Installing Locale Installer with CCM 5.1.2

Hello, I need add the locale installer Spanish's in a cluster CCM with version 5.1.2.
In the download's page only avaible the version "cm-locale-es_ES-5.1.1.1-1.cop.sgn", I'm trying upgrade with version 5.1.1, it's fails.
For version CCM 5.1.2, can be updated with version 5.1.1 of locale to installer?
If a new version of locale is necessary to installer, somebody it has some forecast of date?
Thanks!!!

It should work. I've installed Polish locales cm-locale-pl_PL-5.1.1.1-1.cop.sgn with CCM 5.1.2 and 5.1.3. Both versions work without any problem.

Similar Messages

  • Can MDM installed along with CCM 2.0

    Hi,
    We have SRM Demo server, where currently we installed CCM. Can we install MDM along with CCM or is it mandatory to uninstall CCM before we install MDM. Please advise on this.
    Regards
    G GL

    Hi,
    You can play with several & different catalogs in SRM, so you can have CCM in your SRM system and also access to an SRM-MDM catalog.
    I hope this helps
    Best regards

  • Windows 7 64 bit machine with printer installed locally takes 2-3 minutes for printing most of the time and fails to print some time.

    Our customer  have 3-4 windows machines in local area network (No Domain Login) with different OS versions and platform architecture (32 / 64 bit)
    I have no idea about the configuration of  machine to which printer is hooked up but it is running Windows for sure.
    This machine is accessible from any other machine in LAN. They have another machine running Windows 7 64 bit OS  on which they have installed the printer connected to earlier machine  using local printer driver installation
    with local TCP/IP port being selected during installation. Installation goes well,  printer gets installed successfully and  shows ready state. but when we try to print anything on it takes 2-3 minutes to complete print job. They have tried
    this on printers with couple of different model and make but the result is same delayed printing. They have also tried to install different printer drivers like HP printer model specific driver and HP universal driver too , but the result is
    the same in all cases. earlier when they were using  32 bit XP machine with printer installed same way that they installed now for win 7 64 , there was no issue seen with regards delayed printing. is this a issue with windows  7 64
    bit printing system ? or it has to do something with mixed and matched (32/64 bit )printer drivers running on different machines on LAN ?
    I will try to get more information with regards to the machine to which printer is connected.In the mean please revert back to me if any one had face similar issue and able to resolve it successfully.    
    Thanks in Advance.

    Hi,
    Have you tried ping ip address of printer? and check if there exists any data lost in network connection. If your network connection is crowded, it can cause delay for printer.
    Also, please attempt to disable all security software temporarily, such as antivirus, firewalls,etc and
    clear all printer cache.
    Locate to task manager, check the state of spoolsv.exe, including cpu and memory. If it has high cpu or memory usage, it may be caused by malware. Thus, you'd better to make a full scan with the latest anti-virus.
    Karen Hu
    TechNet Community Support

  • Hp officejet pro 8000 a809 installed locally on vista business with driver 8.12.2008cant share to xp

    My customer has a HP Officejet Pro 8000 A809 installed locally on Vista Business with driver 8.12.2008 He wants to share this for use on the XP PC but after installation on XP and trying to go into printer properties the message comes up "The HP Officejet Pro 8000 A809 Series' printer driver is not installed on this computer. etc etc Do you want to install the driver now? It doesnt matter if you go through the installation process or not, when you try and print a test page you get "Test page failed to print. Would you like to troubleshoot etc"
    I have tried installing the XP drivers locally AND on the Vista PC but with no luck. On the shared tab under "additional drivers" there are only Vista drivers listed.
    Any advice gratefully received.
    Dan

    Depending on the model of the unit it may not be wireless. if it says A809n then it is a wireless model, but the A809a model is not.  http://h10032.www1.hp.com/ctg/Manual/c01659070.pdf Here is the manual for that unit in case you need it.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided! If you are not sure how to do this, please see the link below.
    I am a Printer Tech for HP.
    How do I give Kudos or mark a post as Solved?
    I am an HP employee

  • Installing SQL server with local Admin rights

    Dear DB experts
    I have a concern about installing SQL server 2000 on win 2003 with out local admin rights
    I have delegated local admin rights to a Domain user.  that user can install and configure SQL with out any issues or its is a must to install SQL using local administrator account   pls advise.
    Regards
    Rabbani
    RaSa

    Hi Syed_R,
    SQL Server 2000 was out of support in SQL Server Forums since April,2013. You can install SQL Server 2005 or later version and more experts will assist you.
    As other post, the user that runs the SQL Server installer must have Admin rights on the server when installing. For local installations, you must run Setup as an administrator. If you install SQL Server from a remote share, you must use a domain account
    that has read and execute permissions on the remote share.
    In addition, in preparation for setting up Microsoft SQL Server on this system, you add the Setup account to the local administrators group, also the Setup account need to have certain user rights for avoiding SQL Server installation fails. Such as Local
    Policy Object Display Name, Backup files and directories and so on.
    For more information, you can review the following article.
    http://support.microsoft.com/kb/2000257
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Lightroom6 instalation rejects installation on Windows 7 with remark that windows vista is not supported

    I tried to install Lightroom 6 on my Windows 7 System
    The installer jejects the Installation with the remark that Windows Vista is not supported by this product
    Is that Problem known? Is any solution available?

    Hi Michael,
    You can follow the article: How to troubleshoot issues that may prevent a program from being installed correctly on a Windows Vista-based computer and check whether the installer is running in Compatible Mode or not.
    If the check box for Compatibility Mode is checked and simply UnCheck it and click Apply.
    Run the installer and again and check if it still gives you any error message.
    Let us know if it works or not.
    Thanks,
    Ratandeep Arora

  • Firefox will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

    will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

    Can you attach a screenshot or link to the instructions you are following?
    You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

  • I have just made a clean instalation of Lion, with a bootable disk, and I planned to restore my files (music, photos, etc.), but Lion doesn't find my backup files. So, I'm about to loose all of my iTunes library, work docum The installation run perfectly,

    I have just made a clean instalation of Lion, with a bootable disk, and I planned to restore my files (music, photos, etc.), The installation run perfectly, but Lion doesn't find my backup files. So, I'm about to loose all of my iTunes library, work documents (I'm a lawyer!!), my kid's photos.... How can I restore my files?? Help!!

    Since you seem to be using a new disk for Lion, Time Machine will consider previous backups to be for a "different" computer.  Try doing a control-click or click-and-hold on the Time Machine icon in the Dock, then choose "Browse Other Time Machine Disks".  This should allow Time Machine to see the previous backups.
    In the worst case you should be able to open those Time Machine backups and copy your documents from there to your home folder.
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • Installed Netweaver 2004s with Rapid Installer , can not connet to BI7.0!!!

    Hi,
    I installed Netweaver 2004s with rapid installer but i can not connect to BI7.0 with SapLogon 710. SapLogon waiting for response forever. What are the post actions after I installed the Netweaver 2004s. I can connect to portal by IE.
    I am new to this so any help will be greatly appreciated.
    thanks,
    Jenni

    OS is Windows Server. SAPID is IKI. I am the only one trying to connect to BI so DPMON is not the issue. I wanted to stop and start the SAPIKI_03 service but I can not stop it, maybe it is related to that.
    What are the post steps after installing rapid installer?
    How can I make sure that I installed Java+Abap stack or only Java?
    Thank you for your help.
    jenn

  • Locale Installation Order with Pub/Sub

    Hi,
    I'm installing CM cluster 4.2 (1 pub and a few subs).
    Wish to apply user/network locale for the cluster.
    Documentation recommends
    1. Install Pub
    2. Install Subs
    3. During non Business Hours
    3.1 Install locale executable on pub at first.
    3.2 Install the same executable on the subs.
    3.3 Reload all the servers in the cluster.
    4. Apply installed locale value where applicable (e.g. phones)
    My question: is the following possible ?
    1. Install Pub
    2. During non Business Hours install locale executable on the pub and reload the server (cluster contains only pub)
    3. Apply installed locale value where applicable (e.g. phones)
    4. A few days later install subscribers in the cluster (1 or more)
    5. Then run locale installer on the subscriber servers the same way as for pub, reload then.
    A little silly question IMHO, but I am in doubt.

    Hi Tobivan,
    This is actually an excellent question (not silly at all :)
    This method shouldn't cause you any unforeseen problems. This is the same way it would happen if you were adding new Subs to an existing cluster somewhere down the road.
    Have a great day!
    Rob

  • After re-installing Lr 5 with a hard disk on my computer,installation was completed but Lm 5 didn't appear in application folder. What can I do to resolve this problem?

                [email protected]
    After re-installing Lr 5 with a hard disk on my computer; installation was completed but Lr 5 didn't appear in my application folder.
    What  can I do to resolve this problem?

    What is your OS?

  • Auto install another app with the installation of AIR app

    Hi
    I am new to desktop application development. I am stuck on an issue.
    My air application uses another application installed on user machine to capture the screen shots. I want to bundle this third party application (screen capture software) installer with my AIR application so that When user will install air app this screen capture application will automatically install on user machine.
    My whole motive is to automatically install screen capture software on user machine with installation of AIR app without user notice. I dont know how can I accomplish it.
    Thanks

    Every time that i turn on windows and i want to open an app
    that use adobe air ask me for a new version,
    and i check all the installed software and adobe air dissapier from that list.
    Please HELLPPPP!!!
    thaks

  • Installed 8.5 and now I can't build an installer with 8.0

    I've been using 8.0 to write some applications.  We have the professional development system contract or whatever with NI providing upgrades.  Our IT dept came and installed 8.5 on my computer.  I used it for a short while, then went back to 8.0.  I have not un-installed 8.5.   I'm now experencing problems building an installer with 8.0.  I get the message box that it is "unable to locate the installer source for NI Labview 8.5 distribution" and a default D drive for the original CDs which I don't have.  I do have the original 8.0 CD's and mainly for that reason  want to continue to use 8.0.  In the build process I am using additional installers for datasocket and visa 4.2.  If I uncheck them the install process will complete.  Is there someway for me to force my installer builder to use the 8.0 files instead of 8.5?  Could I do this by un-installing 8.5?  I re-installed 8.0 hoping that would help but it did not.  I searched for this problem and found several earlier postings concerning this problem but none specific to this particular issue.  thanks for any advice, Mike

    Thanks for the input centerbolt.  What a pain huh?  I'll have to think about if I want to do all that for a while   While I have administrative rights on my pc, the IS dept. is so paranoid what people might do I'm uncertain of restrictions that might stop me part way through and then be unable to recover or something.    I like LV a lot but not real happy with the build processes for compiling programs and installs.  If I copy the  LV CDs to my C drive and then do the installation from there rather than the CD drive, will the program installer quick defaulting to the D drive for unfound drivers?  Does that make sense?  Anyway, thanks again.

  • My I phone has plenty of storage but will  not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original  form with the price or free on the right hand side.

    My I phone has plenty of storage but will  not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original  form with the price or free on the right hand side.

    Call 1-800-275-2273...ask to talk to "Customer Relations"...no one else.
    Good luck.

  • How to install Jetspeed2.0 with the help of installer

    Dear All,
    i am having Jetspeed2.0-MultiDb-install.jar file for Jetspeed2.0 install i tried to run it with the following command and get the exception everytime i am attaching the details of the errors along with the problem can anyone please let me know with full command like
    java -jar Jetspeed2.0-MultiDb-install.jar command with full parameters sample how to install Jetspeed
    thanks in advance i tried with following options.for oracle database.and got the following messages.
    C:\Program Files\Jetspeed>java -jar Jetspeed2.0-MultiDb-install.jar oracle,scott,tiger,jdbc:sun:oracle://localhost:1521;SID=P
    :\Program Files\Sun\Creator2\SunAppServer8\lib\driveradapter.jar
    Loading self extractor...
    java.lang.NullPointerException
    at java.util.Hashtable.get(Unknown Source)
    at javax.swing.UIDefaults.get(Unknown Source)
    at javax.swing.MultiUIDefaults.get(Unknown Source)
    at javax.swing.UIDefaults.getUIClass(Unknown Source)
    at javax.swing.UIDefaults.getUI(Unknown Source)
    at javax.swing.UIManager.getUI(Unknown Source)
    at javax.swing.JPanel.updateUI(Unknown Source)
    at javax.swing.JPanel.<init>(Unknown Source)
    at javax.swing.JPanel.<init>(Unknown Source)
    at javax.swing.JRootPane.createGlassPane(Unknown Source)
    at javax.swing.JRootPane.<init>(Unknown Source)
    at javax.swing.JFrame.createRootPane(Unknown Source)
    at javax.swing.JFrame.frameInit(Unknown Source)
    at javax.swing.JFrame.<init>(Unknown Source)
    at org.tp23.antinstaller.selfextract.ProgressIndicator.<init>(Unknown Source)
    at org.tp23.antinstaller.selfextract.SelfExtractor.extract(Unknown Source)
    at org.tp23.antinstaller.selfextract.SelfExtractor.main(Unknown Source)
    Exception in thread "main" java.lang.NullPointerException
    at java.util.Hashtable.get(Unknown Source)
    at javax.swing.UIDefaults.get(Unknown Source)
    at javax.swing.MultiUIDefaults.get(Unknown Source)
    at javax.swing.UIDefaults.getUIClass(Unknown Source)
    at javax.swing.UIDefaults.getUI(Unknown Source)
    at javax.swing.UIManager.getUI(Unknown Source)
    at javax.swing.JOptionPane.updateUI(Unknown Source)
    at javax.swing.JOptionPane.<init>(Unknown Source)
    at javax.swing.JOptionPane.showOptionDialog(Unknown Source)
    at javax.swing.JOptionPane.showMessageDialog(Unknown Source)
    at javax.swing.JOptionPane.showMessageDialog(Unknown Source)
    at javax.swing.JOptionPane.showMessageDialog(Unknown Source)
    at org.tp23.antinstaller.selfextract.SelfExtractor.printXorTextWarning(Unknown Source)
    at org.tp23.antinstaller.selfextract.SelfExtractor.main(Unknown Source)
    kindly reply if any ideas.

    Are you using a recent JVM? does it work if you do:
    java -jar Jetspeed2.0-MultiDb-install.jar

Maybe you are looking for