Installing multiple Oracle intellgent agents on same server
I am going to use Oracle 10g (10.2.0.4) on HP UNIX 11i (11.23). We will setting up development, qa and failover enviornment on the same server. There will be a separate server for production.
Is it possible to install multiple insances of Grid Control including intelligent agent on the same server. We will be using different UNIX logins for different enviornments. We can also use different ports (tcp/ip) if necessary.
One of the things that is confusing me - you say you will be installing Oracle 10.2.0.4 ... that describes both the Grid control version and the Database version, so I have absolutely no idea which product you are installing.
If your question is entirely about Grid Control, you might ask in the Grid Control forums.
Similar Messages
-
Multiple Oracle home and multiple Oracle database versions on same server?
Hi all,
I want to setup a test environment on single Windows XP server with an instance
of Oracle 10g and Oracle 11g. How can I install both versions without problems?
ThanksHi,
I am facing a problem on the same..
below is the link to my thread.
Multiple Oracle Home in Windows
Please reply me how to solve this problem
Thanks
Bhavik Fuletra -
Running multiple oracle versions on the same server...
Hi, I have a server that is currently running oracle rdbms 10.2.0.3 on linux Itanium platform and the database that is currently on that server uses oracle ASM for it's files.
We have a need to also run a oracle rdbms 10.1.0.3 on the same sever and I would like to know if this is possible and will the 10.1.0.3 database be able to use the already installed and running ASM instance that has been created during the 10.2.0.3 install?
Thx.Because it is not just a new database we are trying to migrate an exisiting database to this new server and there is too much data which is time sesitive and the original machine is not very powerful and the only way I can foresee us being able to migrate in a time that would meet our requirements in to use dataguard to setup a physical syandby on the new server and then perfrom a failover to get the database live on the new hardware.
Thats why we are kinda stuck with the 10.1.0.3 database at this point in time until we can get it moved onto a server and staorage platform that will also allow us to upgrade in a timely fashion as welll. So your next question is why don't we just upgrade the existing database where it is know well the reason I am reluctant to upgrade on the existing server is because we only have access to tape backups on this system and I do not have alot of faith on the tape restore as it take a long time to complete and can be error prone. -
How to install a new oracle 9i in the same server where a 8i is installed
Hello and sorry for been an inexperience dba.
Now I need to install 9i oracle version in the same server (solaris os-5.9) where is previously installed a 8i. I'm reading the installation guide and I know that I have to make two different oracle home, and then two different owners .
My problem is when I've seen the kernel parameters and their permissions and of course all of them have the owner the old oracle user.
Do you know if I have to change some of this parameters?
How to do that, and where can I find some guide to follow ?
thanks in advanceand then two different owners .Not necessarily, you can use the same OS user, of course on a different Oracle Home.
where can I find some guide to follow ?http://download-uk.oracle.com/docs/html/A96167_01/pre.htm#sthref106
http://download-uk.oracle.com/docs/html/A96167_01/pre.htm#CHDCEHBG -
Can we install multiple oracle product in same oracle home
hi,
It would be appreciated if any one can answer below:
Is it possible to install multiple oracle product in same oracle home?
thanksinstalling XE and enterprise edition in same oracle _home oracle 10g?
-
Multiple instances of OBIEE11g in same server
Hi Experts,
I need some advice on Creating Multiple instances of OBIEE11g in same server.
the following are the details
i have got windows server R2, installed weblogic 10.3.6 with 64bit JDK, then oBIEE 11.1.1.6.0 software only install and configuration
till here everything is up and running without any issue.
now i want to set up second instance , need some clarifications on points mentioned below:-
1. same home directory can be used (c:\Middleware in my case) for second instance.
2. to start second time software only install shall i mention same c:\Middleware\Oracle_BI1 or shall i mention c:\Middleware\Oracle_B2
3. do i need to mention Bifoundation_domain and weblogic (userid, portno) separately
Awaiting your reply.
Cheers,
AnkitHi,
Once completed instance1 installation then try to another installance2 with custom port option.
*1. same home directory can be used (c:\Middleware in my case) for second instance.*
Yes
*2. to start second time software only install shall i mention same c:\Middleware\Oracle_BI1 or shall i mention c:\Middleware\Oracle_B2*
Ensure that you install each instance into a separate Middleware home on that computer.
*3. do i need to mention Bifoundation_domain and weblogic (userid, portno) separately ?*
No need,1st install WebLogic Server first and then perform a Software Only Install then try to do the Configuration Assistant multiple times (or once for each instance) to configure each instance in the same, or shared, Middleware home.
for more, Refer section 2.2.3.2 - Installing Multiple, Standalone Oracle Business Intelligence Instances on a Single Computer - of the Oracle Fusion Middleware Installation Guide for Oracle Business Intelligence 11g Release 1 (11.1.1) E10539-02
The link is here: http://docs.oracle.com/cd/E21764_01/bi.1111/e10539/c2_scenarios.htm#CHDDIDGE
If you need it, this note may also be useful.
OBIEE 11g: What Is The Format Of The staticports.ini File To Specify The Ports (Doc ID 1224873.1)
Thanks
Deva
Edited by: Devarasu R on Feb 15, 2013 1:27 PM -
I want to run multiple instance of tomcat on same server-very Urgent
HI all,
I want to run multiple instance of tomcat on same server. I have created CATALINA_BASE directory and i put conf,logs,temp,webapps, and work directory. I have configured server.xml in different port. I have set the environment variables too. Though it didn't workout for me. Is there anything else i have to do for that. if so, Please assist me.
I did all according to the tomcat 4.1running.txt
Thanks in advance
Ram.hi,
http://www.linuxjournal.com/article/8561
http://forum.java.sun.com/thread.jspa?threadID=515368&messageID=2458945Hit Google..
http://www.google.com/search?q=how+to++run+multiple+instance+of+tomcat+on+same+server&client=netscape-pp&rls=com.netscape:en-US -
Multiple wiki's on the same server
Is it possible to have multiple wiki's on the same server. I do not mean having 2 wiki pages. however more like having 2 websites from the same server and each having their own wiki sites.
From just a quick play with the possibility both sites still reference from the same place so both sites would see the same wiki pages.
I was thinking of trying to use realms however the wiki info is not kept in the folder that is managed by realmsThis can be done, but it really depends on the load balancer you use.
There is no recommendation from BusinessObjects and you might want to consult the load balancer vendor for instructions and support.
Regards
Caroline -
Problems in Installing Oracle 10g,11g on same server
All,
I install oracle 10.2.0 on RHEL 4.7 and running successfully,
How i can Install more database 10.2.0 at same server, and what i have to changed in .bash_profile
what change i have to do for installing Oracle 11g on same server.
ThanksI am not being strict in my answer as it would might confuse.
Providing you did not use Oracle Express Edition ...
dbca should be able to create and sort out another database 10g for you.
Be careful not to run out of resources {eg use too much main memory}
You can switch between oracle databases in the same oracle home (which is what you will have) by 'export ORACLE_SID=SID2' where SID ... providing your bash_profile sets up the environment required for your first oracle database.
When putting new oracle home installations {eg an 11g installation} on a machine where there is an existing oracle home my rough rule of thumb is to unset variable that relate to existing oracle homes before dpoing install (possible exception of ORACLE_BASE).
eg:
oracle$ env
ORACLE_SID=SID2
ORACLE_HOME=/u01/app/oracle/prouct/10.2.0
ORA_NLS10=...
oracle$ unset ORACLE_SID
oracle$ unset ORACLE_HOME
oracle$ /stage/whatever/runInstallerI think the argument is begining to go against seting ORACLE_HOME and other home specific stuff etc in the .bash_profile.
Rgds - bigdelboy -
I want to install to different version on the same server
Hi all,
I want to install two different version of oracle on same server.
and Both should work parallely without disturbing to each other.
I know it is possible
But while installing what preliminary precautions I willl have to take so that it won't disturbed other running database.
waiting urgently for reply
PramodI would think as long as you set up separate staging areas for the two different versions that there should be no conflict. As always though - make sure you have good backups - maybe two.
-
We have installed Adobe Acrobat X Pro- English,Francais,Deutsch version 10.1.9 in our test environment and tried testing it for converting SAP pages into PDF with a few pilot users. In doing so we faced a challenge, where only one user at a time can use Adobe Acrobat PRO to convert SAP pages in to PDF.As long as the first user who is connected to Adobe Acrobat Pro via SAP isn’t logged off, other users connected to the same server are not being able to get the “Save As” dialog box to save the PDF in their preferred location.
This is a business requirement and we need an urgent solution for the same. Can anyone help us in telling us if this is possible and if yes the how to go about?It's not something we deal with here, the LiveCycle products are a different world. Key points: Adobe LiveCycle is a range of products, some desktop, some server. LiveCycle PDF Generator is the one you should look at, it comes in 3 editions. License terms are by negotiation. Key management is via its Java API.
-
Multiple users connected to the same server
Hi there,
I was wondering if this scenario would be possible to be implemented on a Snow Leopard Server installed on Mac Mini 2.66:
- one iphone developer that needs to be remotely connected to the server to develop apps
- one project manager that will handle the project files and documentation. He will login to the server and upload/download files
- one app GUI designer that will login from time to time, to make the design in photoshop.
Can these 3 users be logged in the same time on the same server without any lag? Or this version of server will only support one user at a time?
Thank you!Yes, you can do ssh and terminal connections, but I'm guessing that's not what you want here; I'm guessing you're headed over from X Windows or (more likely) Windows Terminal Services.
Google for Aqua Connect and related for the path that you're headed toward.
In general, Apple Mac OS X and Mac OS X Server runs one seat and one keyboard and one display per station, whether it's an Xserve server or a MacBook or whatever. -
Problem with multiple Toplink/JPA apps in same server
Anyone have experence of running serveral Toplink/ EJB-3 Web apps in the same server (OC4J, alas)?
We seem to get a problem with the second app failing to initialise toplink, with an entity not found message. Each app runs OK on it's own.Yes, they access the same datasource and most of the tables overlap.
We're thinking it might help to have common entity classes and put them in a shared library, but I don't know if this is relevant (setting up shared libraries complicates testing and tends to snowball, I reckon we need about 15 jars all told).
I''ve had some funnies on OC4J before which I think may be to do with it's use of ClassLoaders, for example I initially put persistence.xml in the libary jar with the data model, but for some reason I get the entity not found error that way. It only seems to work if it's in the classes folder.
For the moment we're getting arround the problem with multiple OC4J instances in the server. -
Running Multiple Web Dispatchers On The Same Server
Is it possible to run multiple instances of Web Dispatcher on the same server? I want to have one instance pointing to my WAS 6.40 system and the other instance pointing to my BW system. I have set up two services on the NT server: One named the standard sapwebdisp.exe and the other named sapwebdispbw.exe. I am using two separate profile files, one for each instance. The services start O.K. However, when I attempt to access my BW system using the HTTP port as defined in the BW profile and the Web Dispatcher profile, I get a message back saying that "The server you are attempting to access has refused the connection with the gateway. This usually results from trying to connect to a service that is inactive on the server." I have double checked that the service is running and that the BW system is up and available.
Any help is appreciated.
Regards,
DougHey guys,
it seems you are web dispatcher specialists
I have problems connecting even one server
I would like to add an Enterprise portal (DEP) to the web dispatcher.
My config file :
SAPSYSTEMNAME = SDM
SAPGLOBALHOST = webdispatch
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = 172.20.40.6
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120, EXTBIND=1, TIMEOUT=120, PROCTIMEOUT=120
Is it possible for you to paste your config file here ?
With explanation what the portal name is en waht the web dispatcher name is ?
The error I get :
no valid destination server available for '!ALL' rc=7
Where can I adjust this !ALL and !J2EE group ?
Where can I manage the /link/ ? (like /irj/portal)
If you need any info please let me know.
THank you for your time & help
BUD -
How to install the oracle patch in the HP_ux server.
Hi,
we are using oracle server 9.2.0.8. We are decided to install the oracle patch in the oracle server.
How to install the oracle patch?
Please suggest me,
Urgent.
Regards
S.Prasadhi,
left upper corner on this forum.
there is a box that "says" Search
It is very easy to use, it is not necessary to be an Engineer.
apart of the notes, there is (at least) one EXACT query like yours:
[O patch apply procedure in Hp-ux and IBM aix|Re: O patch apply procedure in Hp-ux and IBM aix]
Maybe you are looking for
-
Variable selection screen: display as Key
We are using NW2004s for our BI system and for the front-end components (Bex Query Designer, Bex Query Analyzer, ...) When opening a certain query with the Analyzer, the variable selection screen is shown. But now we can only input values directly in
-
Problems to change format for webcam (linux)
Hi, in this forum i found Ownes JWebCam. The code is really great and it helped a lot. In this code he searchs for all supported formats with the method CaptureDeviceInfo.getFormats(). In the program he uses only the formats he found. I thought this
-
Sell configuration variants without IPC
Hello, I'm working on a new implementation of Internet Sales R/3 edition and I'm facing the following situation. My customer has variants of configurable materials in the catalog, and wants to sell them via B2B application without showing the configu
-
What is error 29 and how do fix it
what is error 29 and how to fix it
-
Sales order prod costing error and extracting the cost $ value
We are doing sales order product costing via custom program which internally calls FM CKKA_Costing_Process, CK_F_SD_ORDER_CALC and all other std processes and calculates the cost. In the event of error, the calculated dollar value is getting cleared.