Installing new languages into portal 10.1.4.1.0

Hi
I need to add additional languages to my portal installation.
I remember I did this successfully with portal 10.1.4 using the ptllang.sh command
that was on the 10.1.4 upgrade cd.
However this does not seem to work after an upgrade to portal 10.1.4.1
using patch set 2 for application server (patch 4960210).
It gives me this error:
NOTE : Portal Configuration Assistant (OPCA) has detected that the version of Portal repository to
which the language install was targeted is lower than the
version of the Portal midtier. Portal language install between different versions is not supported.
OPCA has skipped this language install.
The documentation says use the ptllang.sh on the upgrade cd, and since there is no ptllang.sh in the
patchset, I tried with the ptllang.sh on the 10.1.4 upgrade cd. But I guess this does not work since
the 10.1.4 cd probably sees that the portal repository version is not 10.1.4 but 10.1.4.1.
I have checked the database with this sql:
Select * from app_registry where comp_id like '%PORTAL%';
and it returns:
"COMP_ID" "COMP_NAME" "SCHEMA" "VERSION" "STATUS"
"PORTAL" "Oracle Application Server Portal" "PORTAL" "10.1.4.1.0" "VALID"
"MODIFIED"
"15-AUG-2007 12:50:49"
Is there any way to get around this so that I can add support for more languages?

No, sorry, I can't remember having that problem when I installed languages.
But I found the solution for the 10.1.4.1 problem, it is described in metalink:
Note:413890.1
Suggested solution is install patch 5880782.
Espen

Similar Messages

Add a new language into Portal R2

Hi all,
does someone know if it is possible to add a new language to Portal release 2. I know Portal is translated into 29 languages, but all languages of European Union candidate countries are not present yet.
Any idea ?
Thanks a lot.

On the windows platform:
use langinst.cmd in %ORACLE_HOME%\portal\admin\plsql for this purpose.

How to install multi language in Portal?

Hi,
Can someone give me the directions in how to install multi
language in Portal? I found the "langinst.cmd" file under
ORACLE_HOME\portal30\admin\plsql, also another
file "langinst.sql" under ORACLE_HOME\portal30
\admin\plsql\nlsres.
I am not quite sure how I can do that, which file I should use.
And once I installed the multi language, can I just go into
portal to create a new content area and using the multi language?
Thanks for any comment in advance!
Kelly.

Hi Kelly
You need to identify parameters for this file and run file. Its
langinst.cmd for WINNT and langinst.csh for UNIX.
1.     From the dos prompt , go to the following directory on
your server.
     Oracle/iSuites/portal30/admin/plsql/
2.     Set the Oracle_Home to = oracle/iSuites/
3.     Run the command
langinst.csh -s portal30 -p portal30 -o
PORTAL30_SSO -d PORTAL30_SSO -c oid -l ar -available
s - schema
p - password
o - < login server - in your case it may be portal30_SSO >
d - <password- maybe portal30_sso>
c - connect string
l - language (which is set to ar )
ar is arabic which i ve set
Good Luck
Regards
Yogesh

Installing new HDD into an iMac G5 with SATA

Installing new HDD into an iMac G5 with SATA and would like to know how to migrate the old system over to the new drive. Can I use a USB2 external drive, move all the old data, then select the new system as the boot system?

lwolfcc-
Yes.
But you might do better with a program like SuperDuper, as it will be sure to copy any hidden files as well.
Luck-
-DaddyPaycheck

Can i add new language into my L1520?

Question is simple, can i add a new language into my L1520 ? I bought it in Russia, and in options menu i just found several languages like spanish,english,french,Azerbaizhanish,even if chanise. But i need Turkish language. Can i download it somehow?
Your help appraciated. Thanks in advance
Currently using giant, amazing black Lumia 1520
Solved!
Go to Solution.

If it's not listed in language+region settings, then you cannot download it, maybe that's why Nokia did not release it in Turkey yet
BTW, you would get the same answers from same person in your own language if you've visited local boards
The silence will fall

HT3562 how can install new language in iPod..?...

How can install new language in iPod? Like a Karen fonts any of Karen of Karen fonts.....

All you can do is gert a newer model iPod.

Install Chinese Language into Curve 9380

Hi, I am having problem installing Chinese language into my Curve 9380, I have installed the Blackberry Desktop Software and install the most updated Version 7.1Bundle 2039 into my phone, when I load the "Applications",inside the Blackberry Desktop Software, there is no Chinese language in the "Language and Input Support". It does have a "East Asian Characters and Font Support", but when I tried to change my language to Chinese, I can find it in my phone, my current wireless provider is Celcom Malaysia.
Please assist as I am really get annoyed by this.
Thanks.
Regards,
Lai Men Hua

Hello menhua07,
Welcome to the BlackBerry Support Community.
Language package availability for your BlackBerry® smartphone is determined by your wireless service provider.
For more information regarding this, see the following article:
How to obtain language packs for BlackBerry smartphones - http://www.blackberry.com/btsc/KB13067
You may want to contact them for further information.
Let us know if you have any other questions.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Cant install new language package on mobile dictio...

Hi,
im trying to install on my 5800 new language(thai)
i have english,hebrew.bulgarian,
when im install the thai language , the software want to remove other language and i need to choose , but i can remove only the hebrew language.
i want to remove the bulgarian, and there is no option to remove it..
i hope there is a solution for this problem..
there is a way to uninstall all the dictionary software and reinstall it with the language that i want to install ?

Hi there!
Regarding your concern in downloading a language package for your phone 5800 XpressMusic, actually it's possible you just have to open the diction ary application on your phone then once it prompts you Only English Language install, install other language? so press yes and it will direct you to the Nokia Website, but if you don't see it press Options inside the mobile dictionary and then look for Language and then you have there the selection download, same thing you'll be routed to the Nokia Website, just select the Language but make sure that the language is being used in your country because if your phone will not support it, you will not be able to use that language you downloaded.
Hope tis' help!
"If you think this post is helpful, please click on the green button"

How to add a new language in portal?

Hi,
I have a requirement to add new language(Marathi) in portal.Using the thread 468191 i configure it in portal content translation.but the language is not visible in personalize option.How to acheive this ?
Regards
Bala

Bala,
In that thread, check Deeps' post
For Hindi to come in drop-down list, I put the languages_hi.properties in umeuseradminbase.jar file and put the entry hi=Hindi in languages_hi.properties, languages_en.properties and languages_de.properties only and remain all other files as it is. After that restarted the server
So probably you might have to do a similar thing for Marathi.
Also, refer to this thread.
https://www.sdn.sap.com/irj/sdn/thread?messageID=6043933#6043933
Good Luck!
Sandeep Tudumu

Installing new application into WP8.1 device fails

According to documentation 8.1 should support installing new LOB apps (not only updating existing ones). Unfortunately I get error 404 for executing DownloadInstall node. When I install app via Company Hub and then uninstall it (so that nodes remain in the
device cache then the installation works OK.
Has anyone managed to do clean install of company app?
This is my code:
<Add>
<CmdID>2</CmdID>
<Item><Target>
<LocURI>./Vendor/MSFT/EnterpriseAppManagement/7750091/EnterpriseApps/Download/%7B054FC735-BAB4-476D-95F0-44C48A948808%7D</LocURI>
</Target>
<Meta>
<Format xmlns="syncml:metinf">node</Format></Meta></Item>
</Add><Atomic><CmdID>6274</CmdID>
<Replace>
<CmdID>3</CmdID>
<Item><Target>
<LocURI>./Vendor/MSFT/EnterpriseAppManagement/7750091/EnterpriseApps/Download/%7B054FC735-BAB4-476D-95F0-44C48A948808%7D/Name</LocURI>
</Target>
<Meta>
<Format xmlns="syncml:metinf">chr</Format></Meta><Data>SmartCare</Data>
</Item>
</Replace>
<Replace>
<CmdID>4</CmdID>
<Item><Target>
<LocURI>./Vendor/MSFT/EnterpriseAppManagement/7750091/EnterpriseApps/Download/%7B054FC735-BAB4-476D-95F0-44C48A948808%7D/URL</LocURI>
</Target>
<Meta>
<Format xmlns="syncml:metinf">chr</Format></Meta><Data>https://xxx.xxx.xx/shared/applications/20141124170026-8752-4227.application</Data>
</Item>
</Replace>
<Replace>
<CmdID>5</CmdID>
<Item><Target>
<LocURI>./Vendor/MSFT/EnterpriseAppManagement/7750091/EnterpriseApps/Download/%7B054FC735-BAB4-476D-95F0-44C48A948808%7D/Version</LocURI>
</Target>
<Meta>
<Format xmlns="syncml:metinf">chr</Format></Meta><Data>1.0.0.0</Data>
</Item>
</Replace>
<Exec>
<CmdID>6</CmdID>
<Item><Target>
<LocURI>./Vendor/MSFT/EnterpriseAppManagement/7750091/EnterpriseApps/Download/%7B054FC735-BAB4-476D-95F0-44C48A948808%7D/DownloadInstall</LocURI>
</Target>
<Data>1</Data>
</Item>
</Exec></Atomic><Final/>

No, sorry, I can't remember having that problem when I installed languages.
But I found the solution for the 10.1.4.1 problem, it is described in metalink:
Note:413890.1
Suggested solution is install patch 5880782.
Espen

Installing new ios into flash

this is the reading i currently get when i boot the switch(3548-XL-EN)...how do i load new ios into flash.....
C3500XL Boot Loader (C3500-HBOOT-M) Version 12.0(5.2)XU, MAINTENANCE INTERIM SOF
TWARE
Compiled Mon 17-Jul-00 18:42 by ayounes
starting...
Base ethernet MAC Address: 00:04:6d:f9:ee:00
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 1 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 3612672
flashfs[0]: Bytes used: 1536
flashfs[0]: Bytes available: 3611136
flashfs[0]: flashfs fsck took 2 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
The system is unable to boot automatically because there
are no bootable files to boot.
switch:

Thanks very much!!
Loaded the software but got the following while loading it and could ionly recognise the twio giagabit ports...all 48 fastethernet ports were missing
3611648 bytes available (1024 bytes used)
switch: copy xmodem:c3500XL-c3h2s-mz.120-5.WC3.bin flash:c3500XL-c3h2s-mz.120-5.WC3.bin
Begin the Xmodem or Xmodem-1K transfer now...
CCCCCCCCCCBB0BB0xmodem:c3500XL-c3h2s-mz.120-5.WC3: I/O error
switch: copy xmodem:c3500XL-c3h2s-mz.120-5.WC3.bin flash:c3500XL-c3h2s-mz.120-5.
WC3.bin
Begin the Xmodem or Xmodem-1K transfer now...
CCCCCCCCCC........................................rrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrru
Switch#sh post
C3500XL POST FAILURE: Ethernet Controller Test: Failed
C3500XL POST FAILURE: MII Test: Failed
Switch#
this also came up at boot up
FOUND an unknown transceiver on port 34
FOUND an unknown transceiver on port 45
FOUND an unknown transceiver on port 46
FOUND an unknown transceiver on port 47
FOUND an unknown transceiver on port 48
FOUND an unknown transceiver on port 49
FOUND an unknown transceiver on port 50
FOUND an unknown transceiver on port 51
FOUND an unknown transceiver on port 52
thanks
josh

I want to install urdu language into iphone5

Hi can anybody help me how to install urdu language in my iphone 5.I realy want like other languages like I can see I can add hindi or arbia keyboard but not urdu pls suggest me how ican get urdu language in iPhone5? Thanks

If it is not offered, give Apple feedback about the need at http://www.apple.com/feedback

Installing New Hardrive into Macbook Pro 13" and can't boot

I have installed a new 500Gb 5400rpm drive into my macbook pro 13. Before I swapped the drives I used time machine to back-up onto my Lacie drive. Now the new drive is in. I turned on the computer, pressed the option button and nothing came up. I have now put my old HD into an enclosure and booted up from that drive. I copied my whole hd over to the new drive once it was formatted and tried to boot but this didn't work. I thought once I had the time machine back-up on a drive I would be able to press option when I turn on the computer and then that would workj. I don't have my OSX 10.6.8disk so am now just booting up off my old hd which is pointless. Can anyone help as I am losing my mind.

What happens when you install the original HDD in the MBP? If it does not boot , the connecting cable may be faulty.
Ciao.

Can Care Centre install another language into 5800...

My phone is purchased in Malaysia, and I'm using original firmware which only support input in Malaysian language, Indonesian language, English and Simplified Chinese.
I wish I can TYPE Traditional Chinese (Hong Kong) on my phone (it's able to display both traditional & simplified Chinese, actually I can also input Traditional Chinese by handwriting but I found that typing is easier to me than handwritting)
So can anyone tell me if I can ask the Nokia Care Centre to install language pack into my phone so that I will be able to do so?
Great thanks!!!!!!!!!!!
p/s I prefer to input by stroke, not pinyin, and I want Chinese (Hong Kong), not Chinese (Taiwan)^_^
Solved!
Go to Solution.

Care center can install language packs.. but it may be related to the regiononly..Also there may be a cost involved.. and the worst thing is any firmware update will remove it...
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

How to install new language??? == french

By mistake I remove all language from my blackBerry Bold 9900.
Remain only English.
I would like to add again other language ==> exemple french...
Into desktop software I do not have in Applications : "Language and Input Support" to choose...
Solved!
Go to Solution.

Hi and Welcome to the Community!
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
Use this KB to help you choose the right OS variant so as to include the language(s) you desire:
Article ID: KB05305 Localization support for BlackBerry smartphones
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue. During the process, when it presents you with the Application Loader screen of things to choose to install to your device, be sure to expand ALL selections and select ALL items that pertain to your desired language(s).
Once the OS is loaded, you can proceed with activating (on the device) the language you desire as well as restoring from your backup.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Installing new languages into portal 10.1.4.1.0

Similar Messages

Maybe you are looking for