Installing new hard drive / moving data / what do i need to know?

Hello,
I am going to installing a new hard drive to replace my almost full 650 gig drive I am currently using.
What do I need to know when installing the new drive and copying all my data from my old drive to the new drive?
Do I have to keep the volumes names the same? (my internal structure will not change)
I want to make sure i dont screw anything up

I have a similar problem. I want to move photos and catalog off C:/drive to an external E: drive. Running Windows XP. I have relocated the photographs, all31,000 of them, What do I do about a catalog? What I want to do is create a new one, but every time I try, it goes back to the C: drive.

Similar Messages

Bookmarks in version older than 8 - installed new hard drive - where is the bookmarks file?

installed new hard drive two months ago - just now reinstalling Firefox -- installed new version 8 -- need to know where my old bookmarks would be stored (what file and where)

Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
* here explain how to backup profile https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
* here explain how to restore it
https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this a factor?

Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?

Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.

HT4718 Installed new hard drive, click on restore from time machine, get to 'select a destination' but just keeps searching for disks.. any help please?

Installed new hard drive and want to restore from time machine.
Get as far as 'select a destination' then it goes no further - just keeps 'searching for disks'
Help anyone please?

1. Be sure your drive is attached and mounted.
2. If you have already written any data to the drive, back it up before proceeding to the next step.
3. In the Finder, choose Go > Utilities. The /Applications/Utilities folder will open.
4. Launch Disk Utility.
5. Click the icon for your external hard drive in the sidebar on the left.
6. Click the Erase tab along the top of the window.
7. From the Volume Format menu, choose Mac OS Extended (Journaled).
8. Enter a name for the external hard drive in the Name field.
9. Click the Erase button.
Make Sure that you choose the correct drive

Can I get my bookmarks back after installing new hard drive?

Can I get my bookmarks back after installing new hard drive?

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

Just installed new hard drive in mac book pro 15", when trying to boot OSX from original disk I still get a folder with a question mark in it. How can I reinstall the OS?

Can't seem to get my mac book to boot from the CD after installing new hard drive.
I keep holding down "c" while restarting the machine with the disk in but it just keeps ejecting the disk and giving me a folder with a question mark.

If your on 10.5 with a Intel Mac, I think Apple has jinxed the firmware so you can't boot from the 10.5 disk anymore.
So far several people, myself included, can't boot from a 10.5 OS X disk on a Intel Mac.
Your going to have to buy a 10.6.3 Snow Leopard retail disk, it's wayyy better than 10.5 anyway, faster and most stable even better than Lion. Have to buy iLife though as it doesn't come on the 10.6.3 retail disks, only free with grey disks.
http://store.apple.com/us/product/MC573Z/A
https://discussions.apple.com/message/16276201#16276201

Hard drive on my mac died, installed new hard drive. When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?

hard drive on my mac died, installed new hard drive. When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?

Yes because that information is not located on the hard-drive of your new mac! If it is purchased content from the store, than this issue isn't as bad as it looks!
Here is a link explaining how to get your previously purchased content back:
http://support.apple.com/kb/HT2519
You also want to authorize your Apple ID account on the computer by following these instructions as well:
http://support.apple.com/kb/PH1730
Basically this link explains to go to the top left corner of your screen where you will see file, edit, view etc! Click on Store in that section and click on authorize this computer, also you want to make sure that the computer will not automatically sync by going to iTunes in the top left corner, just to the right of the apple symbol if iTunes is selected, and go to prefrences, and here you will see back up! Right under the back-ups has an option explaining to prevent devices from automatically syncing which is good cause you may be able to transfer your purchases from there which will put your content into the computer, and if that happens than we don't lose anything
Hopefully I was of some help:)

I install new hard drive 500gb and i still have 400gb available but my macbook run very slow getting rainbow all the time on screen

i have install new hard drive 500gb and i still have 400gb available but my macbook run very slow getting rainbow all the time on screen.
need help

First boot into recovery and select Disk Utility>First Aid and repair the disk.
If there is no improvement, perform a Safe Boot:
http://support.apple.com/kb/ht1
If there is an improvement, then third party applications are probably the cause of the problem.
Ciao.

Installed new hard drive in a Toshiba satellite and now cant do windows upadates

installed new hard drive in a Toshiba satellite S500-02J . Used recovery stick purchased from Toshiba. Windows installed and everything up and running, but when I go to do a windows update. I received this message: "Windows update cannot currently check for updates, because the service is not running. You may need to restart your computer."
Toshiba help line said it was a problem because new hard drive was not exactly the same as the old hard drive. It was a minor fix but wanted a $100 to perform the fix remotely.
Any ideas on how to fix this problem?
Thanks.

satellite S500-02J
Maybe this one from the land down under?
Satellite A500/02J (PSAR9A-02J001)
The probloem occurs because the new drive has advanced-format technology. All the new ones do. See this message from three years ago.
The fix is to install a new storage driver.
Intel Rapid Storage Technology
If you've messed around with drivers, you'll probably need to repeat the restore. Introduce the storage driver as early as possible.
-Jerry

Help with installing new hard drive and transferring data?

I have a MacBook Pro 13-inch mid 2009 that is running OS X version 10.6.8. The hard drive is full and I have a new one I'd like to install, but I am awfly intimidated. I'm hoping that someone could shed some light on kindergarten-style step-by-step instructions on how to make the switch. I'm mostly concerned about the data transfer part. I've found a handy video about physically installing the drive, so I think I'll be ok there.
Here are the items I have in preperation for the switch:
• 1.0 TB Hitachi Travelstar 7200RPM Hard Drive
• Portable bus-powered USB 3.0 storage solution (to turn my old hard drive into an external hard drive)
• Tools including a small phillips screwdriver and some Torx Screwdrivers
• Time Machine Extermal Hard Drive with all of my backups
Here are some things I have read that I find to be confusing
• Some suggest I should transfer my data from the old hard drive to new new one BEFORE I install the new one. (I'm not sure how that works.)
• Some suggest upgrading to the latest OS X before transferring any data. (Would that be Mavericks? I haven't upgraded to that yet. Is that necissary?)
• Some suggest that I will need the MacBook Pro's installation disk to make the switch. (I don't know where that disk is. Do I really need it?)
If anyone can clarify any of the above issues that I've listed as confusing, that would be great. Also, if anyone can help me figure out what steps to do first, second, third, etc., that would be great.
Thanks!

Also,
Will I need the install disks for the Adobe Creative Suite and Microsoft office when I put in the new hard drive?

Playlists Missing After Install New Hard Drive and Upgrade to Win 7

My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
(I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
("My Administrative Account"): Users / Owner / My Music
and
("My User Account"): Users / Yank / My Music
My "Administrative" and "User" user accounts contain different songs in iTunes.
If helpful, I could describe what is in each of these 2 backed-up music folders.
To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
When I open my iTunes, I have no playlists.
However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
Thank you.

YAY!
I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
Four files with that name were found, with different dates.
I chose the most recent, dated just a few days before I made my backup to the external hard drive.
I copied it to my computer's hard drive into the following location:
C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
which overwrote the file which was located there.
When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
THANK YOU AGAIN SO MUCH!

Help with new hard drive and data recovery

I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got tekserv to recover my data and get a new hard drive and update to 8GB of Ram. When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive. I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop. Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
2. my iTunes library is now there but none of my playlists are there. Should those have been saved somewhere in my iTunes folder that I should see them? I'm concerned about syncing my iPhone or iPads to iTunes without those there.
thanks for the help.

Here's the spec page on your PB. http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
 Cheers, Tom

Just installed new hard drive yet it's not picking it up.

A few days ago I couldn't figure out why my MacBook wouldn't get past the white start up screen. I found that it was caused because my hard drive was dead. I went out and picked up a new hard drive. I just installed it. No problems getting it installed. But I've put in my os cd to install it on my new hard drive. It starts up, goes to the walkthough for installation, yet again it won't recognize that I've installed a new drive. It's just like before and not finding it. What could be causing this??

Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When the formatting is completed quit DU to return to the installer. You may now install OS X.

Can't install OSX after I installed new hard drive

Okay so my 2009 MacBook pro would not start up, took it to the genius bar and they said I need a new hard drive. I installed a Western Digital blue Scorpio one from Best Buy and now when I turn on the computer I just get a flashing folder with a question mark. I've tried holding down c or option when rebooting, and rebooting with and without the OSX install DVD. I'm never given any options and it either starts up to a blank screen or to the question mark. What am I doing wrong?

You need to prep the drive first:
Drive Preparation and Installation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Quit DU after formatting and return to the installer. Install Snow Leopard.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.

Installing new hard drive / moving data / what do i need to know?

Similar Messages

Maybe you are looking for