Installing mountain lion failure, installing mountain lion failure

installing mountain lion failure.
any help?

More details on what is happening would help us to help you.

Similar Messages

HT1338 Dear MAC-Friends. PLEASE HELP ME. I am extremely afraid to do something wrong - what will be a failure so I loose all the photos I had in my iphoto library before installing the Mountain Lion. I have just installed the MOUNTAIN-LION and now I c

Dear MAC-Friends.
PLEASE HELP ME.
I am extremely afraid to do something wrong - what will be a failure so I loose all the photos I had in my iphoto library before installing the Mountain Lion.
I have just installed the MOUNTAIN-LION and now I can´t use my Iphoto-programme without answering the following question:
Choose another Library ? ( But I only want the choose the photos which one was in the old iPhoto-Library and not the other photos on the MAC-computer ? ).
and the other possibility is:
Create a new Libray ! Which iPhoto-library ?
And why create a new and to risq to loose the old photos.
PLEASE HELP ME.
Kind regards FINN GRABOWSKI

Ok. Let me first ask you, do you have any backups of your files - for example, do you use Time Machine or any other backup system?
Next, quit iPhoto. In the Finder, go to your Pictures folder. Is there a file there called iPhoto.Library? How large is it? (If it doesn't show the size, click once on it, click cmd-I to see the information). If it's a healthy size (ie, several GB), then that should be your library, and you can double-click it to launch iPhoto. (The application will remember where your library is next time, you can just launch iPhoto normally).
If that's not the right file, check your Trash. Is there anything in there?
Matt

Mountain lion install failed due to hard drive failure. It said I needed to repair the disk and I was taken to the lion recovery menu.

Unfortunately, and quite idiotically, I never made a back up of my files and the lion operating system before trying to upgrade. My main concern now is just making sure none of my files were lost because of the install failure. I don't know what to do from here because I'm afraid to make a mistake and never be able to recover them again. What can I do to restore my computer back to normal? When I look under Macintosh HD in the Disk Utility option on lion recovery, it seems as if it recognizes that all of my files are still intact, because about 200 GB out of 319 GB are used up on it. This correlates to the amount of files on my disk. Pleaseeee tell me I didn't just lose all of my files. Any help will be greatlyy appreciated!
Sincerely,
Mathew Smith

You only need the powered exernal drive, OS X reinstall is free to install on the external drive.
Hold the option key and boot from the extenral drive.
When OS X upgrades or installs (without a disk wipe first), it doesn't touch Applications and User account folders (only Apple programs) so as long as the drive and file system works, (even if OS X doesn't boot on that drive) the files can be recovered via normal drag and drop methods.
If you can't access the files normally, only then you will have to install Data Rescue on the external drive (another $100) to read the 1's and 0's of the non-encrytped files directly, bypassing the file system structure. Thus is the price for not making adequate backups.
Most commonly used backup methods
In some major cities where there is a lot of computer tech support competition, you might be better with a local PC/Mac data recovery and restore service, saving you some money. But with the extenral hard drive you can then later make that a TimeMachine or clone drive, which you need anyway regardless.

Failure to install on snow leopard, mountain lion

I have a 2.5 GHz Intel Core 2 Duo with 4 GB SDRAM. On certain U-tube and other videos, but not all, I get a message that says I need to install the new Flash player. When I go to the link provided, or directly to the Adobe web site, and install the Flash player, I continue to get the message telling me I need a new flash player.
When I run the Adobe help for Flash, I get a blank box where I should see my version of flash and my operating system. When I repeatedly run the Flash uninstall program for Snow Leopard, and reinstall Flash, the result is the same.
I get the same result for Mountain Lion.

Your plugins are probably broken...
Download the offline installer here: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac /install_flash_player_11_osx.dmg
Quit your browser
Go to: Mac HD/Library/Internet Plugins
Trash the Flash Player.plugin file from there
Go to: Mac HD/Library/Application Support/Adobe
Trash the Flash Player folder (the whole folder)
Empty the trash
Reboot
Mount the DMG and run the installer.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

How do I get MS Office 2011 to install from DVD on Mountain Lion?

I just did a clean install of OS X Mountain Lion from a prepared bootable SD-Card on a new partition of my harddrive and wanted to install Microsoft Office 2011 using the original disc. But after double clicking the installer icon nothing happened besides the rainbow colored spinner showing up and disappearing shortly after and my optical drive making some noise. Activity Monitor indicated that the process of the Installer application doesn't react so I had to force quit it. I tried it multiple times to install MS Office this way using the disc but the problem persisted, also after a reboot.
So far my system is still in a pretty fresh state since I installed hardly any separate apps yet and the most intrusive one of them is probably merely Sophos. OS X's Installer app worked the way it should when I was installing iLife the day before using the Applications Install DVD that came with my Mac.
When I installed Office 2011 the first time, presumably one year ago on another partition on the same Mac which was running OS 10.6, everything worked fine and the same is true for the time when I upgraded to OS 10.7 (although I didn't install Office again, I just kept everything on the same partition).
So is there anyone out there who experienced similiar problems and can please help solve this problem?

Well, that depends on what you mean when you say "verified". But as I wrote in the first post I was able to install iLife from disc on Mountain Lion without much ado. And just now I tested a DVD with some pictures on it and the disc drive would read and display all photos in Preview.
And given the facts that I rarely use my optical drive at all and that my machine is only little more than a year old, a drive failure seems quite unlikely. But thanks for your response anyway!

I need to have both Snow leopard and Lion...Mountain lion running on my iMac. How do I install Lion or Mountain lion on an Ext H D and boot from it?

My software is obsolete (and now dead) in 10.7 so I need to keep Snow leopard alive to run that- but now things like TurboTax are dropping support for 10.6 or lower and I have to have lion or Mountain Lion available. I actually downloaded Lion onto a thumb drive but never installed it when I found out that it would immedaitely render all my FreeHand files inaccessible (years of work!), Now that I am forced to have an OS above 10.6 I was hoping I could install whichever--Lion or Mountain Lion onto an external hard drive and figure out how to boot from that (found something in archives I think, but I need words of one syllable or less). This way I could, ideally, boot from either the External hard drive in the higher OS when needed, or from the internal hard drive when I need to use Snow leopard. There is a long story here, but I think this is the gist. I wasn not sure if this should be asked here or in either Lion or Mountain Lion (both of which I have, essentially, ignored since I would not be moving up until I could figure out how to access those old files of forms and drawings00but now I have no choice. I am panicking now that I HAVE to make the move anbd cannot afford to buy another Mac just to keep two separately running. Any help would be greatly appreciated. i asked Apple when Lion came out and they said there was no way to partition (even if I KNEW how to do that) the haaard drive and install both on my iMac-- but I "think" this is a bit different and possible??? Thanks (once/if I figure this out, I need to figure out how to back-up but that is another matter)

You need to move to Windows 7, because Apple is now releasing a new OS X version annually and it's playing havoc with people's hardware and software.
Windows 7 will get support until 2020, that's 8 years of software stability, however you do need to make System Restore disks, boot disk and another on a hard drive to self restore (like TimeMachine is for OS X)
Apple has no plans to change their currrent behavior as all they care about is selling new hardware with a shiny new OS X verison on it.
If you wait to move, what will happen is you'll lose that full 8 years and will have to swtich to a newer Windows sooner
Windows 7 machines are still widely avaialble, despite Windows 8 (a failure) being pushed currently.
Running three OS X operating systems on one machine is quite a chore reserved for only seasoned computer geeks, then it's only going to last X months as the next OS X version will be released, then the next a year after that.
Another method would be to get a virtual machine software (virtualbox is free) and install Windows 7 into that to ease your transitition if you cant' spring for a Windows 7 machine, preferablly a tower that will last a long time.
Here is a method to run Snow Leopard in Parallels, however it's a unapproced hack and not for the comptuer newbie.
http://forums.macrumors.com/showthread.php?t=1365439
We have no control over Apple's OS X release cycle, nor the third party developers who make their own decisions what to support.
Our only choice as users to stop using both products and seek software/hardware stability.

Is possible to re-install Mountain Lion after Mavericks issues?

My mac became vary unstable after upgrade. Tech support was helpful but there is more issues now then before. They had me safe mode to check any programs that cause boot failure, safe reair and then reinstall new operating system. Now when it boots Finder goes on a tangent. Keeps asking about do you want to quit last program. All programs that are on the Mac came from the App store. The Mac is 2012 model that ran flawless until upgrade.If I revert to Mountain Lion, will I loose anything that was install earlier? And one other thing, I Cloud wants to be involved in everthing.

To completely restore your system from a Time Machine backup boot OS X Recovery by holding the ⌘ and r keys (two fingers) while you start your Mac.
Once the Mac OS X Utilities screen appears, select Restore from Time Machine Backup.
Select the TM backup of your Mountain Lion system prior to upgrading - their backup dates and OS X versions will appear, so you will be looking for the most recent backup of your system when it was running OS X version 10.8.5.
When it completes, your Mac will restart and your previous system state will have been restored.

My Macbook Pro is running Leopard 10.5.8 and I want to install Mountain Lion

What are the steps for doing this?
I bought a used Macbook Pro (late 2008-2009 silveraluminum 250 GB HD model) after recently buying a new Macbook Air that I broke. My Macbook air was a 2012 and came with Mountain Lion 10.8 preinstalled (as there are no CD slots on the Air models). I do have an external hard drive and I had been using that as my time machine backup. Consequently, my entire Macintosh HD has been cloned from my Macbook Air onto my western digital external HD. However, I cannot restore from my time machine backup (external HD because it says that I do not have the same operating system currently installed on my laptop.
What do I need to upgrade to the newest Mountain Lion operating system? Do I have to buy snow leopard and then again mountain lion? That seems pretty ridiculous. Or, is it possible to just buy the mountain lion OS from the app store or buy the installation CD?
Another question, is I do not see the App store icon on my dock when I have my desktop up. How would I buy Mtn Lion if I cannot access App store. Does Leopard not have an app store app??
Please provide links where I can find necessary software updates and steps to take to get mtn lion so that I can transfer my clone HD off my external hard drive to my laptop I just bought.

First you have to get the Model Identifier from System Profiler, then make sure of it's model and RAM amount, then use Crucial.com or OtherWorld Computing and max out it's RAM capacity.
There is a 10.5 version of MacTracker here that can assist in getting the full RAM capacity of the machine, not just the amount Apple provides, and the RAM specs.
http://mactracker.ca/archive.html
Install/upgrade RAM or storage drive in Mac's
Also a machine that daed is likely got a dying boot hard drive, so you should replace that also with something like a 7,200 RPM for better performance, large storage capacity and decent price. A SSD would be price overkill for that older machine and add another level of problems enabling TRIM support etc.
Next you need the 10.6 white retail disk Apple sells online.
Next you follow this User Tip for installing 10.6 on the new drive. It is advised to Zero Erase the entire drive regardless of new or the old one.
How to erase and install Snow Leopard 10.6
Once 10.6 is installed you use the 10.5 disks to install your free iLife, then use Software Update repeatly until clear to get to 10.6.8 which provides AppStore for 10.8 install (paid).
Now comes the problem. Later OS X verisons of 10.7+ are better on MacBook Pro's Early 2011 and later, the performance drops off if you use machines earlier than 2010 models.
It's because 10.6.8 was written to be a performance oriented with a small memory footprint thus it's better in tune with the processors and graphics potential of the models in it's day.
10.7+ are fully 64 bit operating systems and require a heft bed of RAM, 4GB minimal and a lot more preferred., it's why I provided the MacTracker info so you can put the maximum RAM into the machine and a faster boot drive, with RAM it's usually MORE can be put in than Apple specifies.
If you can think you can live without 10.7+, then by all means enjoy the performance 10.6.8 gives, at least with that version of OS X you can stick with the hardware that came with the machine. For Snow Leopard Speed Freaks
I say this because a 2008/2009 machine is 5 years old and on it's deathbed far a laptops typically go, so it doesn't have much left in it. It's cooling fins are likely clogged with dust (behind the fans) it's been overheating with the previous owner, the Superdrive is likley worn out and they sold it for a good reason, like that it was going to need a lot of upgrading to bring it to 10.8 only to have 10.9 released in a few months and it will be behind again, or denied being allowed to go to 10.9 or later by Apple due to the age of the machine and unsupported graphics or other reason.
Buying that machine for 10.8+ was not a good choice because of the upgrades required and the poor CPU/GPU performance. It wil run 10.8 of course, just not as snappy as 10.6.8 will be or 10.8 was on your Macbook Air.
If you can live without iCloud, 10.6.8 has over 25% market share still and Apple is issuing security updates but they don't change the version number any longer or give new features.
By the time Apple stops issuing security updates for 10.6.8, that machine likely will be dead of another cause/hardware failure of some sort, most likely the graphics will go on it next.
So I foresee the two events accuring about the same time for you, I see spending more money on that old machine in new software for 10.8 etc., as a complete and utter waste.
If you purchased a used Early 2011 model or later, then I wouldn't have any objection and say go right to 10.8 if it has enough RAM.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still

After I tried to install Mavericks on my Macbook Air, June 2012 the the drive began to fail, with the appearance at more and more frequent intervals of the spinning beach ball, I had to restart even after I wiped the drive and reinstalled Mountain Lion

After I installed Mavericks I could no longer shut my Macbook Air (mid July 2012) down, except by force quit,I was using an Apple Tv screen and Apple wireless keyboard. After that the spinning beachball kept appearing at more and more frequent intervals, even after I had wiped the drive and re-installed Mountain Lion from the Apple site. It is now almost non functional. and just three months out of warranty

Backup your data as soon as you can.
MacBook Air computers sold between June 2012 through June 2013 are known to have a high SSD failure rate and Apple is replacing them for free.
http://www.apple.com/support/macbookair-flashdrive/
You should maintain current backups. Given the known failure rate of your SSD that is especially important.
For more about backups
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031

HT1338 Has anyone successfully installed Windows XP Mode and Windows Virtual PC software inside Windows 7 Pro inside Parallels 8 inside Mountain Lion running on a Mac Pro built in 2013?

I wanted to ask if anyone using a Mac Pro running Mountain Lion, Parallels 8, and Windows 7 Pro could run XP Mode?
My experience has not been encouraging in that I progress to the end of the final mile, that is configuring XP Mode for first use, then an error message appears saying I should try again, that is I should attempt to configure XP Mode again for the first time use. An endless loop, with no visibility into the nature of my configuration failure.
I understand my problem is a narrowly focused, microsoft-centric issue, however, I would imagine this XP behavioral Mode running inside Windows 7 Pro is a common goal for many users, so I thought this question was reasonable to ask our group.
Please advise, and thank you.

Hello FatMac,
I wanted to let you know that your "requires a patch" feedback looked--at first--like the piece of the puzzle I was missing. Turned out, however, when I downloaded the 64 bit version of the patch, then attempted to install it under Windows 7 Pro, my installation was first searched, then my patch installation returned a message saying this patch was not applicable to my system. (BTW:my Windows 7 install is 64 bit) This failure to install surprised me because, based on an earlier evaluation for hardware virturalization support, my MacPro does not have virturalization hardware support. I mean, based on this no hardware support feedback, and based on the nature of this patch, it looked as if the patch should install and set my problem right.
Nevertheless, the patch won't install, and I don't know a way to query or coerce it. I'm approaching the point of diminishing returns with this problem. I have two applications (Adobe Illustrator 10 and Framemaker 7.0) which will run, but they don't behave properly, under Windows 7. BTW: I did make somewhat extensive use of the Windows compatibility tool early on, but nevertheless, FrameMaker 7 simply quits at the worst possible moment, and Illustrator 10 graphics are very often blank black areas where pallettes should be.
Thanks again for your thoughts and help. I believed we were heading down the right track, but for reasons not visible to me, (the user), the patch that should fix this problem will not install...
If there is any saving grace to this situation, my problem is repeatable. I mean, it's not on-again/off-again. When I attempt to configure XP Mode for its first use, the progress bar turns red at the final second, then complains that it could not complete its setup. Please Try Again recouts its final advice. (Famous words marking the beginning of an endless loop:-)
Were it not for Illustrator and FrameMaker, I would not have taken us down this dark road.
So long for now, and hope to talk to you all again soon...

How to download but not install OSX Mountain Lion on Mavericks

Hi all
I would like to download but not install OSX Mountain Lion on my MBP which is currently running OSX Mavericks.
This however seems impossible. I think OSX Mavericks were already installed on my MBP and therefore it seems "impossible" to download it.
Now, why would I to do this? The answer is quite reasonable, due to certain demands related to an application portfolio I need Mountain Lion, because the portfolio is not upgraded to run on Mavericks. And, it is more reasonable to downgrade a version of OSX, rather waiting for the portfolio upgrade which can take years.
Yes, I need to downgrade my secondary MBP which also came with preinstalled Mavericks. This can be done, if I only could download but not install Moutain Lion.
It should be easy enough; download Mountain Lion, make an installer and make a bootable thumb usb stick. Then erase Mavericks and install Mountain Lion.
I have previously bought Mountain Lion so it is accessible to me in the App Store, but whenever I try to hit the Download button, I get a message saying this can't be done, since I am running Mavericks.
This bugs me, it should be obvious users needs the flexibility to swap whatever OSX version they need. It is still software.
So, how can I download but not install Mountain Lion on my newer MBP that came with preinstalled Mavericks?
I would like to see answers like:
"In order to get this to work, you first have to disable the locking mechanism in [...] " instead of "No, this is impossible to do"
Regards

Thanks for your reply Eric
Can't help wondering thought, people are ok with this?
Basically Apple are saying: "Do not attempt to install an older version of OSX which came preinstalled. If so, expect multiple failures." Really?! Has it always been so? For me it's not like I'm going to install Snow Leopard on my Late 2013 Retina MBP, but I would expect some form of backward compatibility between the previous version and it successor. Apparently this is not possible, and how is this even acceptable?
Personally, I am not going to downgrade, as if I had a choice, but I would and I expected however, the possibility to at least download the previous OSX version. What do you do if you have bought several applications, not necessarily online from App Store and buy yourself a new Mac with preinstalled Mavericks and after installing your "old" applications they fail to work properly? What do you do since downgrading apparently is not an option. So... again, what do you do?
If you don't have friends with an older Mac, you could be facing serious problems. And I'm not talking about gaming, but serious business.
I find this quite disturbing actually, and please tell me it's not so. There gotta be a way to do this?
I simply want to download the OS but I expect some registry values (like windows' registry) keeps preventing this.
It should be possible to simply download and not download and install in one operation, shouldn't it?
Regards

Brand new MacBook Pro 2012 not booting install of Mountain Lion

Hi,
I have a brand new 15" MacBook Pro 2012 model (2.6Ghz, 8GB Ram) - works fine on OS X Lion. As I had just bought it I decided to upgrade it to Mountain Lion straight away, and here's where the problems start.
After apparent install the machine re-boots, but upon re-boot I get what I have found to be called 'the grey screen of death' where the loading icon disappears and the apple logo appears and the screen dulls slightly. I have also noticed that through the install process I lose keyboard and trackpad funcionality and the 'spinning wheel of death' froze, even though the loading icon contined to countdown the minutes till install.
I have read many threads online now about how to reboot and reinstall OS X Lion, I have done this succesfully. I managed to save the OS X Mountain Lion files to an external device and attempt to reboot that way - same problems!
How on earth do I get OS X Mountain Lion working on this machine?
From the threads I have read no one has answered this - they simply answer how to reboot into OS X Lion. Others have stated that they have been in to see Apple's "Genuis" bar and the "Genious's" cannot explain the problem and attempt to put it down to hard drive failures etc. Problem is, there seems to be a **** of a lot of people out there with the same issue - surely it's OS problems and not hardware if it's a brand new MacBook?
Has anyone else experienced this? And does anyone else have a solution to my problem?
For the record, I have updated my EFI and firmware as well as my operating system before attempting install.
Cheers,
Leigh

Welcome to the Apple Support Communities
As you've Mountain Lion, press Command and R keys on boot, open Disk Utility, erase the drive and reinstall Mountain Lion

Acrobat Printing Failure Mac Mountain Lion

Multipage PDF documents fail to print using iMac Mountain Lion (10.8) and Acrobat 11.0 . This failure is occurring on both USB and Network printers (HP Laserjets). The spooler appears to hang (Printing........). The printers begin to blink error code lights. This does not occur with Word documents. I have narrowed it down to only printing via Acrobat and via Safari (PDF). It does not occur when printing PDFs from Chrome. I have removed the printers. Re-installed printers. Cleared permissions. All multiple times. There is something clearly related to Acrobat's printing and not related to the printers or the connections. Please help.

I experimented with this a bit today and was not able to print from a couple of older G3s running OS X 10.4.11 to a printer shared on a 10.8.1 machine. I was able to print from that G3 running OS X 10.3.x to the printer on OS X 10.8.1.
The only thing I turned up in the logs came from the OS X 10.4.11 machine where the CUPS error_log showed--
D [05/Sep/2012:14:47:42 -0500] AcceptClient: 11 from localhost:0.
D [05/Sep/2012:14:47:42 -0500] ReadClient: 11 POST / HTTP/1.1
E [05/Sep/2012:14:47:42 -0500] get_printer_attrs: resource name '/printers/ ' no good!
D [05/Sep/2012:14:47:42 -0500] Sending error: client-error-not-found
D [05/Sep/2012:14:47:42 -0500] ProcessIPPRequest: 11 status_code=406
D [05/Sep/2012:14:47:42 -0500] ReadClient: 11 POST / HTTP/1.1
E [05/Sep/2012:14:47:42 -0500] get_printer_attrs: resource name '/printers/ ' no good!
D [05/Sep/2012:14:47:42 -0500] Sending error: client-error-not-found
D [05/Sep/2012:14:47:42 -0500] ProcessIPPRequest: 11 status_code=406
D [05/Sep/2012:14:47:43 -0500] ReadClient: 11 POST / HTTP/1.1
E [05/Sep/2012:14:47:43 -0500] get_printer_attrs: resource name '/printers/ ' no good!
D [05/Sep/2012:14:47:43 -0500] Sending error: client-error-not-found
D [05/Sep/2012:14:47:43 -0500] ProcessIPPRequest: 11 status_code=406
I would suggest that all that have this problem submit a report to Apple using their feedback page or via radar if you have a developer's account.

Will I loose information if I install mountain lion?

Will I loose information if I install mountain lion to My Imac?
Do I need to make a backup of all my files befor installing it?
thanks

1. Not unless a problem occurs.
2. Yes. Hard drive failures can occur at any time.
(78119)

Installing mountain lion failure, installing mountain lion failure

Similar Messages

Maybe you are looking for