Installing locales for portal SP2 and SP3

I need help installing japanese locales for portal SP2 and SP3. I have
found some documentation and have done the pkgadd but i have yet to be
able to get it to work properly.
any ideas

Hi Mathis,
To install Japanese locale do the following:
1) Untar the Japanese Language Package (desktoppackage.tar)into a directory (/opt/desktoppackage).
#tar -xvf <Package_name>
2) Do a pkgadd to install the Japanese language and follow the instructions thereafter.
#pkgadd -d . SUNWwtdjp
3) Restart both the Portal Server and Gateway.
To check the Locale:
1) Goto Desktop Servlet and User Information Channel.
2) Click edit and scroll down to Locale Information. You must see the Japanese language included here.
3) Select Japanese locale and click "Finish" button.
4) Log out and return to desktop.
This must help you out in configuring Japanese Locale.
Cheers,
raj_slash.

Similar Messages

Exchange 2010 SP1 Upgrade to SP2 and SP3. Choose language.

Hello.
I going to install Exchange 2010 SP1 multilanguage and then update to SP2 and SP3
But then i download SP2 from Microsoft it's ask fоr choose language.
It ask about installer language or about Exchange language?
What language i need to choose if i have multilanguage Exchange SP1 installer?
And if i want to Exchange EMC be in English and Outlook on client machine shows Russian what language i need to choose when install first role from Exchange 2010 SP1 multilang DVD?

Exchange EMC language depends on OS version where you are running it.
Besides about client language you have to choose Russian language pack during install. More info below...
The language of the Outlook user interface that an Outlook user sees, including the content generated by Exchange, depends on the following:
The language the user is using in Outlook
Whether the language they're using in Outlook is supported by Exchange 2010
Whether the language they're using in Outlook has been configured to be available on the Exchange 2010 server
Consider the following scenarios:
When an Outlook user who's set their language to <Language A> signs in to their Exchange 2010 mailbox and both Outlook and Exchange 2010 support the language the user has specified, <Language A>, the user will see all messages and Exchange-generated
mailbox components, for example, the Inbox, in Language A.
When an Outlook user who's set their language to <Language A> signs in to their Exchange 2010 mailbox that's been set to <Language B>, the Outlook user will see the Outlook user interface in Language A, but will see the content generated
by Exchange. For example, by default, folder names such as Inbox,
Deleted Items, and Sent Items display in <Language B>.
You can change the Exchange mailbox language setting on the server using Exchange Management Console or the Exchange Management Shell. For information about how to use the Shell to change the language setting for a mailbox on a server, see
Set-MailboxRegionalConfiguration.
From: Client Language Support for Outlook -
http://technet.microsoft.com/en-us/library/dd638175%28v=exchg.141%29.aspx
Blog |
Get Your Exchange Powershell Tip of the Day from here

Diff between WLAI sp2 and sp3

Hi,
Can somebody tell me the major difference between Weblogic Integration 2.0
SP2 and SP3
w.r.t Weblogic Application Integration. Basically the enhancements in ADK.
Do I need to change anything
for my adapter ? I see and extra directory called license, is it for the
license support of the custom developed adapter, i.e
as adapter needs to have their own licenses, so is this some sort of
framework in ADK ?
Thanks
Amit

Thanks Chris,
That helps.
Amit
Chris Stead <[email protected]> wrote in message
news:[email protected]...
Amit/All,
You currently have access to a "sanitized" version of the release notes.The only
thing you won't have is CRs fixed and known issues. New features, etcwill be
listed. How do you get this "santized" version of the release notes? Yougo to the
download page and select WLI/select platform/Proceed to Download/log-in tothe BEA
Download Center/accept license agreement and then you will be at theSoftware
Download page. On this page, you will see a link "Download WeblogicIntegreation
2.0 Service Pack 3 Documentation and Sample Code"
Hope this helps!
Cheers,
Chris
Chris Stead wrote:
Amit,
I understand your situation. I will run it by the appropriate people
and see if
they will make the release notes available to adapter developers. Otherthan
that, this mailing list is also a great resource. It has been ourapproach to
update the sample adapters with the new feature enhancements and listthem in
the release notes. Maybe we could post the new changes to this listalso for
the benefit of adapter developers using the ADK. Sorry for theinconvience.
>>
Do you still have questions?
Cheers,
Chris
Amit wrote:
Hi Chris,
The release notes are only available for customers, and am just a
developer, so am not able to view this document.
Its difficult to open the code for DBMS/EMAIL adapter and look for the
changes w.r.t the pervious version.
Thats why I was just looking if someone can tell that or point me to
some
documentation, 'coz I had started developing
my adapter when ther version was WLIF1.0. So, thats why am not sure ifI
need to make some changes in my existing code
so as to use the framework more efficiently.
Thanks
Amit
Chris Stead <[email protected]> wrote in message
news:[email protected]...
Amit,
The biggest thing moving forward is using display.jsp versus
control.jsp.
We
will always keep the sample adapters (DBMS, Email, Sample) up to
date on
the
latest changes to the ADK. This is also listed in the Release
notes. If
you
are also interested in editing events/services, please look at the
DBMS
adapter
for this.
Cheers,
Chris
Amit wrote:
Hi,
Can somebody tell me the major difference between Weblogic
Integration
2.0
SP2 and SP3
w.r.t Weblogic Application Integration. Basically the enhancements
in
ADK.
Do I need to change anything
for my adapter ? I see and extra directory called license, is it
for the
license support of the custom developed adapter, i.e
as adapter needs to have their own licenses, so is this some sortof
framework in ADK ?
Thanks
Amit

Licensing detail for OES11-SP2-addon_with_SLES11-SP3-x86_64-

Dear team,
Please let us know, How we can take license for OES11-SP2-addon_with_SLES11-SP3-x86_64-DVD.iso.
As we have downloaded this 4GB image and starting installation, can we active license for OES11-SP2-addon_with_SLES11-SP3-x86_64-DVD.iso later on.
When we should activate license (before 2 months of installation of OES11-SP2-addon_with_SLES11-SP3-x86_64-DVD.iso)
We want DSFW services for Novell edirectory, how we can achieve please suggest us.
We want technical chat support immediately to understand the infra and novell tools to utilize in it.
Please help.

Hi,
From what I understand here ... you don't have license contract with Novell right now isn't ? We need to contact a Novell Partner in your area to get Novell licenses.
Where are you based?
Regards,

Just bought new PC running Windows 8.1. I have Install discs for Photoshop 4 and an upgrade to Photoshop 7. Unfortunately the Photoshop 4 Install disc won't run as it's incompatible with 64 bit. How do I install Photoshop 7 on my new PC? Is there a place

Just bought new PC running Windows 8.1. I have Install discs for Photoshop 4 and an upgrade to Photoshop 7. Unfortunately the Photoshop 4 Install disc won't run as it's incompatible with 64 bit. How do I install Photoshop 7 on my new PC? Is there a place I can download the Install files from?

Pagemaker is ancient, obsolete and unsupported. It was discontinued over 10 years ago. (Though why it is still sold is a mystery.)
If you want to run PageMaker, your best bet is to use a Win2K or WinXP PC.
Otherwise move to Indesign or look at Serif's PagePlus or Scribus.

I am trying to install itunes for my mobile, and I keep getting the message "You do not have administrator rights, please contact the system administrator to preform an update." I have it set as adminstrator as the user.

I am trying to install itunes for my mobile, and I keep getting the message "You do not have administrator rights, please contact the system administrator to preform an update." I have it set as adminstrator as the user. I am running Windows 7 Ultimate. Help please?

Thanks, but I've done that several times & it still says I need administraive privileges. I had itunes installed with no problems until I did the latest update. After that it just disappeared, so I tried reinstalling. Now I can't sync my phone. This is so frustrating!

Different session handling of weblogic on SP2 and SP3

          I have set up 2 weblogic servers which are using the same cookie name, and having
          the same webapp name, on the same physical machine thus
          http://127.0.0.1:7220/test (Server A).
          http://127.0.0.1:9999/test (Server B).
          Using Weblogic 6.1 Service Pack 2
          1. Access Server A
          - Server A generate a new Session ID "123456...."
          2. Redirect Link from Server A to Server B
          3. Access Server B
          - Server B generate a new Session ID "987654..."
          4. Redirect Link from Server B to Server A
          5. Access Server A
          - Reused the same session ID "123456...."
          Using Weblogic 6.1 Service Pack 3
          1. Access Server A
          - Server A generate a new Session ID "123456...."
          2. Redirect Link from Server A to Server B
          3. Access Server B
          - Server B generate a new Session ID "987654..."
          4. Redirect Link from Server B to Server A
          5. Access Server A
          - Regenerate a new session ID "ABCDEFGHI...."
          Why weblogic server handle session differently in SP2 and SP3??


I think this was a bug in SP3. You could raise a support ([email protected]) call to
          confirm.
          Rick Bongpipat wrote:
          > "Rick Bongpipat" <[email protected]> wrote:
          > >
          > >I have set up 2 weblogic servers which are using the same cookie name,
          > >and having
          > >the same webapp name, on the same physical machine thus
          > >
          > >http://127.0.0.1:7220/test (Server A).
          > >http://127.0.0.1:9999/test (Server B).
          > >
          > >Using Weblogic 6.1 Service Pack 2
          > >
          > >1. Access Server A
          > >- Server A generate a new Session ID "123456...."
          > >2. Redirect Link from Server A to Server B
          > >3. Access Server B
          > >- Server B generate a new Session ID "987654..."
          > >4. Redirect Link from Server B to Server A
          > >5. Access Server A
          > >- Reused the same session ID "123456...."
          > >
          > >Using Weblogic 6.1 Service Pack 3
          > >
          > >1. Access Server A
          > >- Server A generate a new Session ID "123456...."
          > >2. Redirect Link from Server A to Server B
          > >3. Access Server B
          > >- Server B generate a new Session ID "987654..."
          > >4. Redirect Link from Server B to Server A
          > >5. Access Server A
          > >- Regenerate a new session ID "ABCDEFGHI...."
          > >
          > >Why weblogic server handle session differently in SP2 and SP3??
          >
          > In relation to previous question.
          >
          > I have 3 qns about session creation behaviour:
          >
          > 1. When a web container receives a session cookie (eg. JSESSIONID) whose session
          > id does not exists in this
          > server, should the server create a new session ?
          >
          > 2. If a session is to be created because there is a session cookie, then should
          > the new session id
          > be the one sent or should it be a newly generated session id ?
          >
          > 3. If a new session id is to be generated, then should the new session id be used
          > to overwrite that in the cookie
          > and send it back to the client ?
          Rajesh Mirchandani
          Developer Relations Engineer
          BEA Support

I am not able to update any apps, when I tap on update, installing, appears for a second and 'update' appears again.

On my iphone5 , When I tap on update, installing, appears for a second and update appears
Again and it does not updates, this happens on my ipad2 and iPhone 3 also.

Settings>General>Software Update is currently only available for IOS 5 and above.
If your are using IOS 4, you need to connect to iTune (computer) to update software
http://support.apple.com/kb/HT4972

HT4534 i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?

i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?

When I try to make a call it will go through and I can hear the other person but they cannot hear me, is there a setting that disables the speaker when using the headphones to try to make a call, also speakerphone automatically goes on when I start a call which I do not like, any suggestions how to fix this?
I also have this problem...........

Dn for Portal groups and users

Hi,
I have installed Oracle 9iAS release 2 on Windows NT. I need to modify the OID entries structure for Authentication.
Instead of the existing structure :
dc=xxx
- dc=yyyy
- cn=Users
- cn=Groups
I have a structure like this :
dc=xxx
- dc=yyyy
- cn=Users
- cn=InternetUsers
- cn=User1
- cn=User2
- cn=IntranetUsers
- cn=User3
- cn=User4
Can I configure Portal to use this structure/data for authentication,instead of the default DIT?
Thanks,
Shipra Surendra

yes you can do it...
go to the you
dc=xxx
-dc=yyy
--cn=oraclecontext
---cn=products
----cn=common
here replace the both dn for the user and group lookins.... and give same acl as to the new one as of default... that's it

ITunes will no longer download. It says it has not been correctly localized for this language, and to run the English version. How do I do that?

My iTunes will no longer download.
All of a sudden I get the message "This version of iTunes has not been correctly localized for this language. Please run the English version".
How do I fix this and run the English version again? .

Start by trying to repair iTunes from the programs and features control panel.
Otherwise, for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Forgot Password Only have install disks for 10.4 and disk #2 for 10.5

Hello,
I was playing around on my macbook last night and changed my password to a password that i always use for just about everything and when i changed it worked because i had to logout cause something froze and safari was really messed up so when i logged in the new password worked but a few minutes later i was trying out some really old app from like 10.2 or something like that and it froze everything except finder so i tried to force quit and that wasn't working so i logged out and that froze too. So then i had to hold the power button down to shut it down and after i got it back up and running i tired to login with the new password i made earlier and it rejected it. I tried my old password and some really old passwords i tried caps and some of the words capital and it still didn't work. So then i was reading some other forms of people that forgot their password and stuff like that and most of them said to boot up with the install disk so i did and i did the password reset utility and it still didn't work. It said this volume can not be found or something like that. Then i realized that i had the disks from 10.4.0 and I tried to find my 10.5.0 ones and i only found disk #2 and for some reason it wasn't working when i tried to do it so then i was reading more forms about booting up in single user mode my doing Apple-S and i typed in the codes and they didn't work cause they were for 10.4.x and i heard they changed something like that in the security update that i installed so i have a big problem. I either need some hacked way of doing it or a new updated code. I will try to find my other disk and try to do it again but i know where it is its all the way up in canada at a place i own there . If there is a new code that would be Great. Or if there is some way i can download Mac OSX and burn it onto a CD or DVD because i am on the windows vista side of my mac now typing this. If anyone can't figure this out i will soon call apple. Thanks for helping. Bye
Danny

G'day Danny.
Single User Mode will work in Leopard, unless the MacBook has been properly secured, or corrupted in a more fundamental way. Were the instructions from a credible source? I am reluctant to post the instructions here, as they are a powerful weapon in the hands of the unscrupulous.
I am confused about one thing: the Leopard retail distribution usually comes on one DVD. The only time people get two disks (AFAIK) is the System Restore disks that come with a computer that ships with Leopard. From the sound of things, yours shipped with Tiger.
I don't recommend downloading OS X. You never know what you might be getting!

I am trying to launch iTunes but receive a message saying the "version has not been localized for this language" and to "run the English version" - but I dont know how ...

I upgraded the version of iTunes about a week ago but have not logged on since. when trying today I have received the following message -
"This version of iTunes has not been correctly localized for this language. Please run the English version".
I though I would try to update the version from the Apple site but to do so I have to log into iTunes which is the problem.
Any help would be greatly appreciated!
Thanks,
Ronnie

Start by trying to repair iTunes from the programs and features control panel.
Otherwise, for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Best Practice for Portal Patches and effort estimation

Hi ,
One of our client is applying the following patches
1. ECC 6.0 SP15(currently SP14)
2. ESS MSS SP15(currently SP14 with some level of functional customization )
3. EP 7 SP18(currently SP14)
We would like to kwow the best practice for applying portal patches and the effort estimation for redoing the portal devt on the new patch.
o   What is the overall level of effort with applying Portal patches?
o   How are all the changes to SAP objects handle? Do they have to be
     manually re-entered?
o What is the impact of having a single NWDI instance across the
    Portal Landscape during the Patch process?
Regards,
Revathi Raju.

Hi Revathi,
o What is the overall level of effort with applying Portal patches?
overall effort to apply the patch is apprx 1/2-1 days for NW7 system. This is exclude the patch files download because it's based on your download speed.
o How are all the changes to SAP objects handle? Do they have to be
manually re-entered?
Depending on your customization. Normally it wont effect if you created the customzation application apart from SAP standard application
o What is the impact of having a single NWDI instance across the
Portal Landscape during the Patch process?
Any change that related to NWDI, you might be need to re-deployed from NWDI itself.
Thanks
Regards,
AZLY

Volume as install disk for Guest Domain and Live Upgrade

Hi Folks,
I am new to LDOMs and have some questions - any pointers, examples would be much appreciated:
(1) With support for volumes to be used as whole disks added in LDOM release 1.0.3, can we export a whole LUN under either VERITAS DMP or mpxio control to guest domain and install Solaris on it ? Any gotchas or special config required to do this ?
(2) Can Solaris Live Upgrade be used with Guest LDOMs ? or is this ability limited to Control Domains ?
Thanks

The answer to your #1 question is YES.
Here's my mpxio enabled device.
non-STMS device name STMS device name
/dev/rdsk/c2t50060E8010029B33d16 /dev/rdsk/c4t4849544143484920373730313036373530303136d0
/dev/rdsk/c3t50060E8010029B37d16 /dev/rdsk/c4t4849544143484920373730313036373530303136d0
create the virtual disk using slice 2
ldm add-vdsdev /dev/dsk/c4t4849544143484920373730313036373530303136d0s2 77bootdisk@primary-vds01
add the virtual disk to the guest domain
ldm add-vdisk apps bootdisk@primary-vds01 ldom1
the virtual disk will be imprted as c0d0 which is the whole lun itself.
bind, start ldom 1 and install OS (i used jumpstart) and it partitioned the boot disk c0d0 as / 15GB, swap the remaining space (10GB)
when you run format, print command on both guest and primary domain on this disk you'll see the same slice/size information
Part Tag Flag Cylinders Size Blocks
0 root wm 543 - 1362 15.01GB (820/0/0) 31488000
1 swap wu 0 - 542 9.94GB (543/0/0) 20851200
2 backup wm 0 - 1362 24.96GB (1363/0/0) 52339200
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
I havent used DMP but HDLM (Hitachi Dynamic link manager) seems not supported by ldom as i cannot make it work :(
I have no answer on your next question unfortunately.

Installing locales for portal SP2 and SP3

Similar Messages

Maybe you are looking for