Installing matlab using wine software
I have windows set up for matlab 2010a . How can i install that in my macbook pro using wine software.
FWIW, my advice is forget Wine (for this purpose). If you need to run the Win version, use Boot Camp. Why not check with MathWorks about the Mac version. The student licence should allow you to install it on two computers -- maybe you can make it 1 Mac and 1 Win…
Similar Messages
-
Installing and using different software on different computers of Master collection simultaneously
Question:
If i purchase the "Adobe Creative Suite 6 Master Collection",
Can i install and use the different software on different computers simulataneously?
example:
Can i use photoshop cs6 on machine 1
and then illustrator cs6 on machine 2
and then indesign cs6 on machine 3
all simulataneously?
ThanksNo. It's not possible. You have 2 activations that are valid for all apps and that is that. Read the EULA
Mylenium -
I have had to re-image my IMAC 3x now due to poor performance. Every time, I have to reinstall iWork using my software download key - and for some reason, I cannot find where to do that on the Apple website. Can anyone help ? and if you can't, anyone want to buy a 4 year old iMac ??
Did you do this download at the Apple Online Store? If so then you can examine the information in your account including invoices of prior purchases. Perhaps you'll find it there. You can also locate all your prior product registrations that you've made starting here.
-
Install Bootcamp using Win XP Pro upgrade using a twisty tie
Seriously, I tried everything but when I opened my Mac Pro and realized that the superdrive has an open/close button, I figured out how to open the drive during installation of XP upgrade and insert my older OS disc.
I have the step-by-step instructions here:
http://alejandroramirez.blogspot.com/2006/12/installing-bootcamp-on-mac-pro-usin g.html
Mac Pro Mac OS X (10.4.8)Hi Alejandro,
That is a great tip, I wish somebody could figure out trick like that for MacBook.
Mucho gracias for the tip. -
Can you install and use the software "infuzer" with IPad
Can someone advise if yo can do the above, and if so how?
Only if it is available in the App Store.
-
Error installing 11gR1 using Response file on Win 7 b/c version 6.1 not 6.0
Hi everyone, I am hoping someone can help me, I searched the forum but I couldn't find anything similar to the problem I am having.
I have just got a new laptop with Win 7. I have the 11gR1 64bit Oracle download files and I am trying to install it using the command prompt with --responsefile.
The install fails when it is doing the prereq checks for checking CertifiedVersions. I know if I just executed setup.exe and went through the screens I could bypass this, but I need to install it with my response file. Anyone know how I can get around this?
Here is the output from the install:
================================
Starting execution of Prerequisites...
Total No of checks: 11
Performing check for CertifiedVersions
Checking operating system requirements ...
Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: Oracle Database 11g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
========================================================
Performing check for ServicePackChecks
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Check complete: Not executed <<<<
OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
Recommendation: Install the recommended Service Pack.
..... rest of log file removed .....
=========================================
Thanks in advance!Hi;
Microsoft Windows 7 certification will begin with Oracle Database 11gR2 (11.2.0.x). That means, Oracle Database 11gR2 will be the first Oracle Database product certified/supported with Microsoft Windows 7.
You need to download 11gR2 (11.2.0.x).
For details:
Is Microsoft Windows 7 certified to install/run Oracle Database Server/Client ? [ID 952302.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios -
Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT
Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback. -
Using Win 7 and latest download of iTunes, the software will not recognize my music CDs when inserted in my DVD drive. I put a CD in the drive and nothing happens. iTunes does not have a "start" button, or some menu option to tell it to begin copying music to the library, so it just sits there. When I first installed iTunes, it would open the CDs, but I would get an error message after the first track started to transfer. Now, after a coupel uninstalls, disc cleanup, etc., nothing happens when I insert the CD. I am lost here and about to sell my new Ipod Classic because it is useless to me. Maybe I'm just too old to own something like this? Any (serious) suggestions would be appreciated.
In iTunes, do Store->View my AppleID
Click "Deuthorize ALL"
Then, on any computers you still have, do Store->Authorize this computer. If there are less than 5, you will have no problem.
You can only do "deauthorize all" once a year, so in the future, if you ever throw a computer away, remember do to "Store->Deauthorize this computer" first. -
I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help
You might find this article helpful: http://support.apple.com/kb/TS3694
It has the error range of 3000's which states
Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. Error 3194 most likely indicates you do not have the latest version of iTunes installed Update to the latest version of iTunes. -
Cannot install drivers in win 7 32 bits using bootcamp 4 or 5
I posted this question yesterday.
anyway, I have a imac midi 2011, 21,5 inches using OS x mountain lion 10.8.2. Manuals say I have to install bootcamp 4, because I install windows 7 profesional 32 bits.
Al follow all this instalation requirements, but when I try to install system say This software is not compatible.
I Downloaded from appel suppor site to PC intel and after I copy the .zip file in a root of USB formatted in FAT 32.
Finally is not possible download any driver. I I want to install an specific driver, is same problem.
I did all this steps but downloading bootcamp 5, and got same results. I understood Bootcamp 5 is only to install win 8 o win 7 64 bit, am I right?
Thanks for your help
GilbertoTo teh best of my knowledge, Boot Camp 5 only supports 64 Bit Windows installations (as it is designed for 64 bit hardware). I dont recall positively, but I believe that Boot Camp 4 supports both 64 bit and 32 bit windows installations, but the installer may default to 64 bit mode. You may have to extrace the drivers and install them manually in 32 bit mode.
-
When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill MartinI can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu. -
when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chrisRefer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299 -
How do I block this msg from always popping up "iTunes requires Safari 4.0.3 or later to be installed to use the iTunes Store within iTunes. Use Software Update to download and install the latest version of Safari". I cannot download this software bc my lap top is to old. The msg literally pops up everytime I make any moves on itunes and is VERY annoying.
I have a 2006 MacBook with an Mac OS X version 10.5.
In that case, try downloading a Safari 5.0.5 for leopard from the following location:
http://www.apple.com/safari/download/ -
When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?
Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.
Maybe you are looking for
-
I just downloaded the 8.1 version. It was a 30+mb file. Previously I ran 4.0. So I drag the new Firefox icon into the Apps folder. It does its merge thing with the old version. Problem is when I click to open FF now, it always throws up this window a
-
How do I add more things to my notification centre? Like stocks?
This is all I have on my notification centre! Can I add more like on the website?
-
Exchange 2010 to 2013 migration: Mailbox move requests are journaled.
Hello, I've installed Exchange 2013 into Exchange 2010 infrastructure [ single Exchange 2010 server; single AD site; AD = 2003 ], Exchange 2010 has 2 databases: 1. Database with users mailboxes; Journaling YES: Journal account. 2. Database with 1
-
Why my gradient mask at home renders smooth, but is clipped at work?
I created a number of gradient masks applied to images with a basic 100 to 0 black gradient, on my Mac at home. They look smooth in Illustrator, and rendered smooth both as a PDF and exported to a PNG. Gradient Mask from my Mac at home: But when I op
-
I don't get it -- I've watched lots of tutorials that show me how to rename my photos, but how do I use automator to render a portion of a timeline into a 'iPod video and iPhone 640x480.m4v' file? Instead of choosing file>export using compressor and