Installing MAC Photoshop CS3 Extended

I just purchased, for my older MAC runnning 10.5.8, Photoshop CS3 Extended. I received 1 DVD disk, but during the installation, the progress bar indicated I was installing 1 of 3 disks, and of course about a third of the way through I was prompted to insert the next disk, but I did not get one. Am I missing something?

If its an urgent issue of yours, please visit this page, it has all the links:
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Please follow the steps mentioned in "Note" Section specially, Meticulously If you fail on 1-3 you get an "Not Authorized" Error.
Cheers
LP

Similar Messages

  • Adobe Photoshop CS3 Extend Error

    I had to re install Adobe Photoshop CS3 Extend but now every time I try to start it, it errors out withe the following:
    "Could not load the user measurement data point presets file because the file name was not valid."
    and "Could not load the user measurement scale presets file because the file name was not valid."
    Any assistance would be appreciated. Thanks!

    (no reinstalling doesn't reset the preferences...) :)

  • I am getting an error message when installing Photoshop cs3 extended on my Mac!!!! Please help

    Error message when installing Photoshop cs3 extended on my Mac!!!! PLEASE HELP!!!

    check compatibility first, http://roaringapps.com/apps:table

  • Transfer Photoshop CS3 Extended from PC to Mac

    Hi, I used to have a PC and now am using a Macbook pro. I used to have Adobe Photoshop CS3 Extended on my PC but I haven't been able to figure out how to transfer the programme onto my new computer. Any help would be very much appreciated. Thanks, Jo

    Your license is only valid for a Windows system and is too old to be swapped for a Mac.  The only chance you will have is to install a Windows emulator on the Mac and see if CS3 is able to be installed thru that.

  • Adobe Photoshop CS3 Extended installed but not working

    Adobe Photoshop CS3 Extended was added to my computer when I bought it in Thailand.
    Now (I am no longer in Thailand) I want to use it but I can't seem to open/do anything.
    Even when asking for help with the 'Help' button it states that "There was an error in initializing the Adobe Help application. You may need to re-install the applicaiton and the Help componen".
    How do I do this? Or am I missing something?
    Thanks in advance for the help!
    Eline

    Haha... I like the honesty!
    I was in bad need for a computer and went to one of those fancy, big shopping malls recommended to me by a couple of friends. I didn't even know I had Adobe Photoshop until today. I am not sure I really got screwed or things just work differently. The computer is a little strange... (I can write in Thai สกร่ฟส กส่ฟกส า่ฟส ่ if I would like to) but so far it's ben okay.
    Anyways, what would you suggest I do Mylenium?

  • Unexpected error on install photo CD plugin on MAC photoshop CS3

    Unexpected error on install photo CD plugin on MAC photoshop CS3.
    How to solve the problem??
    Detail:
    MAC mini 10.4.11 installed CS3 design stantand
    i followed all step showed on readme.txt
    i have copyed the Kodak Photo CD folder to application:photoshop CS3:plugin:format file.
    But still cannot open *.PCD
    When run photoCD.plugin and choose photoshopCS3.
    it show "Unexpected error,error-10814".

    If you do a Get Info on the selected Photoshop icon in the Finder, you
    should see the
    "Open using Rosetta" box. I have no idea why you don't. Sorry.
    http://images.macworld.com/images/legacy/2005/06/images/content/rosetta.gif
    http://cuetable.com/images/Rosetta2.jpg
    [images replaced with their links]
    c
    Click here and
    HERE for details.

  • HELP - Installing Photoshop CS3 Extended using Apple Remote Desktop

    Hello,
    I have 12 MacPro's in a classroom. Is there a way to Install Photoshop CS3 Extended using Apple Remote Desktop (not on a server) to all the computers at once?
    Thank you very much.

    I don't have access to stand-alone PS CS3, only the Design Premium CS3 disc, but that includes Photoshop, so they're probably the same system. In any case, it does not use a standard Apple packaging scheme, instead using a custom mess of hollow folders, app packages, disk images, shared resources, and xml config files.
    I briefly went ahead with the idea of doing an install, looking for what had been installed, and bundling up that virgin copy using Package Maker; but installing it elsewhere — with Installer, nevermind ARD — failed or left me with a 'crashy' copy of the apps. Maybe I just stink at making packages of other people's software, but my guess is that Adobe's installer throws files into nooks and crannies all over, or does a importantly-different install depending on your hardware/software config. In any case, I gave up and made an updated hard drive image including the new software. Deploying that worked fine.
    Sorry I didn't have better news. Good luck. Joel

  • Photoshop CS3 Extended upgrade to CS5?

    Tried asking the online chat to answer this simple question . . .  the person really didn't understand what I was asking.
    So here it goes, the complex question of —
    Will a regular CS5 upgrade work for a CS3 Photoshop Extended version or not?

    Mylenium,
    It was purchased from a big box store the US (years ago) and has a sticker on it saying "Only for distribution in North America."
    It is for use in America, and so is my SC3 Extended version currently installed on my computer.
    Both versions are for the Mac OS.
    The system requirements are not of importance since my computer meets them all. The upgrade box says nothing about "CS3 or up."
    The only mention of an upgrade on the entire box is on the side stating — "UPGRADE from an relier version. To install this upgrade version, you must have an eligible earlier version of this product. Before opening this package, check with your reseller about its return policy and your upgrade eligibility, or visit www.adobe.com/go/upgradeinfo for eligibility information."
    So, here I am, trying a webpage that doesn't exist anymore and trying to find answers here . . . . .
    Will this normal, regular, run-of-the-mill CS5 Photoshop upgrade work on a CS3 Extended version?
    Is Photoshop CS3 Extended an "eligible earlier version of this product" for the CS5 upgrade?

  • Photoshop CS3 Extended wont boot in Tiger

    Hi, I am helping my friend to sort out some problem. Would appreciate all your expertise.
    At present, my friend uses a iMac and is ready to install a Mac OS X Photoshop CS3 Extended Academic Edition.
    However, as I load the DVD into the iMac, it just spins but does not load.
    Thereafter, it spits out the DVD.
    WOuld like to know if anyone encounter this?

    Make sure the disc is clean and free of dust and finger prints.

  • Bridge not functioning in PhotoShop CS3 Extended

    I deactivated Photoshop CS3 on a computer I was no longer using and installed it (CS3) another computer.  I activiated CS3 on the new computer.  However, when trying to use Bridge, I get a message that says that Adobe no longer supports Bridge Home and Bridge does not function on the new computer. Is there anything I can do to get Bridge to function as part of CS3 Extended?

    Thanks, that worked. 
    In a message dated 12/28/2011 10:13:56 P.M. Eastern Standard Time, 
    [email protected] writes:
    Re:  Bridge not functioning in PhotoShop CS3 Extended
    created by Curt Y (http://forums.adobe.com/people/Curt+Y)  in Bridge 
    Windows - View the full  discussion
    (http://forums.adobe.com/message/4107610#4107610)

  • Adobe Photoshop CS3 Extended Trial

    Hi guys, I've recently downloaded Adobe Photoshop CS3 Extended. When I select the trial period for 30 days instead of buying the product, it says that Adobe cannot continue and it's having trouble loading the trial. I reinstalled it and restarted my computer, like it said, and nothing worked. Please help, I cannot afford Adobe Photoshop CS3 Extended right now, and I do not support piracy at all.

    I've tried to install the program from a different directory, I think my windows installer is crashing every time i try to install it, maybe I find a working hotfix for it.
    I followed these steps when i tried to install ps:
    http://666kb.com/i/b1qwvm0mq1zs8iekm.jpg
    First I downloaded it to C:~~/Downloads (1.)
    Then I extracted this file to C:~/Desktop (2.)
    Afterwards I got these files (3.)
    After clicking on setup.exe this window (4.) appears and disappears right after
    Danke für die bisherige Hilfe
    aus der Alpenrepublik
    Fabs
    /edit:
    To unregister and register the msi hasn't solve my problem.
    Now I am trying to run the sfc /scannow command.

  • Adobe Photoshop CS3 Extended Activation Problem

    Hi all, hoping someone can help me.
    I have a legitimate hard copy of Adobe Photoshop CS3 Extended which was only recently taken out of its sealed package.
    On installing and trying to activate I get an error. Now i am left with a window telling me "Registration Unsuccessful"
    Any ideas how i can go about solving this? I legally own this copy and I need to use it and can't do with it deactivating.
    Thanks in advance for any help given. It's very much appreciated!

    Mordynak I am sorry but I find no software titles registered under the Adobe ID/e-mail address you used to post to this forum.  From this discussion it sounds like you have already utilized the process listed in Find your serial number quickly.
    Please contact our support team directly at Contact Customer Care.  If this link still fails then I would recommend utilizing a different web browser as the current add-ons, security settings, add-ons may be preventing a chat session from being made available to you. 
    If you continue to face difficulties then please update this discussion.

  • Adobe Photoshop CS3 Extended freezes on startup under Windows 7 Ultimate 64-bit - No splash screen

    I installed my licensed copy of Adobe Photoshop CS3 Extended today as part of my install a bunch of software after a reinstall of Windows (due to viruses).  I did a completely fresh install of Windows 7 Ultimate 64-bit.  I've used Photoshop CS3 Extended for quite a while now so I know what to expect on startup but it was previously installed under Windows XP Professional (32-bit). Figured I would give Windows 7 a chance this time around.
    Google searches aren't turning up anything.  When I attempt to start the application, I get a window with the title "Adobe Photoshop CS3" (no "Extended" - I seem to recall the title changes later) and the toolbar appears.  However, no splash screen appears and no Product Activation wizard appears - the application simply freezes on an empty frame and a toolbar.  I've tried running Photoshop as Administrator (right-click, "Run As Administrator"), but nothing changed there.  I tried uninstalling and reinstalling.  I tried upgrading to CS3 10.0.1.  Nothing works.  The application simply freezes before it gets anywhere.
    I tried calling Adobe Support since this technically falls under installation issues but their phone support systems are down today.  Go figure.
    Edit:  I hooked into Photoshop with the Visual Studio debugger and every single thread is executing some variation of WaitForSingleObject() or WaitForMultipleObjects().  The main thread is "executing" somewhere in AdobeLM_libFNP.dll (at address 09619d81 - if I had debugging symbols for CS3, I could provide a function).  There are nine threads "running" at the point the freeze occurs - but all of them are technically suspended due to the functions they are executing - and one thread is in a suspended state.

    Log Name:      Application
    Source:        Application Hang
    Date:          7/17/2010 6:16:25 PM
    Event ID:      1002
    Task Category: (101)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Description:
    The program Photoshop.exe version 10.0.1.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: d0c
    Start Time: 01cb2616be79e36f
    Termination Time: 2
    Application Path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
    Report Id: 06f5fbff-920a-11df-9d69-001fd023417e
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Hang" />
        <EventID Qualifiers="0">1002</EventID>
        <Level>2</Level>
        <Task>101</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-07-18T01:16:25.000000000Z" />
        <EventRecordID>1615</EventRecordID>
        <Channel>Application</Channel>
        <Security />
      </System>
      <EventData>
        <Data>Photoshop.exe</Data>
        <Data>10.0.1.0</Data>
        <Data>d0c</Data>
        <Data>01cb2616be79e36f</Data>
        <Data>2</Data>
        <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe</Data>
        <Data>06f5fbff-920a-11df-9d69-001fd023417e</Data>
        <Binary>430072006F00730073002D0074006800720065006100640000000000</Binary>
      </EventData>
    </Event>
    And, according to the Event Viewer, the "Binary" data translates to a zero-terminated Unicode string of "Cross-thread".
    My Visual Studio analysis was far more informative.  All threads are hung inside of WaitForSingleObject() and WaitForMultipleObjects() calls and the DLL in question appears to be FlexNet-related.  I did forget to mention that I also even manually started the FlexNet service in case, for some strange reason, Photoshop was waiting for it to start.  That also did not work.
    (And there is nothing in the Action Center control panel either despite the message saying there might be more information there.)
    Edit:  The timestamp above might be a little odd-looking.  I didn't originally see anything in Event Viewer until I clicked the first button to send an Error Report.  Mostly I just skipped that part of killing a process.

  • Problem Reading Adobe Photoshop CS3 Extended In Windows

    I have Windows 7 and Photoshop CS3 Extended; can't read .psd file; error says not a supported file type; need to work with layers. When installed, received a Successful message upon installation. A solution to reading .psd files in Windows?

    Thanks to both of you for responding.  The files I am referring to are loaded to my C drive from ADOBE PHOTOSHOP CS3 "CLASSROOM IN A BOOK" tutorial.  On the cover, it says "The official training workbook from Adobe Systems".  I don't know what to do at this point.  I'm ok with Html. Just need photoshop knowledge added and understand usde of .psd files provides a means to work with layering.  Any suggestions?

  • Trying to install Photo Shop CS3 Extended on Windows 8 and keep getting database corrupted

    Hi, I am trying to install my Adobe Photoshop CS3 Extended on my new Windows 8 OS 64 Bit computer. The CD does not have a scratch on it, it is like new. I get the error database is corrupted. Contact Adobe Support.
    I went to the Adobe website and downloaded the updated installer, same error. I tried running the installer in Windows XP compatibility mode, it looks like it installed, but when I run I get database corrupted.
    I could really use some help.

    Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 3 products

Maybe you are looking for

  • Schedule Line Combination

    Hi SAP Guru's      Schedule Line Combination In Delivery Currently, we are using scheduling agreements to book sale orders in SAP. For every sale order item, based on customeru2019s purchase order there can be more than one schedule line for the item

  • Howto restore original nokia software after hard r...

    I have an N79 phone. Recently, due to some problems I had to hard reset my phone. I took backup of all my contacts, messages, etc. which I could restore easily using PC suite. However, I lost some software which had been originally installed by nokia

  • How do I change height of the Spry Horizontal Menu Bar?

    Hi, I've been playing around with the Spry menu bar for 3 days now and I can't seem to increase the height of the spry menu bar the way I want. It increases when you enlarge the text, but I don't want it to get too big, but I still need to increase t

  • Billing Block removal not updated in the sales order change log

    Hi Gurus, A specific Billing Block is automatically assigned to the sales document header (VBAK-FAKSK) when the net value of the sales order is negative. This is an order related billing. Sometimes the Billing block is getting released automatically

  • I can't rename a Workstation.

    Environment: NW 6.5, Zfd 4, eDir 8734 I'm trying to rename an imported workstation from: SY13-01-SITEA - XX:XX:XX:XX:XX:XXWIN2000 to: SY13A-01-SITEA - XX:XX:XX:XX:XX:XXWIN2000 and I keep getting the following error: Invalid Character(s) in Object nam