157

Win 7 x64 on Thinkpad W510. Original OS install from 2 years ago with multiple updates. Most recently, System Update 5.05. Manually downloaded and tried to install 5.06. Failed to uninstall old version, so I did a manual uninstall (deleted directories and searched all entries in registry and deleted). Now 5.06 no longer stalls at uninstall of ver 5.05, but fails to complete the install of 5.06 with the log entry
Filename: C:\ProgramData\Lenovo\tvsuinstaller\MCSDKSetupRed.exe
2014-07-05 20:16:57.243   Parameters: /S /qn /V/qn
2014-07-05 20:16:59.558   Process exit code: 1157
2014-07-05 20:16:59.561   -- Run entry --
2014-07-05 20:16:59.561   Run as: Current user
2014-07-05 20:16:59.561   Type: Exec
2014-07-05 20:16:59.561   Filename: C:\ProgramData\Lenovo\tvsuinstaller\UninstallSU.exe
2014-07-05 20:16:59.587   Need to restart Windows? No
2014-07-05 20:16:59.594   Deinitializing Setup.
2014-07-05 20:16:59.606   Log closed.
Solved!
Go to Solution.

Hi,
What follows is guesswork on my part...
That 1157 error code translates to:
One of the library files needed to run this application cannot be found.
On the TVSU 5.06 page (here) under software requrements I see:
Microsoft .NET Framework version 1.1 with Service pack 1 or Microsoft .NET Framework version 2.0 is required for System Update to work Correctly. Use Microsoft Windows Update to ensure that Microsoft .NET Framework 1.1 or 2.0 is installed on your system.
Do you have an appropriate .NET installed?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to install rootsupd.exe on windows server 2003?

hello
i need to update the root certificates. but i can't use "rootsupd.exe", it's only for windows xp...
there doesn't seems to be a similar update for windows server 2003, correct?
how can i solve my problem, do i need to install the certificates manually? if yes, how does this work?
thank you very much!
best regards, jan
regards, jan

"when ich click on "rootsupd.exe" in my windows server 2003 web edition virtual machine (virtualbox), nothing happens - i can't see any actions after clicking that file... and i don't think that behavior is usual...?"
same behavior on windows 7 (x64) workstation - nothing happens after clicking.
maybe i need to extract it, and install the files manually?:
- authroots.sst
- delroots.sst
- roots.sst
- updroots.sst
regards, jan

Photoshop CC can't install ImageReady.exe running

I have tried multiple times to install Photoshop CC. After completing the download, then extracting I get a message:
at 42%
Photoshop CC Install
Please close the following applications to continue:
-ImageReady.exe
Nothing is running. HOW CAN I GET THIS SOFTWARE INSTALLED.
Logged into my administrator account and nothing is running.

Hi visualjmm,
Try to restart the machine or select the option in Task Manager>Processes tab, which says show Processes from all users and then check for this process.
Regards,
Vinay.

Error 0x800713ec: Process returned error: 0x13ec when installing message+.exe on xp machine.

[0C00:0A0C][2015-02-10T11:49:06]i001: Burn v3.7.1224.0, Windows v5.1 (Build 2600: Service Pack 3), path: C:\Documents and Settings\K4MLD.K4MLD-F2F3858A4\My Documents\Downloads\Message+.exe, cmdline: ''
[0C00:0A0C][2015-02-10T11:49:06]i000: Setting string variable 'WixBundleLog' to value 'C:\DOCUME~1\K4MLD~1.K4M\LOCALS~1\Temp\Message+_20150210114906.log'
[0C00:0A0C][2015-02-10T11:49:06]i000: Setting string variable 'WixBundleOriginalSource' to value 'C:\Documents and Settings\K4MLD.K4MLD-F2F3858A4\My Documents\Downloads\Message+.exe'
[0C00:0A0C][2015-02-10T11:49:06]i000: Setting string variable 'WixBundleName' to value 'Message+'
[0C00:0A0C][2015-02-10T11:49:07]i100: Detect begin, 3 packages
[0C00:0A0C][2015-02-10T11:49:07]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full'
[0C00:0A0C][2015-02-10T11:49:07]i000: Trying per-machine extended info for property 'State' for product: {F0C3E5D1-1ADE-321E-8167-68EF0DE699A5}
[0C00:0A0C][2015-02-10T11:49:07]i000: Setting numeric variable 'VCRedistx86' to value 5
[0C00:0A0C][2015-02-10T11:49:07]w120: Detected partially cached package: vcredist_x86.exe, invalid payload: vcredist_x86.exe, reason: 0x80070570
[0C00:0A0C][2015-02-10T11:49:07]i052: Condition 'VCRedistx86<>2' evaluates to true.
[0C00:0A0C][2015-02-10T11:49:07]w120: Detected partially cached package: NetFx45Web, invalid payload: NetFx45Web, reason: 0x80070570
[0C00:0A0C][2015-02-10T11:49:07]i052: Condition 'NETFRAMEWORK45 >= 378389' evaluates to false.
[0C00:0A0C][2015-02-10T11:49:07]i101: Detected package: vcredist_x86.exe, state: Present, cached: Partial
[0C00:0A0C][2015-02-10T11:49:07]i101: Detected package: NetFx45Web, state: Absent, cached: Partial
[0C00:0A0C][2015-02-10T11:49:07]i101: Detected package: VMAApplication, state: Absent, cached: Complete
[0C00:0A0C][2015-02-10T11:49:07]i199: Detect complete, result: 0x0
[0C00:0A0C][2015-02-10T11:49:11]i200: Plan begin, 3 packages, action: Install
[0C00:0A0C][2015-02-10T11:49:11]i052: Condition 'VCRedistx86=2' evaluates to false.
[0C00:0A0C][2015-02-10T11:49:11]w321: Skipping dependency registration on package with no dependency providers: vcredist_x86.exe
[0C00:0A0C][2015-02-10T11:49:11]w321: Skipping dependency registration on package with no dependency providers: NetFx45Web
[0C00:0A0C][2015-02-10T11:49:11]i000: Setting string variable 'NetFx45FullWebLog' to value 'C:\DOCUME~1\K4MLD~1.K4M\LOCALS~1\Temp\Message+_20150210114906_0_NetFx45Web.log'
[0C00:0A0C][2015-02-10T11:49:11]i000: Setting string variable 'WixBundleRollbackLog_VMAApplication' to value 'C:\DOCUME~1\K4MLD~1.K4M\LOCALS~1\Temp\Message+_20150210114906_1_VMAApplication_rollback.log'
[0C00:0A0C][2015-02-10T11:49:11]i000: Setting string variable 'WixBundleLog_VMAApplication' to value 'C:\DOCUME~1\K4MLD~1.K4M\LOCALS~1\Temp\Message+_20150210114906_1_VMAApplication.log'
[0C00:0A0C][2015-02-10T11:49:11]i201: Planned package: vcredist_x86.exe, state: Present, default requested: Absent, ba requested: Absent, execute: None, rollback: None, cache: No, uncache: No, dependency: None
[0C00:0A0C][2015-02-10T11:49:11]i201: Planned package: NetFx45Web, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: None, cache: Yes, uncache: No, dependency: None
[0C00:0A0C][2015-02-10T11:49:11]i201: Planned package: VMAApplication, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall, cache: No, uncache: No, dependency: Register
[0C00:0A0C][2015-02-10T11:49:11]i299: Plan complete, result: 0x0
[0C00:0A0C][2015-02-10T11:49:11]i300: Apply begin
[0CEC:0C1C][2015-02-10T11:49:16]i360: Creating a system restore point.
[0CEC:0C1C][2015-02-10T11:49:32]i361: Created a system restore point.
[0CEC:0C1C][2015-02-10T11:49:33]i000: Caching bundle from: 'C:\DOCUME~1\K4MLD~1.K4M\LOCALS~1\Temp\{1ca30da3-9557-44ec-bdf2-e0887854efd9}\.be\Message+.exe' to: 'C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\{1ca30da3-9557-44ec-bdf2-e0887854efd9}\Message+.exe'
[0CEC:0C1C][2015-02-10T11:49:33]i320: Registering bundle dependency provider: {1ca30da3-9557-44ec-bdf2-e0887854efd9}, version: 1.0.14.0
[0C00:0484][2015-02-10T11:49:33]w343: Prompt for source of package: NetFx45Web, payload: NetFx45Web, path: C:\Documents and Settings\K4MLD.K4MLD-F2F3858A4\My Documents\Downloads\redist\dotNetFx45_Full_setup.exe
[0C00:0484][2015-02-10T11:49:33]i338: Acquiring package: NetFx45Web, payload: NetFx45Web, download from: http://go.microsoft.com/fwlink/?LinkId=225704
[0CEC:094C][2015-02-10T11:49:45]i305: Verified acquired payload: NetFx45Web at path: C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\.unverified\NetFx45Web, moving to: C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\F6BA6F03C65C3996A258F58324A917463B2D6FF4\redist\dotNetFx45_Full_setup.exe.
[0CEC:094C][2015-02-10T11:49:48]i304: Verified existing payload: VMAApplication at path: C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\{70A85191-F402-4CB5-8AFF-050956C7A9E1}v1.0.14.0\Message+.msi.
[0CEC:0C1C][2015-02-10T11:49:48]i301: Applying execute package: NetFx45Web, action: Install, path: C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\F6BA6F03C65C3996A258F58324A917463B2D6FF4\redist\dotNetFx45_Full_setup.exe, arguments: '"C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\F6BA6F03C65C3996A258F58324A917463B2D6FF4\redist\dotNetFx45_Full_setup.exe" /q /norestart /ChainingPackage "Message+" /log C:\DOCUME~1\K4MLD~1.K4M\LOCALS~1\Temp\Message+_20150210114906_0_NetFx45Web.log.html'
[0CEC:0C1C][2015-02-10T11:50:36]e000: Error 0x800713ec: Process returned error: 0x13ec
[0CEC:0C1C][2015-02-10T11:50:36]e000: Error 0x800713ec: Failed to execute EXE package.
[0C00:0A0C][2015-02-10T11:50:36]e000: Error 0x800713ec: Failed to configure per-machine EXE package.
[0C00:0A0C][2015-02-10T11:50:36]i319: Applied execute package: NetFx45Web, result: 0x800713ec, restart: None
[0C00:0A0C][2015-02-10T11:50:36]e000: Error 0x800713ec: Failed to execute EXE package.
[0CEC:0C1C][2015-02-10T11:50:36]i351: Removing cached package: NetFx45Web, from path: C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\F6BA6F03C65C3996A258F58324A917463B2D6FF4\
[0CEC:0C1C][2015-02-10T11:50:36]i330: Removed bundle dependency provider: {1ca30da3-9557-44ec-bdf2-e0887854efd9}
[0CEC:0C1C][2015-02-10T11:50:36]i352: Removing cached bundle: {1ca30da3-9557-44ec-bdf2-e0887854efd9}, from path: C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\{1ca30da3-9557-44ec-bdf2-e0887854efd9}\
[0C00:0A0C][2015-02-10T11:50:37]i399: Apply complete, result: 0x800713ec, restart: None, ba requested restart: No

Try deleting the downloaded ,exe file and re-downloading and re-installing it. If you have an AV running, try disabling it just for the installation; it may be preventing some parts from installing properly.
If that isn't what you need, please ask your specific question; posting the error log may help a tech, but is not very useful to us regular customers.

Failed Reader Install - AdbeRdr910_en_US.exe has encountered a problem

XP Home
IE 8
*.tmp files cleared
Virus scan passed (Norton Antivirus)
I'm trying to upgrade from Reader 8 to Reader 9 due to some PDF display issues in IE. Immediately as soon as I start the install, I receive the error "AdbeRder910_en_US.exe has encountered a problem and needs to close".
I tried uninstalling Reader 8 first, and that didn't work.
I dug up a Reader 8 download & get a similar message.
I now have no reader at all and I'm getting the same error across multiple versions.
I've attached a couple of screen grabs of the error.

Different product, with a different form
Reader Forum http://forums.adobe.com/community/adobe_reader_forums

Unable to install AcroPro90_efg.exe

adobe acrobat 9 pro extended not printing to Adobe printer in Win 8.1
following resolution instructions at Printing problems | Acrobat 9.4.2 update to make sure all updates are installed (currently none installed and Help>Update says no update to install), I follow instruction to first install Adobe Installer (AcroPro90_efg.exe), as WIn 8.1 installer will not install Adobe updates,
When installing Adobe Installer (AcroPro90_efg.exe) it says my serial # is invalid. It is a perfectly good purchased directly from Adobe serial # which I've been using for years and Adobe 9 pro accepts it just fine.

And when I try to run manual update, beginning with AcrobatUpd911_all_incr (1).msp, since I'm still at version 9.0.0 from
Adobe - Acrobat 9 Pro Extended : For Windows , I get msg:
"The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exiss on your computer and that you have the correct upgrade patch."

Installing LK45_web.exe

Similar Messages

Maybe you are looking for