Installing network card in solaris 7 intel version
hai,
i installed solaris 7 in a intel platform. but the network card is not getting recoganised. the card is Compex Readlink RL2000 pci card. how i will configure it. please help me.
shibin
If the card is not recognized, then it's probably unsupported by solaris.
Either you can get a solaris 7 driver from the card's vendor, or you
get a new nic that is support under solaris 7.
Similar Messages
-
Installing Oracle 8i in Solaris Intel Version With Pentium 4
Hi Guys,
I am trying to Install Oracle 8i under Solaris 8 Intel version with Pentium 4 processor fixed.But iam'nt able to continue after I click "Install" button,the runInstaller exited badly with no response.I was told that even Installing Oracle under Windows P4 is facing the same problem,but on searching I got solution by renaming a DDL file before starting installation.Is there any similar method to do for installing it under p4 processor on solaris intel 8 version.Dear Mr. Kumar, i am chandrasekaran from singapore, actualy i need your help regarding the intel sun os oracle. I have Intel Based SUN OS, but i try to get Oracle CD Any version either 8i or 9i for intel sun os.
One of my friend have the cd but it already damaged so that i need your help.
My address
S.Chandrasekaran, Blk 84 #07-93, Commonwealth close, Singapore 140084. If you have the cd you make one copy for me and send by post. Thank you
My email id: [email protected] or yahoo.com
by chandran.s -
Install network card on solaris 8 x86 10/1
Hi
how can I install my netwoek card on solaris 8 x86
Thank a lotIn the same way you install any other card. Plug the card in
the slot., and install the appropriate solaris driver for that
network card. May be you want to detail the problem, if this
is not you are looking for.
Thx
Tushar Patel. -
How to install lan card in solaris 11
Hi,
can some one please tell me how to install lan card in solaris nevada snv_55b X86, 5.11
When i do ifconfig -a it only displays loop back driver only
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
The other driver was missing can please some one tell me how to install that?Well, the lan card has to be one that is supported by Solaris and you need to have the proper driver installed before you'll be able to get it running. A good starting point would be to look at the Solaris Hardware Compatability List (HCL) at:
http://www.oracle.com/webfolder/technetwork/hcl/index.html
There is a blue box which says "Check out the X86 device list" which may be a good place to start. You won't be able to pick out Solaris version you're running for the OS type menu but if you can find the device anywhere you should at least be able to determine which driver it uses so you can check that against your system. If you don't have the driver package installed, you'll have to install it before you can see the device. If course, if the device isn't supported you're stuck. At least the HCL can help you select a new interface card which should work. -
How to install a network card on Solaris 10
Hi to all,
I have installed for the first time Solaris 10 on i386 system.
All went fine. Although Solaris did not found the PCI network card, is this normal?
How can I install the (Realtek) network card;
Thank you.
Costas.
Edited by: tritsako on Feb 9, 2009 11:33 AMThank you Zettabyte!!
Folks, network printers should NOT BE configured like this:
lpadmin -p somequeue -s someprinter
that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris. -
Dial up Connection using External Modem in Solaris Intel Version
Hi
How to Install a modem in Solaris 7 Intel version and how to make a Dial Up Connection Using this external Modem.
Can any one Help me....
send your reply to [email protected]
Thanks in Advance ....
Vinod.hello
i'm fond that inside the folder /etc you have another one called /ppp and inside the folder /ppp you have some files that you have to edit in orther to configure your user name and password, but everything is explained on that files, and is bether that you reed then
then in the console you have to type pppd ttya (if your modem is conected to the Com1) call myisp
were myisp is one of the files that you have to configure, but how i'm told you everyting is splained on that files
If you dont have it please install the 2 Cd
the only thing that i'm can't configure was diseble the "wait for dial tone" and in order of that i'm not able to conect to the internet, if you now someting aoubt that please send a e-mail to [email protected]
tanks -
I've just installed Solaris 10 8/7 on my x86 PC. but it doesn't auto recognize the Network Card from Silicon Integrated Systems (SiS 900 Ethernet Card). The card works fine and being auto detected in other os' like debian, fedora, xp. any solution ?
thanks a lot pat, it helps the card is up running. thanks again
-
Boot Camp Windows 8.1 Installation Did Not Install Network Card
I just installed a Windows 8.1 Boot Camp partition on a new Mid 2013 MBA. The install ran the support software and installed the drivers. However I don't show any network cards in my Windows 8.1 installation. I reran the support sw manually and it went through and supposedly fixed any driver errors but I still don't see a network card or have a network connection. It works just fine in my OSX partition, so it is definately a driver issue. *** do I need to do to get the network driver installed?
In Thehatters defence, this was initially posted in the MacbookPro forum and then moved to Boot Camp,
If you have any joy solving your trackpad device driver issue, feel free to post here (there might be a similar fix for my wireless adapter device)
Thanks -
Network cards for Solaris 8 x86
Which network cards are supported by Solaris 8 x86 ?
Thank you !
dorin.Are you considering any particular cards ?
I have had good luck with DEC21040 (10baseT) and DEC21140 (100baseT) cards
in Solaris 7 through Solaris 10 on x86.
The same can be said for 3Com 3C905C-TX cards.
Solaris 8x86 will recognize many chipsets natively,
and a number of third party developers have created working driver packages.
Most of their driver packages are free, but a few are not free.
Solaris 9 works with a few more, and Solaris 10 works with yet more adapters.
The Solaris 8x86 HCL list has the native cards.
This other Sun web page can direct you toward 3rd party sites. -
What 100MB Network Cards will Solaris 2.5.1 auto-detect
I need a PCI network card that Sow-lrais 2.5.1 will recognize. It must be 100baseT. The ones it enumerates at install time are aincient -- SMC/Western Digital, etc. Any modern cards that will work?
Please help me move on -- I've wasted days digging for old cards and trying them.
Thanks
Danielelxl comes from the elxl driver. I am afraid that you probably can't just change this behavior. Why would your vendor do such a thing though? To me that seems incredibly stupid.
-
Installing Network Adapter in Solaris (SPARC)
As I understand, HCL is only for x86 Solaris.
And what about analog for SPARC?
Actually, which Models of PCI Network Adapters can I install into my SPARC, and Solaris will support it?Hello Vassiliy,
please don't double post !
Please read my answer to your enquiry
There is no elxl driver in /dev directory...
http://forum.sun.com/thread.jspa?threadID=21382
The supported Sun Hardware is listed in the Sun System Handbook / Full Components List of your system, for example Blade 2500
http://sunsolve.sun.com/handbook_pub/Systems/SunBlade2500/components.html
Actually, which Models of PCI Network Adapters can I install into my SPARC, and Solaris will support it?
Information about 3rd-party Hardware can be found on the following page
Third Party I/O Solutions
http://www.sun.com/io_technologies/ihvindex.html
Michael -
Installing a second Network Card
Having just installed Solaris 8 on an Intel based machine, the system is identifying two installed network cards.
Can anyone tell me how to configure the second Network Card - IP address etc as the Web Start package will only allow configuration of the first network cardYou just need to create a new text file /etc/hostname.{nic-interface-name}
Lets assume the system has two intel etherexpress pro NICs installed. The intel NIC's driver
name / interface name is "iprb". So the two NICs are named "iprb0" and "iprb1".
The file /etc/hostname.iprb0 should already exist (created by the inital installation).
Just create /etc/hostname.iprb1 and put into this file the ip-address of the iprb1 interface.
You can also use a hostname in that file and add a hostname -> ip address mapping
into the /etc/hosts file.
During the next reboot the system will automatically bring up both the iprb0 and iprb1
interface. -
Can you install 9i on Solaris Intel ?
Can you install Oracle 9i on Solaris Intel ? 32 / 64 bit
Hello dear people,
I'm trying to install the 9i Database for Sun SPARC (32-bit) on an Intel machine with Solaris 8 running. I followed all steps of the installation documentation, but when I try to execute the runInstaller programm, I get always the following error:
Syntax error at row 1: '(' unexpected.
Can you tell me, which is actually the terminal Release for Intel Solaris? I were very pleased.
Thanks,
Reinaldo -
Network Card Installation problem
Hi All,
I have HCL LX INIFINITY POWERLITE 6010 G1 laptop which Marvel Yukon 88E8053 PCI-E Gigabit Ethernet Controller . I tried lot of time to install the driver of it on Sun Solaris but I am not able to install it. I have done add_drv -i and give device id and vendor id . Still gives error softwares is partially install but not able to connect hardware. This lan driver is installed on Windows and Linux . Can anybody help me to sort out my problem or some pkg to download .
Thanks in advance.I don't think your network card is Solaris compatible. A good stable choice is 3C905 by 3Com and Intel eepro100.
2) I have got a no name brand network card with
Realtek RTL8029 chip. At the begining of the
installation, the hardware detection software does
detect the card and assign resources to it. Later on
during the installation, the program ask me what IP
address to assign to the system, so I enter an IP
address. AS soon as, I click OK. I got a messange
like the IP address can not be assigned to the network
card. Does this mean my network card is not
compatible?Chetan Bhargava
ASA Computers inc. -
Is Oracle Solaris Intel available as a developer download?
Is Solaris Intel version available to developers?
Thanks, Stan, for the answer and links.
I am supremely disappointed that Adobe is abandoning Encore far too soon. We, your PAYING customers still depend upon DVDs and BlueRays as the tangible deliverable to our paying customers.
I followed the directions for installing Premiere Pro CS6, and with some hiccups, finally got it to work. Unfortunately, I cannot figure out how to UNinstall. There is no Uninstaller inside the Premiere Pro folder (nore any of the CS6 aps). I'm on Windows 7 Pro, and there is no longer an Add/Remove Programs control panel. Can you tell me how I am supposed to uninstall?
Maybe you are looking for
-
In Material master safety stock field is in display
Hi, As a consultant i am able to change the Safety stock field in MRP view in the test system and Production also,but for the user this particular field is in display mode wheras other field in the MRP view user is able to change. Kindly help me if,t
-
J2re 1.4.2_12 permissions issue?
Our users do not have admin rights. I installed 1.4.2_12 as local administrator. When we bring up our webpage, java is not detected under a regular user. Login as an administrator and it detect just fine. All other versions do not have this problem.
-
Trying to add data to phone with money already on my accout how do i do it
trying to add data to my phone with money already on my account how do i do it
-
I am trying to view fabric.com. I initially viewed the site fine, then I connected to a wifi network with bad service and none of the photos showed up on that site and others. Now whenever I view the site, the pictures don't come up. I tried clearing
-
I want to upgrade from 10.6.8 to 10.9.
Is it possible to go from OS X 10.6.8 straight to OS X 10.9.5? 10.9.5 is the only version currently available at the App Store. I believe. I would prefer to upgrade to 10.9 but if 10.9.5 is the only version of Mavericks available I will do it. I have