Installing MX 7 on Windows 2003

Hi, i'm having some issues with this install, it's my first
try at anything remotely server related, so it's all new to me. I'm
not getting any errors when I install coldfusion, but the
JrunScripts virtual directory is not loading at all, and on the
last try, administrator was strangely missing. I'm a little
confused about where is best to install the administrator...does it
matter as long it's in the same directory as the website?
Any help would be great
Thanks

I would read the
livedocs
on configuring web servers for Coldfusion MX7

Similar Messages

How to install oracle 9iASR2 on windows 2003 server

Hi,
I want to install oracle 9iasr2 on windows 2003 server. Pl guide.
Arvind

I want to install following component
Oracle 9i form server & report server
Oracle HTTP Server in SSL mode
Oracle As Web Cache
Regards
Arvind

Not showing company list after installing B1 2007 on windows 2003 standard

Hi gurus,
I am facing a problem regarding B1.System not showing company list after installing B1 2007 on windows 2003 standard edition.
Plz help me.
Thanks in advance
Regds
Maddy

Hi Maddy,
Please tell me did u upgrade from 2005 to 2007 or u performed a new installation of 2007???
Vasu Natari.

Install Oracle VM on WIndows 2003 Sevser/XP/Vista

Has any one successfully installed Oracle VM on WIndows 2003 Server or XP or Vista?
Is it possible to migrate an exisitng Oracle Express Edition database to Oracle VM? Or the Oracle Express Edition has to be installed on Oracle VM on one platform before it is portable to another machine/server.
Is there any viewlet on how to use Oracle VM?

To answer your first question: Oracle VM Server can NOT be installed on Windows.
From the OVM-FAQ:
Does Oracle VM require a host operating system?
No. Oracle VM installs directly on server hardware and does not require a host operating system.
This applies to the VM Server. For the VM Manager:
The Oracle VM Manager works on the operating system Oracle Enterprise Linux 4 Update 5 or later.
FYI - these servers are all Linux-based.
You might check the documentation in the "Virtualization Technology Center": http://www.oracle.com/technology/tech/virtualization/index.html to find some more answers.
Message was edited by:
hbokho

Installing 9i R2 on windows 2003 server.

Hi Folks,
I am planning to install 9i R2 on Windows 2003 server, i want to know what 9i specific release i should install, whether i need to install some patch ? second if some one can point me to howto 9i R2 on windows 2003 server.
TIA,
Regards,

Thank Corrado & Sybrand for the value able input, in fact we are already using 9i at production environment, while the company who have developed our application have recommended us to use 9i R2 at DB Server, in our current 9i server we have windows 2000 server, our company have planned to move to windows 2003 server while upgrade to 9i R2, later when developers will ask us to move to 10g or even 11g we will upgrade, but now we are forced to stick with 9i R2.
please advice me keeping the situation in view.
Thanks again.

Installing mini sap on windows 2003 server..............

hi friends,i want to install mini sap on windows 2003 server, i have two cds for that but i m not getting how to install this,n also want to know,can it be installed on windows 2003 server or it can be installed on windows 2000 only.
please help me out
thanks

Hi,
Depending on which mini sap version you are trying to install. If you have 2 CD's, it means that it is an old version, for starting with 6.2 mini sap comes in 3 CD's (1 Kernel + 2 Database). As for the steps to install, just insert the kernel cd and an HTML file will pop up with the steps you need to do before, during and after the installation. As for installation issues please refer to:
http://www.sap-press.com/support.cfm?account=&product=H958
Regards,
Lachker

Cant install oracle 8i in windows 2003 server

hi,
I am a newbie in Oracle.While Im trying to install Oracle 8i in Windows 2003 server , setup is not running.It didn't show anything.When trying to run from auto run, after splash screen nothing came.I formatted hard disk,changed two more hard disks,.changed machine...but cant install it in no way... It is the same case in Windows XP home edition.
But it is running in one of my friend's machine(windows 2003 server)
Please help me with valuable solutions.
Thanks in advance

Did your friend install on W2003 or upgrade from an older version of the OS?
When trying to run programs on an OS that is not certified for the programs, it is hit-n-miss whether the OS actually has the support files needed for the programs.
Think about this: the Oracle environment needs OS support in the form of DLLs and other files. The contents of the DLLs are made visible as APIs. Each time Microsoft releases patches, it is possible that the APIs that Oracle used are changed. This is extremely true when a new version of the OS is released, and even more true with stripped versions such as XP Home.
If your friend installed and then applied patches, [s]he may have hit the proper API combination. If you appled patches first, you may have skootched your APIs to the point that Oracle can not longer install.
Even if you happen to get it installed, you run the risk of getting clobbered any time you install a new Microsoft patch. The risk is minimized when you use a certified combination of the OS and application.

TS130 (1105) Driver Error in Installing Acronis Backup of Windows 2003 R2

I have run into a serires of errors which Lenovo support believes are related to the Intel Management Driver, but we have been unable to locate the appropriate drivers to deal with these error messages. The errors I have received are as follows:
PCI/VEN_8086DEV_1C02&SUBSYS_400017AA&REV_04 for Windows Server 2003 Standard
PCI/VEN_8086DEV_1C26&SUBSYS_400017AA&REV_04 for Windows Server 2003 Standard
PCI/VEN_8086DEV_1C2D&SUBSYS_400017AA&REV_04 for Windows Server 2003 Standard
halmacpi.dll required to install ACPI MultiprocessorPC (IDtandard computers) in Windows Server 2003 Standard
Support has gone through the available drivers with me but we have not found a solution. Does anyone know what to download to deal with these issues--my Acronis backup of some critical software for my business will not run without these drivers installed.
Thanks!

You must not be familiar with Acronis software.
Let me backup: I had previously purchased a Lenovo server in Dec. 2012 to rebuild my old windows 2003 OS system (a Dell). We successfully moved all the data and set up the software programs on the original Lenovo server with the sole exception of a single SQl based software program that none of the IT experts I consulted with knew how to move. I had called the company who owns the rights to that software program repeatedly in the last 1 1/2 years about the fact that my server was dying, they hadn't provided installation files, I needed to reinstall my license (which was still good) on the new server or I needed to buy a new license, they didn't return my calls.
So, then I bought a second Lenovo server two weeks ago after the old Dell server died yet again (server board this time, Dell thinks) in order to restore this program. Since I don't have installation files, and the company won't get back to me about selling me a new copy, the only way to restore the program is with Acronis, which I had used successfully in trial version for prior hardware failures of this server (this time I have the full version). Acronis does a bare metal install of the entire image of the server; however, to use universal restore onto a new hardware system, you must have the proper drivers. I keep getting errors that these three Intel drivers are missing. So, tier one Lenovo support asked me to post to this board because they couldn't help.
Kristie

Unable to install Database 10gR2 on Windows 2003

Hi,
I have Windows 2003 EE with Sp2 installed. I am trying to install Oracle Database 10gR2 but i get error when i click setup.exe.
The error is
*Error in Writing to directory C:\TEMP. Oracle Universial Installer needs you to have permission in this area to install. Installation cannot continue. Please make sure TEMP is set to a valid writable directory.*
Kindly please help me on this.

I am logged in as admin user and c:\temp is writable. However, i would also like to present one observation that i have made.
My Windows 2003 environment variable is as below
TEMP = %USERPROFILE%\Local Settings\Temp
TMP = %USERPROFILE%\Local Settings\Temp
When i use this parameter setting the error shows different path.
Error in Writing to directory E:\DOCUME~1\ADMINI~1\LOCAL~1\TEMP. Oracle Universial Installer needs you to have permission in this area to install. Installation cannot continue. Please make sure TEMP is set to a valid writable directory.
But when i change the TEMP paramaters to (i.e i add ";" at the end) then error show different path.
TEMP = %USERPROFILE%\Local Settings\Temp *;*
TMP = %USERPROFILE%\Local Settings\Temp *;*
Error in Writing to directory C:\TEMP. Oracle Universial Installer needs you to have permission in this area to install. Installation cannot continue. Please make sure TEMP is set to a valid writable directory.
Not sure why this is happening and i believe Windows 2003 SP2 new security policy is restricting me to access the TEMP directory on E:\ drive

Install Oracle 10g on Windows 2003 Server cluster (MSCS)

Hi all
How do I install Oracle 10g on Windows 2000 cluster (MSCS installed)?
I have a 2-nodes Microsoft windows 2003 server cluster and I want to install Oracle 10g,
Do I folloow this order:
1. Install the software on both without the database
2. Create the database from the first node
in this case, The second node can see the database as it is available?,
and what about the IP adresses?
If you can point me to some documentation, or help in any way, I would appreciate it.
Thanks for any help.

Read here...
http://download.oracle.com/docs/html/A96685_01/intro.htm
>>
Oracle Fail Safe comprises multiple components: Oracle Fail Safe Manager, Oracle Services for MSCS, and server components specific to Oracle Fail Safe.
>>
So I don't know how you can achieve this without Fail Safe.
There might be other link which I cannot find right now.

Installing Oracle 9i on Windows 2003 Server R2 Stansard x64 Edition

I'm trying to install Oracle 9i Release 2 (9.2.0.2.1) for 64-Bit Windows on a
Dell Server PE2950
equipped with intel(R) Xeon(R) CPU
E5405 @ 2.00GHz, 2.00GHz,
3.99 GB of RAM (It is planed to upgrade to 12 GB of RAM next week)
Running Windows 2003 Server R2 Standard x64 Edition
on install I receive message :
The image file D:\Disk1\setup.exe is valid, but is for a machine type other than the current machine.
Can you help me?

I'm not sure there is a supported version for your O/S but if there is you will find it by going to the downloads page at http://otn.oracle.com.
If there isn't I'd recommend going with a currently supported version of the product rather than one whose full support has ended.

Problem in installing 10g R2 on Windows 2003 Server

Dear all,
We have a great problem when trying to install Oracle Standard Edition 10g to Windows 2003 Server. The procedure begins fine but at some point it stops (around 17% - 20%) without any Error Window.
The install actions log finishes like that:
"INFO: Method 'dispose()' Not implemented in class 'OiSuperAdminPasswd'
INFO: config-context initialized
INFO: *** Install Page***
INFO: Only Binary inventory exists for the Home :1
INFO: FastCopy : File Version is Compatible
INFO: Install mode is fastcopy mode for component 'oracle.server' with Install type 'SE'.
INFO: Only Binary inventory exists for the Home :1
INFO: HomeSetup JRE files in Scratch :584
INFO: Setting variable 'ROOTSH_LOCATION' to 'C:\oracle\product\10.2.0\db_1\root.sh'. Received the value from a code block.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_SE_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_SE_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_SE_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_SE_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
INFO: FastCopy : The component info is ignored :oracle.swd.jre:1.4.2.8.0
INFO: FastCopy : The component info is ignored :oracle.swd.jre:1.4.2.8.0
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK"
Can anyone help with that?

Please post to the Database Installation forum:
Database Installation
This is the Oracle Applications (E-Business Suite) Installation and Upgrade forum.

Error installing Oracle 92021 on Windows 2003 Std 64x

Bit of an Oracle newb here, so someone set me strait...
I need to install a test instance of Oracle 92x, and I want to install it on my Windows Server 2003 R2 x64 system (AMD Athlon 64 X2 4400+, 4GB RAM, if it matters).
I downloaded the Windows 2003 x64 release of Oracle 9 (92021), but I can't even run the setup executable. I get:
"The image file setup.exe is valid, but is for a machine type other than the current machine."
.. as if the build was for a completely different processor architecture. I will be trying a x32 build next, but I understand x32 apps are very slow in WOW64.
What am I missing?

Ok, checked out Certify... the only certified release for my processor / OS is 10gR2... so be it. Still scratching my head that 92021 says it is for 2003 x64... oh well.
My next question is, where do I find patches? I have looked all over downloads and no luck. Certify notes that I can get "patch sets" 10.2.0.2 and 10.2.0.3.
Can someone direct me to those?
Certify output below, patch info on the very bottom
Certify - Additional Info Oracle Database - Standard Edition Version 10gR2 64-bit On Microsoft Windows 2003 (AMD64/EM64T)
Operating System: Microsoft Windows 2003 (AMD64/EM64T) Version 2003 R2
Oracle Database - Standard Edition Version 10gR2 64-bit
N/A Version N/A
Status: Certified
Product Version Note:
None available for this product.
Certification Note:
Existing patch sets:
10.2.0.2
10.2.0.3

Error Installing patch 6272725 on Windows 2003 server

Hi all,
I am trying to install the RUP3 patch on Windows 2003 server. I am getting the following error when installing patch 6272715 which is required to be installed before installing patch 6141000. If i continue installing patch 6141000 after ignoring this error, i get same error during installation of patch 6141000. Please can any one suggest me what i should do to get rid this error.
AD utilities can support a maximum of 999 workers. Your
current database configuration supports a maximum of 83 workers.
Oracle recommends that you use between 2 and 4 workers.
Enter the number of parallel workers [2] :
AutoPatch will run in parallel mode.
Did not need to apply new applterr.txt.
Applying new applprod.txt (if any)...
Did not need to apply new applprod.txt.
Performing version checking for driver files...
Log and Info File sync point:
Mon Nov 26 2007 12:33:27
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
Copying driver files into installation area...
No driver files were selected for copying.
Skipping...
ForceCopy driver files into installation area for Specified driver
since no such action is present for this driver file
Screening out files not valid for this installation...
Determining valid on-site files...
Extracting object modules from product libraries...
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
aiosp2() Error: failure in usdspn()
Contents of error buffer are:
"usdsop cannot create a new process
Cause: usdsop encountered an error creating a new process. [Reason].
Action: Check that your system had enough resources to start a new process. Cont
act your system administrator to obtain more resou (RE"
An error occurred while extracting files from library.
Continue as if it were successful [No] :
--- Thank You.

Sir,
I am posting the output as told by you.
G:\>which ls
ls: Command not found.
G:\>c:
C:\>ls
'ls' is not recognized as an internal or external command,
operable program or batch file.
C:\>cd e:\cygwin\bin
C:\>e:
E:\cygwin\bin>which ls
ls: Command not found.
E:\cygwin\bin>
I am also posting the output of adadmin utility in which i tried ti relink FND programs
Enter list of products to link ('all' for all products) [all] :
Generate specific executables for each selected product [No] ?
AD Administration can relink your Oracle Applications programs with debug
information. Oracle recommends that you do not relink your programs
with debug information unless asked to do so by Oracle Support Services.
Relink with debug information [No] ?
Relinking selected modules in Application Object Library.
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 33: a
wk: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 203:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 534:
cat: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 548:
awk: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 573:
cat: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 575:
rm: command not found
Usage: adrelink force=y [<optional args>] <targets>
or: adrelink force=y [<optional args>] filelist=<file>
where <targets> = { <product module> [<product module>] ... }
and <product module> = "<product> <module name>"
- <product> should be in lower case
- <module name> should exactly match the executable name
Valid <optional args> are:
envfile=adsetenv.sh
Used only by the 'adsetup' script
link_debug=y
Will we link executables with debug or not? Default is 'n'
backup_mode=none
Which executables will we back up when linking with force=y?
Default is 'file'. Meanings are:
- none: do not back up any executables
- all : back up all executables
- file: do what $APPL_TOP/admin/adlinkbk.txt says to do
Type 'adrelink examples' to see some examples of running adrelink.
An error occurred while relinking application programs.
Continue as if it were successful [No] :
It is clear that there is some problem with Cygwin. I have renamed the following executabes after the cygwin installation.
gcc to cc
egrep to grep
gawk to awk
gnumake to make
i have also copied which.exe to "Windows\system32" directory from "cygwin\bin" folder and
Copy LINK.exe to "Windows\system32" directory from "VC98" directory.
Please tell me if there is something wrong with Cygwin installation.

Installing Photoshop in a Windows 2003 server

Although Adobe only supports PS installation on Windows XP or Vista, is there a way to get it installed on a Windows 2003 Server operating system?

Search the forum. There's a hack that's been discussed. Don't expect any
support for it though.
Bob

Installing crystal 2008 on windows 2003 64 bit Itanium server

We just purchased crystal 2008. We want to install the crystal runtime on windows 2003 itanium 64bit.
After install. the reports give crystal run time error.

what about:-
https://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=10880598
Oracle® Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (64-Bit) on Intel Itanium DVD (Part 1 of 5) B24898-01 Part 1 of 5 522M
Oracle® Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (64-Bit) on Intel Itanium DVD (Part 2 of 5) B24898-01 Part 2 of 5 566M
Oracle® Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (64-Bit) on Intel Itanium DVD (Part 3 of 5) B24898-01 Part 3 of 5 435M
Oracle® Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (64-Bit) on Intel Itanium DVD (Part 4 of 5) B24898-01 Part 4 of 5 595M
Oracle® Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (64-Bit) on Intel Itanium DVD (Part 5 of 5) B24898-01 Part 5 of 5 583M

Installing MX 7 on Windows 2003

Similar Messages

Maybe you are looking for