Installing Management Agent

When installing the management agent on a Windows 2000 System, I get the
following error (Status = Fail) (Reason = Fail to start service), and it
seems there is nothing installed on the 2000 server.
Any ideas?
With regards,
Rocco van der Veer

[email protected],
>I get the
>following error (Status = Fail) (Reason = Fail to start service), and it
>seems there is nothing installed on the 2000 server.
Is anything reported in the event viewer?
Is a log file created in c:\novell\zfdtemp?
If so, feel free to post it.
Jared
Systems Analyst at Data Technique, INC.
jjennings at data technique dot com
Posting with XanaNews 1.17.6.6 in WineHQ
Check out Novell WIKI
http://wiki.novell.com/index.php/IManager

Similar Messages

Is OMS needed when install management agent

I just want to configure SNMP for oracle database, so I install management agent on database server using reponse file like this:
/scratch/john/linux/agent/runInstaller -silent -responseFile /scratch/john/linux/response/additional_agent.rsp
but it should confiure OMS_HOST in "additional_agent.rsp".
so my question is: how to configure SNMP for oracle with less components?

Thanks!
You mean dbconsole, but you give a link about grid console, right?
And the following is figure of "Basic Components of Oracle SNMP Support", whether it means Master Agent can send snmp trap to NMS without Management Agent or Management Service?
http://download.oracle.com/docs/cd/E11857_01/em.111/b16244/img/mgmtstn.gif
http://download.oracle.com/docs/cd/E11857_01/em.111/b16244/chap1.htm#BGEIJJAJ

Problem Installing Management Agent 10.2.0.2 on Windows 2003

I have seen this question asked in the forum but I haven't been able to find the answer anywhere in the discussion.
I am trying to install Management Agent 10.2.0.2 on Windows 2003 SP 2 interactively. Whenever I run setup.exe, the installation checks the prereqs and then closed without opening the OUI.
Here is the content of the log, OraInstall2008-04-10_08-14-09AM;
Using paramFile: E:\APPS\ORACLE\sysman\agent_download\10.2.0.2.0\Win32_Grid_Control_agent_download_10_2_0_2_0\win32\agent\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 5.2
Passed
All installer requirements met.
The commandline for unzip:
E:\APPS\ORACLE\sysman\agent_download\10.2.0.2.0\Win32_Grid_Control_agent_download_10_2_0_2_0\win32\agent\install\unzip -qqq ..\stage\Components\oracle.swd.jre\1.4.2.8.0\1\DataFiles/"*.jar" -d "C:\DOCUME~1\jij9\LOCALS~1\Temp\3\OraInstall2008-04-10_08-14-09AM"
The commandline for unzip:
E:\APPS\ORACLE\sysman\agent_download\10.2.0.2.0\Win32_Grid_Control_agent_download_10_2_0_2_0\win32\agent\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.2.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\jij9\LOCALS~1\Temp\3\OraInstall2008-04-10_08-14-09AM"
Please help..
Omar

I got the same issue with Windows XP then sometimes the same exe worked. But I tried the other way, you have one more setup file in install directory. Try to run that and see. It may be silly but it worked.

Management Agent service not created with 10gR2 RAC DB install on Win2003?

Our 10gR2 RAC installation on Win2003 platform didn't create management agent service. After installing and setting up current release of OEM with Grid Control (10.1) and installing Management Agent from 10.1 OEM distribution (install additional management agents option), agent service is up and running. However, there is one small problem:
All target configuration xml files are created under 10.2 Oracle home, and agent running from 10.1 home does not see them - which means database, listener, etc are not registered in OEM.
Is this a known problem, and is there solution for it?
thanks,
Dejan Bogojevic
ps. message posted on metalink also

GlobalBank.ESB application will be created only when you run DynamicResolution
Setup.
run \Source\Samples\DynamicResolution\Install\Scripts\setup_bin.cmd to install GlobalBank.ESB application
on BizTalk Server.
thanks Rachit.

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

Installation Issues for Management Agent on AIX

I am having installation issues with Oracle Management Agent Install using OUI....
I have done the following:
i)     download AIX_Grid_Control_agent_download_10_2_0_1.zip to aix machine.
ii)     unzip , it creates aix directory.
iii)     unzip "oui_aix.jar " , which is available under aix/oui/
iv)     pl unjar "oui_aix.jar " , ( jar -xvf oui_aix.jar )
v)     set AGENT_HOME=/oracle/WD1/oem/
vi)     chmod –R 777 * from /oracle/WD1/oem/
vii)     invoke ./runInstaller from aix/oui/Disk1/
When I invoke runInstaller it asks me for Additional Management Service install but after first screen does check ask Oracle Home and then goes intsall OUI and never asks for OMS and OMS port etc..
Can I install the Management agent through OUI... What are the steps ?
Thanks,
Atul

I deinstalled the OUI and again re-installed.. but still I cannot get it working.. That is why I was looking that if somebody came accross the same issue... Why it does not ask the OMS page at all.. If some body has installed Management Agent on AIX through OUI pl. respond.
Thanks
Atul

Installation Oracle Management Agent 11g in Linux

Hi,
I am Arun From India..
I am planning to Install Oracle management Agent 11g in a Linux (5.5 32-bit) Server...But I saw many methods in Website to Install........
Please help me to select the Easy method to Install Oracle Management Agent and Please bring the document to Install Management Agent......
Could you specify how can we Configure the DATABASE with AGENT.....?????????????
Please help me........Hope your Support........
Arun Kurungatt

Hi slatterych,
Thanks for your Valuable Support and Comments...I have some Doubts before Installation.
I am going to Install Agent on Server-2 , which contains Oracle DB 11g only now ( No Grid Control )..So What are the Things I need to perform in Server-2 while installing Agent (Silent mode)??? Is That same like which you Sent???
Already I have Installed OEMGC in Server-1.. How can I connected Agent from Server-2 to OEMGC (Server-1)????
Should I add OMS details of Server-1 in additional_agent.rsp ( Server-2 ) before installing Agent????
Hope your Support...Please
Arun Kurungatt

Management agent not showing up in OEM Grid

I installed Management agent on one of our Linux servers but it is not showing up in the OEM Grid. Any help would be welcome. Thx. Bob
Our db is 10.2.0.4.
Edited by: 807066 on Nov 8, 2010 4:31 PM

What is the output when issuing <AGENT_HOME>/bin/emctl status agent
Regards
Rob
http://oemgc.wordpress.com

Installing oracle management agent 12.1.0.2.0 in silent mode.

version: 12.1.0.2.0
platform: IBM Aix power systems 64bit
I installed the oracle management service along with the oracle management agent that comes along with the the first installation. I deinstalled the first installed OMA and tried to install it again using the silent install mode with the response file.
(oms host and the oma host are the same)
among the 3 modes of silent install described in the installation guide, i used agent deploy method.
Here are the steps i followed with the install
1. this the status of my OMS
<oracle>chh-aix-beta/oem12c/product/oms/bin> ./emctl status oms -details
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Enter Enterprise Manager Root (SYSMAN) Password :
Console Server Host        : chh-aix-beta
HTTP Console Port          : 7788
HTTPS Console Port         : 7799
HTTP Upload Port           : 4889
HTTPS Upload Port          : 1159
EM Instance Home           : /oem12c/product/gc_inst/em/EMGC_OMS1
OMS Log Directory Location : /oem12c/product/gc_inst/em/EMGC_OMS1/sysman/log
OMS is not configured with SLB or virtual hostname
Agent Upload is locked.
OMS Console is unlocked.
Active CA ID: 1
Console URL: https://chh-aix-beta:7799/em
Upload URL: https://chh-aix-beta:1159/empbs/upload
WLS Domain Information
Domain Name      : GCDomain
Admin Server Host: chh-aix-beta
Managed Server Information
Managed Server Instance Name: EMGC_OMS1
Managed Server Instance Host: chh-aix-beta
WebTier is Up
Oracle Management Server is Up2. I got the version and the platform info of the oms by doing the following
<oracle>chh-aix-beta/oem12c/product/oms/bin> ./emcli get_supported_platforms
Getting list of platforms ...
Check the logs at /oem12c/product/gc_inst/em/EMGC_OMS1/sysman/emcli/setup/.emcli/agent.log
About to access self-update code path to retrieve the platforms list..
Getting Platforms list ...
Version = 12.1.0.2.0
Platform = IBM AIX on POWER Systems (64-bit)
Platforms list displayed successfully.3. I downloaded the management agent software by doing the following ()
$<OMS_HOME>/bin/emcli get_agentimage -destination=/oem12102 -platform="IBM AIX on POWER Systems (64-bit) " -version=12.1.0.2.04. I unzipped the management agent software.
5. I edited the response file as follows. (i edited only the oms_host, em_upload_port, agent_registration_password, since they are the only ones that are mandatory)
OMS_HOST=172.16.24.65
EM_UPLOAD_PORT=1159
AGENT_REGISTRATION_PASSWORD=cchorcl01
#AGENT_INSTANCE_HOME=
#AGENT_PORT=
b_startAgent=true
#ORACLE_HOSTNAME=
#s_agentHomeName=
EM_INSTALL_TYPE="AGENT"6. then i ran the AgentDeploy.sh script using the following.
./agentDeploy.sh -ignorePrereqs AGENT_BASE_DIR=/oem12c/base/agent RESPONSE_FILE=/oem12102/agent.rsp(I ignored the prereqs because, i was getting an error with the hostname and the hostname is correct)
7. this the following output i am getting after running step 6.
-e Validating the OMS_HOST & EM_UPLOAD_PORT
Executing command : /oem12c/base/agent/core/12.1.0.2.0/jdk/bin/java -classpath /oem12c/base/agent/core/12.1.0.2.0/jlib/agentInstaller.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/OraInstaller.jar oracle.sysman.agent.installer.AgentInstaller /oem12c/base/agent/core/12.1.0.2.0 /oem12102 /oem12c/base/agent -prereq
Validating oms host & port with url: http://172.16.24.65:1159/empbs/genwallet
Validating oms host & port with url: https://172.16.24.65:1159/empbs/genwallet
Return status:3
Unzipping the agentcoreimage.zip to /oem12c/base/agent ....
12.1.0.2.0_PluginsOneoffs_212.zip
Executing command : /oem12102/unzip -o /oem12102/12.1.0.2.0_PluginsOneoffs_212.zip -d /oem12c/base/agent
Executing command : /oem12c/base/agent/core/12.1.0.2.0/jdk/bin/java -d64 -classpath /oem12c/base/agent/core/12.1.0.2.0/oui/jlib/OraInstaller.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/xmlparserv2.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/srvm.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/emCfg.jar:/oem12c/base/agent/core/12.1.0.2.0/jlib/agentInstaller.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/share.jar oracle.sysman.agent.installer.AgentInstaller /oem12c/base/agent/core/12.1.0.2.0 /oem12102 /oem12c/base/agent /oem12c/base/agent/agent_inst AGENT_BASE_DIR=/oem12c/base/agent -ignorePrereqs AGENT_BASE_DIR=/oem12c/base/agent RESPONSE_FILE=/oem12102/agent.rsp
Cloning the agent home...
Executing command: /oem12c/base/agent/core/12.1.0.2.0/oui/bin/runInstaller -ignoreSysPrereqs -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/oem12c/base/agent/core/12.1.0.2.0 -responseFile /oem12102/agent.rsp AGENT_BASE_DIR=/oem12c/base/agent AGENT_BASE_DIR=/oem12c/base/agent RESPONSE_FILE=/oem12102/agent.rsp -noconfig ORACLE_HOME_NAME=agent12c3 -force b_noUpgrade=true AGENT_PORT=-1
Clone Action Logs Location:/software/oracle/logs/cloneActions<timestamp>.log
Cloning of agent home completed successfully
Attaching sbin home...
Executing command: /oem12c/base/agent/core/12.1.0.2.0/oui/bin/runInstaller -ignoreSysPrereqs -attachHome -waitForCompletion -nowait ORACLE_HOME=/oem12c/base/agent/sbin ORACLE_HOME_NAME=sbin12c3 -force
Attach Home Logs Location:/oem12c/base/agent/core/12.1.0.2.0/cfgtoollogs/agentDeploy/AttachHome<timestamp>.log
Attach home for sbin home completed successfully.
Updating home dependencies...
Executing command: /oem12c/base/agent/core/12.1.0.2.0/oui/bin/runInstaller -ignoreSysPrereqs -updateHomeDeps -waitForCompletion HOME_DEPENDENCY_LIST={/oem12c/base/agent/sbin:/oem12c/base/agent/core/12.1.0.2.0,} -invPtrLoc /oem12c/base/agent/core/12.1.0.2.0/oraInst.loc -force
Update Home Dependencies Location:/oem12c/base/agent/core/12.1.0.2.0/cfgtoollogs/agentDeploy/UpdateHomeDeps<timestamp>.log
ERROR: Update home dependency failed.I am getting stuck at updating home dependencies. I dont know what that means. If you have faced similar problems while installing oracle management agent please do share your solution. if you need more info please let me know.

All these commands are run on the host (hostname=chh-lpar20) where the agent is being installed, and these commands are run as root user.
ifconfig -a
en0: flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN>
        inet 172.16.28.222 netmask 0xfffffc00 broadcast 172.16.31.255
         tcp_sendspace 131072 tcp_recvspace 65536 rfc1323 0
lo0: flags=e08084b,c0<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,LARGESEND,CHAIN>
        inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
        inet6 ::1%1/0
         tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1ping chh-lpar20
PING chh-lpar20: (172.16.28.222): 56 data bytes
64 bytes from 172.16.28.222: icmp_seq=0 ttl=255 time=0 ms
64 bytes from 172.16.28.222: icmp_seq=1 ttl=255 time=0 msnslookup chh-lpar20
Server:         172.16.29.213
Address:        172.16.29.213#53
** server can't find chh-lpar20: NXDOMAINnslookup 172.16.28.222
Server:         172.16.29.213
Address:        172.16.29.213#53
** server can't find 222.28.16.172.in-addr.arpa: NXDOMAINto check the if the port 3872 and 1830-1849 are free I ran the follwoing command
./agentDeploy.sh -prereqOnly AGENT_BASE_DIR=/oem12102/base/agent
this was the result i got inregards to the ports
Check complete: Passed
========================================================
Performing check for PortCheck
Checking for port availability and hostname validity...
Trying for host : chh-lpar20/172.16.28.222 and port : 3872
Trying for host : chh-lpar20/192.168.12.23 and port : 3872
Port= 3872 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1830
Trying for host : chh-lpar20/192.168.12.23 and port : 1830
Port= 1830 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1831
Trying for host : chh-lpar20/192.168.12.23 and port : 1831
Port= 1831 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1832
Trying for host : chh-lpar20/192.168.12.23 and port : 1832
Port= 1832 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1833
Trying for host : chh-lpar20/192.168.12.23 and port : 1833
Port= 1833 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1834
Trying for host : chh-lpar20/192.168.12.23 and port : 1834
Port= 1834 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1835
Trying for host : chh-lpar20/192.168.12.23 and port : 1835
Port= 1835 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1836
Trying for host : chh-lpar20/192.168.12.23 and port : 1836
Port= 1836 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1837
Trying for host : chh-lpar20/192.168.12.23 and port : 1837
Port= 1837 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1838
Trying for host : chh-lpar20/192.168.12.23 and port : 1838
Port= 1838 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1839
Trying for host : chh-lpar20/192.168.12.23 and port : 1839
Port= 1839 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1840
Trying for host : chh-lpar20/192.168.12.23 and port : 1840
Port= 1840 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1841
Trying for host : chh-lpar20/192.168.12.23 and port : 1841
Port= 1841 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1842
Trying for host : chh-lpar20/192.168.12.23 and port : 1842
Port= 1842 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1843
Trying for host : chh-lpar20/192.168.12.23 and port : 1843
Port= 1843 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1844
Trying for host : chh-lpar20/192.168.12.23 and port : 1844
Port= 1844 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1845
Trying for host : chh-lpar20/192.168.12.23 and port : 1845
Port= 1845 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1846
Trying for host : chh-lpar20/192.168.12.23 and port : 1846
Port= 1846 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1847
Trying for host : chh-lpar20/192.168.12.23 and port : 1847
Port= 1847 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1848
Trying for host : chh-lpar20/192.168.12.23 and port : 1848
Port= 1848 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1849
Trying for host : chh-lpar20/192.168.12.23 and port : 1849
Port= 1849 is busy.
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: Either port is unavailable or hostname configuration is not valid.
Recommendation: Make sure the port is available and the hostname configuration i
s proper.I don't know what to make of the results I got for executing the nslookup command.

How do I install a management agent

How do I install a management agent?
I have OMS installed on Server A.
I have server B that I need to manage with OMS, how do I install an agent on that?
There seems to be no clear way of installing an agent, and pointing it to Server A for registration.
I have tried:
1. Downloading the management agent from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html
a. Running the ./runInstaller
b. It fails with missing .rsp files, I've touched .rsp files in order to get the installer to run
c. But it does not give me an option to install an agent, only an 'additional service'
2. The mass installer
a. I unzipped the agent .zip file into the appropriate directory on Server A
b. Modified the agentDownload.linux_x64 file
c. Copied the agentDownload.linux_x64 file to Server B
d. Run the agentDownload script, with -b option
i. The script downloaded some files from Server A
ii. The script quit
I can't seem to find any real documentation on how to do this that actually makes sense and works.
I only need to install the agent on a few servers, so I don't need any mass install, surely, how hard can it be?

Here is some output from agentDownload
[oracle@drora02 ~]$ scp -p prdgrid01.uto:/opt/oracle/Middleware/oms11g/sysman/agent_download/11.1.0.1.0/linux_x64/agentDownload.linux_x64 .
[oracle@drora02 ~]$ egrep '^(OMShost|httpPort)' agentDownload.linux_x64
OMShost=prdgrid01.uto
httpPort=4900
[oracle@drora02 ~]$ ./agentDownload.linux_x64 -b $ORACLE_BASE -dt
agentDownload.linux_x64 invoked on Tue Aug 10 09:52:23 EST 2010 with Arguments "-b /opt/oracle -dt"
Platform=Linux.x86_64, OS=linux_x64
GetPlatform:returned=0, and os is set to: linux_x64, platform=Linux.x86_64
Creating /home/oracle/agentDownload11.1.0.1.0Oui ...
LogFile for this Download can be found at: "/home/oracle/agentDownload11.1.0.1.0Oui/agentDownload.linux_x64081010095223.log"
Running on Selected Platform: Linux.x86_64
Installer location: /home/oracle/agentDownload11.1.0.1.0Oui
Downloading Agent install response file ...
Downloading Agent install response file ...
Executing wget_get_file http://prdgrid01.uto:4900/agent_download/11.1.0.1.0/agent_download.rsp
using the url http://prdgrid01.uto:4900/agent_download/11.1.0.1.0/ to access OMS
--2010-08-10 09:52:23-- http://prdgrid01.uto:4900/agent_download/11.1.0.1.0/agent_download.rsp
Resolving prdgrid01.uto... 10.200.200.36
Connecting to prdgrid01.uto|10.200.200.36|:4900... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `agent_download.rsp'
[ <=> ] 7 --.-K/s in 0s
2010-08-10 09:52:23 (570 KB/s) - `agent_download.rsp' saved [7]
Finished Downloading agent_download.rsp with Status=0
Response file check complete - Failed
Could not download through url . Trying secure download..
Executing wget_get_file https://prdgrid01.uto:4900/agent_download/11.1.0.1.0/agent_download.rsp
using the url https://prdgrid01.uto:4900/agent_download/11.1.0.1.0/ to access OMS
--2010-08-10 09:52:23-- https://prdgrid01.uto:4900/agent_download/11.1.0.1.0/agent_download.rsp
Resolving prdgrid01.uto... 10.200.200.36
Connecting to prdgrid01.uto|10.200.200.36|:4900... connected.
WARNING: cannot verify prdgrid01.uto's certificate, issued by `/O=EnterpriseManager on prdgrid01.uto/OU=EnterpriseManager on prdgrid01.uto/L=EnterpriseManager on prdgrid01.uto/ST=CA/C=US/CN=prdgrid01.uto':
Self-signed certificate encountered.
HTTP request sent, awaiting response... 200 OK
Length: 10008 (9.8K) [text/plain]
Saving to: `agent_download.rsp'
100%[===============================================================================================================================>] 10,008 --.-K/s in 0.005s
2010-08-10 09:52:23 (1.93 MB/s) - `agent_download.rsp' saved [10008/10008]
Finished Downloading agent_download.rsp with Status=0
Response file check Complete - Success
Checking the writable permission for baseDir - passed
If you wish to receive security updates, provide MYORACLESUPPORT_USERNAME in the <OMS_HOME>/sysman/agent_download/11.1.0.1.0/agent_download.rsp
If you do not want security updates, set DECLINE_SECURITY_UPATES to true in the <OMS_HOME>/sysman/agent_download/11.1.0.1.0/agent_download.rsp (or) invoke agentDownload with -y option
[oracle@drora02 ~]$ echo $?
1
And that is it, it stops there with no more information, and does not try to do anything further

Problem with the install of 11.1.0.1.0 Management Agent in silent mode

I have a server with the operation system windows 2003 and a installation WeblogicServer 10.3.2.
Now I like install the managemant agent for Grid Control on this server.
I use silent installation, because the in 11.1.0.1.0 Grid Control no longer supports a GUI-based OUI installation of the agent. (Reference : Master Note for Grid Control 11.1.0.1.0 Installation and Upgrade).
But the silent installation is not sucessfully.
I get following errors in the logfile:
oracle.sysman.oii.oiii.OiiiInventoryDoesNotExistException: Der Speicherort für den Bestandszeiger C:\Programme\Oracle\Inventory kann entweder nicht gelesen werden oder ist nicht vorhanden.
     at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1763)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:292)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:231)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:180)
     at oracle.sysman.install.oneclick.EMGCGetUpgradeableHomes.initInventorySession(EMGCGetUpgradeableHomes.java:401)
     at oracle.sysman.install.oneclick.EMGCGetUpgradeableHomes.getHomes(EMGCGetUpgradeableHomes.java:113)
     at oracle.sysman.install.oneclick.EMGCGetUpgradeableHomes.getInstance(EMGCGetUpgradeableHomes.java:103)
     at oracle.sysman.install.oneclick.EMGCUpgradeSelection.m_createupgradeTblSCrollPane(EMGCUpgradeSelection.java:252)
     at oracle.sysman.install.oneclick.EMGCUpgradeSelection.m_createMainPanel(EMGCUpgradeSelection.java:151)
     at oracle.sysman.install.oneclick.EMGCUpgradeSelection.<init>(EMGCUpgradeSelection.java:109)
     at oracle.sysman.install.oneclick.EMGCUpgradeSelection.getInstance(EMGCUpgradeSelection.java:123)
     at oracle.sysman.install.oneclick.EMGCWizardFlow.<init>(EMGCWizardFlow.java:315)
     at oracle.sysman.install.oneclick.EMGCWizardFlow.getInstance(EMGCWizardFlow.java:527)
     at oracle.sysman.install.oneclick.EMGCWizardFlow.main(EMGCWizardFlow.java:1103)
     at oracle.sysman.install.oneclick.EMGCInstaller.main(EMGCInstaller.java:1044)
ERROR: ERROR: E-Mail-Adresse nicht angegeben
ERROR: Vollautomatische Installation nicht erfolgreich. Weitere Informationen finden Sie im Log.
Can everybody help me?
Petra

Hi,
the directory c:\Programme\Oracle\Inventory exist.
I haven't no further files, in which informations for the silent installation are logged.
I think, the error "ERROR: ERROR: E-Mail-Adresse nicht angegeben" is the actual problem, but I don't like give the e-mail-adress,
because I use following command for the installation:
D:\>D:\oas_stage\GridControlAgent_111010\Win32_Grid_Control_agent_download_11_1_0_1_0\win32\agent\setup.exe -silent -responseFile D:\oas_stage\GridControlAgent_
111010\Win32_Grid_Control_agent_download_11_1_0_1_0\win32\agent\additional_agent.rsp -invPtrLoc C:\Programme\Oracle\Inventory
The contents of the additional_agent.rsp is following:
## copyright (c) 1999, 2010 Oracle. All rights reserved. ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## identifies the variable type. ##
## Please specify the values in the following format: ##
## Type Example ##
## String "Sample Value" ##
## Boolean True or False ##
## Number 1000 ##
## StringList {"String value 1","String Value 2"} ##
## The values that are given as <Value Required> need to be ##
## specified for a silent installation to be successful. ##
## This response file is generated by Oracle Software ##
## Packager. ##
RESPONSEFILE_VERSION=2.2.1.0.0
#Inputs for Oracle Configuration Manager
#SECURITY_UPDATES_VIA_MYORACLESUPPORT:<Boolean> Whether security updates are reqi-
# uired via My Oracle Support
#DECLINE_SECURITY_UPDATES:<Boolean> Whether security updates should be declined.
#MYORACLESUPPORT_USERNAME & MYORACLESUPPORT_PASSWORD:<String> User name and passw-
# ord for My Oracle Support access, these will be effected only when SECU-
# RITY_UPDATES_VIA_MYORACLESUPPORT=true
#COLLECTOR_SUPPORTHUB_URL:<String> If there is not direct connection and Support
# hub is deployed. Need to specify that URL.
SECURITY_UPDATES_VIA_MYORACLESUPPORT=False
DECLINE_SECURITY_UPDATES=False
#[email protected]
#MYORACLESUPPORT_PASSWORD=no
#COLLECTOR_SUPPORTHUB_URL=<Value Unspecified>
#PARAMETERS FOR SOFTWARE UPDATES
#INSTALL_UPDATES_SELECTION:<String>
# Option 1. If you want to skip the software updates, provide
# INSTALL_UPDATES_SELECTION="skip"
# Option 2. If you have already downloaded the updates then provide
# INSTALL_UPDATES_SELECTION="staged"
# If you choose the Option 2 then make sure you also provide STAGE_LOCATION.
#STAGE_LOCATION:<String> Stage location for software updates. It will be effected
# only when INSTALL_UPDATES_SELECTION is set to "staged"
INSTALL_UPDATES_SELECTION="skip"
STAGE_LOCATION=<Value Unspecified>
#PROXY DETAILS FOR SECURITY UPDATES/ SOFTWARE UPDATES
#PROXY_USER:<String> User name for proxy access.
#PROXY_PWD:<String> Password for proxy access.
#PROXY_HOST:<String> Server providing proxy access.
#PROXY_PORT:<String> Port for proxy access.
PROXY_USER=<Value Unspecified>
PROXY_PWD=<Value Unspecified>
PROXY_HOST=<Value Unspecified>
PROXY_PORT=<Value Unspecified>
#Various inputs required for Installation and Configuration
#ORACLE_AGENT_HOME_LOCATION:<String> The location of oracle agent home.
#Agent home "agent11g" would be created under the directory specified by
#ORACLE_AGENT_HOME_LOCATION.
ORACLE_AGENT_HOME_LOCATION=D:\Oracle
#DEINSTALL_LIST:<StringList> List of components to be deinstalled during a
# deinstall session.The following choices are available. The value should
# contain only one of these choices.The choices are of the form
# Internal Name, Version : External name. Please use the internal name and
# version while specifying the value.
# oracle.sysman.top.agent, 10.2.0.0.0 : Oracle Management Agent 10.2.0.0.0
# oracle.sysman.top.em_seed, 10.2.0.0.0 : Oracle Enterprise Manager Repository Database 10.2.0.0.0
# oracle.sysman.top.oms, 10.2.0.0.0 : Oracle Enterprise Manager Grid Console 10.2.0.0.0
DEINSTALL_LIST={"oracle.sysman.top.agent","11.1.0.1.0"}
#b_silentInstall:<Boolean> The user should not change this value
#CLUSTER_NODES:<StringList> This variable represents the cluster node names
# selected by the user for installation.
b_silentInstall=true
#CLUSTER_NODES=<Value Unspecified>
#TOPLEVEL_COMPONENT:<StringList> The top level component to be installed in the
# current session.Value should contain only one of the following available
# choices.The choices are of the form Internal Name, Version : External name.
# Please use the internal name and version while specifying the value.
# oracle.sysman.top.agent, 10.3.0.0.0 : Oracle Management Agent 10.3.0.0.0
# Example: TOPLEVEL_COMPONENT = {"oracle.sysman.top.agent","10.3.0.0.0"}
TOPLEVEL_COMPONENT={"oracle.sysman.top.agent","11.1.0.1.0"}
#SELECTED_LANGUAGES:<StringList> Languages in which the components will be installed.
# The following choices are available. The value should contain only one of
# these choices.The choices are of the form Internal Name : External name.
# Please use the internal name while specifying the value.
# en, : English
# de, : German
# es, : Latin American Spanish
# es_MX, : Mexican Spanish
# es_ES, : Spanish
# fr, : French
# fr_CA, : Canadian French
# it, : Italian
# iw, : Hebrew
# ja, : Japanese
# ko, : Korean
# pt_BR, : Brazilian Portuguese
# zh_CN, : Simplified Chinese
# zh_TW, : Traditional Chinese
#Example: SELECTED_LANGUAGES = {"en"}
#SELECTED_LANGUAGES={"en"}
#COMPONENT_LANGUAGES:<StringList> Languages in which the components will be installed.
# The following choices are available. The value should contain only one of
# these choices.The choices are of the form Internal Name : External name.
# Please use the internal name while specifying the value.
# en, : English
# de, : German
# es, : Latin American Spanish
# es_MX, : Mexican Spanish
# es_ES, : Spanish
# fr, : French
# fr_CA, : Canadian French
# it, : Italian
# iw, : Hebrew
# ja, : Japanese
# ko, : Korean
# pt_BR, : Brazilian Portuguese
# zh_CN, : Simplified Chinese
# zh_TW, : Traditional Chinese
#Example: COMPONENT_LANGUAGES = {"en"}
COMPONENT_LANGUAGES={"en"}
#OMS_HOST:<String> OMS host info required to connect to OMS
#OMS_PORT:<String> OMS port info required to connect to OMS
#AGENT_REGISTRATION_PASSWORD:<String> Agent Registration Password needed to
# establish a secure connection to the OMS.
OMS_HOST=sidk-vswo14.smi.sachsen.de
OMS_PORT=4889
AGENT_REGISTRATION_PASSWORD=gc11agent
#s_agentSrvcName:<String> Sets the agent Service Name and this variable can be
# used to overrite the agent service name calculated by the install. This is
# required for only Windows.
# Example:
# s_agentSrvcName = "Oracleagent11gAgent" ; default value
# s_agentSrvcName = "GridAgent"      ; User specified value
#s_agentSrvcName=""
#Please Don't change the values of these variables
#FROM_LOCATION:<String> Complete path to the products.xml.
#b_upgrade:<Boolean> "whether it is Upgrade or not"
#EM_INSTALL_TYPE:<STRING> install type
FROM_LOCATION="../stage/products.xml"
b_upgrade=false
EM_INSTALL_TYPE="AGENT"
Regards Petra

When should ZEN Management agent be installed

I use a standard image that is pushed out with ZEN imaging. This contains
the ZEN Management agent as part of the build. Therefore, there are a few
areas in the registry (under
HKEY_LOCAL_MACHINE\SOFTWARE\Novell\Workstation Manager) that are specific
to the machine that the image was built on. Primarily of concern are the
following two strings:
STRFileName="00B0D069CF85_1105073267000"
SystemGUID="00B0D069CF85172.22.175.1371105073290"
Any PC that gets this image will therefore get these same registry
strings, and this causes errors on the inventory side of things. I have
tried a combination of deleting these keys and / or their values with no
luck, as "STRFileName" and "SystemGUID" do not recreate or repopulate with
data from the new PC. Therefore in order to get the PC working with
inventory, I need to remove the management agent, and then reinstall and
then all works fine (as these keys are repopulated with data specific to
the local PC, and not the PC the image was created on).
Question: Does this mean that in future my images should not include the
management agent (i.e. it is a post install step), or is there a way
around this problem?
Thanks

I found that when the management agent is installed, the following
relevent entries are placed in the registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Novell\Workstation Manager]
"Registration Agent"="zenwsreg.dll"
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Novell\Workstation Manager\InvScanner]
@=""
"ScannerPath"="C:\\Program
Files\\Novell\\ZENworks\\Inventory\\NTScan32.exe"
Rebooting creates additional registry entries in this area, even when
logging in as 'workstation only', and these new entries contain specific
information about the PC. Ensuring that any image I use contains only the
above registry settings (and not any additional ones) means that the
workstation specific entries are generated correctly (when the newly
imaged PC is first booted up) and all works fine. To do this I used a bit
of vbscript as part of the image build, and this is the last thing done
prior to shutting down the PC and creating the ZEN Image.
[HKEY_LOCAL_MACHINE\SOFTWARE\Novell\Workstation
Manager\PredesktopHelperDLLs]
"WMPM.DLL"="WMPM.DLL"
"WMPOLHLP.DLL"="WMPOLHLP.DLL"
"WMPRTNT.DLL"="WMPRTNT.DLL"
"WMUSPOL.DLL"="WMUSPOL.DLL"
"WMGRPPOL.DLL"="WMGRPPOL.DLL"
> On Fri, 07 Jan 2005 06:05:47 GMT, [email protected]
> wrote:
>
> > Question: Does this mean that in future my images should not include
the
> > management agent (i.e. it is a post install step), or is there a way
> > around this problem?
>
> the strfilename will be recreated when you run an inventory..
>
> the wksid should be recreated when you import the wks..
> --
>
> Marcus Breiden
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

How to install and configure management agents on Tru64 Cluster

We are busy rolling out the Oracle 10g Grid Control to our enterprise and one of our targets is a two-node Tru64 cluster with shared file systems, i.e., each node can see (read/write) the file systems concurrently. Trucluster software is responsible for the clustering management.
On node1 we have a set of databases each with its own dedicated listener; the same for node2. Each cluster managed service set has its own logical hostname. For example, we have on node1:
db1 (database)
listener-db1 (listener for db1)
node-db1 (logical hostname for db1 service)
Upon switchover or failover, the database and listener are brought up on node2 and we need to cater for this in our management agent configuration. I am trying to work out how we install and configure the management agents in such a configuration. Has anyone done this or does anyone know how to set up the agents suitably?
I have already installed the agent on one of the nodes - that worked fine, and I have even managed to start another agent up using the installed software home on the other node using "agentca -f"

You the Cluster type of configuration. It is documented in the install guide you have

Packages error while installing Oracle Management Agent.

Hi,
We have configured the oracle grid on our production server.
Now we also want to include all other database on situated on different server.
So we are installing oracle management agent software.
while installiing this software we encounterd following error:
Exception in thread "main" java.lang.Unsatisfied LinkError :/tmp/OraInstall2011-05-04_10-05-58PM /jre/1.4.2/lib/i386/libawt.so :libXp.so.6 :cannot open shared object file:
No such file or directory.
Please help me as this is urgent.
Regards,
Milan

You need to install libXp package.
The rpm which contains this package is libXp-1.0.0-8.i386.rpm. It is located in the /server direrctory of the OS install DVD. You copy this rpm from the DVD and install it using
# rpm -ivh libXp-1.0.0-8.i386.rpm
or if you have setup yum or up2date repository:
yum install libXp.i386

Installing a Grid Management agent on AIX 5.3

I have downloaded the Grid Management Agent 10.2.0.3.0 for Oracle 10G from the oracle downloads website and installed on one of my AIX servers but after running through the installation the server does not show up in Grid Control.
Our Grid Control is running on RH4 server.
The platform of the host server i am attempting to install the agent on is AIX5.3
I downloaded and unzipped the following file AIX_Grid_Control_agent_download_10_2_0_3_0.zip
I ran the i./runInstaller from the aix/agent directory no errors reported however when I did this it did not show me a OUI page as I expected where I could insert Grid hostname etc
I assumed after running the installer I would then see the target host appear in my grid control server but no servernmae/agenst/db appears in grid control for this host
I have read a plethora of help/installation files on this subject matter and there seems to be a variety of different ways users are saying to install.
Some WebPages/help files say simply run the installer from the root directory of the Enterprise Manager DVD others give a completely different way of installing.
Can anyone who has successfully loaded on a Grid Management Agent give me any pointers as to:
1 – Why my installation appears to have failed
2 – A stepe by step guide on what users need to be added if any, what account I should install under etc

sorry it has taken me time to post back.
Below is the information you requested
/etc/oraInst.loc = 12th May
inventory_loc=/u01/app/oracle/oraInventory
inst_group=oinstall
/u01/app/oracle/product/10.2.0/oraInst.loc = 12th May
inventory_loc=/u01/app/oracle/oraInventory
inst_group=oinstall
/u01/app/oracle/product/10.2.0/oraInst.loc = 12th May
inventory_loc=/u01/app/oracle/oraInventory
inst_group=oinstall
/u01/app/oracle/product/10.2.0/TESTSERVER_DATABASE/oraInst.loc = 12th May
file contains
inventory_loc=/u01/app/oracle/oraInventory
inst_group=oinstall
Once again thanks for the assistance

Installing Management Agent

Similar Messages

Maybe you are looking for