Installing Logic Pro after Garagband Jam Packs, etc. Duplicate files?

I just purchased Logic Studio 9, and I am about to install it. I also have Garageband, and various Jam Packs installed. I know that Logic uses some of the same files, but I'm concerned that I will have duplicate files taking up premium disk space. Will the Logic installation overwrite the previously installed audio files/loops that were included in the Jam Packs, or will I have duplicate files?

Can you expand or qualify that response a bit. It would be appreciated. Thank you!

Similar Messages

  • After installing Logic Pro X in my iMac several menus does not appear

    After installing Logic Pro X in my iMac intel core i5 Maverixks several menus does not appear

    Thanks Eriksimon,
    Some menu items were missing. For this reason I took the Control Bar Screenshot only.
    Russell Moran went straight to the point.
    Thank you for your time!

  • After Installing Logic Pro X, my Logic Pro 9's 32-bit AUs don't work. The 32-bit bridge doesn't open and run either in my Logic pro 9. My 32-bit AU plugins are crossed out. Help?

    After Installing Logic Pro X, my Logic Pro 9's 32-bit AUs don't work. The 32-bit bridge doesn't open and run either in my Logic pro 9. My 32-bit AU plugins are crossed out. Help?

    michaelvee wrote:
    As an overworked professional, I simply have to consider the very viable options out there. Never thought I'd be seriously considering a Cubase product.
    It's a Steinberg product, not a Cubase product.. in case you haven't been paying attention Steinberg developed the virtual instrument for use in it's programs way back in Cubase 3.55.. the plethora of virtual instruments and the advent of low-latency drivers can be directly traced to Steinberg/Cubase development.. Logic also borrowed Cubase's arrange page format back in the 1980's. Cubase has borrowed from Logic to be sure but Steinberg has long been an innovator for many of the things we take for granted today. It was Logic/Emagic who licensed the VST technology and ASIO low latency format to use in Logic 4.xx. It was Apple who adapted VST to it's own AU format. Also, Cubase and Nuendo have undergone a lot more innovation over the past three years, Yamaha has been good as a parent company. Cubase is not Nuendo's little brother by the way, they are very close, same exact audio engine, same robustness, they can exchange files, the only difference being Cubase doesn't have some of the high end post features that Nuendo has. I use both Cubase and Logic and occasionally Nuendo at the University here.. I know both programs fairly well, believe me, both Cubase 6 and 7 can hold their own with any DAW out there, they just don't come with a bunch of ready made loops and preset instruments.
    LogicX will never be able to use 32-bit instruments without a third party solution, nor will it ever include the Bridge. At least according to the people I know.

  • I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

    I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

    http://www.synapse-audio.com/

  • Re-Installing Logic Pro 9 after clean installation of OS.(?)

    Hi, I had a question I just could not find the answer to on search engines, so I made a discussion thread myself.
    I currently have Logic Pro 9 installed on a Mountain Lion OSX.
    Is it possible for me to somehow re-install/transport Logic Pro 9 without losing the application?
    (Assuming that there still isn't a way to download the application from the app store due to Logic Pro X)
    I'm afraid to reformat my computer and upgrade to an SSD because I'm assuming that there is no way that I can get Logic 9 back if I lose the current installation. Other than keeping the current partitioned drive or using CCC, is there a way to re-install Logic 9 after a clean (reformatting) installation of a new partitioned drive? (A way to get it back from the app store, or keeping an installation file from the package contents of Logic Pro 9 if there is one.)
    I would really appreciate some help! Thanks.

    Yes...yes... and correct....
    The app itself is no longer sold so you can't "look" at it (or purchase it) but once you sign in to the App Store using the same Apple ID you used to purchase Logic Pro 9 in the first place...   on your new Mac you will see it available for you to download, under the purchased tab where it will say "Install"
    Again, bear in mine this only works if you purchased Logic Pro 9 via the App Store originally. It does not work for those that originally bought the DVD version of Logic Studio/Pro 9.. 
    I just had to do this myself on one of my testbed Macs which I wiped and installed 10.6.8 for testing purposes on behalf of a client of mine.....  and Logic Pro 9.1.8 was there,under the purchased tab in the Mac App Store app...  exactly as expected... ready for me to install.

  • I'm struggling to install Logic Pro 9 upgrade on Mountain Lion

    Way back we bought one of the last pre-Intel G5 in order to do music processing. We also bought Logic Studio v6 or 7. Then we upgraded to Logic Studio 8 and later decided to use a macbook pro instead of the G5. So far so good. We then upgraded to Logic Pro 9 and can run this on Lion on the Macbook Pro.
    My partner is now working away and takes his Macbook with him, so we want to set-up Logic 9 on my macbook pro which is running Mountain Lion 10.8.4. Once this is done we will take it off his machine, so not pirating in any way.
    I have managed (at great length) to install Logic Studio 8 on my machine using Pacifist, and I can open it and create projects etc... I now want to install Logic Pro 9 on this machine but I get a message saying that a qualifying copy of Logic or MainStage was not found on the disk. To complicate matters, we can't find either the logic pro 9 disk or an image copy, so I downloaded from the following link:
    http://dl.dropbox.com/u/2972851/logic-downloads-fixed.html
    which I found in this thread:  https://discussions.apple.com/thread/4948612
    I have already spent many many hours fiddling with this, does anyone know how I can get around this problem?

    Im using LPX and have found it to work well.... and no less stable than LP9 in terms of general stability. There are some bugs but given we are still in the early stages of development, that is not surprising and is no different to how it was with LP8 and 9 in their early days. I should add I haven't come across any "showstopper" bugs that affect my own personalo workflow and method of using Logic... just a few niggles and minor annoyances... that for the most part can be worked around if they haven't already been fixed in the 3 updates that have come out since initial release.
    I have had no real issues with importing LP9 projects into LPX other than of course, the lack of 32bit Plugin support in LPX which means LP9 projects that contain 32bit plugins.. will not fully import into LPX. The midi/audio data imports ok.. the 32bit plugins will be missing however... if you don't have equivilant 64bit versions installed. For me, this issue has been very minimal simply because almsot all the plugins i use, have already been updated to 64bit versions over the last few years.
    There has also been an issue with certain parameters in the track/region Inspector after import into LPX, containing weird values.. I have only had this issue once out of maybe 40+ LP9 Projects and in this one case i simply reset the values and all was well. Other users have reported different levels of how often this occurs.
    Note: Once a project has been opened and then resaved in LPX the LPX version cannot be opened in LP9 as project compatibility is only backwards and not forwards.
    If you cannot find your disk and serial..(which you will also need)  Contact Apple as they may be able to provide you with replacements disks if they have any left. Bear in mind if, as it appears, your LP9 is an upgrade from LP8 you will also need your previous LP8 serial as well as your upgrade LP9 serial to properly install Logic on a new Mac. Once installed you can and in fact must... then update LP9 to 9.1.8 via software updates in LIon or Mountain LIon... for Logic to under those OS versions.

  • Can I install Logic Pro 9 Studio on my new iMac?

    I need help with installing Logic Pro 9 Studio on my new iMac?

    Yes.
    Assuming you have a DVD drive... to install from the DVDs themselves...
    Just run Software Updates after you have installed it... so it updates LP9 (and Mainstage etc) to the latest versions which are compatible with Mountain Lion.

  • When installing Logic Pro 8, "skip" is enabled/greyed out on Logic Pro Box

    Hey all
    I'm trying to install Logic Pro 8 for the first time on on iMac, however when i get to the custom install options, the "skip" box next to Logic Pro is enabled, and greyed out, and i can't change it, therefore i can't actually install Logic. I can install main stage, compressor etc, but not logic.
    Any ideas? I have no trace of previous installations on my system as its never been installed with this set up of snow leopard, but i have double checked everywhere in my prefs, application support etc.
    I'm confused and its very frustrating!

    Use Pacifist to install it manually.
    (48572)

  • Do I need to uninstall previous version of Logic Pro before I install Logic Pro X?

    Basically what it says above!?

    You don't need to delete the previous Logic Pro version before installing Logic Pro X. Logic Pro X is a new version and won't replace the old Logic Pro version, so if you like Logic Pro X and that's what you need after testing it, remove the old Logic Pro

  • I can't re-install Logic Pro 9 in the same laptop because serial number is invalid?

    I can't re-install Logic Pro 9 in my laptop again because the serial number is invalid? help?

    1) Check you are imnputing the serial number correctly (zeros instead of ones etc..)
    2) If your version of LP9 is the upgrade version then you must first enter the original Logic Po 8 full version serial and then the Logic Pro 9 upgrade serial...
    Failing that.... contact Apple for a replacement serial....
    http://support.apple.com/kb/HT1861?viewlocale=en_US&locale=en_US

  • I installed logic pro 9 - Yamaha grand piano is missing?

    Dear all,
    After I installed logic pro 9, I tried to reopen some old projects, but now it says:
    EXS24 instrument "Yamaha Grand Piano.exs" not found 
    EXS24 instrument "Megfat_Superstrings.exs" not found 
    How can I find these instruments back?
    Thank you in advance for help on this matter
    Best regards
    Roxor85

    Alright, i've found this on my own.
    If you have the same problem, just download the additional content
    Open Logic Pro
    Logic Pro => Download Additional Content

  • How many times can I install Logic Pro?

    I need to re-install Logic Pro 8 on my computer but I hear there is a limit to how many times you can do so. Anybody know what the limit is?

    No limit on reinstalling to the same machine, it will work fine.

  • How can i install logic pro on my macbook air

    How can i install logic pro on my macbook air?

    Welcome to the Apple Support Communities
    If you bought it in discs, buy the USB SuperDrive or use Remote Disc

  • Can i install logic pro without the cd because my dvd driver of my mac doesn't work . i have the key for logic pro

    can i install logic pro without cd ? , i have the key for the logic pro but my dvd driver of my mac doesnt work ?

    Buy an external USB2 DVD/CD drive..... (Amazon's Basic model works great)
    Or..
    Borrow someone else's Mac that has a DVD drive fitted and use that via Remote Disk
    Note:
    There is no legal means of downloading available for Logic Pro 9.. unless you originally purchased it via the App Store..
    Therefore, in your case, you must install from the DVDs you have...

  • How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro?

    How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro with OSX 10.7.4?
    This message appears: You can't open the aplication LogicPro.mpkg because power pc aplications are no longer compatible.
    Thanks folks

    You should be able to copy all the files from your old computer, although it might not work if the old machine didn't have an intel processor. When I got a new Mac a few months ago, I used the migration assistant to copy everything from my old computer's time machine backup disk. All my old pro apps, such as Final Cut Pro 6, work fine on the new machine under Lion.
    Later, I wanted to install Soundtrack pro and couldn't do it from the original disks. So I installed it on my old machine and copied the files. It worked perfectly.

Maybe you are looking for

  • Business Catalyst and Creative Cloud - I'm completely lost - help!

    Okay, I am a Creative Cloud subscriber. It is my understanding that I can host five websites with Business Catalyst. However, I did not design my site using either Dreamweaver or Muse and so I just want to ftp my files into one of my sites. But I can

  • OBIEE 11g 11.1.1.6.0 installation on Windows 7 64 bit laptop issue

    I have managed to install the suite but during the final stages: 13 of 14 configuration process I got an error with the restarting of the Admin Server. I aborted the installation. Now it took hours to get to this point so I was wondering if there is

  • Not able to Use FaceTime:

    Here are the steps I followed to activate my FaceTime: 1.Seeting> facetime> enter Apple iD Screen opens up. 2. i enter the apple id and pass word hit signin button 3. next screen appear with question "People will call you using .......you like to use

  • BPM Error during delivery of message

    Hi All, I am working on BPM Scenario, to collect the files based on Correlation Id. Its working file in PROD, Last 2 days back we processed 20 message, 4 was not processed. Data looks good, and i am trying to process those 4 records. I am getting the

  • Need help in a sql statement

    Hi, I have some data like the following and I need to get only one row instead of two. Current data: ID                       Time_Type                       Time A_xyz Check_In 2009-02-11 07:00 AM A_xyz Check_out 2009-02-12 10:00 AM I want it in the