Installing more than 5 devices...

How do you enable more than 4 devices on the MSI-6580? e.g I have 2 cd-rom drives and two hard disks. How do i install a new hard disk?

you can get an ata 100 or 133 pci card,a raid cards another option

Similar Messages

  • Can I install more than one configurator profile

    I want to develop 3 or maybe 4 layers of iPad iOS8 restrictions & Passcode rules.
    For example ALL iPads will have enforced Passcode rules, but only SOME iPads ill require content filtering & SOME require Control centre in lock mode.
    The actual working groups of iPads require a lot more complicated set of config elements - above is only an example.
    I'd like to create & install different profiles & INSTALL MORE THAN ONE PROFILE.
    I have tested this on a few iPads & it seems to work.
    My question is - Is this the recommended way / is there a problem if i install more that one profile ?
    Thanks in advance for any help.
    Kind Regards
    George kennedy.

    We install many configuration profiles on each of our devices. We only use one payload per configuration profile so that we can be very granular with our configurations. What I don't know is what would happen if you installed 2 configuration profiles with conflicting restrictions (i.e. one configuration profile allows Messages, and another does not allow Messages). We just make sure we install only one restrictions configuration profile, and then a bunch of other configuration profiles (mail and calendar settings, web clips, WiFi profiles, etc) on each device.
    Hope this helps!
    ~Joe

  • How to install more than one instances on one machine

    Hi ALL,
    I want to install more than one instances on one machine, but i am a freshman on SAP field. How and where can i get the related infomation for that? thank you very much !!

    Hi tieyan,
    Glad the information was of some help.
    For Windows, there is an older note <a href="http://service.sap.com/sap/support/notes/28392">28392</a> that has some more information. It is important also that the SAP parameter PHYS_MEMSIZE is sized correctly according to note <a href="http://service.sap.com/sap/support/notes/88416">88416</a> (the bottom of the note gives some examples). For example, if there were two central instances and the two Oracle database instances on one host, PHYS_MEMSIZE for both instance profiles (of the central instances) would be 35% of the RAM (1/2 of 70%). In the case of MSSQLSRV 2000, for PHYS_MEMSIZE you would refer to the scenarios of note <a href="http://service.sap.com/sap/support/notes/327494">327494</a>.
    If you ever want to thank somebody else for helping in answering a question, the <a href="https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement">Rules of Engagement</a> has a section 'Thank Others by Giving Points' that explains this further.
    Regards, Mark

  • Can I install more than one PCI1409 in a PC

    I have to capture two RGB sources for identical treatment. Can I install more than on PCI1409 in one PC ? Is there a limitation of the number of cards ?

    You can install multiple cards in a single computer. The main limitation is bandwidth of the PCI bus. I am not sure exactly what that limit is, but I don't think you would have any problem acquiring two RGB signals at normal rates.
    If you have to process the images as you acquire them, you could run out of processing power, though.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • Can you install more than one signature on the iPad Mail?

    On OSX you can install more than one signature on Mail. Can you do this on the iPad too (also iPhone)? If yes, how?

    Not at the present time. This will be available with iOS 6 to be released this fall.

  • Is it OK to install more than 1 version of JDeveloper ?

    Hi,
    I am currently using two versions of JDeveloper 11.1.2.3.0 and 11.1.1.6.0 , the JDEV_USER_HOME for these two versions are set in two different directories also?
    Now I have to use the Jdeveloper 11.1.1.7.0 also.
    Is it advisable to install more than 1 or 2 versions in a single JDEV_USER_HOME ? Or should I give some other path for that new install also?
    Thanks
    Nigel.

    I have 9-10 differen versions of JDeveloper (since 9.0.3 ) working at my compute with no problem. Some of them even share one and same JDK installation.
    Hint: If you are the only user of your compuer, you can start JDeveloper with command-line option -singleuser. In this way the user's JDev system directory will be created within the JDev installation directory instead of within the user's home folder:
         jdeveloper.exe -singleuser
    Hint: If you need two or more JDev versions to be started and run concurently, you may have to specify different ports for the integrated WLS (if you develop Web applications) and start the integrated WLS).
    Dimitar

  • Install more than one exe into one folder or into some subfolders of the same folder

    Hi!
    I want to do at least one of the following:
    1. I want to install several exes (built with LV app builder) into one directory because they belong together.
    2. Make several subfolders under the same top level folder aand install exes into each of them.
    The (top level) folder should be the "company" folder. The subfolders are for the applications.
    For example:
    c:\company\app1\app1.exe
    c:\company\app1\app1setup.exe
    c:\company\app2\app2.exe
    etc.
    This may also reside under the "program files" folder.
    If i try to do so, i encounter some problems setting up the build specifications. If i have more than one build spec. for exes i cannot add them to the same folder. At least if they contain the same external files, e.g. dlls.
    If i try to make one installer per exe, i get an error message telling me that the same folder (my "top level folder") already exists in the registry and cannot be added a second time. This is also true if i try to make a new project instead of having several installer build specs in one project.
    I use Labview 2009 (engl.) under Windows Vista (german).
    If anyone has some help for me or encounters similar problems please let me know.
    Holger
    Message Edited by HolgerD on 09-26-2009 10:13 AM
    Solved!
    Go to Solution.

    Hi Holger,
    the build directories should be different for each build, but you can copy the executables into one folder manually (tested successfully in WinXP). For multiple installers, put each installer build in a separate directory, and install all to the same program files subfolder. Works with XP (tested!), so this must be a Vista issue...
    Please build the four specs in attached project and run both installers to the same directory - should be working...
    Best regards,
    Sebastian
    Attachments:
    calc.dll.zip ‏73 KB

  • How can I tell if I've installed more than one copy of Flip4Mac?

    I have a bunch of .WMV files and decided to install Windows Media for Mac.  It wasn't easy and I think between the two installations and attempts at uninstalling I might have more than one copy.  Any help is appreciated.

    That site is a con. It makes you believe it is scanning your system for viruses and then says your infected and offers you an anti virus installer to download.
    Its a con. It is pc-centric if it is offering you some malware then it is in a .exe format and cant run on a mac. I am unsure why your console opened I don't think that is related.

  • Installing more than official RAM

    Whilst reading posts submitted here I see that the clever folks at http://www.everymac.com inform me that it's allegedly possible to install EVEN MORE memory than Apple officially say
    But "bu*ger me if I can find how to do this considering it only has two slots. Am I missing a trick thinking that RAM only comes in 2/4/8/16 units..? Am I just being dumb..?
    my machine:
    Early 2008" (iMac8,1) models use 800 MHz PC2-6400 DDR2 SO-DIMMs (200-pin) Hardware Overview:   Model Name: iMac   Model Identifier: iMac8,1   Processor Name: Intel Core 2 Duo   Processor Speed: 2.8 GHz   Number Of Processors: 1   Total Number Of Cores: 2   L2 Cache: 6 MB   Memory: 4 GB   Bus Speed: 1.07 GHz   Boot ROM Version: IM81.00C1.B00   SMC Version (system): 1.30f1   Serial Number (system): VM816C4HZE4   Hardware UUID: 8303B551-C53E-54F5-9973-C6485C6B097E

    I personally recommend you go to
    http://www.crucial.com
    Let them scan your computer and they will recommend exactly what you need. Then you can choose to purchase from crucial or Otherworld Computing, it is listed as OWC, either place is excellent to buy from.
    Cheers
    Don

  • How can I install more than one brush at once

    IV tried placing them in the preset brush but they dont load into photoshop and I have 300+ brushes to install HELP (photoshop cs6)

    Putting the files in the presets folder doesn't load them - it just makes them more easily available for you to load.
    The easiest way to load your brush preset files is to drag them into the running Photoshop application.
    But remember that those sampled brushes and textures consume resources, and will take a lot of time to load at launch.

  • Headings and other print run into each other and I cnnot see all the print in some boxes on vrious web sites. I have removed and re-installed more than once.

    copy on the web pages overlap.....headlines appear over other print.....link tabs are on top of each other. I have removed and re-installed Firefox many times. This does not happen with other browsers. Also, some web sites show sections that are off center.

    Hi,
    Please see [https://support.mozilla.org/en-US/kb/Firefox%20prints%20pages%20in%20a%20different%20layout this]. If the site has a Print button/icon you can try to use that. On some sites you can also try to right-click the content > '''This Frame''' > '''Print frame'''.
    [http://kb.mozillazine.org/Problems_printing_web_pages Problems printing web pages]
    [https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox?e=sph&redirectlocale=en-US&as=s&s=printing&r=0&redirectslug=Firefox+prints+incorrectly Firefox prints incorrectly]

  • Installing more than 1 version of Dreamweaver on 1 computer

    I'm wondering if anyone is aware of any issues that I might
    encounter if I install 2 different versions of Dreamweaver on my
    Mac. I'm currently running CS3 (Version 9 build 3481). But I'm
    teaching a class where the students only have access to MX2004.
    Some I'm thinking I should install MX2004 on my computer to avoid
    any differences in what they are seeing and doing and what I am
    seeing and doing. Just wondered if anyone has done something like
    this and if it's OK. I'm concerned the preferences might get mixed
    up between the two versions or they might conflict with each other
    in some other way. Any advice or insight would be greatly
    appreciated. Thanks!

    install and go for it.
    On windows or mac, you can install any versions side by side
    that will run
    on that OS. they are unique stand alone installs.
    On macintosh- you can even have them open at the same time.
    The preference files are unique.
    Suggest you go into CS3, dw menu-->Site-->Manage Sites
    and use the Export
    button to create copies of whatever site definitions you want
    available in
    the older version. Then in dw8-->Site-->Manage Sites
    use the import button
    and browse to the folder you saved the .ste files in.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Can we install more than one gateway service on the Gateway-pc?

    Hellos.
    There are several versions (instances?!) of IDM running happily on our IDMserver e.g. 7.1.04, 8.1.0.12, 8.1.1.0
    What I would like to do is to arrange 3 gateway services one for each IDM version and each version of the gateway bound to a different port.
    When I try to install the second "service" it bombed out with...
    C:\idmgateway71>gateway.exe -i -p 9271
    02/08/2011 15.01.09.402000 [1676] (../../../../src/wps/agent/logging/WSTrace.cpp
    ,150): trace active, level: 4, file: c:\idm\GWtrace.txt, maxSize: 99999 KB
    02/08/2011 15.01.09.402000 [1676] (../../../../src/wps/agent/logging/WSTrace.cpp
    ,108): In WSTrace::init()
    02/08/2011 15.01.09.402000 [1676] (../../../../src/wps/agent/logging/WSTrace.cpp
    ,109): Gateway version: 'Sun Java System Identity Manager 7.1'
    02/08/2011 15.01.09.402000 [1676] (../../../../src/wps/agent/logging/WSTrace.cpp
    ,110): OS version: 'Windows Server 2003 Family Service Pack 2 (Build 3790)'
    Usage: gateway -in -r -s -k -tn -d -pn -fname -ln -mn -v
    -i: Install this program as an NT service, with specified startup
    -r: Remove this program from the Service Manager
    -s: Start the service
    -k: Kill the service
    -t: Set startup for an existing service
    -d: Debug; run as a regular application
    -p: Specify a TCP/IP port number (9278 default)
    -f: Specify the path to the trace file
    -l: Specify the level of tracing (0 default - no information)
    -m: Specify the max trace file size in kilobytes
    -v: Display the version
    ^C
    C:\idmgateway71>
    C:\idmgateway71>
    What gives?!

    I see the methodology...
    I can indeed bind several gateways to different ports.
    BUT.
    I will need as many encryption keys as I have gateway daemons and It seems this Gateway was designed as a single shot.
    I get errors like: Cannot find encryption key from Registry: using default.. and when I try testing the connection I get bad userid/password.
    Thanks for the help I can continue digging at this..
    GF

  • Installing more than one SDK

    Is it possible to install J2SE 1.3 (SDK) and J2SE 1.4 (SDK) on one machine? Or will this cause problems?

    It's just that the install instructions say to be sure and uninstall any previous versions.
    Thanks

  • Problems installing SSL certificates for more than one alias on iMS 5.2

    I have a problem to getting encyption on IMAP/HTTP/SMTP when they are on the same server. I only getting one SSL certificate installed by the Netscape console wizard, and therefore only one alias.
    Let's say I have 3 aliases to the same server just for the scalability, imap.vxu.se, smtp.vxu.se and mail.vxu.se for http (https). Then I can only have one certificate installed at the same time, for example https://mail.vxu.se. And the others, like (S)IMAP I getting a dialouge that says the hostname doesnt is the same as the registred in the certificate. How do I solve this? Is there some possibillity to install more than ONE certificate, so I can have one certificate for each alias?
    Environment: Full 420R, Solaris 8, iMS5.2
    Thanks in advice

    Although I completely agree the comments that suggestion this is not a great configuration idea, the error you are seeing ("...bean not found...") likely has nothing to do with the configuration - at least not as mentioned. My first guess is that if you are running the same exact form (FMX) as you ran for your first test then there should be no error. The only way such an error would appear is if the proper jar files are not being pulled to the client JRE or if the fmx was not properly generated. Be sure you are including config=webutil in the URL or that you have added the Webutil configuration info to your own named configuration section of formsweb.cfg
    Regardless, if this is a Windows machine, the probability of having problems with multiple installations of the same version is high. Consider that the system PATH, CLASSPATH, ORACLE_HOME and various other system variables needed by the server side of the installation will overlap for each installation. This will cause problems. On the client side, attempting to download jars of the same name from the same server, but which are not actually the same files will confuse the JRE. If the JRE detects that a file which it has already cached is coming from the same server (host) then it will not attempt to pull it again. This will be a problem if the jars are not exactly the same in both installation. Making the problem worse is that you may not be able to easily determine from which installation the jars (or any files) were obtained.
    So. as a general rule, regardless of whether multple installations can co-exist, I would not recommend it. This is especially true on a Windows platform.

Maybe you are looking for

  • How do you change file type associations?

    as in which kind of file opens with what application

  • Webservice API call

    I have been trying to make Webservice call to "https://webservice.exacttarget.com/etframework.wsdl" using coldfusion server 9.0 without much success. My code recognizes WSDL and it methods but When I call method it throws following error: Web service

  • MAJOR iPod/iTunes/Computer Help Needed

    Ok heres the problem. I get a virus on my comp awhile back, so i have to System Recovery on my comp. Iv had viruses and done this system recovery to my comp many times. And every time i get it working after the system recovery my iTunes wont work, al

  • Date range problem (bubble chart)

    In my bubble chart on X axis Iu2019m displaying date range I have two parameters start_date and end_date in Crystal 2008 this range is displaying correct but in my web app not. In web app this range is displaying from 01-01-1970 to 01-01-1970 (but Iu

  • Charm bar on windows8

    how to turn off the side swipe for the charm bar in windows 8 on hp 23f205a touch screen as i have it set up in kiosk modem and dont want customers to be able to access the charm bar by right side swiping on the touchscreen ,can you help with this pl