Installing Mediagate with Mac

I cant anywhere on the Internet to give me instructions on how to install the Mediagate 350HD with a MAC.
I have downloaded the software and installed it but I still can not see the Mediagate on my computer. I am sure I have the wireless router installed and setup right (e.g. setup wireless component with password etc).
I am using an airport extreme router with my Mac in which I am trying to get the Media Gate to connect to.
Pleeease help - sooo frustrating!

I had purchased a Mediagate 350HD, and spent countless hours trying to figure it out. I was finally able to get it to work by enabling it as a FTP server, and then using FireFTP to transfer a movie to it, though, it never did actually show up on my mac. However, minutes later, I got the "blinking blue light of death" and my external HDD with all my media was suddenly unreadable! Those things are so buggy, I decided to not f*ck with it any longer, and I sent it back for good. I just ordered a mac mini to use as a media player, and while there still seems to be complications to overcome, in the end, it'll make far more sense than the MG. i did look extensively into getting an AppleTV, and it seems that if you have any hacking skills at all, you can get it to be way cooler than the mediagate, and for about the same price. The only reason I didnt get the ATV was that none of the Apple stores that I went to had a decent looking movie loaded to show the product off; the resolution looked horrible on every single one. anyway, sorry I cant be more help, there are plenty of tutorials and forums about hooking those suckers up. But I didnt have much luck with it!

Similar Messages

  • PSE 10 Install issue with Mac OS 10.6.8

    Hi,
    I'm having trouble installing a copy of PSE 10 on a Macbook Pro (Intel 2.4 GHz) with Mac OS X version 10.6.8.  I've tried downloading the software twice and get errors on both copies.  Here is the latest error:
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 23 error(s), 3 warning(s)
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
    ----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
    ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirJZhvRqio/Assets1/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" to "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" Error 0(Seq 1343)
    ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1343)
    ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts"(Seq 1332)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1332)
    ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL"(Seq 1152)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1152)
    ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required"(Seq 1098)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1098)
    ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
    ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
    ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
    The second downloaded version made it farther than the first on the installation.  It makes it to the installation of PSE 10 and then jumps from 60% installed to 98% and shows the above message.  This is getting really frustrating given that it takes me several hours to download a copy of this software.
    Any advice would be greatly appreciated.

    Hi Barbara,
    Thanks for the advice.  Unfortunately, it didn't work.  I deleted (and emptied the trash) of the Adobe folder in the Hard drive>library>application support folders, uninstalled the partial install of PSE 10 using Adobe's uninstall, turned off the antivirus software, and tried installing from a new administrative account.  Here is the error code from this most recent attempt.
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 23 error(s), 1 warning(s)
    ----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
    ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirSAstoywp/Assets1/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" to "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" Error 0(Seq 1343)
    ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1343)
    ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts"(Seq 1332)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1332)
    ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL"(Seq 1152)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1152)
    ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required"(Seq 1098)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1098)
    ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
    ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
    ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
    This computer has had some previous Photoshop versions migrated to it over the years (Photoshop 4.0 for OS 9, and Photoshop 7.0).  Photoshop 7.0 stopped working after I upgraded the OS from Tiger to Snow Leopard, and I no longer have the disks or serial number so that is why I'm trying install PSE 10.  Could these old versions (which I tried to delete, but did not have a specific uninstall version for) be a source of this issue?  If so, is there a way to make sure they're all gone?
    Thanks

  • Windows 7 Install Issues with Mac Pro

    I have Mac Pro with Windows XP SP3 installed with Boot Camp on a separate, dedicated 250GB HD.
    I purchased an upgrade version of Windows 7 Home Premium. I hoped to install the 64-bit version. I upgraded, per Boot Camp I&S Guide, Boot Camp to version 3.1. After Boot Camp upgrade, I mounted the Windows 7 64-bit installation disk. Since the Windows disk did not open automatically, I then attempted to open the Setup.exe file but got the following error message –
    “D:/setup.exe is not a valid Win 32 application.”
    I suspect the Boot Camp 3.1 upgrade was for the 32-bit Windows XP system currently installed and this caused Windows 7 (64-bit) not to open.
    If my suspicion is correct, would upgrading to Boot Camp 3.1 (64-bit) cause problems with the currently installed Windows XP? Any advice would be appreciated.

    I have since attempted to boot from the Windows 7 install disk by using both the OS 10.6.3 System Preferences/Startup Disk and from within Windows XP using the Boot Camp Control Panel. In both cases, all I saw was a black screen with a “Select CD-ROM Boot Type” and flashing cursor. No keyboard input was possible.
    If anyone encounters this problem, go to the Boot Camp/Installation and Storage discussion and search for “Select CD-ROM Boot Type”. Hal Jay Greene has an excellent article here titled “Select CD-ROM Boot Type Error installing Windows 7 in Boot Camp walkthrough” dated Mar 20, 2010 that walks one through the process of creating a boot disk for installing Windows 7 x64. Two minor comments on his discussion. John Anderson’s blog is at www.AndersonsHatch.com (note extra s) and Imgburn can be downloaded free from www.imgburn.com.
    I used Mr. Greene’s procedure and the resultant boot disk loaded Windows 7 correctly.
    Unfortunately, a new issue arose. Installing Windows 7 over Windows XP requires a clean install that eliminates all Boot Camp installations. After installing Windows 7, I attempted to load Boot Camp by inserting the Mac SL installation disk and clicking on Setup in the Boot Camp folder. The result was this error message: “Boot Camp x64 is unsupported on this computer model”. Fortunately, there is a procedure that worked for me, and my MacPro, to bypass this error message. It can be found near the bottom of this article http://blog.andersonshatch.com/2009/01/11/windows-7-x64-on-a-macbook-pro-guide/ on John Anderson’s blog.
    Message was edited by: johnshap

  • Can i install win7 with mac os X.4?

    i have mac Os X.4 installed on my macbook pro so i need to know i can if which boot camp is compatible with it to install win 7

    No version of Boot Camp besides a now-expired beta will run on Mac OS X 10.4. In order to run Windows 7 through Boot Camp, the computer needs to be upgraded to at least Mac OS X 10.6; Mac OS X 10.6 DVDs are available at the online Apple Store.
    (72185)

  • Reader X 10.1.0 Install Fail with Mac 10.6.7

    I am trying to install the latest reader on our MacBooks.  I tried the auto update and that failed.  I tried downloading and installing and that failed.  I removed the older version and same, then removed all traces including the library files and failed.
    This was done on multiple Macs and the results were all the same. 
    Any suggestions other than not updating?

    Hidden files?  I'm not sure how I would go about that?  I have removed the plist, preference, and support files associated with the program.  I removed them under the individual user, the system library, and the hard drive library.  I have had issues in the past with Air but it was related to creating the support piece under the user account.

  • Is Ms Office 11 already installed together with Mac os lion?

    Is Ms Office included in the new Mac OS lion?

    No. Office is not an Apple product. You have to purchase it from Microsoft. Only OS X is included with Lion. New computers come with iLife pre-bundled.

  • Installing WRT54G with Mac OSX and getting a password

    Ok, I just hooked up my wireless router to the internet modem (it's a motorola surfboard) and I believe my mac automatically picked it, now I'm am trying to add a password. How do I make sure my mac can pick it up and how can a program a password ? Thanks ! PS: I'm not very computer savy, so if it is at all possible to break it down into like installing a router for dummies that would be grat. Thanks !

    It does not matter for the Operating System ..... you can install the wireless router ....
    Open Safari browser .... type 192.168.1.1 ....leave username blank & in password use admin ...
    Click on the Wireless tab on the Setup page- Here Wireless Network mode
    should be mixed- Provide any non linksys network name ....
    Name (SSID) box- Set wireless channel to 11- And wireless SSID
    broadcast should be Enabled and then click on "Save Settings" >>Now
    Click on the Sub tab under wireless > "Wireless Security" Change the
    Wireless security mode to "WEP/WPA"...have a note of the key ... click save settings ...

  • How to unistall installed software with Mac OS X

    the message same to Subject

    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Most applications create preference files which are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can located them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.

  • Acrobat XI failed installation even after downloading program as well as trying to install from disc (Mac OS 10.10)

    Hello,
    Im trying to install acrobat XI on a macbook pro (OS 10.10) education edition
    I received the verification code registered with a serial number etc.
    However the installation keeps failing 'the installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
    are there issues installing this with  Mac OS 10.10?
    hoping for the best

    This issue is now resolved. The program told me that it failed on installation repeatedly - but in fact it did eventually work when I opened the document from the app folder.  I guess that is the elaborate rigormorle that adobe wants its customers to undergo but am happy it now works.

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • Adobe creative cloud set up to install on a mac with parallels windows 8

    Unfortunately it is not possible to install the program it always displays an error message. how can you loess the problem?
    error message: This application can not be run from a network drive-. copy it to a local folder and strarten it again.

    I have just the regular version, not Professional.
    I mean "les integrated", in the sense that you really run Fusion "in a window". The more "integrated" approach means that Windows applications run as if they were for the Mac, and you do not see the Windows interface at all. I personnaly think tjat is too confusing. There is nothing wrong with it, just a bit more confusing. i like having it clear that Windows is in a seperate Window.
    Op 21 nov. 2013 om 12:57 heeft Krishnam <[email protected]> het volgende geschreven:
    Re: adobe creative cloud set up to install on a mac with parallels windows 8
    created by Krishnam in Adobe Creative Cloud - View the full discussion
    Hi MacLesNL,
    Which version of VM Ware should I go for?
    http://www.vmware.com/uk/products/fusion/
    http://www.vmware.com/uk/products/fusion-professional/
    So that I could install Adobe CC on Windows 7? Please advise.
    What do you mean ny "less integrated"? Is this must to run Adobe CC in VMWare on Mac?
    Please advise.
    Thanks, Krishnam
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5861525#5861525
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5861525#5861525
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5861525#5861525. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Creative Cloud at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

    Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
    My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
    Please help!!!
    Thanks,
    Paolo

    Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
    Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
    Personally I think of all the issues possible its DVDSP vs QT.
    Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

  • I've lost the use of Appleworks in 10.9.2. Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other?

    I've lost the use of Appleworks by upgrading to 10.9.2.
    Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and  few other applications that aren't available on OS 10.9.2.
    Any suggestions?
    Thank you for your help.

    Hello again, WZZZ,
    Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
    Some thoughts:
    • The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
    • The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
    • If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
    So, all in all a good project that got me where I wanted to go. Thank you for your help.
    Appreciatively,
    wallah

  • MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue)  I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

    Hello (hopefully someone can shed some light on my issue)
    I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
    a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
    I restarted the machine and this time a flashing question mark folder!
    could not do a thing.
    so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
    so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
    After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
    (interestingly since the RAID card had been removed the RAID UTILITY  from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
    O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
    but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
    thanks for your help in advanced.

    hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar  problem some one else had!
    working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
    and try to restart, hoping all was fine, this was not the case :-(
    I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
    so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
    ...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
    (nvidia geforce 8800gt 2x dvi).
    I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
    Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
    from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
    carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
    what was the cost to get this?  bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
    and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

  • I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one ye

    I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one year. Then, I decided to change it to another computer, so I sisintalled it according to instructions. In the meantime I got a free trial of creative cloud on that computer, but I gave up and decided to reinstall my cd-roms. However, everytime I try to use acrobat for instance it says that my trial period ran out! I disinstalled my cloud products, I am using my registered full master series items, they have nothing whatsoever to do with my creative cloud FREE subscription. If I try to cancel my free membership, it is to no avail, there simply is no such possiblity. I want to use the software I paid dearly for, not the cloud items I disinstalled and which do not interest me. How can I contact Adobe to fix it? It was no fault of mine, I did all I was supposed to, disintalling items before installing the right ones, but the system must have some error i am not responsible for.

    open an app and click help>activate.
    if you try to open an app and see a 'your trial has expired" window, click license this software and enter your serial number.
    if you can't do either, run the cleaner and make sure cc is cleaned from your computer, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Maybe you are looking for