Installing LV Runtime on PC with VEE Runtime already installed?
My LabView programs have to coexist on a PC that has Agilent VEE programs on it already. At least until my programs are fully accepted, then the VEE stuff will slide to the side.
Can LV runtime be installed on a machine that has VEE runtime on it already?
Will both work fine together?
Anything that I should look out for when installing LV runtime so that it does not make the VEE programs unusable?
Jim
Solved!
Go to Solution.
Hi you don’t say which version of runtime and if you are using agilent GPIB cards?
The quick answer is yes they can run together, I would uninstall io libs install NI visa and the runtime programme.
Re install io libs, it will install itself in side by side mode.
Have a look here this will run you through the steps required.
http://cp.literature.agilent.com/litweb/pdf/5990-3731EN.pdf
Good Luck Mike
Labview Newbie
LV2009
Similar Messages
-
Is it possible to install mac os x lion with parallels 5 allready install ?
Is it possible to install mac os x lion with parallels 5 allready install ?
Parallels 5 will not work in Lion. You must upgrade to Parallels 6.
Regards. -
How do I add another programme to a mac with MS office already installed?
How do I add another programme to a mac with MS office already installed?
Just run the DMG file and it will give you the option to install it.
-
Are there any known issues upgrading to 10.8.3 from 10.7.5 with Parallels Desktop already installed in 10.7.5?
Welcome to Apple Support Communities
Most of the applications compatible with Lion are also compatible with Mountain Lion, so you shouldn't have any problem. Mountain Lion supports the latest update for Parallels 7 and 8, so if you haven't got one of these versions, you should upgrade it before upgrading Mac OS X. That application uses extensions, so it may cause kernel panics -
Does it make sense to buy an iPod touch 5th gen. 64 gb with iOS 7 and upgrade it to iOS 8, or spend a few bucks more and buy one with iOS 8 already installed?
The iOS update us free so I would get the less expensive one.
If you are getting a used one make sure this is done before you purchase it. Otherwise it may still have the Activatin Lock on
Find My iPhone Activation Lock
Apple's new iCloud tool can show if a used iPhone is stolen -
I want new computer with mountain lion already installed.
I want to buy new MacBook air with Mountain Lion already installed. Currently not available at store and can't be guaranteed on line. How long should I wait?
Welcome to the Support Communities. It's unlikely that anyone here knows how long it will be until Macs with Mountain Lion installed appear in the stores near you. If you prefer not to wait, consider buying a MacBook Air now and upgrade to Mountain Lion for free — see under "Qualifying purchases on or after July 26, 2012" here:
http://www.apple.com/osx/uptodate/ -
How can I tell where an app was installed? I share my iTunes account with family And wanting to install an app and it shows I've already installed it.
If you are seeing "Installed" in the Purchased section of your iPhone, then it only means that the app is installed on your device. Is that where you are seeing the "Installed"?
Cheers,
GB -
I am trying to install Creative Cloud on my laptop. I already installed Photoshop CC on my desktop just fine. I paid for photoshop and lightroom for two computers. Isn't that right?
Kathyrn Peters do you receive any specific error messages when you attempt to install the Creative Cloud Desktop application? Are you utilizing the process discussed in Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html to install the Adobe Creative applications?
-
I just installed Window 7 professional in place of Windows 7 Ultimate RC to which I subscribed. I was not pleased to do a clean install as opposed to an upgrade and was not informed about it.
When I reinstalled Office 2007, my outlook does not work, although exchange on the web works. I get the following error message:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panelLouis,
This issue may occur if the Outlook registry key is corrupted. When other programs try to use the Outlook Simple MAPI interface, they cannot retrieve the required information from the registry.
You must first remove the corrupted Outlook registry key, and then perform a Detect and Repair operation to have Outlook rebuild the key. To do this, follow these steps:
Click Start, and then click Run.
In the Open box, type regedit, and then press ENTER.
In Registry Editor, locate the following subkey in the registry: HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
Select the subkey, and then press DELETE.
Click Yes.
Quit Registry Editor.
Start Outlook.
On the Help menu, click Office Diagnostics.
Follow the instructions on the screen to complete the repair.
Important: Above section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows.
Hope above information helps.
Pooja Katiyar -
Windows 7 not install in Dell Inspiron 3531. windows 8.1 already install
Windows 7 not install in Dell Inspiron 3531. windows 8.1 already install. please guide me
Can't get you...Do you like to install Windows 7 on Dell Inspiron 3531 which has Windows 8.1 installed? or, you like to have both Windows 7 as well as Windows 81.?
S.Sengupta, Windows Entertainment and Connected Home MVP -
Installing CE on same host where EP7 is already installed.
Hi,
I am new to CE.
we have a EP7 SP 18 (Single Stack-->Java )system installed and it is runnig fine.
Now i want to install Netweaver CE 7.1 on the same Box.
Is it possible and advisible ?
if any one has done this please share your thoughts/Experince.
Also if we can use the same Database for both installations or we have to have separate Database
also ?
Regards
RajendraHi ,
You can install CE on same host where EP7 is already installed .I dont think it going to make any diffrence other than listener.So you can choose the different listener port during installation of CE .
Its never recomended to use same database for different systems.Its going to increase your administrative effort if you will use same DB .Anyways when you install CE in that case it will install its own database .
Hope this will clarify your doubt.
Thanks..
Mohit -
Every time I try to install Adobe Reader, I get error message "object already installed". Tried all the fixes and suggestions. I need help.
If you haved tried all the fixes and suggestions, there is not much to add. Just in case: did you really try using this tool http://labs.adobe.com/downloads/acrobatcleaner.html to first eliminate all traces of Reader, and then use the full offline installer from http://get.adobe.com/reader/enterprise/?
-
Can't install CS2 on laptop with Elements 11 already installed.
I'm taking a workshop that requires Photoshop. I use Elements 11 currently. I bought a new laptop and installed my Elements with no problem. When I went to install CS2 it says it can't find any files with CS5. My question is there a way to install CS2 without uninstalling my Elements 11? My computer lady says it's quit involved removing all parts of Photoshop from files. I went with an older version of Photoshop because I plan on only using the CS2 for this workshop and going back to Elements afterwards. Any help or suggestions would be greatly appreciated. My new system is Windows 8.1
At least for Photoshop, CS (1) runs as does CS2 and CS 3 on my macs. I still have CS2 as Genuine Fractals doesn't work with CS3 without upgrading and I don't feel like paying for that so I run 2 to use it for scaling. Adobe was pretty clear on compatibility or not and you could have chosen not to install it based on their comments.
You can install OSX "backwards" with the original install disk for your machine or a retail install disk - it would have to be a clean install of course not an A&I or upgrade.
I retained Tiger with a clone backup on all three macs , apparently you did not think to make a backup first.
Why don't you just partition a smallish part of the drive to accommodate a basic Tiger installation and install CS2 on that and just boot into it when required? You can repartition non destructively now. That is probably the fastest and simplest way to run dual OS rather that reverting everything to Tiger. Or use an external FW disk and install Tiger to that and boot from it as needed. No different than Boot Camp, to use Windows when needed. -
Installing LV7.0 on a PC with LV6.0 already installed
I am using a PC with LV6.0 and a 6025E DAQ card installed in 2001. I want to use LV7.0 sometimes and LV6.0 other times. Would installing LV7.0 on the PC lead to problems when I want to RUN something in LV6.0? Would installing LV7.0 force me to reinstall the 6025E DAQ card? I am not an expert in computers so would everything end up in a mess?
Hi labview1958,
A driver is simply the low-level code that communicates either directly to your hardware (i.e. NI-DAQ and DAQmx) or directly to other lower-level drivers (i.e. NI-VISA). All external hardware needs a driver for the computer to be able to work. You can think of a driver as a "dictionary" that is necessary for the computer to "talk" to the hardware, since they don't speak the same "language".
The type of driver you need for the NI 6025E DAQ board is called NI-DAQ. There are many different versions available for free download on our Drivers and Updates site. The latest driver that supports both LabVIEW 6i (6.0) and 7.0 is called NI-DAQ 7.1. You can download it from this location. Before installing the new driver, shut down your machine and take out the DAQ board. Then restart the machine. I would also recommend that uninstall the existing driver by going to the Windows "Start >> Control Panel >> Add or Remove Programs" and then choose to uninstall any version of NI-DAQ that already shows up there. It might be hiding under the "National Instruments Software" item. After this, you can install NI-DAQ 7.1. After installing NI-DAQ 7.1, shutdown the machine, insert the DAQ board and then restart the machine. Your machine should now find the new hardware (the DAQ board).
When installing NI-DAQ 7.1, it will by default install support for the versions of LabVIEW on your machine; therefore you should be able to use the DAQ VIs in both LabVIEW 6i and 7.0 after the install. In LabVIEW 7.0, you will see an additional palette called DAQmx. This is our new great version of DAQ VIs, but since they are not supported for any version of LabVIEW before 7.0, you will have to use the other DAQ VIs if you want consistency between your LabVIEW 6i and 6.0 code.
Please let me know if this was of any help, or if I just made you more confused, thanks.
Have fun!
- Philip Courtois, Thinkbot Solutions -
Trying to install Arch with Ubuntu hardy already installed
I have Ubuntu already installed on my system and I want to install Arch on a separate 10gig partition ( which is already made) but when I boot from the Arch cd and go to install Arch only sees the main drive it doesn't see anything else what am I doing wrong. I only want to install arch on the 10 gig partition for now until I am more familiar with Linux
Last edited by Shadowmeph (2008-05-20 17:35:28)I have just read that it is informative but I am not sure of what that will do inorder for me to be able to install Arch on My tem gig partition, when I am in ubuntu I stat gparted to see what the names of my partitions are and this is what it shows /dev/sda3 swap 1gig /dev/ sda2 reiserfs 10 gigs ( where I want to install Arch) sda1 / Ubuntu how do I install arch onto dev/sda 2 ) the ten gig partition) if arch doesn't see it? do I have to delete the partition or formaste the 10 gig partition differently? I am pretty new to Linux so I am not sure of how to do this.
this is what my grub looks like
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=18573b0e-4906-4c7f-8e32-b544fd854ab5 ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 8.04, kernel 2.6.24-16-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=18573b0e-4906-4c7f-8e32-b544fd854ab5 ro quiet splash
initrd /boot/initrd.img-2.6.24-16-generic
quiet
title Ubuntu 8.04, kernel 2.6.24-16-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=18573b0e-4906-4c7f-8e32-b544fd854ab5 ro single
initrd /boot/initrd.img-2.6.24-16-generic
title Ubuntu 8.04, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
ok edit two I think that I have Arch install but I am not sure of which way to use
Dual booting with other linux distros
This is done exactly the same way that Arch linux is loaded. Here we assume that the other distro is on partition [s/h]da3.
title Other Linux
root (hd0,2)
kernel /boot/vmlinuz (add other options here as required)
initrd /boot/initrd.img (if the other kernel uses/needs one)
[edit] Dual booting with other linux distro (Chainloading)
To avoid maintenance nightmare, you might want to chainload the GRUB in the MBR to another bootloader you might have installed in the bootrecord of a partition [(hd0,2) in our example] instead of the MBR. This way the auto-magic stuff of some distro will manage the menu.lst on (hd0,2) (if it is grub) for its own distro and you will boot with all the option needed (like the correct last kernel) without the need to copy/paste some part of that menu.lst into yours.
In our example [1], GRUB is in the MBR and some other bootloader (BL) (be it grub or lilo) is in the Boot Record of (hd0,2).
| | | | % (hd0,2) |
| M | | | B % |
| B | (hd0,0) | (hd0,1) | L % Other |
| R | | | % Distro |
| | | | % |
| ^
| chainloading |
Then, you simply use in your menu.lst:
title Other Linux distro
root (hd0,2)
chainloader +1
Last edited by Shadowmeph (2008-05-20 17:56:20)
Maybe you are looking for
-
Can I connect 2 iPods to the same computer? How does this work?
I have an iPod mini connected to iTunes. I just bought a Nano and I want to create a new library/playlist for it. When I plug it up it begins copying all of my files from my mini onto my nano. How do I separate the two? I need to have this accomplish
-
How to format data for a custom group
Hi all I have a pivot table with Actual and Budget as columns and some accounts in the rows. Since I'm using the account hierarchical column, I created custom groups for the accounts using the Selection steps pane. For example, I created a new group
-
I had to have a replacement Ipod. I had backed up the tunes and purhased apps on my pc. When I reloaded everything, the apps did not download. How can I get them back on to the Ipod?
-
while installing oracle data warehouse builder 10g i am getting prob such tat INS0009:Unable to connect to the database with user SYS java.sql.SQLException:Io exception : could not resolve the connect identifier OraHome_1\network\ADMIN\SAMPLE\TNSNAME
-
How can I determine what is stored under "other" on my iphone
When I synch my iPhone 4S, there is a fair amount of memory tied up in "other", but I don't know what is in there. How can I see and manage what is being stored in "other"?