Installing Mac OSX 10.3

When I put the the cd in it comes up and it pick the icon that say s install OSX and then i hit the restart and then a erro message comes up and says that there was erroe with the startup disk

Hi delldude!
Which one of your Macs are you trying to install on?
What OS is presently running on it?
What size is the Hard Drive, and how much space is available?
How much Ram is installed, and is it original or added?
Has the Firmware been updated?
Does your Retail Version of 10.2 Jaguar, THIS?
"...the 10.3 is from another mac..."
An install CD from another Mac model will not work.
Using OS X Install CDs/DVDs On Multiple Macs
The question of using system/software install CDs/DVDs on more than one machine is frequently asked.
So, FYI:
System software installation CDs/DVDs, that come with a particular Mac model, are hardware specific to that model, and not intended to be used on other Mac models. For instance, the CDs/DVDs that are shipped with an iMac are not to be used on an iBook or eMac.
And the "Tiger" DVDs that are shipped with any new Mac, also are not to be used on other Mac models.
If such an installation were possible, or somehow accomplished successfully, that action would constitute a violation of your license agreement, which limits installation to a single computer.
The "Single User Software License Agreement" can be found here Software License Agreement.
Similarly, any "Upgrade" CDs/DVDs for a particular Mac OS will ONLY work for that Mac & system. For example, if a new Mac that shipped with Jaguar/Panther, was purchased shortly before the release of Panther/Tiger, the user may have purchased "Upgrade" CDs/DVDs, for a lesser price than the full install set. These CDs/DVDs do not contain all of the necessary components for an independent installation of Panther or Tiger.
The license agreement applies to single user retail versions of system software. The "Panther" or "Tiger" boxed set, for example.
ali b

Similar Messages

HT1893 After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?

After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?

Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software. If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.

Problem installing Mac OSX on my new MacBook hard drive...

Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)

Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies,

How to make a image file from Pre installed Mac osx ? "PLEASE HELP :("?

hey guys ..Thanks u for the time.
So i have this eMac which has crashed and i have got may hands on another eMac.. and it works
... the only problem is.. I can take my eMac to the working eMac to do Target Mode or any thing...
So Help me..
My question is .. Is there a way to make a .DMG image file from pre installed mac osx OR
Is there a way to may a recovery disc??

You can use Carbon Copy Cloner to copy everything from the working eMac onto the non-working eMac while the working eMac is running. If your eMac will still do target mode into the working one, you can download the above software, select the booted drive as the source drive, and your eMac's drive as the target, however it is possible this will not work.
When you say your eMac crashed, what exactly happened? It is possible that the hard drive in your eMac failed or is failing, so in order to get it running again you would need to replace the hard drive. On the eMac, this repair is somewhat involved, and you have to be very careful because it exposes the CRT, which has several areas which can be extremely dangerous to touch if not properly handled. CRTs retain a great deal of voltage, even when unplugged, sometimes for weeks, and they can give you a nasty shock if you touch them in the wrong place.
Also keep in mind that cloning from the working computer to the non-working computer will ERASE any data that you have stored on that eMac, so if you don't have it backed up anywhere, you may want to attempt that with target mode before proceeding.
Good luck!

HT1338 I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working, what can I do to fix's this?

I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working,what can I do to fix's this?

Run Software Update to get to 10.6.8 and update Java.

I want to go back to Snow Leopard but I get "you have to install mac osx.app 23.1.1

I have a new 21.5 iMac I just purchased July 9 so I was able to download Lion for free under the up-to-date program. After installing Lion I decided I wanted to go back to Snow Leopard for various reasons. When I restart with the original Snow Leopard DVD that came with my machine and holding the C key down, I get the window for Mac OS X install DVD. I click the icon to install SL and another window pops up stating "You can't use this version of the application. Install Mac OSX.app with this version of Mac OSX. You have to install Mac OSX.app 23.1.1" To answer the question before hand....I don't have a time machine backup.

Thanks for all your help guys. I had trouble with my first install of Lion, it seemed buggy and when I tried some of the suggestions you offered, my machine did not always react the way it should have. I thought that was weird because it's a new iMac, only three weeks old. Pondini pointed me in the right direction and I think Lion is stable now. This worked after a few tries, not sure why I wasn't getting consistent results but it worked eventually.
1. Shut the computer down.
2. Hold "command" and "R" and turn on the computer (I believe this is recovery HD from the internet because it wasn't working from my hard drive)
3. After a few unsuccessful tries, and repeating #1 and #2, I finally got a window to reinstall Lion. This took about an hour to download and after that things went as expected.
As long as Lion is more stable than it was on my first install, which it seems to be now, I'll just stay with it. After this experience, I would say "make sure you need the features in Lion, and that all your current programs are compatible with Lion before you forge ahead."
Thanks again

When I am re-installing the Mac OSX snow leopard onto an older Mac I run into the window that says select the disk where you want to install Mac OSX but nothing is there to select

I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive. I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?

After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.

I'm trying to install Mac OSX on an external drive with my Mac Mini

A few days ago, I picked up my new Mac Mini. I'm using the install disk included with the Mini in an attempt to install Mac OSX 10.4.5 onto my external hard drive - a LaCie d2 200GB.
The installer knows the LaCie is there - but it won't let me install it there. I had no problem doing this with my last Mac (Power Mac G4). Does anyone have any suggestions?
Mac Mini Duo Core 1.66Mhz Mac OS X (10.4.7) LaCie d2 Firewire Hard Drive 200GB

If you are using an Intel mac mini you need to change the partition scheme. Without doing this the Intel Macs cannot boot from the drive.
To do this you need to open Disk Utility, select your drive (not the partition), then select the Partition tab. In there you'll see an Options… button. Click on it and change the partition scheme to GUID Partition Table. Click OK and then apply the reparitioning.
Please be aware that by making this change you will be able to boot your Intel Mac from the drive although a PowerPC drive will no longer be able to use the drive as a boot drive.

Just installed mac osx snow leopard upgrade and connected my printer to it too, and realized I have no sound anymore

Just installed mac osx snow leopard upgade and connected my printer too, and realized I have lost sound!   Can anyone help?

In case I misunderstood, did you mean that the 10.6.3 version of Snow Leopard was the upgrade? If so you need to update via 10.6.6 to 10.6.8. These updates can correct minor system upsets.
And ... did you also repair permissions both before and after you upgraded.   You should do this when you progress via 10.6.6 to 10.6.8 too.

Quicktime Player states "You can't open the application QuickTime because the Classic environment is no longer supported." I just installed Mac OSX Snow Leopard. What do I need to do?

I just installed Mac OSX (10.6.8) and can not get Quick time player to work. When I go to the Apple site to download a version that will work, it states that Quick Time Player automatically comes with OSX. What do I need to do to use Quick Time Player with 10.6.8

Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
(Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)

Installing Mac OSX Leopard Server 10.6 on a Mac Air

Hi
Im trying to install Mac OSX Server 10.6 on a Mac Air which have Lion developer preview 4 on it, i try to install from
a .dmg file thats stored in the downloads folder when it runs it give me a message "resturt to begin installation" with a
restart button, i click it and then computer restarts and nothing happens why ?
also the server file is big 7 GB so i failed to burn it on dvd or copy to external hard disk and install from there

You will want to use a external double-layer (DL) DVD disk that you've recorded, or use an external disk configured to boot the distro.
Also make a full backup of your boot disk before you load this, as there is no "downgrade" option to get back to whatever version of Snow Leopard client you might be using on the box.
Please (also) read the HT4313 support article.
And for completeness...
This particular configuration isn't supported by Apple.
Mac OS X Server doesn't "like" DHCP addressing, and that can be common on portables.

Cannot install mac OSX lion v.10.7 on mac mini

I try to install mac OSX lion v.10.7 but they say u need atleast 2GB of memory in HD Machintosh, but i have more enought memory already.

Hello, perhaps you're confusing RAM Memory with Disk Space?
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Installing Mac osX Tiger

Hi there my name is Taha and i am from Pakistan
I want to know if there is any possible chance of installing mac osx tiger into my pc i had recently bought the specification of the pc is Intel 2.66 core 2 duo with 2 gb ram 160 Gb hard disk and a 128 Mb graphics card
if not can you please give me the reason why it is not possible
Thank you

Hi Taha
Your question was asked and answered here.
Hypothetical question but why can't you install OSX on non Apple computers?

Bonjour, depuis que j'ai installé Mac osx snow leopard 10,6,3 je ne sais plus employé mon imprimante canon lbp 5000. mon mac ne trouve plus le driver et pas moyen de le télécharger. Quelqu'un aurait il une solution ??? merci

Bonjour, depuis que j'ai installé Mac osx snow leopard 10,6,3 je ne sais plus employé mon imprimante canon lbp 5000. mon mac ne trouve plus le driver et pas moyen de le télécharger. Quelqu'un aurait il une solution ??? merci

http://www.canon.fr/Support/Consumer_Products/products/printers/Laser/i-SENSYS_L BP5000.aspx

Can i install mac osx 10.5 or later on my mac??

Hi!
My my i mac has the following specs, and currently running mac osx 10.4.11....
The question is.. Can i install mac osx 10.5 or later?
Model Name:    iMac
Model Identifier:    iMac5,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.16 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache (per processor):    4 MB
Memory:    2 GB
Bus Speed:    667 MHz
Boot ROM Version:    IM51.0090.B09
SMC Version:    1.9f4
Serial Number:    CK6****QVUW
Thanks!

Yes, assuming you have enough disk space, you can install 10.5 Leopard, 10.6 Snow Leopard, and 10.7 Lion. If you want to upgrade to 10.7 Lion, I'd recommend a memory upgrade to at least 4GB.

Can i install mac osx back again after installing windows 7 on my mac book a1181?

i have apple mac book a1181 white, but i had problem logging on as it was secured by a password, and i allready lost my recovery dvd, so i installed windows 7 on my mac book a1181 by deleting its partition from GTP to NTFS but i experienced problems after installing windows 7 as sound was not comming as i could not find sound drivers for macintosh, so now i plan again to restore my apple macbook a1181 back by reinstalling mac osx 10.5.8, how can i again install mac osx on my notebook and is it possible to re-install mac on my notebook? please give me some help.

Insert your OS X install disc and restart holding the C key, hold it down until you see the Apple logo and spinning gear. Choose your language and at the next screen from the top menu bar select Utilities-Disk Utility. Select your internal hard drive, click on the Partition tab and select 1 partition. Click on the Options button and select GUID partition scheme. Click OK. Choose to format the drive as Mac OS Extended Journaled. When Disk Utility is done and your drive is properly partitioned and formatted quit DU and go back to the installer screen and reinstall OS X. When you're up and running run software update a couple times to get everything up to date as far as you can with 10.5.8. Then consider upgrading to OS X 10.6.8 Snow Leopard for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Installing Mac OSX 10.3

Similar Messages

Maybe you are looking for