Installing new hard drive in Mac Pro - question about compatibility.

I'm looking to install an extra internal hard drive in my 2009 Mac Pro, but I need to know if there are any compatibility issues with newer hard drives. I am looking at the Western Digital WD1002FAEX Caviar Black:
http://www.amazon.co.uk/gp/product/B0036Q7MV0/ref=s9_simh_gw_p147_d0_g147_i1?pf_ rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-2&pf_rd_r=1HY9SF4S3JFEA79TK610&pf_rd_t=101&pf _rd_p=467128533&pf_rd_i=468294
Would anyone be able to tell me if this is likely to be compatible with my 2009 8 core Mac Pro? Or if there is anything I should be looking out for in particular? I know pre-installed hard drives are 3GB/s and the above hard drive is 6GB/s, does this matter?

Any SATA drive
About urls:
http://www.amazon.co.uk/gp/product/B0036Q7MV0/
is all that is needed.
For a bit more, WD1502FAEX WD Black 1.5TB
http://www.wdc.com/en/products/internal/enterprise/

Similar Messages

  • Just installed new hard drive in mac book pro 15", when trying to boot OSX from original disk I still get a folder with a question mark in it. How can I reinstall the OS?

    Can't seem to get my mac book to boot from the CD after installing new hard drive.
    I keep holding down "c" while restarting the machine with the disk in but it just keeps ejecting the disk and giving me a folder with a question mark.

    If your on 10.5 with a Intel Mac, I think Apple has jinxed the firmware so you can't boot from the 10.5 disk anymore.
    So far several people, myself included, can't boot from a 10.5 OS X disk on a Intel Mac.
    Your going to have to buy a 10.6.3 Snow Leopard retail disk, it's wayyy better than 10.5 anyway, faster and most stable even better than Lion. Have to buy iLife though as it doesn't come on the 10.6.3 retail disks, only free with grey disks.
    http://store.apple.com/us/product/MC573Z/A
    https://discussions.apple.com/message/16276201#16276201

  • Cant install mountain lion on a new hard drive 2011 mac pro 17"

    for some reason I bought the infamous 2011 mac pro, and the hard drive kept having IN/OUT problems and after it destroyed half day of work, I decided to get a new hard drive, *blue WD 500g" but i have tried EVERYTHING and i just cant install mountain lion on it.
    1.- i tried forcing the recovery mode so It would connect to the internet and download mountain lion but after 10 min or so i trows the -2002f error at me
    2.- I tried to use the old hard drive that i put on a external hard drive reader so I could get the recovery partition but i just keep restarting the installation no reason given
    3.- downloaded the mountain lion and tried to installing it on the system hard drive of the laptop trough a computer running snow leopard but dosn't let me.
    4.- tried the same thing on target mode without success
    5.- using the recovery partition I used disk utility to se of the partition was locked but it was not
    6.- created a different partition to see if it would install it  there didn't work.
    i just don't understand why
    any toughs?
    if you answer this you would be a personal hero of mine
    cheers

    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Use DiskMaker X to put your installer clone onto the USB flash drive.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
         sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
         /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time.

  • Hard Drive for Mac Pro Questions

    Hi, I have 2, 600GB hard drives (Approximately) in my Mac Pro. 1 is for Windows Vista, the other is for Leopard. I'm running low on storage space on the Mac Side. I customized my Mac Pro when I bought it off the Apple Site.
    I would like to add another hard drive to my Mac so I have more storage space, 600 GB would be a good size. Would this Hard Drive work? http://store.apple.com/us/product/MB983ZM/A.
    I've never installed a hard drive in a computer before. Is it safe to do? is it difficult? My only fear is somehow messing up my mac.
    I would like the new hard drive to only be used on my Mac Side running Leopard (not Windows Vista). how would I do this?
    Any info is greatly appreciated. Thanks

    Thanks guys. I have a couple more questions, I'll be purchasing a 1TB Hard Drive. Why are the hard drives much more expensive from the Apple Store than from Amazon? Is it safer to pay more money and buy the hard drive from the Apple Store than from Amazon?
    After I install the Hard Drive will I see a New Hard Drive Icon on my Desktop?
    How do I tell the computer that the new Hard drive will be used only on the mac side and not the Windows side?
    When I go into Disk Utility to format how will I know which is the new hard drive? I don't want to accidentally format my current hard drive will all my data on it.
    How will I store data on the new hard drive?
    Any info is greatly appreciated.

  • Install new hard drive into MacBook Pro?

    I have a MacBook Pro from early 2008 and I've just run out of space on the 200GB hard drive which came with the computer.
    I've read in a few forums that a 1TB hard drive WILL fit in this computer, and in some other forums I've heard that it won't, because it's too big. A terabyte would be ideal as I'm a media student and use this computer for literally everything.
    However, if the Terabyte won't work, I'd be happy to live with the 750GB version of it. I'm looking at the Western Digital Scorpio Blue ones at the moment.
    Now, my question is this; Will my computer be able to handle the new hard drive? Or should I just buy a 1TB external, run everything off that, and just upgrade the RAM?
    I'd also look at getting a cooler mat for my computer if that would help.
    Any help would be greatly appreciated.

    Refer your guy to this:
    http://eshop.macsales.com/item/Western%20Digital/WD10TPVT/
    "Description: 1.0TB WD Scorpio Blue 5200RPM SATA 12.5mm HD with Advanced Format Technology - Fits all Apple MacBook/MacBook Pro 'Unibody' Models (13/15/17"), *MacBook Pro 'pre-unibody' 17",* and PC Laptops which support 12.5mm SATA Drives. New with 3yr WD Warranty. (WDGWD10TPVT)"
    OWC is one of the most reliable online vendors of Mac-related stuff. You can believe that description.
    The confusion arises from the fact that Apple says the height limit for drives in all MBPs is 9.5mm. Obviously Apple doesn't support the use of thicker drives in them, but in fact they do fit and work in some models, as the quote above describes.

  • How to install new hard drive on Macbook Pro

    My hard drive failed and I am no longer able to boot up the Macbook. If I go and buy a new hard drive and replace it with the broken one, what will happen when I turn it on. It will be a brand new drive with nothing on it. Will it automatically start installing OS X on it or do I need anything else?
    Thanks!

    It'll display a blinking question mark and/or automatically start from Apple's servers. What needs to be done depends on the computer's model.
    If it originally shipped with 10.6.8 or earlier, insert a compatible install DVD and press the C key.
    If it originally shipped with 10.7 or newer or was upgraded to use Apple's Internet Recovery system, press the Option, Command, and R keys if needed.
    Install the OS.
    (125849)

  • Installing new hard drive on MacBook Pro...

    I had a friend install a new hard drive on my Mac since mine was clicking and going to break. But now I insert the start up disc and hold c upon start up, and then the screen stays gray. I know the hard drive was installed correctly but the disc won't work?
    Thanks for any help,
    Linda

    Is it a retail purchased disc or was it a drop-in with the MBP? If the former it should work if it has a version later than the one installed on the computer originally. If the latter, then you cannot use it. You can use the original disc that came with your MBP or you can use a bootable backup of the MBP. The latter would be great because you could simply erase the MBP's drive and restore the clone.

  • Installed New Hard Drive in Mac Book

    Please help.
    I installed a new Hard Drive in my Mac Book as my old one is bad. I am trying to install Leopard. I have reached the screen to select a destination and there is nothing I can pick from in the window.
    Can someone help with the next step, please.

    Hi Sumo,
    Have you already formatted your new hard drive using Disk Utility? Be sure to format as Mac OS Extended as you'll be fine. That may be why you're not able to pick a drive to install Leopard.
    After formatting the drive then you should be able to progress to installing Leopard onto the drive. From there just follow the directions.
    Good luck.

  • Installed new Hard drive, but Mac OS X won't install

    Hi, I posted earlier about installing a new hard drive in my G3 iBook, and well, I did that! After the installation, I put in the Mac OS X CD and opened up the disk utility from the CD, and sure enough the new hard drive was there. So I clicked on the hard drive icon, then clicked erase, and selected Mac OS X extended (journaled). After this was complete, I attempted to install the Mac OS, but it told me that it could not install Mac OS X on this drive! please help me.

    Alas, I too have expirienced the same problem, and I have all your answers. Yes, DO use www.ifixit.com, the instalation looks difficult, bot is quite easy. Check eBay for some HDs, I got a brand new 40 gig one for $70. I had a problem installing the OS with the new one, so if it happens to you try this:
    1. Make sure you have the system restore disks.
    ( your restore disk (there are 4 of them,) shoud restore to mac OS 9 and you probably have a seprate X disk(s))
    2. Insert the OS X disk and boot up (manualy insert disk(paper clip))
    3. At the top there should be some buttons like the apple logo, file, etc.
    under one of the menues there is a button either labled Services or disk utility
    4. Select the erase disk tab.
    5. erase your (empty!) HD.
    6. shut down
    7. manualy insert restore disk 1
    8. Boot up holding down the C key, and run system restore
    9. when that is done, boot up as OS 9
    10. Insert the Mac OS X disk
    10. restart whyle holding down the C key
    11. install X.
    hope it works!

  • New hard drive and have a question about photo stream.

    My hard drive recently crashed.  I have a new hard drive and am trying to organize my iphoto again.  There are 1,000 photos on my iphone (photo stream) how do I get these onto my mac?  My mac only has the last 30 days.  Do I have to save each individual photos to the camera roll?

    G9daniel wrote:
    Is there a way to get user settings returned to what they were before?
    Not unless you have a Time Machine backup of your system.
    If you kdo you can just boot from the SL install disc and use that yo restore your system to the new HDD.

  • New hard drive in Mac Pro showing 0 bytes after partitioning

    I bought a Western Digital Caviar 2TB internal hard drive for my Mac Pro (2 x 2.66 GHz Dual Core Intel Xeon (late 2006), 12GB RAM, Mac OS 10.6.8). It already has two 500GB internal drives in two of the four slots.
    I slotted the new WD hard drive in and started up the Mac, getting an alert saying there was an unrecognisable disk and did I want to initialise it? Yes, so it opened up Disk Utility.
    This showed my two 500GB drives plus the new WD drive at 2TB. To initialise it I erased the disk which failed with an error ("POSIX reports: The operation
    couldn't be completed. Input/output error").
    I next decided to use Partition instead, choosing just one partition of 2TB, Mac OS Extended (Journaled). After 7 minutes it said the process had been completed and the volume was mounted, though it didn't appear on my desktop, just in Disk Utility. I thought a restart would refresh and show it on the desktop.
    Once the Mac was up and running again there was nothing there at all - and now it wasn't even listed in Disk Utility. I shut down, took the hard drive out,
    looked at it, scratched my head, replaced it, and turned the Mac back on.
    Once again I got an alert telling me the disk was uninitialised and would I like to format it, so clicked OK and Disk Utility opened. This time the disk was
    there (WDC WD20EZRX-00DC0B0) but no volume. The info said the drive had a size of 0 Bytes and I could not erase or partition as all buttons were greyed out,
    with the Partition tab saying 'this disk is too small to contain partitions'.
    So what can I do now? According to macupgrades.co.uk this drive should work in my model of Mac (they recommend and sell it, though I purchased it from NORDPC via Amazon as it was a little cheaper).
    http://www.macupgrades.co.uk/store/product_info.php?products_id=532
    I tried, with the help of my more computer-literate brother, to erase the disk from the command line via the Terminal, getting a result of "Error: 6: POSIX
    reports: Device not configured". (Actually we first tried to reformat it, with an error of "does not appear to have a valid file system format").
    Does anyone with more knowledge of such things have any ideas or advice? It would be much appreciated.

    Unless the drive and sled are not inserted properly - unlikely - or that other drives don't work in that slot - watch out if true, unlikely but loose SATA cable - it IS a bad drive.
    If you don't have a PC, setup Windows VM and use WD Lifeguard which is excellent and tests for things like bad SATA cable communicating.
    You could also - I always use Partition tab btw - go in there and set it to exFAT and Windows Master Boot Record. All you want is a good drive. This one is not.
    GUID tests first and last 10,000 sectors or more to insure that the partition tables and hidden areas work (they are not it is failing). Use to be that a "backup volume information block" was treated as optional if any sectors failed, now it is not.

  • Install new hard drive in MacBook Pro

    Hello,
    I recently installed a Seagate Momentus XT 500 GB internal hard drive into my MacBook Pro and I can't get past the startup screen. It shows a picture that seems to be wanting me to slide a tab on the upper right hand corner into the "up" position. I would post a picture of it but I'm not sure how. I thought it might be a read/write tab on the drive itself but when I took it out to look, no such tab. Anyone run into this problem? Thanks!

    Mathias Kohring wrote:
    Yup, seems like it's hit or miss with that drive. I'm looking into returning it. Is there any way to post a picture of the screen I'm getting? I'd love to know what it means...thanks
    Yes.
    Place the photo on your desktop.  In the replay window (your post) click on the "camera" icon and follow the directions.

  • Adding new hard drive to Mac Pro (quad core)

    I've just ordered a new Mac Pro quad core (2.66 GHz) with one GB HD. Since Apple is charging £240 for a second drive I decided to get it from somewhere else. I found a 1GB Western Digital Caviar Green but I also noticed 1GB WD Caviar Black. I wonder if anybody has any experience of those drives and would they work with the latest Mac Pro ?
    Does anybody knows what make of drive is Apple using in their latest Mac Pros ?
    Tom

    *WD Caviar Black 640GB*
    HD Tune: WDC WD6401AALS-00L3B2 Benchmark
    Transfer Rate Minimum : 59.1 MB/sec
    Transfer Rate Maximum : 118.1 MB/sec
    Transfer Rate Average : 96.4 MB/sec
    Access Time : 11.8 ms
    Burst Rate : 125.3 MB/sec
    *Black Caviar 1TB:*
    HD Tune: WDC WD1001FALS-00J7B Benchmark
    Transfer Rate Minimum : 53.9 MB/sec
    Transfer Rate Maximum : 108.7 MB/sec
    Transfer Rate Average : 86.1 MB/sec
    Access Time : 12.9 ms
    Burst Rate : 111.5 MB/sec
    +(note the slower average to the smaller 640GB model)+
    *Green Power 1TB*
    HD Tune: WDC WD10EADS-00L5B1 Benchmark
    12-23-2008
    Transfer Rate Minimum : 41.6 MB/sec
    Transfer Rate Maximum : 95.6 MB/sec
    Transfer Rate Average : 74.3 MB/sec
    Access Time : 14.0 ms
    Burst Rate : 117.2 MB/sec
    *WD Caviar Blue 640GB*
    HD Tune: WDC WD6400AAKS-00A7B Benchmark
    Transfer Rate Minimum : 55.6 MB/sec
    Transfer Rate Maximum : 113.3 MB/sec
    Transfer Rate Average : 90.2 MB/sec
    Access Time : 11.8 ms
    Burst Rate : 112.9 MB/sec
    the 32MB cache did not make a real or noticeable difference in benchmarks
    http://www.barefeats.com/hard112.html

  • Installing new dvd drive in Mac Pro 3,1

    I've had just about enough of this old optiarc dvd burner. I've tried to burn 3 verbatim SL dvd-R last night, and I got the message about couldn't calibrate laser power for this device. I have tried to burn at 2x, 4x, 6x, 8x with no success. I used to be able to burn discs sucessfully, but not anymore. I know this is an ATAPI drive aka P-ATA, and drives of this kind aren't exactly easy to find. I was told that there is a S-Ata port or two in my Mac pro, but that it's a real pain in the tush to get at and connect a cable to.. So, any help welcomed
    OS 10.6.8, 6 gigs ram, Nvidia 8800 GT video card, if that helps
    thanks
    John B

    couldn't calibrate laser power for this device.
    That message is code for, "you are using the wrong discs for this drive". There appear to be several series that use different speeds, and they are NOT compatible. I expect you are using discs that are too "modern" for your older burner, such as 8x discs in a 2.5x burner.
    That error message is unbelievably un-helpful and obscure.

  • Need help with installing new hard drive in Satellite Pro M10

    Hi All,
    My hard disk died in my Satellite Pro M10 so I decided to fit another.
    It fits fine in the caddy but just doesnt want to slot into place correctly as something seems to be stopping it.
    Does the M10 only accept a certain make/model?
    Also does anyone know what the highest capacity the M10 will accept?
    Many thanks.
    Regards
    J

    As far as I know there should not be problem at all. Take old and new HDD and compare the connectors. I hope they are the same. I can just imagine the new HD is not placed properly in the HDD bracket. Be sure the new one is placed as old one after removing it from the notebook.
    About max HDD capacity there is no precise info and we can just speculate about it. Try to use search option on this forum. Maybe someone already wrote about HDD upgrade on Sat/Sat Pro M10.
    The fact is that Satellite Pro is delivered with 30, 40 and 60 GB HDDs. How many GB has your new HDD?

Maybe you are looking for