Installing new IOS7 and prompt for passcode when I have not set one up for my iphone
Have installed iOS7 on my iphone 4S and when it has restarted it has asked me to enter my passcode, when I had not previously entered one and now phone is locked and I am unable to use the device. Is their a default passcode that I have to enter before selecting one of own?
Please advise.
Try and force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost.
Similar Messages
-
i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???
capriz wrote:
i have just updated my old 3GS ...
To what... iOS 7 is Not supported on the 3 GS -
Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
i have updated my ipad and now it has a passcode that i have not set up so i do not not have the passcode to put in and now it is disababled! HELP!
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
My ipad is asking for a passcode yet i have never set one
Has anyone got any idea if there's a default passcode as I have never set one myself. I have tried many simple codes i.e. 1234 but nothing seems to work
I have just done the iOS 7 update to my disabled son's iPad, which he uses every day for therapies, and now its suddenly asking for a passcode too! After update had finished there was jut suddenly this keypad on the screen asking for passcode, and I have never had or set one before!
Madame as you I tried generic ones, 0000, 1234 etc and all I managed to do was get the iPad disabled from entering too many wrong codes!
Ridiculous that this update sets a passcode lock yet doesn't inform you in any way of what it is!
I have been locked out for days now and I don't know how to get in!
Now apple have release iOS 7.0.2 as a "bug fix" which excited me when I initially saw it this morning but turns out their idea of a big fix for this passcode problem is to create a fix that stops people being able to bypass the passcode!!
God I wish I COULD bypass the thing, but I can't and yet that's what apple decides to do a big fix for, not the fact that I and from what I can see online, many others, have been locked out of our own devices since doing their stupid iOS 7 update!!
Links that are for forgotten passcodes are no help at all as they are for people who have had one and forgotten it, when you plug your device into iTunes, if you've ever created a passcode, there is a button you can see to "change passcode" but for me this is grayed out because I have never created one!
If anyone has solved this problem above, although not exactly the same as mine, pleas please reply and help!
Or if you've seen talk and fixes about this same issue with iOS 7 update please let me know? My son really needs his iPad! I'm also too scared now to update my iPhone in case same thing happens and I'm left without a phone!
Samara -
I got locked out from my iPad mini during my initial setup. Keep ask me for passcode but I haven't setup one. Reboot and restart didn't solve the problem, tried connect to iTunes but it won't let me because it requires the passcode. Tried my Exchanged password, Apple ID password and my iPhone passcode but none work. Any idea to resolve this?
Try and force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. -
hi,
I want conferencing, mobility, remote access, etc., to be automatically set to a defined policy so when I create a user, I don't have to go down the list to change the default from automatic to my custom policy. I don't want to edit the global
polices.
thanks,
rudifAgree with Georg, you can do that using Powershell
To assign policy using Powershell, you can refer below link
http://blogs.technet.com/b/csps/archive/2010/06/06/refpolicies.aspx
https://blogs.technet.com/b/csps/archive/2011/07/13/agmanagingusers.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer" -
Hi,
I want to understand the licensing structure of Microsoft windows 2008 server standard edition.
If i buy a Microsoft windows 2008 server standard edition license ,can i activate the IIS in that without any extra cost involved ?
Can i use this license on commercial purpose for my website deployment ?
How much it will cost for me ?
Regards,
DeepakHello,
if you want using the IIS role on the Windows Server for your Website you Need only the Server License without to purchase the CALs or External Connector.
thanks
diramoh -
Strange Keyline around image when I have not applied one
After importing an image into a box with no keyline around it (transparent not white), I export to PDF and find it displays a light grey keyline around the image where the box outline would be. Why? How can I avoid this ? Iam running InDesign CC
Similarly, I'm getting another transparency artifact in CS6. I'm placing a psd with a layer mask. I don't get a line, I get a ghost box representing the original image frame. It's an old PS problem, but I haven't had either the line or ghost box in years. It's back!
The transparency should be complete (black masked area in Pshop) and it looks fine on screenin ID. However, it prints with a faintly lighter box (just a few percent) to a Xerox 3250 with PS Level3. I've tried setting Transparency Preset to High Res and set the print dialog for Output: Simulate Overprint, Graphics: Send All Data, and Advanced: High Res. Still get the ghost.
Dropouts made with clipping paths don't have this problem. -
Just got a notification that a new email acct was accessing FaceTime when we were not. Thoughts?
We were trying to download Pinterest App on a phone, IOS was outdated so after entering Apple ID we were unable. A couple minutes later, got a notification that a new email address was accessing FaceTime when we were not.
Change the password for your Apple ID/iCloud ID.
Did the message say what email address was used?
Contact iTunes
Apple - Support - iTunes - Contact Us -
Constantly get beach ball when I have more than one program open
I am get a slow machine and beach ball going when I have been using the computer for a while with a couple of programs open. I have 4MB of Ram and running 10.8.5.
Any ideas at what to look at first?
ThanksWhen you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
now that I just re-newed my photoshop photography ....I have not been using that for some reason I have been using something else. they had changed me a couple
of times last year from one thing to another ...so I never go photoshop photography downloaded. I used the other one very little because I wasn't sure I should...gee
I hope that makes sense.
I need to download photoshop photography.
Sherri nicholasYou need to get the owner's manual for your Ford's bluetooth system to see how to put your system into discovery mode for the iPhone as well as the appropriate steps to take.
In addition, you should see if the iPhone is supported. -
I wish to reset my ipad (as advised by the Apple Store) to attempt to resolve an issue with a non-responsive part of the screen.. However, when I select General>Reset>Erase all content and Settings, I am prompted for a a Restrictions Passcode (which I have never set). I have now entered random codes 11 times and the ipad has not reset. How do I get past this? I am now at the point where I have to wait 60 mins before I can enter another random passcode. I just want the ipad to clear down, erase everything so I can start again.
The other option is to force iPad into Recovery Mode.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad -
how can I check my passcode I updated today and when I am going to reset all content and setting my iPhone 4S they asked me for passcode when I entered the passcode the one I just update too is doesn't want to accept it
I have had the same problem with iPad recently not too sure why it happened but if you are completing a full reset anyway the easiest way is the restore via itunes on your computer and then set up a new passcode again. Resetting via itunes doesnt require a passcode so it should go straight through.
Hope this helps -
we purchased photoshop elements thru amazon.ca.when we try to install it wants a 24 digit serial # and none of the #s we have matches what is asked for can anyone help?
Find your serial number quickly
Maybe you are looking for
-
FIOS Mobile App - Wireless Does Not Work
Hello all, I am trying to use the new FIOS Mobile app on my Android tablet. This should allow me to watch some live TV, however when I try to connect to a channel it tells me I need to be connected to my broadband router. In my setup at home my FiOS
-
How do I transfer my music to a new computer
Somehow I ended up with two apple accounts. Recently the PC I used for iTunes and syncing w/ my nano crashed and cannot be recovered. I also have a laptop which I had already "authorized for both apple accounts". only a small amount of my music co
-
How to switch off the red light (optical out) on my Audigy 2
I am not using the optical out most of the time, is there a way to switch off the red light coming out of optical out?red light is causing heat leading to cracks on the surface of the card.Please help soon. thx
-
How to upgrade the patches in ACS 5.1
I want to upgrade the acs 5.1 in distributed system. We have one hub/ primary ACS and two other spoke / secodary acs. I have following querry. Will it be possible to upgrad only one Secondary server.> Will updated secondary ACS will able to sych it c
-
Insert 50 rows, fire trigger once
Is there a way to create a trigger that fires once after several inserts, instead of firing for each inserted row. I want the trigger to fire once for a transaction.