Installing MDM 7.1 - "AKK 710 SAP INSTANCE FRAMEWORK" missing
Hi,
I am trying to install MDM7.1 while installing I am being asked for a kernal file "AKK 710 SAP INSTANCE FRAMEWORK". I searched for this file on SMP and could not find this file. I am being asked for the same file while I installing MDM for SRM too. Can some body help me how to fix or we to get this file from? Please provide me link for the file.
Thanks
Hi,
that looks like a bug. I had a similar problem with installing the layout server. The problem persisted still in 7.1 SP01. I would suggest to open an OSS message.
Best regards
Christian
Similar Messages
-
IPC 4.0 - installing on a server with no SAP instance
Hello all,
as part of a hardware migration, I want to re-install IPC 4.0.
Currently IPC resides on the same server as our SRM4.0 system.
In the new setup IPC will reside on its own server with no other SAP installations (and therefore no SAP gateway).
I am trying to test this scenario by connecting to our current test system, but the RFC connections to IPC from SM59 don't work.
Does anyone know a way of making this work?
I presume I could install a standalone SAP gateway on the same server as IPC, but I would like to know if there are other options?
I've tried adjusting the dispatcher.properties file, but SM59 connection still doesn't work, so either I haven't created the right entries or I am on the wrong track.
Regards...JohnHi all,
Here are the settings from my dispatcher.properties file:
rfcEnabled=true
rfcGateway=10.xxx.xx.xxx:3301 (I've amended the actual ip address)
rfcDispatcherProgId=IPC_RFC_DISPATCHER
rfcServerCount=1
rfcServerProgIdPrefix=IPC_RFC_SERVER_
and here's the error I see in my IPCDispError.log:
Aug 6, 2009 12:00:18 PM com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug: Couldn't determine location of command GetPatchInfo in module SYSTEM
Aug 6, 2009 12:00:18 PM ....socket.server.dispatcher.RegisterMgr [main] Info: Contacting basis system
Aug 6, 2009 12:00:18 PM ....socket.server.dispatcher.GatewayInfo [main] Fatal: Dispatcher is configured to use active IPC dat
abase, but no database has been maintained. Please use the Administator UI to maintain a database.
Aug 6, 2009 12:00:18 PM ....socket.server.dispatcher.GatewayInfo [main] Fatal: No RFC connection available! Couldn't find out
how to ask a SAP system for my RFC gateways. RFC support disabled.
Aug 6, 2009 12:00:18 PM ....socket.server.dispatcher.RegisterMgr [main] Info: Dispatcher settings:
Try 1000 ms to ping an IPC server.
Don't contact IPC servers the next 20000 ms after a ping.
Use normal load balancing without any specialized servers.
Specialized servers are generalized to replace dead ones.
Load one leaves a server alone for 45000 msec.
RFC support is disabled.
Don't send mail about servers that are down.
regards...John -
SAP:AKK:710:UKERNEL:*:WINDOWS_X86_64
Hi.
i want to install SAP NetWeaver Application Server....
i get following message: " .... but need the label SAP:AKK:710:UKERNEL::WINDOWS_X86_64:"
how can i get that label?Marcus,
The label.asc file on each CD/DVD will tell you that information.
Also, you should check the media guide for the installation DVD(s) needed for any component selected.
http://service.sap.com/instguides
Hope this helps.
PJ -
How to script the discovery of installed SAP instances (Windows)?
Hi,
I manage like two dozen of servers, some of which are pure sandboxes for Basis Persons. I sometime come over and discover a Java add-on to an existing ABAP instance, a new instance running...
I have followed the many threads about scripting shutdown & startup of known instances and it's quite easy to do. I initially made some scripts on each server to address the installed instances, but as they change, it pretty much forces me to go back and adjust.
There must be a simpler way!
So I want to discover all the running SAP instances (SID) on a given server, then the system numbers attached to any existing SID. Once I can query this on a server, I will be able to stop all SAP instances properly.
So how do you script the discovery of installed SAP instances (SID) and their respective components (instance 0, 1, ...)?
For the record, I use Windows shutdown scripts to systematically run a script that stops SAP instances, so my Windows Admin friends can reboot the servers without concern. I use a conditional Windows startup script to start all SAP instances when Windows starts, only if we want it to (i.e. planned maintenance is a good idea to want SAP to start automatically, all other reboot is definitly not a good idea).Install something like Belarc Advisor and parse the resulting HTML
-
NW IdM Install on MS 2003 server with an existing SAP instance
All:
I have never worked with SQL server before and need help.
My Scenario:
I have an EP installed with SQL 2005 on Windows 2003.
I would like to install a NW IdM on the same server.
Coming from a unix/oracle environment, if I need two SAP systems on a single host, I would install two oracle instances and database and each SAP instance would point to its own home and database.
How does it work with SQL server. Will I have to install a new instance of the SQL server software and database and if so where would it be? Right now I see that the EP SAP instance, datafile, Tempdb and Logfile resides on the E:\ drive and I also see a C:\Program Files\Microsoft SQL Server. How does a "named instance" fit in my scenario?
Could someone help me understand?
Thanks
S.Hi Markus
And thanks to your answer, it helped me to succeed in this first step but unfortunately 1 minute later during the install process I have a new error telling me :
MDB-05042 Error while executing script "CREATE DATABASE BW3 ON PRIMARY ( name = 'BW3DATA1' , filename = ' C:\BW3DATA1\BW3DATA1.mdf ', size = 11000 FILEGROWTH = 60 )....... idem for BWDATA2 ......... idem for BWDATA3 MODIFY FILE encountered operating system error 112 while attempting to expand the physical file. CREATE DATABASE failed. Some file names listed could not be create.
Could you help me to solve this error . Thank you in advance. -
Configure VMServer and Migrate the SAP instances
Hi All,
We have already 5 instance installed on Windows 2008 SP2 Server (4 Processors & 64 GB RAM) and MS SQL Server 2008.
We are planning to configure VMWareand migrate all our instance to migrate to each V Machines
Please give some details, how to migrate all our instance into Virtual servers. I have gone through some of the documents, but i am not clear how to start.
Regards
PonnusamyHi All,
We are planning for Hyper-V based virtualization, which is inbuilt feature of Windows 2008 R2 Server.
Here is my server Configurations and sap instances on that server
HDD u2013 6TB
RAM - 64 GB
OS u2013 Win 2K8 R2
DB u2013 SQL Server 2K8 R2
SAP SRM 7.0
SAP MDM 7.1
SAP NW EP 7.01
SAP ECC IDES 6.04
SAP CE 7.2
SAP PI7.1 EHP1
Here are my doubts
1. When we enable the Hyper-V role and configure VM, Is there any change happens in Network or LAN settings
2. We plan to Homogeneous system copy to move SAP instance to VM
2. will it possible to run sap applications on Host machine and VM parallely.
3. What points I have to consider before starting Configure VM
Regards
Ponnusamy -
The SAP Instance JC00 fails to start on aIX box
Hi,
I am installing SAP Netweaver on AIX box.
The instalaltion process fails at the phase 33 of 34
the SAP Instance JC00 fails to start
if i chek the error fiel
Trace of system startup/check of SAP System DON on Tue Dec 26 16:00:51 CST 2006
Called command: /usr/sap/DON/SYS/exe/run/startsap
Starting SAP Instance JC00
SAP-R/3-Startup Program Rel 640 V1.8 (2003/04/24)
Starting at 2006/12/26 16:00:51
Startup Profile: "/usr/sap/DON/SYS/profile/START_JC00_pun-lpar-idm03"
(655470) SETENV LD_LIBRARY_PATH=/usr/sap/DON/JC00/j2ee/os_libs:
Setup Environment Variables
(655470) SETENV SHLIB_PATH=/usr/sap/DON/JC00/j2ee/os_libs:
(655470) SETENV LIBPATH=/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
Execute Pre-Startup Commands
(655470) Local: rm -f jc.sapDON_JC00
(655470) Local: ln -s -f /usr/sap/DON/JC00/j2ee/os_libs/jcontrol jc.sapDON_JC00
Starting Programs
(651450) Starting: local jc.sapDON_JC00 pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
(655470) Waiting for Child Processes to terminate.
(655470) **** 2006/12/26 16:00:56 Child 651450 terminated with Status 255 . ****
(655470) **** No more Child Processes to wait for.
(655470) Parent Shutdown at 2006/12/26 16:00:56
Execute Post-Shutdown Commands
(655470) Exiting with Return-Code 3. (No more child processes)
Startup of Instance failed
What can be the problem here
Regards
ManojHi Siddesh,
Thanks for the response
The trace is form the file dev_jcontrol located in "/usr/sap/DON/JC00/work" directory
"dev_jcontrol" 111 lines, 5297 characters
trc file: "/usr/sap/DON/JC00/work/dev_jcontrol", trc level: 1, release: "640"
node name : jcontrol
pid : 610394
system name : DON
system nr. : 00
started at : Tue Dec 26 19:12:38 2006
arguments :
arg[00] : jc.sapDON_JC00
arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties:/usr/sap/DON/JC00/SDM/p
rogram/config/sdm_jstartup.properties]
-> ms host : pun-lpar-idm03
-> ms port : 3601
-> OS libs : /usr/sap/DON/JC00/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host : pun-lpar-idm03
-> ms port : 3601
-> os libs : /usr/sap/DON/JC00/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
:$
trc file: "/usr/sap/DON/JC00/work/dev_jcontrol", trc level: 1, release: "640"
node name : jcontrol
pid : 610394
system name : DON
system nr. : 00
started at : Tue Dec 26 19:12:38 2006
arguments :
arg[00] : jc.sapDON_JC00
arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties:/usr/sap/DON/JC00/SDM/p
rogram/config/sdm_jstartup.properties]
-> ms host : pun-lpar-idm03
-> ms port : 3601
-> OS libs : /usr/sap/DON/JC00/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host : pun-lpar-idm03
-> ms port : 3601
-> os libs : /usr/sap/DON/JC00/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
Worker nodes
-> [00] sdm : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
[Thr 1] Tue Dec 26 19:12:38 2006
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 1] [Node: bootstrap] java home is set by profile parameter
Java Home: /usr/java14_64
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> java path : /usr/java14_64
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20060209 (SR4-1) (JIT enabled: jitc)
-> java vm vendor : Classic VM (IBM Corporation)
-> java vm type : <default>
-> java vm cpu : ppc64
-> heap size : 128M
-> root path : /usr/sap/DON/JC00/j2ee/cluster
-> class path : ./bootstrap/launcher.jar
-> OS libs path : /usr/sap/DON/JC00/j2ee/os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/DON/JC00/j2ee/os_libs/jstartup.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0035316
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout: 120000
JStartupStartJLaunch: program = /usr/sap/DON/JC00/j2ee/os_libs/jlaunch
-> arg[00] = /usr/sap/DON/JC00/j2ee/os_libs/jlaunch
-> arg[01] = pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
-> arg[02] = -DSAPINFO=DON_00_bootstrap
-> arg[03] = -file=/usr/sap/DON/JC00/j2ee/cluster/instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=9437188
-> arg[07] = -jvmOutFile=/usr/sap/DON/JC00/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/DON/JC00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/DON/JC00/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/DON/JC00/j2ee/os_libs:/u
sr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/tmp/sapinst_exe.360486.1167110312:/usr/lib:/usr/sap/DON/JC
00/j2ee/os_libs:/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/DON/JC00/j2ee/os_libs:/oracle/DON/102_64/bin:/usr/java14_64/bin:/home/donadm:/usr/sap
/DON/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/donadm/bin:/usr/bin/X11:/sbin:.
[Thr 1] JStartupICreateProcess: fork process (pid 274544)
[Thr 1] Tue Dec 26 19:12:55 2006
[Thr 1] *** ERROR => invalid return code of process [bootstrap] (exitcode=-1) [jstartxx_mt. 1433]
[Thr 1] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=-1)
[Thr 1] JControlCloseProgram: started (exitcode = -1)
[Thr 1] JControlCloseProgram: good bye... (exitcode=-1)
:q
pun-lpar-idm03:donadm 68> ls -lt
total 128
-rw-rr 1 donadm sapsys 329 Dec 26 19:12 INSTSTAT
-rw-rr 1 donadm sapsys 1323 Dec 26 19:12 sapstart.log
-rw-rr 1 donadm sapsys 5297 Dec 26 19:12 dev_jcontrol
-rw-rr 1 donadm sapsys 7556 Dec 26 19:12 dev_bootstrap
-rw-rr 1 donadm sapsys 615 Dec 26 19:12 std_bootstrap.out
-rw-rr 1 donadm sapsys 158 Dec 26 19:12 sapstart0.trc
-rw-rr 1 donadm sapsys 158 Dec 26 19:12 stderr0
-rw-rr 1 donadm sapsys 0 Dec 26 19:12 stdout0
-rw-rr 1 donadm sapsys 240 Dec 26 19:12 dev_sapstart
-rw-rr 1 donadm sapsys 0 Dec 26 19:12 dev_tp
lrwxrwxrwx 1 donadm sapsys 39 Dec 26 19:12 jc.sapDON_JC00 -> /usr/sap/DON/JC00/j2ee/os_libs/jcontrol
-rw-rr 1 donadm sapsys 0 Dec 26 19:11 dev_tp.old
-rw-rr 1 donadm sapsys 5519 Dec 26 17:32 dev_jcontrol.old
-rw-rr 1 donadm sapsys 7568 Dec 26 17:32 dev_bootstrap.old
-rw-rr 1 donadm sapsys 1045 Dec 26 17:32 dev_jcmon
-rw-rr 1 donadm sapsys 1045 Dec 26 17:32 dev_jcmon.old
pun-lpar-idm03:donadm 69> vi dev_bootstrap
"dev_bootstrap" 176 lines, 7556 characters
trc file: "/usr/sap/DON/JC00/work/dev_bootstrap", trc level: 1, release: "640"
node name : bootstrap
pid : 274544
system name : DON
system nr. : 00
started at : Tue Dec 26 19:12:38 2006
arguments :
arg[00] : /usr/sap/DON/JC00/j2ee/os_libs/jlaunch
arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
arg[02] : -DSAPINFO=DON_00_bootstrap
arg[03] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties]
-> ms host : pun-lpar-idm03
-> ms port : 3601
-> OS libs : /usr/sap/DON/JC00/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
Instance properties
-> ms host : pun-lpar-idm03
-> ms port : 3601
-> os libs : /usr/sap/DON/JC00/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
:$
-> debug mode : no
-> debug port : 60000
-> shutdown timeout: 120000
[Thr 772] JLaunchIStartFunc: Thread 772 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [bootstrap]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: -Djco.jarm=1
-> arg[ 3]: -Djco.jarm=1
-> arg[ 4]: -Dsys.global.dir=/sapmnt/DON/global
-> arg[ 5]: -Dapplication.home=/usr/sap/DON/JC00/j2ee/os_libs
-> arg[ 6]: -Djava.class.path=/usr/sap/DON/JC00/j2ee/os_libs/jstartup.jar:./bootstrap/launcher.jar
-> arg[ 7]: -Djava.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/DON/JC00/j2ee
/os_libs:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/tmp/sapinst_exe.360486.1167110312:/usr/lib:/usr
/sap/DON/JC00/j2ee/os_libs:/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
-> arg[ 8]: -Dmemory.manager=128M
-> arg[ 9]: -Xmx128M
-> arg[ 10]: -DLoadBalanceRestricted=no
-> arg[ 11]: -Djstartup.mode=BOOTSTRAP
-> arg[ 12]: -Djstartup.ownProcessId=274544
-> arg[ 13]: -Djstartup.ownHardwareId=F0052428966
-> arg[ 14]: -Djstartup.whoami=bootstrap
-> arg[ 15]: -Djstartup.debuggable=yes
-> arg[ 16]: -DSAPINFO=DON_00_bootstrap
-> arg[ 17]: -DSAPSTARTUP=1
-> arg[ 18]: -DSAPSYSTEM=00
-> arg[ 19]: -DSAPSYSTEMNAME=DON
-> arg[ 20]: -DSAPMYNAME=pun-lpar-idm03_DON_00
-> arg[ 21]: -DSAPDBHOST=
-> arg[ 22]: -Dj2ee.dbhost=pun-lpar-idm03
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x0x111179f20
=> Stack address = 0x111151b00
=> Stack low = 0x11114f200
=> Stack high = 0xffffffffffff470
=> Stack Trace:
pthread_kill() at 0x90000000040d2b4
praise() at 0x90000000040ccec
raise() at 0x900000000049c50
abort() at 0x900000000073eb0
GetPropertiesMD() at 0x900000004267774
ciCreateJVM() at 0x9000000042ff824
JNI_CreateJavaVM() at 0x90000000429329c
JHVM_LoadJavaVM() at 0x1000918d4
JLaunchIStartFunc() at 0x10008bb14
pthreadbody() at 0x9000000003f92d8
!!! Invalid stack address encountered: 0x0
!!! Stack corrupted.
=> CPU Registers:
msr = 0xa00000000000d032 iar = 0x090000000040d2b4
ctr = 0xffffffff00418400 lr = 0xffffffffffffffff
xer = 0x00000000ffffffff cr = 0x0000000000000000
r00 = 0xffffffffffffffff r01 = 0x0000000111151b00
r02 = 0xffffffffffffffff r03 = 0x0000000000000000
r04 = 0xffffffffffffffff r05 = 0xffffffffffffffff
r06 = 0xffffffffffffffff r07 = 0xffffffffffffffff
r08 = 0xffffffffffffffff r09 = 0xffffffffffffffff
r10 = 0xffffffffffffffff r11 = 0xffffffffffffffff
r12 = 0xffffffffffffffff r13 = 0x0000000111153994
r14 = 0x0000000000000000 r15 = 0x0000000000000000
r16 = 0x0000000000000000 r17 = 0x0000000000000000
r18 = 0x0000000000000000 r19 = 0x0000000000000000
r20 = 0x0000000000000000 r21 = 0x0000000000000000
r22 = 0x0000000000000000 r23 = 0x0000000000000000
r24 = 0x0000000000000000 r25 = 0x0000000000000000
r26 = 0x0000000000000000 r27 = 0x09001000a1c9ea40
r28 = 0x0000000111153994 r29 = 0x0000000000000006
r30 = 0x0000000000000304 r31 = 0x0000000000000006
[Thr 772] ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux_mt.c 836]
:q
pun-lpar-idm03:donadm 70> /usr/sbin/lsattr -E -l sys0 -a realmem
realmem 1048576 Amount of usable physical memory in Kbytes False
pun-lpar-idm03:donadm 71>
pun-lpar-idm03:donadm 71>
pun-lpar-idm03:donadm 71> pwd
/usr/sap/DON/JC00/work
pun-lpar-idm03:donadm 72> ls
INSTSTAT dev_jcmon dev_jcontrol.old dev_tp.old sapstart0.trc stdout0
dev_bootstrap dev_jcmon.old dev_sapstart jc.sapDON_JC00 std_bootstrap.out
dev_bootstrap.old dev_jcontrol dev_tp sapstart.log stderr0
pun-lpar-idm03:donadm 73> vi dev_jcontrol
"dev_jcontrol" 111 lines, 5297 characters
trc file: "/usr/sap/DON/JC00/work/dev_jcontrol", trc level: 1, release: "640"
node name : jcontrol
pid : 610394
system name : DON
system nr. : 00
started at : Tue Dec 26 19:12:38 2006
arguments :
arg[00] : jc.sapDON_JC00
arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties:/usr/sap/DON/JC00/SDM/p
rogram/config/sdm_jstartup.properties]
-> ms host : pun-lpar-idm03
-> ms port : 3601
-> OS libs : /usr/sap/DON/JC00/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host : pun-lpar-idm03
-> ms port : 3601
-> os libs : /usr/sap/DON/JC00/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
:$
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=9437188
-> arg[07] = -jvmOutFile=/usr/sap/DON/JC00/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/DON/JC00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/DON/JC00/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/DON/JC00/j2ee/os_libs:/u
sr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/tmp/sapinst_exe.360486.1167110312:/usr/lib:/usr/sap/DON/JC
00/j2ee/os_libs:/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/DON/JC00/j2ee/os_libs:/oracle/DON/102_64/bin:/usr/java14_64/bin:/home/donadm:/usr/sap
/DON/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/donadm/bin:/usr/bin/X11:/sbin:.
[Thr 1] JStartupICreateProcess: fork process (pid 274544)
[Thr 1] Tue Dec 26 19:12:55 2006
[Thr 1] *** ERROR => invalid return code of process [bootstrap] (exitcode=-1) [jstartxx_mt. 1433]
[Thr 1] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=-1)
[Thr 1] JControlCloseProgram: started (exitcode = -1)
[Thr 1] JControlCloseProgram: good bye... (exitcode=-1) -
SAP instance dies when I try to make a change to the role and save
Hello Friends
I am an ABAP and XI guy, but am working on Enterprise Portal.
I have created an IVIEW (URL) and am trying to associate it with a user and role. I have created user and then when I try to assign role by clicking on AssignROles and then select a role and try to save, it consistently kills the SAP instance (dm36939 0) and this instance turns to yellow (instead of staying green). I have to restart this again. I have installed ECC and EP on this server and ECC (ABAP programs tables etc.,) works without any problem. EP also works most of the time, but consistently fails at this point as explained above.
I am not sure if there is any specific settings I should be looking at. Any feedback will be highly appreciated.
Thanks
RamNOone responded and so closing here to open it again in a relevant area.
-
Batch file creation for Sap Instance
Hi Experts,
We have migrated some of our Sap Instances from Hyper-v to new Servers... Our Hyper-v System contains six Instances with 00 Instance numbers. At the time we moved it to the newly installed server the Instance numbers got changed. As we have lot of users present in our system we dont want them to intimate about the changing of instance numbers.
So could anyone help me how to process further inorder that the newly installed server should work as a hyper v system with that instance numbers. We are thinking to create a batch file, so help me what commands we have to add in that batch file. And also tell me how that batch file runs.
Note : Db - Ms Sql
Thanks in Advance,
Krishna.MYou cannot have multiple systems on a server with the same system number.
System number is present in the profile, instance directory and also entries in the services file.
If you want to change the system number then you need to modify all these with the new system number.
If the users are connecting to the SAP system with the IP and system number then you need to inform them about the change in the system number and IP
Regards
RB -
Hi,
I am using SAP MDM 5.5 SP05. Can someone guide me on how to install MDM Java API.
I referred to many threads on SDN but couldn't get through any.
I have already downloaded the java API which has one .sca file and two folders, each has some .jar files and javadoc folder.
Kindly help on how should i go with it.
Regards,
Chintan ShethHi Chintan,
You wont install MDM Java API as u install your MDM server or client.
<b>What the use of the MDM Java API?</b>
1. Stand-alone Java Applications.
U can use MDM java API for your stand-alone applications that runs locally on your PC etc... For this you can import the MDM Java jar file into to the library of yourstand alone java application project.
2. J2EE Application or custom MDM iview in EP or SAP Webdynpro Apllication.
U can deploy the .sca file in the SAP WAS Java using the SDM client and u can extend the MDM Java API in your J2EE Application or custom MDM iview in EP or SAP Webdynpro Apllication
get back for help...
Regards,
Vijay -
Cannot stop SAP instance using stopsap command
Hi All,
I am trying to stop a SAP instance using the stopsap command as such:
stopsap name=PRD nr=01 SAPDIAHOST=SAPPRD
The instace failed to stop with the following error in the stopsap.log file
CreateNamedPipe for
SAPPRD\pipe\SAPPRD_01 Failed, Extended Error #2
CreateNamedPipe for
SAPPRD\pipe\SAPPRD_01 Failed, Extended Error #2
D:\usr\sap\PRD\SYS\exe\run\sapntwaitforhalt.exe=>sapparam(1c): No Profile used.
running D:\usr\sap\PRD\SYS\exe\run\sapsrvkill.exe SAPPRD_PRD_01
running D:\usr\sap\PRD\SYS\exe\run\sapntwaitforhalt.exe name=PRD nr=01 SAPDIAHOST=SAPPRD 3600
Can anyone help?
Regards,
LimHello,
Please try uninstalling and reinstalling the service
as explained in the following Note(Point 3):
142100 - NT: Problems with new SAP service as of Rel. 4.5B
CreateNamedPipe for
sapbon1s57\pipe\SAPT02_00 Failed,
Point 3 of this
You should uninstall the service by selecting:
'Uninstall Service + Unregister COM Interface'
Then reinstall the service by:
'Install Service + Register COM Interface + Start Service'
Make sure that you have called SAPSTARTSRV.EXE from a command prompt
from within the usr\sap\<SID>\kernel directory ! The startup user
should be <domain>\SAPService<SID>.
Also check you have up to date version of
sapntwaitforhalt.exe
regards,
John Feely -
How to make SAP Instance on Windows without SAPinst (manually)
Dear colleagues!
On unix platform It's usually more convenient for me to make an additional sap instance by manually copying of sapmnt, usr and a couple of others folders, making links, editing /etc/services. It's faster than running SAPINST (for me).
So the question is - how and what should I perform for making an instance, central instance as well on WINDOWS platform.
with best regards,
VladimirHi,
It is not recommended way to install SAP System without following Standard Installation Method. Please read concerned Official SAP Installation Guide and follow the standard procedure without inviting more complexities and headache.
Regards,
Bhavik G. Shroff -
Two SAP Instances (DEV & QAS) on singe windows host.
Dear Gurus,
I am planning to install the two seprate R/3 4.7 Enterprise Ext.200 SR1 (central) instances on one host ( windows 2003 Standard R2 server.)
**Server Configuration :-**
**CPU :- Intel Xeon 3.0 Ghz.**
**RAM:- 4 GB**
**HDD :- 380 GB**
**OS :- Windows 2003 Standard Edition R2 SP1**
**Database :- Oracle 9.4.0.1**
**SAP :- R/3 4.7E X 200 SR1(NON UNICODE)**
I have query related to
1)On above system configuration the two sap instances will run or not?
2) Oracle that I have to install oracle two times or Can I create two databases using the single oracle executable directory ?
3) If I have to install oracle two times then what configuration I have to do to connect to the database?
4)What about the Host names ? I have to define two host names ? How ?
5) What activities I have to perform post installation ?
Please help me on this.
Thanks & Regards,
Sachin SableHi Nilesh/Kaushal
Thanks for your support, I really appriciate it.
I had install the QAS instance successfully on one sever.
Now both QAS & DEV instances are up & running.
But I am facing problem while executing transactions related to database i.e st04,st03,db12,db02.
After executing this transactions I received followng dumps.
1) Runtime Errors DBIF_DSQL2_SQL_ERROR
Exception CX_SY_NATIVE_SQL_ERROR
Database error text........: "ORA-00904: "KEY": invalid identifier"
Triggering SQL statement...: "FETCH NEXT "
Internal call code.........: "[DBDS/NEW DSQL]"
2) Runtime Errors RAISE_EXCEPTION
Exception condition "DB_RELEASE_UNKNOWN" raised
Error analysis
A RAISE statement in the program "SAPLSORA" raised the exception
condition "DB_RELEASE_UNKNOWN".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
3)Runtime Errors BCD_ZERODIVIDE
Exception CX_SY_ZERODIVIDE
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_ZERODIVIDE', was neither
caught nor passed along using a RAISING clause, in the procedure
"SKOM_CT_PERF_BUF_REDO" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
In the current program "SAPLSKOM", an arithmetic operation ('DIVIDE',
'/', 'DIV', or 'MOD') with a type P operand attempted to divide
by 0.
4) Runtime Errors COMPUTE_BCD_OVERFLOW
Exception CX_SY_ARITHMETIC_OVERFLOW
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_ARITHMETIC_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"SKOM_CT_PERF_BUF_LIB" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
An overflow has been determined in the current arithmetical operation
containing operands of type P. Possible causes include:
1. The results field of type P is to small and the result does not fit
into it.
places.
2. The result or partial result has more than 31 decimal places.
Thanks,
Sachin -
SAP instance getting stop after some time....
Hi,
Installed SAP on Cluster .SAP runs fine before and after switchover cluster when we do manually.
Problems comes after scripting ,While starting SAP Instance with SCript its work fine but after some time instance get fail.
And error comes
15:09:55
/usr/sap/SID/SCS01/exe/sapcontrol -prot NI_HTTP -nr 01 -function Stop
05.03.2014 15:09:55
Stop
OK
15:09:57
Instance on host insapr3pi01 stopped
15:09:57
Waiting for cleanup of resources
And it stop instance after some time.We are using Veritas (VCS cluster).Its continously search for cleanup of resources!!!!!!!
Regards
AdilSap instance start by that script but after sometime it give message in cluster software that Waiting for Cleaning of Resources.And after sometime it shutdown that instance.
Hi Adil,
When an external application (in this case SAP NetWeaver) is clustered with VCS, there are options to execute scripts at various operation cycles of the VCS agent for the application in question. I would recommend reviewing the application group configuration, corresponding VCS logs, as well as the path to the scripts and their content.
I can assist from VCS perspective if the question still stands.
Regards,
Villi -
Two SAP Instances in High Availability cluster - SGeSAP - HPUX
Dear All
We want to install 2 SAP instances in single host with DB and CI separately. DB and CI will be on High Availabilty Cluster using SGeSAP for HP - Unix. The database is Oracle 10g.
Does SAP support multiple instance on the same hosts(DB and CI) for HA option.
Kindly inform
Regards
LakshmiYes it is possible to run two SAP systems on same cluster using SGeSAP. Normally If there is only one system on the cluster DB is configured on one node and CI is configured on the second node, with fail over in case of a node failure. In your case if a node fails one node will be running two DB and two CI instances. You have to size the hardware accordingly. Just FYI, SGeSAP is licensed per SAP System.
Maybe you are looking for
-
Why does iTunes fail to see that I am a customer
Why has it taken 20 days and iTunes still hasn'tfixed my account? Why have I ended up with two iTunes account instead of just one? Why are the people running the system so thick that the two accounts created god knows why both belong to the same pers
-
Generating a test result without a module
I have a basic question about generating a test result without calling a module in TestStand. For example, I do a pair of read operations from a product and return the results to a pair of numeric local variables. Now I want to do a sequence pass/fai
-
Can Not Use LAST Button to go Back to DVR Recording
My LAST button works fine from chanell to channel. I can be watching a DVR recording, and the box will go back to the live channel I was watcing when I hit LAST. If the LASt button is pressed again, it does NOT go back to DVR. I know with Comcast,
-
hello all, Iam going to have client round ,cna i know what are the questions asked areas regarding SAP HR implementations. thanks in advance. regards, hema
-
Can't switch to line-in - Mac insists on feeding microphone input to GB3
I'm running on a Mac Book Pro and I'm trying to use something other than the built-in mic for audio input. First I tried the line in - I know that a mic won't work (levels are different), so I got a Griffin guitar cable that is made to go into the li