Installing medium-cost RAM on my Mac Pro

Hi everybody!
I've just bought a 2x 2.66GHz Mac Pro and it's wonderful. However, I ordered it with a minimum configuration because I thought I could find expansion pieces on the market.
Is there any problem if I install a 1GB-667-DDR2 RAM module non-ECC and unbuffered (it is to say, different from the ECC FB-DIMM from Apple, which seems to me TOO EXPENSIVE)?
I've read about heating > noise troubles, but I can't really believe them. Has anyone of you tested a medium-cost (e.g. Corsair) RAM module on a new Mac Pro? Does it give good results?
I didn't find problems when looking for a 3GB/s SATA HDD, but it's difficult and -above all- expensive to buy an Apple RAM module or other brands' ones with the same technology.
Can anybody help me, please?

Shima,
To quote from the Apple site for you on the performance benefits from symmetrical RAM configurations on Mac Pro.
The Mac Pro comes with two memory riser cards, each with four DIMM slots. With a total of eight slots, you can add up to 16 GB of memory. Memory DIMM pairs should be installed evenly on both risers. This table shows Mac Pro RAM configurations that will achieve ideal performance:
Riser A contains: Riser B contains:
2 x 512MB 2 x 512MB
2 x 1GB 2 x 1GB
2 x 2GB 2 x 2GB
4 x 512MB 4 x 512MB
4 x 1GB 4 x 1GB
4 x 2GB 4 x 2GB
Note: DIMMs must be installed in pairs of equal size from the same vendor. For instance, you must not have one or three DIMMs on either riser at any time. Additionally, two DIMMs from different vendors should not be combined and used as a pair.
From tests I've read around the web, filling the slots as Apple suggests achieves a 5-7% performance boost. Whether your MacPro would even recognise ram installed randomly, or in unmatched sizes is something I do not know.
Enjoy your MacPro, I am jealous.
G5 Dual 2ghz, 3.5Gb Ram, MacPro soon I hope.   Mac OS X (10.4.7)  
G5 Dual 2ghz, 3.5Gb Ram, MacPro soon I hope.   Mac OS X (10.4.7)  

Similar Messages

  • Can't install 32Go of Ram in my Mac Pro

    Hi Everyone,
    I own a 2012 Mac Pro actually running with 2 x 8Go of memory plus 6 x 2Go (these ones were provided by the reseller).
    When I bought the set of 8go, I picked 4 to upgrade to 32Go but it never worked, the Mac Pro couldn't see 32Go, only 16Go.
    I tried several slot configurations without any success.
    I sent the memory back twice to the reseller and had the same issue so I guess it's not linked to that but to the machine.
    Right now all my slots are filled with 2 x 8Go and 6 x 2Go and it works so I don't understand why I can't install 4 x 8Go.
    Any help or explanation welcome

    2009 thru 2012 use DIMMs that are different from the FBDIMMs used on older models.
    When larger DIMMs first became available, some of these were "Registered" DIMMs (they have an output buffer that holds the output longer). Experience showed that these did not mix and match with "Unregistered" DIMMs, but Blogs indicated that some different sizes did not mix and match correctly.
    So what you may be seeing is a mix of older and newer DIMMs, even in the same sizes, that are not compatible.
    No pairing is required. These Macs use slots 1, 2, and 3 independently. Slot 4 shares a channel with slot 3.
    To check new DIMMs when you receive them, remove ALL DIMMs from the machine, and populate slots 1, 2, and 3 with new DIMMs. Power up your Mac Pro to test. The error-correction Hardware will be used during power up to determine if ANY errors occur in the first minute of testing, and those DIMM slots will be marked "empty".
    Once you have determined the working status of your new DIMMs, the next part of the process is "what will work with what". This requires another complete pass using only known-good DIMMs trying different configurations until you find one that is reliable. You may find that some new or old DIMMs will not "play nice with others" and can make a sound decision of what to keep and what to reject.
    As you found out, this requires a very methodical, almost "driven" approach, or you end up sending everything back.

  • Can I install 32gigs of ram on the Mac book pro with retina display

    Can I install 32gigs of ram on the Mac book pro with retina display

    MacBook Pro with Retina display is not user upgradable.
    Apple says configurable to 16GB.
    http://www.apple.com/macbook-pro/specs/

  • Has anyone tried Kensington RAM in their Mac Pro?

    Has anyone tried Kensington RAM in their Mac Pro? I found this ram and that is far cheaper than OWC or apple.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820139940
    Please let me know what your experience has been with 3rd party ram.
    Lester

    NewEgg: " Memory returns allowed for 30 days, subject to 15 percent re-stocking fee. "
    So YOU are the expert about which are the correct modules. a mistake costs you 15 percent plus shipping.
    I prefer to do business with mac-centric vendor who lend me their expertise and tell me what memories work in my Mac, "Guaranteed or your money back."
    OWC is one that does business that way.
    Data Memory Systems does as well, and that is the outfit I use.
    The last 1333 8GB module like these I bought from them came with a large flat heatsink installed. I put it in my Server. The price has fallen a bit since then, and now they are asking US$78, but "Guaranteed."
    http://www.datamemorysystems.com/_apple_info/Apple_Mac_Pro_12-Core_Xeon_Westmere _2.93GHz_Memory_1632.asp

  • Can't install Bootcamp on a 4,1 Mac pro

    Greetings !
    I'm trying to install bootcamp on my 4,1 Mac pro but i'm experiencing a weird issue....
    First of all, here's the summary of the machine :
    Macpro 4,1 2x2,26ghz quad core xeon, 6gb ram, intel 335 ssd plugged in the optical drive bay, and a bluray burner...Mountain Lion is 10.8.5...I removed my 2 additional cards (a decklink HD extreme and a sonnet e-sata "tempo" controller)....I added a second drive in the bay #1 (an apple seagate 250gb which was originally in the mac pro)...
    1st weird thing : my smc version is 1.39F5....I downloaded the 1.4 (which is the latest for 4,1 MP) on Apple website but it won't install, displaying "your computer doesn't need that update"...
    2nd weird thing : I succed in launching windows ( win 7 professional 64 bits edition) installation, i can then format the volume in ntfs within the installation program....BUT...After a while it copies and expands installation files, and really starts the installation (devices detection, etc)...And that's when it hurts...I can have either a BSOD with "bugcode_driver_error" , either the computer restarts and says the installation can no longer continue and I need to start all over...I have an iMac and could install windows on it without a glitch....I tried 2 differents dvd : the windows official, and an optimized (with windows updates slipstreamed inside) a friend made...No go.....I'm gonna need a bunch of softwares on windows pretty quickly for my job....
    Do you guys have any idea ? I'm starting to run off of any fresh of 'em
    Thank you a lot in advance for your help, and happy season from Paris
    Dirk

    If you bought a retail copy of Tiger & are not using it for another Mac, you do hold a Tiger OS license you could transfer to your brother legally. However, your brother still will need disks that install the PPC version of the OS for it to be installed on the G4, & for troubleshooting or some maintenance tasks. Intel-specific installer disks do not meet this requirement.
    If you can document your purchase (like if you have a receipt for it from an authorized Apple dealer or the proof-of-purchase certificates) you may be able to purchase a replacement disk through Applecare.

  • Yosemite failed to install   now i cannot get into mac pro

    yosemite failed to install   now i cannot get into mac pro  MacBook is 2012 8g ram  750 g hard drive    processor i'm  not sure     I tried disc utilities called for but  it would not allow disc repair

    Did you purchased the Full Perpetual License from Adobe for $149.00?, if so then what has happened is that you probably downloaded the Creative Cloud trial version which has now expired.
    The license key for the perpetual version will not be accepted to activate the CC version.
    Uninstall the existing Lightroom and then download the one available from the link below. The uninstall process will not affect your Catalog, Preferences or personal files but will just remove the application. Install the new download and you license key will be accepted.
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.6
    If this is not the situation you face then provide some more details.

  • Is it possible to install Nvidia Titan Z card in Mac Pro Mid 2010 ?

    Hello
    I would like to now i if change pci-express power supply cables on mac motherboard from 2x 6pin to 2x8pin would it be possible to install Nvidia Titan Z card in Mac Pro Mid 2010 ?

    September 13th, 2013 -- CRAZY FAST GPUs for Mac Pro:
    GeForce GTX Titan and 780
    July 25th, 2014 -- GeForce GTX 780 6G
    : Mac Pro Tower 'Sweet Spot'?
    January 29th, 2015 -- GeForce GTX 980 vs 9 other GPUs
    running Resolve, LuxMark, and Octane Render
    Mac Pro with GeForce Titan and GTX 780
    Food for thought if you are tight on slots and power feeds. 2. The Titan and GTX 780
    barefeats.com/gputitan.html
    GeForce GTX 780 6G: Mac Pro sweet spot?
    We'll explain after you peruse the graphs. GRAPH LEGEND TITAN Black = GeForce GTX TITAN Black with 6G ... 780 Ti and TITAN Black but costs ... for your existing TITAN or 780.
    barefeats.com/gpuss.html
    2013 Mac Pro 8-Core vs 2010 Mac Pro 8-core
    R9 280X GPU MPt 8c TITAN = 'early 2009' Mac Pro Xeon X5570 @2.93GHz 8-Cores with GeForce TITAN GPU LuxMark 2.1 is an ... Pro were superior to the single TITAN and single R9 280X in all
    barefeats.com/tube11.html
    Games: 6-core 2013 Mac Pro versus 6-core 2010 Mac Pro tower
    Village run collecting average FPS with Titan Performance .
    barefeats.com/tube18.html
    iMac 2013 - Games, gaming, gamer
    We also tested some of the games running the GTX 780 and Titan. .
    barefeats.com/haswel3.html
    Mac Pro 12-core 3.46GHz tower, dual 'FirePro' GPUs
    Anandtech , it rivals the speed of the NVIDIA GTX TITAN at a fraction ... 200.
      barefeats.com/mp12c346.html
    DaVinci Resolve and 2013 Mac Pro
    X compatible GeForce GTX Titan can be purchased from MacVidCards .
    MacVidCards recommends a supplemental power
    barefeats.com/tube10.html

  • I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

    I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

    Generally, it's ok to install on two machines as long as they are both yours and you only use one version at a time.
    BTW, this is the forum for Adobe Contribute.

  • Can I install Windows 7 on my new MAC Pro running OSx 10.9

    Can I install Windows 7 on my new MAC Pro running OSx 10.9.  BootCamp Assistant states Windows 8 or later.  Help please!

    Neil already gave you the answer. Here is the table repeated in case you accessed the wrong location.
    Mac model
    Windows 8, 64-bit
    Windows 7, 64-bit
    Windows 7, 32-bit
    Windows Vista, 64-bit
    Windows Vista, 32-bit
    Windows XP, 32-bit
    Mac Pro (Late 2013)
    BCA
    Mac Pro (Mid 2010)
    5
    5
    4
    DVD
    DVD
    DVD
    Mac Pro (Early 2009)
    5
    5
    4
    DVD
    DVD
    DVD
    Mac Pro (Early 2008)
    4
    4
    DVD
    DVD
    DVD
    Mac Pro (Early 2007)
    DVD
    Mac Pro (Mid 2006)
    DVD
    You should seek additional Boot Camp help in the Boot Camp forum: https://discussions.apple.com/community/windows_software/boot_camp
    The Boot Camp Help Guides are located here: http://www.apple.com/support/bootcamp/

  • Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

    Hey everyone, 
    I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
    I searched drivers for the windows 8 32 bit but couldn't find any...
    Any solutions guys?
    Thanks a lot.
    Sincerely,
    Chiponn

    There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
    It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
    You'll need an external USB drive formatted as FAT for this.
    1) In OSX, start the Bootcamp Assistant
    2) Press Next
    3) UNTICK 'Remove WIndows 7 or Later Version'
    4) TICK Download the Latest Windows Support Software from Apple
    5) Insert USB drive
    6) Press CONTINUE
    The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
    I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
    Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
    Anyway, hope this post helps ;-)

  • I recently installed a 2nd drive in my Mac Pro.  I wanted my pictures on the new drive so I moved the Picture file there.  I also upgraded my iPhoto.  Now iPhoto doesn't know where many of the photos are.  Any quick fix?

    I recently installed a 2nd drive in my Mac Pro.  I wanted my pictures on the new drive so I moved the Picture file there.  I also upgraded my iPhoto.  Now iPhoto doesn't know where many of the photos are.  Any quick fix?

    Launch iPhoto with the Option key held down and select the library on the other hard drive from those listed in the window:
    OT

  • Installing CS5.5 on my new mac pro - what to do?

    Over the years I've purchased CS3 (boxed), CS 5 Design Premium (boxed), and CS 5.5 Design Premium (downloaded upgrade). I am ready to install 5.5 on my new mac pro. Questions:
    I had once copied some CS 5.5 dmg files to my backup drive but they appear to be only pdfs about installing, etc., not applications...so,
    Do I need to install my boxed CS5 first or is my 5.5 the complete set even though purchased as an 'upgrade'? (I see there are complete, separate CS5 and CS5.5 folders on my old mac)
    With the above info in mind, I have to re-download CS5.5 from Adobe, right? Thanks!

    Direct Download Links for Adobe Software
    Simply install CS5.5 right away and it will ask for the previous serials for verification.
    Mylenium

  • I AM TRYING TO INSTALL MY CEATIVE SUITE 2 TO MAC PRO WITH OSX.9, really I don't know why I keep answering the same questiion

    I AM TRYING TO INSTALL MY CEATIVE SUITE 2 TO MAC PRO WITH OSX.9, really I don't know why I keep answering the same questiion

    Seriously, I have a full version of Creative Suites2 premium that I was told would be the last version I need to buy..... So I would like my version loaded on my Mac Pro!

  • Can a power mac g5 run on the same ram as a mac pro?

    I have a Power Mac G5 and want to buy some new rame and i was wondering if it ran off the same ram from a Mac Pro, Specifically 1 RX8-PC3-8500E-7-10-DO ram type.

    OWC is a great source for Mac RAM:
    http://eshop.macsales.com/shop/memory/PowerMac-G5-Memory

  • Earlier i tried installing additional guitar lessons on my mac pro but but nothing is happening now my garageband is open but shows no screen and won't let me quit it garageband what do i do?

    earlier i tried installing additional guitar lessons on my mac pro but but nothing is happening now my garageband is open but shows no screen and won't let me quit it garageband what do i do?

    Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more appropriate forum for your product.

Maybe you are looking for

  • How to uncomment code in Standard SAP Programs

    Hi Experts, how to uncomment entire code  of standard SAP programs  which is commented . Standard SAP Program is fully commented,i have to uncomment it ,to work it as normal. i saw that some lines * / * like  this are there in the commented code . wh

  • Read FAGLFLEXT

    Hello Friends, I am trying to write a balance sheet report. I was adviced to read figures from FAGLFLEXT instead of BSIS and BSAS. But I can not figure out which field is what. Is there any documentation on how to read from this table based on fiscal

  • How to upload data into form of Oracle EBS R12 using ATS ver 9.0

    Hi experts, Could you please guide me how to upload data into form on Oracle EBS R12 using Oracle Application Testing Suite verson 9.(The simpliest way) For example: I need to create user account on Oracle EBS. Normally, I use Dataloader to upload th

  • It's possible to use photoshop on different pc using an account? thank's

    hi, yesterday i activated photoshop on a pc, but i need to use it on my mobile pc and in the office. i can enter with the same license or not?

  • Superwhite Edges

    This is an issue we've noticed for some time, but have never received a response for the reason. We notice this most with white-on-white composites. There is a superwhite (105-110 IRE) edge around the cropped or repositioned image despite the element