Installing Logic Pro 8 with on a mac mini with lion

Just bought a new mac with Lion on it
I Tried to install Logic Pro8 but Lion doesn't support PPC

You can purchase the Upgrade and install it on your New MBP...
Just have the Serial Number from LP 8 handy for when you are asked for it...
After the install you will need to run Software update to get the Latest version of Logic 9 for Lion..
Or you can Download it from Here
http://support.apple.com/kb/dl1014
Logic for Lion
http://support.apple.com/kb/HT4807

Similar Messages

  • Can't instal Logic Pro 9 on my new Mac Book Pro

    I installed Logic Pro 9 on my new Mac Book Pro just to receive the Message, the New Mac doesn't Accept old Power Programms...
    HELP. I spent so much money just for the reason to use Logic for my music Production.
    THANK YOU

    Run Disk Utility.
    Select the Mac Partition on that drive (Macintosh HD or whatever you called it)
    Click (Repair Disk)
    Repeat until it comes clean or gets stuck.
    Report any error message back here, with exact wording, please.

  • Will logic pro x run on my mac mini dual core intel i5 with 4gb of ram and mountain lion ?

    hi there guys,
    will logic pro x run on my mac mini dual core intel i5 with 4gb of ram and mountain lion ?
    I'm not sure if my machine is 64 bit - it is the current model base mac mini.
    Many thanks for any help you can offer !
    Simon

    SkiJumptoes is right. 4GB is not enough to comfortably run Logic X.
    Your Mac Mini will need DDR3 SODIMM RAM. That website seems incredibly steep though. I guess that's the price of finding it for you. You're better off going to any below:
    http://www.ebuyer.com/191206-kingston-4gb-ddr3-1066mhz-laptop-memory-kvr1066d3s7 -4g?utm_source=google&utm_medium=products&gclid=COqM6KzdxbgCFcfJtAodoicARg
    http://www.ballicom.co.uk/cmso4gx3m1a1600c11-corsair-value-select--memory--4-gb- -so-dimm-204pin--ddr3--1600-mhz--pc312800--cl11--15-v--unbuffered--nonecc.p87434 0.html?ref=5&gclid=CKyej_HdxbgCFQSS3godEjwAug

  • Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

    Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
    apple.com/support
          -6002F
    Does any one know how I can fix this without a recovery disc? Thanks

    I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
    I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
    I tried swapping with a Mechinal Harddrive, no luck.
    Kept the Mechanical drive in, and tried with some other Ram, it worked..
    So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
    It was Ram for me..

  • Logic pro 7.2 on new mac mini?

    Can I use logic pro 7.2 on my new mini? Im waiting to get logic pro x or 9 and im thinking of using logic 7.2 while im waiting.

    No.
    http://support.apple.com/kb/HT4807

  • Re: installing Logic Pro X on a second computer that doesn't have much internet bandwidth

    I have two complete studios, two locations, two Mac minis. The first has full internet bandwidth and I've installed Logic Pro X with all the additional content. The second is in a rural location where I have very limited, very slow and very expensive internet. How can I install Logic Pro X without downloading all the additional content? Can the content files be copied to a drive and then to the second computer?

    I'd take the second Mac to a place with a better connection. That's probably your best bet.
    You could try to copy the files in:
    Macintosh HD/Library/Application Support/Logic
    Not sure what the result would be. Maybe copy the files first, then install? I think either way LPX has to do this. Another way possibly, install it, then when it requires the content download, close it, copy the files over, then re-open?
    Let me know. This is all a guess.

  • TS2565 I have just installed logic pro  Version 9.1.1 to my new mac book , purchased in 2012 December. I am now being told my version of logic is not compatible with my version of OS X. Help!!!

    I have just installed logic pro  Version 9.1.1 to my new mac book , purchased in 2012 December. I am now being told my version of logic is not compatible with my version of OS X. Help!!! What can I do. I tried upgrding the logic pro software but this didn't help. It still won't open.
    Many thanks

    How did you install Logic onto your new Mac Book?
    From the App store or from the DVD boxed set?
    If it was downloaded from the App store then it should already be v9.1.8... and if it isn't you need to call Apple to help you sort this out.
    If it was originally from the DVD boxed set then you must update using software updates....
    If software updates cannot find Logic to update it then you either have...
    Renamed the Logic Pro app in which case rename it back to Logic Pro
    or
    The Logic Pro App is not in the applications folder which is where it needs to be to be updated... so move it back there.

  • Can you install logic pro onto more than one computer with the same cd key?

    can you install logic pro onto more than one computer with the same cd key?

    Only a desktop and a laptop, both of which must be Macs you own.
    (60296)

  • Can i install logic pro without the cd because my dvd driver of my mac doesn't work . i have the key for logic pro

    can i install logic pro without cd ? , i have the key for the logic pro but my dvd driver of my mac doesnt work ?

    Buy an external USB2 DVD/CD drive..... (Amazon's Basic model works great)
    Or..
    Borrow someone else's Mac that has a DVD drive fitted and use that via Remote Disk
    Note:
    There is no legal means of downloading available for Logic Pro 9.. unless you originally purchased it via the App Store..
    Therefore, in your case, you must install from the DVDs you have...

  • Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion.  Use the program Pacifist to install it.

  • Logic Pro 9 (9.0.0).   Message You can't use this version of the application Logic Pro 9 with this version of Mac OS X You have Logic Pro 9 9.0.0.   I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

  • Logic remote of my iPad is not connecting anymore with Logic Pro X of my i Mac

    Logic remote of my iPad is not connecting anymore with Logic Pro X of my i Mac.
    Pls help
    tks
    Kind Regards
    Richard Garrell
    Belo Horizonte
    Brazil

    Hi Richard Gl , 
    Welcome to the Apple Support Community!
    I understand that your Logic Remote is not connecting. In this situation I suggest reading over the attached information and making sure that Logic Remote is set up correctly. I would also suggest trying to connect using Wi-Fi and Bluetooth.
    Logic Remote for iPad: Get started
    Cheers,
    Joe

  • Can logic pro work with mac 10.6.8

    how can i instal logic pro to this sytem because its not lettingme and i need it so bad.

    Logic Pro X only runs on 10.8 and above, so you just need to update your OS.  There might be some macs that won't let you update the OS that far - then you will have to update your computer, which you will be happy to do judging by the level of need for the product (so bad).

  • How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro?

    How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro with OSX 10.7.4?
    This message appears: You can't open the aplication LogicPro.mpkg because power pc aplications are no longer compatible.
    Thanks folks

    You should be able to copy all the files from your old computer, although it might not work if the old machine didn't have an intel processor. When I got a new Mac a few months ago, I used the migration assistant to copy everything from my old computer's time machine backup disk. All my old pro apps, such as Final Cut Pro 6, work fine on the new machine under Lion.
    Later, I wanted to install Soundtrack pro and couldn't do it from the original disks. So I installed it on my old machine and copied the files. It worked perfectly.

  • I'm struggling to install Logic Pro 9 upgrade on Mountain Lion

    Way back we bought one of the last pre-Intel G5 in order to do music processing. We also bought Logic Studio v6 or 7. Then we upgraded to Logic Studio 8 and later decided to use a macbook pro instead of the G5. So far so good. We then upgraded to Logic Pro 9 and can run this on Lion on the Macbook Pro.
    My partner is now working away and takes his Macbook with him, so we want to set-up Logic 9 on my macbook pro which is running Mountain Lion 10.8.4. Once this is done we will take it off his machine, so not pirating in any way.
    I have managed (at great length) to install Logic Studio 8 on my machine using Pacifist, and I can open it and create projects etc... I now want to install Logic Pro 9 on this machine but I get a message saying that a qualifying copy of Logic or MainStage was not found on the disk. To complicate matters, we can't find either the logic pro 9 disk or an image copy, so I downloaded from the following link:
    http://dl.dropbox.com/u/2972851/logic-downloads-fixed.html
    which I found in this thread:  https://discussions.apple.com/thread/4948612
    I have already spent many many hours fiddling with this, does anyone know how I can get around this problem?

    Im using LPX and have found it to work well.... and no less stable than LP9 in terms of general stability. There are some bugs but given we are still in the early stages of development, that is not surprising and is no different to how it was with LP8 and 9 in their early days. I should add I haven't come across any "showstopper" bugs that affect my own personalo workflow and method of using Logic... just a few niggles and minor annoyances... that for the most part can be worked around if they haven't already been fixed in the 3 updates that have come out since initial release.
    I have had no real issues with importing LP9 projects into LPX other than of course, the lack of 32bit Plugin support in LPX which means LP9 projects that contain 32bit plugins.. will not fully import into LPX. The midi/audio data imports ok.. the 32bit plugins will be missing however... if you don't have equivilant 64bit versions installed. For me, this issue has been very minimal simply because almsot all the plugins i use, have already been updated to 64bit versions over the last few years.
    There has also been an issue with certain parameters in the track/region Inspector after import into LPX, containing weird values.. I have only had this issue once out of maybe 40+ LP9 Projects and in this one case i simply reset the values and all was well. Other users have reported different levels of how often this occurs.
    Note: Once a project has been opened and then resaved in LPX the LPX version cannot be opened in LP9 as project compatibility is only backwards and not forwards.
    If you cannot find your disk and serial..(which you will also need)  Contact Apple as they may be able to provide you with replacements disks if they have any left. Bear in mind if, as it appears, your LP9 is an upgrade from LP8 you will also need your previous LP8 serial as well as your upgrade LP9 serial to properly install Logic on a new Mac. Once installed you can and in fact must... then update LP9 to 9.1.8 via software updates in LIon or Mountain LIon... for Logic to under those OS versions.

Maybe you are looking for