Installing Network Adapter in Solaris (SPARC)

As I understand, HCL is only for x86 Solaris.
And what about analog for SPARC?
Actually, which Models of PCI Network Adapters can I install into my SPARC, and Solaris will support it?

Hello Vassiliy,
please don't double post !
Please read my answer to your enquiry
There is no elxl driver in /dev directory...
http://forum.sun.com/thread.jspa?threadID=21382
The supported Sun Hardware is listed in the Sun System Handbook / Full Components List of your system, for example Blade 2500
http://sunsolve.sun.com/handbook_pub/Systems/SunBlade2500/components.html
Actually, which Models of PCI Network Adapters can I install into my SPARC, and Solaris will support it?
Information about 3rd-party Hardware can be found on the following page
Third Party I/O Solutions
http://www.sun.com/io_technologies/ihvindex.html
Michael

Similar Messages

Error while installing network adapter driver on HP ML 370 G4

We have HP ML 370 G4 server. And I get an error while installing driver for embedded network adapter on Solaris 10.
I don't know what to do...
Can anybody help me??
# pkgadd -d /tmp/BRCMbcme.pkg
The following packages are available:
1 BRCMbcme Broadcom NetXtreme Gigabit Ethernet Adapter Driver
(i386) v7.5.12
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: 1
Processing package instance <BRCMbcme> from </tmp/BRCMbcme.pkg>
Broadcom NetXtreme Gigabit Ethernet Adapter Driver(i386) v7.5.12
Copyright (c) 2001-2003 Broadcom Corporation, Inc.
All rights reserved.
This product is protected by copyright and distributed under
licenses restricting copying, distribution and decompilation.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
6 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <BRCMbcme> [y,n,?] y
Installing Broadcom NetXtreme Gigabit Ethernet Adapter Driver as <BRCMbcme>
## Installing part 1 of 1.
/kernel/drv/bcme
/kernel/drv/bcme.conf
/usr/share/man/sman7d/bcme.7d
[ verifying class <none> ]
## Executing postinstall script.
("pci14e4,1644") already in use as a driver or alias.
postinstall: add_drv bcme failed
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <BRCMbcme> failed.
#

If you're sure that you have a Broadcom BCM57xx
device installed in the machine, then you should have a look at
"prtconf -pv" output, locate the Ethernet device, and check the
"vendor-id" / "device-id" property for the NIC.
If the Broadcom device is compatible with Sun's "bge" driver, you
can try to install an addition driver binding entry for your device,
using the update_drv(1M) command
update_drv -a -i '"pciVVVV,DDDD"' bge(where VVVV and DDDD is the pci vendor / device id found in
prtconf -pv output).

Surface Pro 3 / "Windows did not detect a properly installed network adapter"

Hi all,
I've been running the Windows 10 Technical Preview (9926) on my Surface Pro 3 successfully
since January. Unfortunately, I lost all internet connectivity today.
The problem started when I noticed the type cover wasn't working (pressing keys on the type
cover wasn't registering any typing on my screen) and my USB mouse wasn't working either. I tried removing and reattaching the type keyboard but this didn't fix the issue. I had to use the accessibility on-screen keyboard to sign into Windows (thankfully touch
was still working). Once I signed in, I still didn't have typing or cursor ability, so I decided to restart the computer.
Then it got worse. I noticed the Surface Pro 3 was stuck on "restarting" and wouldn't
actually restart. Since it wasn't responding, I held down the power button for about 10 seconds until it turned off. When I turned it back on, the type cover and mouse started working again.
Unfortunately, this is when the WIFI problems began. I had WIFI for a few seconds, and then
I lost internet. I disconnected/reconnected but there was a yellow triangle telling me there was some sort of problem. So I restarted the Surface Pro 3.
When it came back on, there were suddenly NO connections available at all. Opening the "Network
& Internet" settings page gave me the message "Windows did not detect a properly installed network adapter". And here I am, without internet on my Surface Pro 3, borrowing my friend's computer so I can type this message (he is also running
Windows 10 build 9926 on his laptop and is able to connect to my WIFI with no problems, whereas my Surface Pro 3 cannot even detect any networks). I have not dropped or damaged the SP3 in any way, and there have been no storms or power outages or anything
of that sort. Any ideas what could have happened to the WIFI on my Surface Pro 3?
Thanks for your help...
Ethan

Hi Ethan,
Currently, there are a few compatibility issue between the current hardware and Windows 10 Technical Preview (9926 build), this is mostly related to driver compatibility issue.
I suggest you download the latest network adapter driver package to install, when it is finished, check if it appears under Device Manager.
Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs
https://www.microsoft.com/surface/en-us/support/networking-and-connectivity/install-wireless-drivers
You can check if you can install the latest firmware package for your device.
Here is an article to talk about such things:
Windows 10 January Technical Preview on Surface
https://www.microsoft.com/surface/en-us/support/install-update-activate/windows-technical-preview#Known
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

IMac Running Windows 7 can't 'detect a properly installed network adapter'

I just put windows 7 on my brand new iMac 27'' i7, but to my surprise I cannot connect to a wireless network, and when I go to the trouble shooting section it says-
"Windows did not detect a properlu installed network adapter. If you have a network adapter, you will need to re-install the driver."
Help me to connect to the internet please.

Install the Apple drivers; read the guide.
You should have Lion so you would have Boot Camp 4.0
Boot Camp 4.0 Installation & Setup Guide OS X Lion
Boot Camp 4.0, OS X Lion: Frequently asked questions

Yoga 2 did not detect a properly installed network adapter

Woke up this morning, turned my yoga 2 on, no WiFi. So I used the troublsheeter and it told me there was no properly installed network adapter. Does that mean my wifi card is dead? Anyone else have an issue like this and find a solution (besides replacing a dead card?)
I did:
1) reinstalle drivers via usb from another machine
2) used a system restore point from a few days ago
Neither action had any effect.

Well I just set it to airplane mode and while I had no wifi it never told me that there was no network adapter cofigured.
Also, when you set it to airplane mode the wifi signal icon changes from bars to an airplane.
I think the adapter must have stopped working and then.. started working again. I can't figure out what else it could be.

"Failed to install network adapter - check WINBOM"

Hello,
two weeks ago my network adapter and my soundcard ran away. I brought the laptop to an IBM premium partner, where the mainboard was changed with a notice all would be ok, but with a hint of the service technican that I should try to recover; the problem is still not solved. Yesterday I recovered from a very old version, when the network adapter and sound card worked properly. Since then my sound card works, but only with cracks. That is of course not acceptable. The network card does not work anyway.
When I boot my laptop with the ACCESS IBM button I get an error message from FACTORY.EXE "Failed to install network adapter -- check WINBOM"
I checked them, but there is no factory.exe on my hdd, as well as there is no winbom.ini on my hdd. I only found the and empty entry winbom in the registry.
In the system manager there is no network adapter listed (instead of the wireless ones). No way to install one.
I do not know what to do now. May someone think there is a solution available for my thinkpad or should I sent it to IBM/Lenovo?
The machine is a T43p 2668 PEG.
Cheers,
Herwig
Solved!
Go to Solution.

Welcome to the forum!
I'm surprised that the Business Partner hasn't offered to re-install the OS for you, but then again it may be a local practice that I wouldn't be familiar with.
Try borrowing/downloading a copy of a "live" Linux CD (Mint works out of the box on any T43/p with ATi) and see whether the issues persist there.
If they do, hardware is defective and you'll need to send it back in for another repair.
If they don't, re-installing XP from scratch, after saving the important stuff on media, is the way to go IMHO.
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Trying to set-up the network adapter in Solaris 11 under Hyper-V fails

I was using Virtual Box to run Solaris 11 for testing purposes, however VB was disappointing as my VM hanged too often so now I am evaluating Hyper-V under Windows 8 Pro. If I can get the network to work I will use Hyper-V even if it lacks seamless mouse
and keyboard integration. So, I installed Solaris 11 in Hyper-V but I cannot get the network to work. What I have done:
- I have created a Virtual Switch of type External with Virtual Switch Manager
- I have created a Legacy Network Adapter for my virtual solaris machine
- in Windows 8 I have created a Bridge for my WiFI NIC and the Virtual Switch
I can access the internet from my host machine (windows 8)but I cannot do it from the guest (solaris)
If I type "ipadm" in my solaris's terminal I can see that the NIC is listed but it has no IP address. So how can I assign an IP address to the Legacy Network Adapter?
Thanks

Hi Brian,
Thanks for the reply. I have managed to get networking working by creating a legacy card attached to a virtual switch, but I have not used the bridging anymore, instead I simply shared in the host OS the wifi connection to the virtual switch. This way it works.
Now I have another problem with the Solaris guest OS not seeing the SCSI controller, but I'll open a new thread for this after some more testing.
Thank You
Codrut

How can I set ne2000 network adapter in Solaris 8 for x86

I am a beginner. I can not set a ne2000 compatible network adapter(isa) in Solaris 8 for x86.
I do follows:
write the file ' /kernel/drv/nei.conf ' with ' name="nei" parent="isa" reg=0x1,0x0300,0x1f interrupts=10 '
and use the command: drvconfig -i nei --failed
use the command: drv_add -i nei; devlinks; --there is no the command drv_add
use the command: touch /reconfigure; reboot
after reboot, use the command: ifconfig nei0 plumb --failed
Did I miss something obvious, or what driver should I use?

After backing up the suspect hard drive, I ran Disk Repair on it and found no problems. Then ran Disk Warrior again and no problems. It is a Hitachi, btw.
As for the PrefPane issue: Repairing disk permissions on the main volume and on the partition that holds the system did not make any difference.
Reinstalled the 10.5.8 upgrade, performed safe start and then repaired permissions again. Still getting a blank PrefPane for network.
Next step is to try and trash the System Configuration plist and Network Interfaces plist.

How to install network adapter driver?

My Dell xps internet was working fine yesterday (wired connection) but then all of a sudden the internet stopped working even though the cat6 was plugged in to the router. I tried different cables to see if the cable was faulty but it turns out that my network adapter is missing a driver. I checked what network adapters are inside my motherboard but its come up with like 12 different network adapters. How do I know which one i should install the driver for? Also where can i find the correct driver to install?
I should also note i set my pc back to a date which it was in 4 years ago since it was really slow and i wanted to improve its performance.
I searched all over the web to find solution to my problem but none of the solutions at hand worked. 1 solution was to change the properties on my "Local Area Connection" but i haven't even got "Local Area Connection" icon for some reason (i have never seen a computer not have this icon before". It is like my computer is completely not picking up the connection from the router and even worse its as if its repelling it...
Anyways, signed up to this forum to see if one of you guys could help out :).

Sorted it now. Had to go into BIOS and enable internet connection.

Apple itunes installed network adapter and wiped my wireless out

On Windows Vista x64, I tried to take the update for itunes and it said it failed, to try download only (which has not been working either for me over past year; I always have to uninstall and go to the site to download/install it myself). But my internet stopped working 5 days ago (my wireless adapter inside laptop cannot find any networks ever; nor did my ethernet connection work to overcome this) and my first line of defense was to use sys restore; low and behold, there was an entry for the time period it stopped working that "apple network adapter installed" but no matter which restore point I tried to use anywhere around that event, it always came back with errors and stated no changes were made; still no internet either.
I have uninstalled the hardware thru device manager and tried to let windows reinstall it with drivers, but that doesn't fix it either. I even downloaded onto a flash drive the original driver that has since been updated by Intel for my Intel Link 5100 wireless adapter, but still it will not work. The ethernet did start working once I installed the old original driver for it, but even last night I got the error while plugged into my router "limited connectivity" meaning no internet. I then tried uninstalling all apple programs and kept being blocked from doing so (sounded viral to me so I ran norton power eraser, spoke with support, even used couple other programs for spyware malware bootkit/rootkit etc). Now I finally got all the programs uninstalled, cleaned the registry, and still I cannot get the wireless adapter to work.
I have spent days on this issue, seeing other discussions over the past few years where this has happened before (an update with apple's network adapter installs and wipes out the actual hardware adapter) but each time it only affects certain models of wireless/ethernet adapters. Guess this update got mine. I am trying NOT to have to restore my computer to factory condition as it is over 2 years old and that will mean millions of updates to all microsoft programs, drivers, etc.
Does anyone have any ideas that will fix this? I can send you my specs if you need them.
Sheila

Thx for the suggestion, but this is the post I originally found and figured out what went wrong, However, as I stated in my question post, I have not only uninstalled, scanned for hardware changes (w/o reboot) and rebooted and watched windows install device drivers for both lan & wifi, yet the wifi absolutely will not work now. I have the ethernet working since installing the old original driver, and today I was able to actually get back up to the last wifi driver from intel I had before itunes wiped it out. But still no wifi. My intel program and intel's system checker I used on their website states:
WIRELESS NETWORKING INFORMATION
Wireless Networking Product
Intel® WiFi Link 5100
Driver Version
13.4.0.9
Intel PROSet/Wireless Version
not detected
Software/Driver Status
Newer Driver Available
Latest version available
13.5.0
Hardware IDs
PCI\VEN_8086&DEV_4232&SUBSYS_12018086&REV_00
and I can't get the Newer driver to install without errors stating it will not work with my ACer setup. But at least I got from v12.0.0.73 today to the one above. I reinstalled Itunes today hoping that would fix anything I'd removed and the version was like 10.3.x.x.x. Then I uninstalled from device manager & rebooted hoping wifi network adapter would start working again, but alas, no..
Hope someone can help me soon, cause I've run out of ideas.

DeployWebGate is not created after installing OHS webgate on Solaris sparc

Hi frends,
I am having trouble installing an OHS webgate 11.1.1.5 on Solaris sparc 64 bit. The install goes through OK and everything looks like it works however I don't have deployWebGate folder in webgate/ohs/tools/ so I can't do any configuration.
There are no errors in the install log !
Any help urgent.
Thanks

Hi,
Can you provide the name of the WebGate installation executable that you are running? Also, do you see a "deployWebgate" (lower case "g") directory under webgate/ohs/tools ?
Regards,
Colin

Install network card on solaris 8 x86 10/1

Hi
how can I install my netwoek card on solaris 8 x86
Thank a lot

In the same way you install any other card. Plug the card in
the slot., and install the appropriate solaris driver for that
network card. May be you want to detail the problem, if this
is not you are looking for.
Thx
Tushar Patel.

Error on Install on JRockit on Solaris SPARC, OS 5.8

ON attempting to install JRockit V5 Release 26.3.0 the JDK, 1.5.06 version for Solaris 64 bit SPARC I encounter the following error (in both console and silent mode)
Extracting 0%....................................................................................................100%
dl failure on line 748Error: failed /var/tmp/aaaIoaiCj/jre150_06/lib/sparcv9/jrockit/libjvm.so, because ld.so.1: java: fatal: relocation error: file /var/tmp/aaaIoaiCj/jre150_06/lib/sparcv9/jrockit/libjvm.so: symbol _walkcontext: referenced symbol not found
** Error during execution, error code = 1536.
Anyone encountered this. Or ideas as to what I can do to resolve it?

Looks like you are trying to install on Solaris 8 which isn't supported.
See: http://e-docs.bea.com/jrockit/jrdocs/suppPlat/supp_50.html and http://forums.bea.com/bea/thread.jspa?forumID=2009&threadID=600007913&messageID=600017076#600017076
Regards,
/Staffan

Installing network card in solaris 7 intel version

hai,
i installed solaris 7 in a intel platform. but the network card is not getting recoganised. the card is Compex Readlink RL2000 pci card. how i will configure it. please help me.
shibin

If the card is not recognized, then it's probably unsupported by solaris.
Either you can get a solaris 7 driver from the card's vendor, or you
get a new nic that is support under solaris 7.

Unable to install Network Adapter Driver for Windows Server 2012

Hi,
We have purchased a new computer for our office. And on that machine, we want to install Windows Server 2012 Standard with GUI.
Windows Server got installed on that machine. But we are unable to install drivers for our LAN card Intel® 82579V Gigabit Network Connection.
Please help us to get it working.
Thanks,
Ronak Shah

It is not working as the system is having Intel® 82579V Gigabit Network Card
I guess, it's not supported on windows server 2012
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3299&DwnldID=18725&ProductFamily=Ethernet+Components&ProductLine=Ethernet+Controllers&ProductProduct=Intel%C2%AE+82579+Gigabit+Ethernet+Controller&lang=eng
NOTE: The following devices do not have driver or software support for Windows Server
2008 R2:
- Intel® 82566MC Gigabit Network Connection
- Intel® 82566MM Gigabit Network Connection
- Intel® 82567LF Gigabit Network Connection
- Intel® 82567V Gigabit Network Connection
- Intel® 82577LC Gigabit Network Connection
- Intel® 82579V Gigabit Network Connection
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own.
This posting is provided AS IS with no warranties or guarantees and confers no rights.
Blog |
Wiki

Installing Network Adapter in Solaris (SPARC)

Similar Messages

Maybe you are looking for