Installing Netgear Adapter

Trying to confirm this, if my PB G4 recognizes a PCMCIA network card, then the device will show up in the Network Device list in System Preferences?
I have plugged a card in, installed the software for it, and in Network the only things I see are the standards - Airport, Bluetooth, Internal Modem, etc. The card is a Netgear WN511B, and I installed RALINK drivers. Not sure they will work. I've never used an adapter card in my Mac before, so I just want to be sure I know where to look for the card.
tia, jrh

Hi abrogard,
Welcome to Telstra
Regarding the new modem, in most cases you will need to use the Telstra modem
The exceptions can be found on the following list https://www.telstra.com.au/broadband/adsl-cpe-equipment
You won't need to install the new modem until the transfer has taken place, you can track your order online https://www.my.telstra.com.au/myaccount/track-my-order
If you have account, or order specific questions you can chat with us securely via the following link http://tel.st/49kl
Angela

Similar Messages

How do I install Netgear XE102 on my iMac? It will not install off of the cd provided it appears to be only for Windows based computers. Checked Netgear website and could not find a setup.exe file for Mac.

Unable to install Netgear XE102 on my iMac. Checked Netgear website and could not find a setup.exe file for Mac.

That means either no software needs to be installed on a Mac or the product is incompatible with Macs. Contact NetGear tech support for help.

Surface Pro 3 / "Windows did not detect a properly installed network adapter"

Hi all,
I've been running the Windows 10 Technical Preview (9926) on my Surface Pro 3 successfully
since January. Unfortunately, I lost all internet connectivity today.
The problem started when I noticed the type cover wasn't working (pressing keys on the type
cover wasn't registering any typing on my screen) and my USB mouse wasn't working either. I tried removing and reattaching the type keyboard but this didn't fix the issue. I had to use the accessibility on-screen keyboard to sign into Windows (thankfully touch
was still working). Once I signed in, I still didn't have typing or cursor ability, so I decided to restart the computer.
Then it got worse. I noticed the Surface Pro 3 was stuck on "restarting" and wouldn't
actually restart. Since it wasn't responding, I held down the power button for about 10 seconds until it turned off. When I turned it back on, the type cover and mouse started working again.
Unfortunately, this is when the WIFI problems began. I had WIFI for a few seconds, and then
I lost internet. I disconnected/reconnected but there was a yellow triangle telling me there was some sort of problem. So I restarted the Surface Pro 3.
When it came back on, there were suddenly NO connections available at all. Opening the "Network
& Internet" settings page gave me the message "Windows did not detect a properly installed network adapter". And here I am, without internet on my Surface Pro 3, borrowing my friend's computer so I can type this message (he is also running
Windows 10 build 9926 on his laptop and is able to connect to my WIFI with no problems, whereas my Surface Pro 3 cannot even detect any networks). I have not dropped or damaged the SP3 in any way, and there have been no storms or power outages or anything
of that sort. Any ideas what could have happened to the WIFI on my Surface Pro 3?
Thanks for your help...
Ethan

Hi Ethan,
Currently, there are a few compatibility issue between the current hardware and Windows 10 Technical Preview (9926 build), this is mostly related to driver compatibility issue.
I suggest you download the latest network adapter driver package to install, when it is finished, check if it appears under Device Manager.
Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs
https://www.microsoft.com/surface/en-us/support/networking-and-connectivity/install-wireless-drivers
You can check if you can install the latest firmware package for your device.
Here is an article to talk about such things:
Windows 10 January Technical Preview on Surface
https://www.microsoft.com/surface/en-us/support/install-update-activate/windows-technical-preview#Known
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to install IDOC adapter

Hello friends
I need help installing IDOC adapter.... I installed XI connectivity and I am able to view RFC, SOAP, JMS and File adapters. Our team says they need IDOC adapter. I could not find any installation document to install IDOC adapter. I checked Adapter and online documentation. Appreciate any help.
Thank You
Raghu

Hi!
> I am with the impression that I need to run
> "install_idocadapter" under tech_adapter and then I will
> be able to see it under the list of adapters in the
> adapter engine screen
No, the IDoc adapter is not configured in the adapter engine but in the transactions IDX1 and IDX2.
-> http://help.sap.com/saphelp_xi20sr1/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Regards, Tanja

IMac Running Windows 7 can't 'detect a properly installed network adapter'

I just put windows 7 on my brand new iMac 27'' i7, but to my surprise I cannot connect to a wireless network, and when I go to the trouble shooting section it says-
"Windows did not detect a properlu installed network adapter. If you have a network adapter, you will need to re-install the driver."
Help me to connect to the internet please.

Install the Apple drivers; read the guide.
You should have Lion so you would have Boot Camp 4.0
Boot Camp 4.0 Installation & Setup Guide OS X Lion
Boot Camp 4.0, OS X Lion: Frequently asked questions

Yoga 2 did not detect a properly installed network adapter

Woke up this morning, turned my yoga 2 on, no WiFi. So I used the troublsheeter and it told me there was no properly installed network adapter. Does that mean my wifi card is dead? Anyone else have an issue like this and find a solution (besides replacing a dead card?)
I did:
1) reinstalle drivers via usb from another machine
2) used a system restore point from a few days ago
Neither action had any effect.

Well I just set it to airplane mode and while I had no wifi it never told me that there was no network adapter cofigured.
Also, when you set it to airplane mode the wifi signal icon changes from bars to an airplane.
I think the adapter must have stopped working and then.. started working again. I can't figure out what else it could be.

Error Installing Biztalk Adapter for Enterprise (BT2013)

Hi everybody,
I'm attempting to install the adapter for enterprise application, the machine is a win7-64 (phisical) and previously in this laptop had BT 2010. I guess that is something related to the previous version of BizTalk.
The message is:
"An error occured while applying security settings. Users is not a valid user o group. This could ba a problem with tha package, or a problem connecting to a domain controller on the network"
This machine is a sandbox and the user that is running the setup is part of the administrator's group of the machine and is part of the company domain (AD), and the machine is connected to the net.
In advance, I Apreciate your help.
Thanks in advance,
Luis Cardozo

Hi Luis,
Have you verified that the user is member of Biztalk groups ?I think you need to add the user to biztalk group such as Biztalk Administrator ,SSO Administrator etc prior to running the setup .
Another way around is to create groups manually .
perform the following steps and run the installation again:
Create a new user called CREATOR OWNER (Type this command on the command prompt – net user "CREATOR OWNER" /add)
Create a new group called Users (Type this command on the command prompt – net localgroup Users /add)
You can find detailed document at
link here
Thanks
Abhishek

Launchpad layout resetted after installing Netgear Genie. How to undo?

After installing netgear genie my launchpad layout got resetted as if you buy a new mac, with on the other pages all other applications sorted by name. Really annoying. Cant find the .app of the genie app, the app isnt in the applications folder, nowhere on my HDD. It is in my lauchpad though.
How can I uninstal this piece of bad software and gat my launchapad layout back to normal?

I had the same problem, Just happened the 2nd time to me with new upgrade. I had to go back and re do all my folders and arrange my apps again, relay *****. Never again, un installed Net gear Genie.

"Failed to install network adapter - check WINBOM"

Hello,
two weeks ago my network adapter and my soundcard ran away. I brought the laptop to an IBM premium partner, where the mainboard was changed with a notice all would be ok, but with a hint of the service technican that I should try to recover; the problem is still not solved. Yesterday I recovered from a very old version, when the network adapter and sound card worked properly. Since then my sound card works, but only with cracks. That is of course not acceptable. The network card does not work anyway.
When I boot my laptop with the ACCESS IBM button I get an error message from FACTORY.EXE "Failed to install network adapter -- check WINBOM"
I checked them, but there is no factory.exe on my hdd, as well as there is no winbom.ini on my hdd. I only found the and empty entry winbom in the registry.
In the system manager there is no network adapter listed (instead of the wireless ones). No way to install one.
I do not know what to do now. May someone think there is a solution available for my thinkpad or should I sent it to IBM/Lenovo?
The machine is a T43p 2668 PEG.
Cheers,
Herwig
Solved!
Go to Solution.

Welcome to the forum!
I'm surprised that the Business Partner hasn't offered to re-install the OS for you, but then again it may be a local practice that I wouldn't be familiar with.
Try borrowing/downloading a copy of a "live" Linux CD (Mint works out of the box on any T43/p with ATi) and see whether the issues persist there.
If they do, hardware is defective and you'll need to send it back in for another repair.
If they don't, re-installing XP from scratch, after saving the important stuff on media, is the way to go IMHO.
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

I have an Imac G4 and would like to install USB adapter for wireless internet connectivty. Is this possible with my system ?

I have an iMac G4 and I am wondering if i could connect it wirellesly to an existing router I have for a PC, using an internet USB adapter ? Would my system be compatible with such hardware ?

Thanks RC for your reply.
My router is a Netgear WGR614 v8. Not sure what the encryption is, but i wantto say 128 bit.
Here's more info on the iiMac:
The Apple iMac G4/1.0 17-Inch (Flat Panel) features a 1.0 GHz PowerPC 7445 (G4) processor with the AltiVec "Velocity Engine" vector processing unit and a 256k on-chip level 2 cache, 256 MB of RAM (266 MHz PC2100 DDR SDRAM), an 80.0 GB Ultra ATA/100 hard drive (7200 RPM), a tray-loading 4X "SuperDrive", NVIDIA GeForce4 MX graphics with 64 MB of DDR SDRAM (AGP 4X support), and support for AirPort Extreme (802.11g) and Bluetooth with optional cards.
The internal components are housed in an attractive 10.6" half-sphere, ice white case with a chromed stainless steel neck that supports a 17" TFT Active Matrix LCD display. This model shipped with MacOS X 10.2 "Jaguar" (and cannot boot into MacOS 9), as well as an ice white Apple Pro Keyboard, Mouse, and Speakers. Unlike some earlier iMac models that are convection-cooled, the iMac "Flat Panel" series is cooled by a quiet internal fan.
Introduction Date:
February 4, 2003
Discontinued Date:
September 8, 2003
Processor Speed:
1.0 GHz
Processor Type:
PowerPC 7445 (G4)
Details:
The PowerPC G4 includes the AltiVec "Velocity Engine" vector processor.
Processors:
1
Geekbench:
539
Processor Upgrade:
Soldered
FPU:
Integrated
System Bus Speed:
133 MHz
Cache Bus Speed:
1.0 GHz (Built-in)
ROM/Firmware Type:
Open Firmware
ROM/Firmware Size:
1 MB
L1 Cache:
64k
L2/L3 Cache:
256k (on-chip)
RAM Type:
PC2100 DDR SDRAM
Min. RAM Speed:
266 MHz
Details:
This system uses 266 MHz PC2100 DDR SDRAM (2.5v) memory modules. Also see: How do you upgrade the RAM in the iMac G4 models? How much RAM of what type do these systems support?
Standard RAM:
256 MB
Maximum RAM:
2 GB*
Details:
*Apple reports that this model can support 1 GB of RAM. However, "unofficially" it can support 2 GB of RAM. Site sponsor Other World Computing sells iMac memory, as well as hard drives, accessories, and other upgrades.
Also see: Actual Max RAM of All G3 & Later Macs.
Motherboard RAM:
None
RAM Slots:
2*
Video Card:
GeForce4 MX
VRAM Type:
DDR SDRAM
Details:
Shipped with a "NVIDIA GeForce4 MX graphics processor with AGP 4X support". Also see: What type of video processor is provided by the iMac G4? Is it upgradable?
Standard VRAM:
64 MB
Maximum VRAM:
64 MB
Built-in Display:
17.0" TFT
Native Resolution:
1440x900
Details:
This model has a 17.0" TFT active matrix display with a native resolution of 1440x900. It also supports "1152 by 720, 1024 by 640, and 800 by 500 pixels at 16:10 aspect ratio; [and] 1024 by 768, 800 by 600, and 640 by 480 pixels at 4:3 aspect ratio." Apple reports a "typical" brightness of 200 cd/m, contrast ratio of 300:1, and viewing angle of 120 degrees horizontal and 90 degrees vertical. Site sponsor Mission Repair offers free diagnosis of iMac hardware problems and a 24-hour repair service for this iMac. Display repacement, keyboard replacement, a hard drive upgrade service, and more are provided.
2nd Display Support:
Mirroring Only*
2nd Max. Resolution:
1024x768*
Details:
Apple reports that this system has a "mini-VGA output port for video mirroring on [an] external display or projector (requires Apple VGA Display Adapter, sold separately)." and supports output resolutions of "640 by 480 pixels at 60 Hz, 800 by 600 pixels at 75 Hz, and 1024 by 768 pixels at 75 Hz". However, the hardware is capable of using an external display in dual or "extended desktop mode", Apple just blocked the capability in firmware to protect sales of more expensive Macs. Unsupported third-party hacks are available.
Standard Hard Drive:
80 GB (7200 RPM)
Int. HD Interface:
Ultra ATA/100
Standard Optical:
4X "SuperDrive"
Standard Disk:
None
Details:
Apple reports that the tray-loading DVD-R/CD-RW SuperDrive "writes DVD-R discs at 4x speed, reads DVDs at 8x speed, writes CD-R discs at 16x speed, writes CD-RW discs at 8x speed, [and] reads CDs at 32x speed." Also see: What are the capabilities of the optical drive provided by the iMac G4 models? How do you replace or upgrade the optical drive?
Standard Modem:
56k v.92
Standard Ethernet:
10/100Base-T
Standard AirPort:
802.11b/g (Optional)
Standard Bluetooth:
1.1 (Optional)
USB Ports:
3 (1.1)
Firewire Ports:
2 (400)
Details:
This system has three USB 1.1 ports (shared on two 12-Mbps controllers) and two Firewire "400" ports (eight watts shared). Apple advertised that this computer had five USB 1.1 ports, counting three on the system and two on the keyboard. Also see: Complete Ports.
Expansion Slots:
AP/BL
Expansion Bays:
None
Details:
This model has expansion slots for AirPort Extreme (802.11b/802.11g) and Bluetooth.
Site sponsor Blue Raven sells parts for this specific iMac including the logic board, LCD, keyboard, case parts, latches, hinges, adapters and more.
Incl. Keyboard:
Apple Pro Keyboard
Incl. Input:
Apple Pro Mouse
Case Type:
All-in-One
Form Factor:
iMac G4 17" Flat Panel
Apple Order No:
M8935LL/A
Apple Subfamily:
iMac 17" 1 GHz
Apple Model No:
M6498 (EMC N/A)
Model ID:
PowerMac6,1
Details:
Please note that these identifiers refer to more than one model.
Also see: All Macs with the M6498 Model Number, the N/A EMC Number, and the PowerMac6,1 Model Identifier.
For more about these identifiers and how to locate them on each Mac, please refer to EveryMac.com's Mac Identification section.
Battery Type:
3.6V Lithium
Battery Life:
N/A
Pre-Installed MacOS:
X 10.2.3
Maximum MacOS:
X 10.5.8
MacOS 9 Support:
Classic Mode Only*
Windows Support:
Emulation Only
Details:
*This model is capable of using MacOS 9 applications within the MacOS X "Classic" environment provided with MacOS X 10.4.11 "Tiger" and lower ("Classic" is not supported starting with MacOS X 10.5 "Leopard"). It cannot boot into MacOS 9. Site sponsor OHS specializes in heavily upgraded Macs capable of running both MacOS X and MacOS 9 applications.
Dimensions:
13.03 x 16.7 x 10.6*
Avg. Weight:
22.8 lbs. (10.4 kg)
Original Price:
US$1799
Est. Current Retail:
US$250-US$400
Details:
Please note that on average the estimated current retail pricing of used systems is updated twice a year (please refer to the date on the bottom of the page for the date last updated). Photo Credit: Apple Computer.
Does this additional info help ?
Thanks again
Jeff

Error while installing network adapter driver on HP ML 370 G4

We have HP ML 370 G4 server. And I get an error while installing driver for embedded network adapter on Solaris 10.
I don't know what to do...
Can anybody help me??
# pkgadd -d /tmp/BRCMbcme.pkg
The following packages are available:
1 BRCMbcme Broadcom NetXtreme Gigabit Ethernet Adapter Driver
(i386) v7.5.12
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: 1
Processing package instance <BRCMbcme> from </tmp/BRCMbcme.pkg>
Broadcom NetXtreme Gigabit Ethernet Adapter Driver(i386) v7.5.12
Copyright (c) 2001-2003 Broadcom Corporation, Inc.
All rights reserved.
This product is protected by copyright and distributed under
licenses restricting copying, distribution and decompilation.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
6 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <BRCMbcme> [y,n,?] y
Installing Broadcom NetXtreme Gigabit Ethernet Adapter Driver as <BRCMbcme>
## Installing part 1 of 1.
/kernel/drv/bcme
/kernel/drv/bcme.conf
/usr/share/man/sman7d/bcme.7d
[ verifying class <none> ]
## Executing postinstall script.
("pci14e4,1644") already in use as a driver or alias.
postinstall: add_drv bcme failed
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <BRCMbcme> failed.
#

If you're sure that you have a Broadcom BCM57xx
device installed in the machine, then you should have a look at
"prtconf -pv" output, locate the Ethernet device, and check the
"vendor-id" / "device-id" property for the NIC.
If the Broadcom device is compatible with Sun's "bge" driver, you
can try to install an addition driver binding entry for your device,
using the update_drv(1M) command
update_drv -a -i '"pciVVVV,DDDD"' bge(where VVVV and DDDD is the pci vendor / device id found in
prtconf -pv output).

Trying to install wifi adapter but NM say no

As titled, trying to revive older Dell with XP sp3 for shop. Installed linksys with speedbooster wusb546s ver2. Nice, as its got a long enough cord to set by window and get signal from house. However NM says it cant add because 'other software' controlling adapter?? only way is disabling all securities,
So I went and got a Dlink dwa-131 but same issue except it doenst get signal unless desk top setting in window, (another non option).
I have a wrt120n router, network magic (I know no longer supported) DSL connection. Have IPAD, IPOD, BluRay player, HP laptop w/7 64bit wifi, Compac with XP sp3 (cabled to router), Dell laptop w/vista 32 wifi, HP wireless printer. trying to add Dell with XPsp3, but adding the adapters software conflicts with NM?
Tried unstalling adapter software and loading drivers-got it to connect but as noted only with network wide open (so software wasnt involved)
Is there a simple way to add a computer using a usb wifi adapter-thats compatible with NM? Ive never had an issue adding stuff but this adapter thing simply has me stumped because of the software. Ive looked around but cant find any real info.
Mark
Solved!
Go to Solution.

Possible that the conflict is with the wireless utilities installed on the computer and the utility which the network magic software is supporting. But from what I know, you should be able to add a device no matter what the utility is being used. Mostly for dell laptops, they have dell wlan card utility on them. For windows laptops, they also have a windows based wireless utility which is called wireless zero configuration. Usually for dell laptops, the dell wireless utility is the default utility that is enabled. I suggest that you disable the dell wireless wlan utility. To do it: right click on the dell icon at the bottom right corner of the screen, click on open dell utility, uncheck let this tool manage your wireless settings, then click apply and then ok. After the utility has been disabled, try to connect to your network using the windows wireless utility (this link will guide you). After connecting to your network using the windows utility, try to add the computer then to the network magic software.

Installing seeburger adapter

Hallo,
have anybody experiences with installing and running the seeburger adapter? The installing have bad impacts of the whole system? What are the problems?
Thanks for in advance,
Frank

Hi Frank,
Just see if these links help you in anyways:
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
Regards,
abhy

Re-install DB Adapter

Hi All,
We are having issues with a DB Adapter. We had added another connection manager and data source and now the Adapter is throwing errors when we try to update it and the status is "Prepared". Nothing we have done seems to reslove the issue. Within the UI can we "uninstall" the dbadapter and the re-install it?
Any suggestions would be greatly appreciated....just concerned htat removing it would be permanent.
Thanks,
S

Check the server/domain log file for the errors while updating adapter and paste the same here.
Regards,
Anuj

How to install network adapter driver?

My Dell xps internet was working fine yesterday (wired connection) but then all of a sudden the internet stopped working even though the cat6 was plugged in to the router. I tried different cables to see if the cable was faulty but it turns out that my network adapter is missing a driver. I checked what network adapters are inside my motherboard but its come up with like 12 different network adapters. How do I know which one i should install the driver for? Also where can i find the correct driver to install?
I should also note i set my pc back to a date which it was in 4 years ago since it was really slow and i wanted to improve its performance.
I searched all over the web to find solution to my problem but none of the solutions at hand worked. 1 solution was to change the properties on my "Local Area Connection" but i haven't even got "Local Area Connection" icon for some reason (i have never seen a computer not have this icon before". It is like my computer is completely not picking up the connection from the router and even worse its as if its repelling it...
Anyways, signed up to this forum to see if one of you guys could help out :).

Sorted it now. Had to go into BIOS and enable internet connection.

Installing Netgear Adapter

Similar Messages

Maybe you are looking for