Installing new Nforce drivers?

I'm running the lastest Nforce driver pak from MSI on my K7N420. When the new Nforce drivers from Nvidia come out (Soon I hope) should I be able to install them over the MSI Nforce drivers I'm running now? If not, could someone please tell me an easy way to uninstall old Nforce drivers, MSI or Nvidia.
Thanks
Dennis

Thanks for the reply. One more quick queston. I'm running an Gf4 add in card so removing the Nvidia display drivers in Add/Remove does the video drivers, I know this one. What listing in Add/Remove removes the Nforce drivers?
Thanks
Dennis

Similar Messages

HT1338 Having difficulty printing with my HP Photosmart 7510 C311a after Maverick upgrade. Tried to install new HP drivers, but thwarted by demand for address under IPVA.

Having difficulty printing with my HP Photosmart 7510 C311a after Maverick upgrade. Tried to install new HP drivers, but unsuccessful.

It did not work after all...
@CHH: This is wheere I downloaded the printer drivers:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=nl&lc=nl&dlc=nl&soft wareitem=mp-84878-2
Good luck and keep us all posted on how you're doing with this problem!
Message was edited by: willem69limbo

Alcahol 120 percent and new nforce drivers

http://www.nforcershq.com/forum/viewtopic.php?t=34891
latest version told me with new nvidia drivers i had no burner
so im using an older one
well this seems to be the fix
Making it work with the updated IDE drivers is easy, in options change the 'Device Control Interface' from default to the other one. Restart Alcohol 120% and all your devices should be listed.
might save some one a headache

Concerning the IDE driver. Same as all the other versions Nvidia has released for me. Complete junk. Also, it appears they removed the file. The links to it are dead or redirected to the 4.12's...which are also junk.
1. Breaks my Sound Card. System hangs on audio driver install then will no longer boot, except to Safe Mode to remove the driver, due to nForce gameport incompatibility. Standard IDE does not hang, then Gameport can just be disabled (since the nForce2 chip breaks it anyway).
2. Breaks Easy Recovery Pro (data recovery software) and who knows what else. When it attempts to scan the drives, it fails with a Windows error. Standard IDE driver works fine.
3. SiSoft Sandra reports slower speeds than standard IDE driver.
Standard score 35247 kB/s
Nvidia score 30124 kB/s

New nforce drivers realeased today (7/29/03)

minty fresh nforce drivers available at nvidia! version 2.45. will test after LSAT class.

For anyone interested here are the Revision Notes:
Quote
WHQL certified kit for nForce and nForce2 (NOTE: the graphics drivers in the English only kit is not WHQL certified. However, it is the same driver version as the international kit)
Includes support for nForce2 400 and nForce2 Ultra 400
EAX fixes and compatibility improvements in
* Operation Flashpoint
* Neverwinter Nights
* The Matrix Reloaded
* Grand Theft Auto: ViceCity
* Mafia
* Battlefield 1942
Updated audio control panel
3D audio performance improvements
NOTE: NVIDIA accelerated IDE drivers are not included in this release.
And the Installation Note:
Quote
Windows XP users must install Service Pack 1 prior to attempting to install this package. Failure to do so will result in the inability to support USB 2.0.
Audio drivers will not install on the following nForce2 products: Chaintech 7NJS. Please use the drivers that come with these products to enable audio functionality.
Take Care,
Richard

New Nforce drivers 5.1

These are the new official Nforce drivers (5.1):
http://ftp://download.nvidia.com/Windows/nForce/5.10/nForce_5.10_WinXP2K_WHQL_english.exe

Quote
Originally posted by syar2003
This is the agp driver from Nvidia's 4.27 pack
; nv_agp.inf
; NVIDIA Windows 2000 AGP INF file
; Copyright 1999-2002 NVIDIA Corporation. All Rights Reserved.
[Version]
CatalogFile=nv_agp.cat
Signature="$WINDOWS NT$"
Class=System
ClassGuid={4D36E97D-E325-11CE-BFC1-08002BE10318}
Provider=%NVIDIA%
LayoutFile=layout.inf
DriverVer = 10/29/2003, 3.7.7
This is the agp driver from MSI's 5.01 pack:
; nv_agp.inf
; NVIDIA Windows 2000 AGP INF file
; Copyright 1999-2002 NVIDIA Corporation. All Rights Reserved.
[Version]
CatalogFile=nv_agp.cat
Signature="$WINDOWS NT$"
Class=System
ClassGuid={4D36E97D-E325-11CE-BFC1-08002BE10318}
Provider=%NVIDIA%
LayoutFile=layout.inf
DriverVer = 10/29/2003, 3.7.7
This is the agp driver from Nvidia's 5.10 pack:
; nv_agp.inf
; NVIDIA Windows 2000 AGP INF file
; Copyright 1999-2002 NVIDIA Corporation. All Rights Reserved.
[Version]
CatalogFile=nv_agp.cat
Signature="$WINDOWS NT$"
Class=System
ClassGuid={4D36E97D-E325-11CE-BFC1-08002BE10318}
Provider=%NVIDIA%
LayoutFile=layout.inf
DriverVer = 04/02/2004, 4.3.6
So the answer is that it's newer compared to MSI 5.01 pack and Nvidia 4.27 pack.
Agp/gart version 3.77 in MSI 5.01 driverpack and in nvidia's 4.27 driverpack .
And agp/gart version 4.36 in nvidia's 5.10 driverpack .
Basically there is nothing new in the Gart department that has not already been out, none of the above solve the punkbuster freezing problem with the K8N Neo Plat. mobo. Neither does the following Gart below which is newer then all of the above:
; nv_agp.inf
; NVIDIA Windows 2000 AGP INF file
; Copyright 1999-2002 NVIDIA Corporation. All Rights Reserved.
[Version]
CatalogFile=nv_agp.cat
Signature="$WINDOWS NT$"
Class=System
ClassGuid={4D36E97D-E325-11CE-BFC1-08002BE10318}
Provider=%NVIDIA%
LayoutFile=layout.inf
DriverVer = 04/27/2004, 4.4.0
As far as Im aware that is the newest Gart driver available (please correct me if Im wrong), and its dated flipping April!!! Its Flipping September!!! still we have this problem, I wish nvidia would release something a bit more upto date.

MEGA 180 Users - new nForce drivers available!

version 5.10 of the nForce drivers are available from nvidia
http://www.nvidia.com/content/drivers/drivers.asp
the audio drivers have had a "fix" it would seem

nForce driver set v5.1 did not make any visible harm to my Mega180.
The strange thing though is that VGA driver version did not change after the installation, and I am now 3 levels behind from what MSI offers via Live Update...

New nforce drivers

"Again it is Asus who has some new drivers for the nForce series. The packages are available for Windows XP and 9x/ME. Each about 15Mbyte in size were uploaded today and contain partially WHQL'd drivers. "
audio driver 2.96
Audio utilities 2.97
Network driver 2.81 (WHQL'd)
GART driver 2.78 (WHQL'd)
SMBus driver 2.75 (WHQL'd)
Memory controller driver 2.75 (WHQL'd)
IDE driver 2.70 In The Box
IDE driver 2.97 Full Driver
Installer 2.97
U can get them here Link

As said at nForcersHQ
Quote
I installed them, and for the very first time the sound panel is fully functional! All sliders are working, and also the localization is fine. No idea if the drivers fixes any bugs, but until now they are the best ones for me. Good 2 see that nVIDIA is working on driver support.
Greetings from germany,
JePe

Installing new NVIDIA Drivers in Windows XP (under Boot Camp)

Greetings,
This may seem like a stupid question, but I'll ask anyway. Are we able to download and install the latest 9600M GT WinXP Drivers made available here: http://www.nvidia.com/object/geforcenotebook_winxp_185.85whql.html ?
I noticed the ones that came with my MBP 15" are 177.56, but NVIDIA has posted new ones, 185.5.
Can I update to the latest drivers or am I restricted to the ones that came with my MBP and Leopard Installation?
Thanks!

I have been repeatedly advised by Apple that future Boot Camp upgrades may not install properly if users have installed different drivers manually.
I had experienced this myself on my late 2007 MacBook Pro, and I had to roll back the drivers in order to upgrade Boot Camp.
Many issues have been reported about driver conflicts in Boot Camp on the unibody MacBook Pros, and Boot Camp is definitely due for an update. For these reasons, I have chosen not to manually update drivers on my unibody MacBook Pro.
I hope that this helps!
Good luck!

Installing new NVIDIA Drivers in Windows XP

Greetings,
This may seem like a stupid question, but I'll ask anyway. Are we able to download and install the latest 9600M GT WinXP Drivers? I noticed the ones that came with my MBP 15" are 177.56, but NVIDIA has posted new ones, 185.5.
Can I update to the latest drivers or am I restricted to the ones that came with my MBP and Leopard Installation?
Thanks!

Hi Wilde,
Apple recommends to only use the BootCamp Drivers they provide.
However you can tryout these Nvidia driver http://www.nvidia.com/object/geforcenotebook_winxp_185.85whql.html
Make sure to make a backup of your Windows before installing them.
Or at least make a System Restore Point.
Some people use DriverSweeper http://www.guru3d.com/category/driversweeper/ to remove the 'old' drivers prior to installing the new ones.
Take care
Stefan

Unable to install new display drivers

When I'm in Windows 7, I want to update my display drivers because the ones I have are very old. However, when I try to install them using the Catalyst-program from ATI, they say everything installed, but nothing is there. I've checked the install catalogue, but it's empty. I've checked on Device Manager on my display drivers, and it's still the old one.
The one I have installed is version 8.661.0.0, dated 2009-09-23. The newest one is like 10.2.
This is seemingly affecting the performance on my computer because I can't use the new drivers.
I've tried uninstalling the old ones and installing the new, didn't work. Tried using Driver Sweeper, didn't work. I don't know what to do, or if it's even possible to upgrade the drivers.
I have ATI Radeon HD 4850.
null

I have installed the 10.3 on my 27" imac. i was able to play games on it with no problems.. xD
installing it was pretty easy,
1) install Catalyst 10.3 and follow the steps until you reached the finish page
2) go to your Device Manager and look for Display Adapter
3) click on it, and a sub tab should appear, mine was ATI radeon HD 4670
4) right click and click update driver
5) there should be 2 options which is search online and find on your disk...
6) choose the second option
7) that should bring you to the next page which you should click on the 'I have the file' option
8) this should you bring you to a page with existing drivers
9) click on have disk
10) and search for the ATI file which you download.
11) follow along the path, ATI>10_3xxxxxx>*something inbetween* > package>display>CL_xxx file ( i am currently not on the windows and just rambling based on memory, so pardon me.. =P)
11) after selecting OK it should display a long list of drivers inwhich you just find yours
12) install! the com should prompt you about how unsafe it is, but just click OK
13) after the driver is install, it should be okay to try any games without any error.
I hope this help you, but i do have one problem... once i have installed the driver, it works fine, but when i restart my computer, it will have a BSOD and i would have to restart and reinstall the driver... i'm pretty sure something is wrong with it... so if anyone has the same problem and have found a solution, please do tell me!... xD

New nForce drivers next week!

According to a German source (with an interview with nVidia), new drivers are supposed to be released next week.
A knowledgeable individual @ NForcer's HQ, who claims to have some inside info on this, says that we will be very pleased with the update(s).
I predict that it's true on both counts. nVidia is in too precarious of a position to let their current client base down if it wants to stay ahead of the competition and stay ahead of AMD MB rivals as they maintain their dominant chipset share.

Well, of course... just like the 2.42 set was going to cure everyone's ills. I sense an opportunity for another round of complaints ... just kidding... you can always hope.

New nforce drivers ide and audio

Nvidia has released version 1.08.5 of its System Utility on 31 March 2004 and can be downloaded here:- http://www.nvidia.com/object/sysutility_1.08.5.html
Windows XP/2K Audio driver package 4.31 can also be downloaded here:- http://www.nvidia.com/object/nforce_audio_4.31_win2KXP
and Windows XP/2K IDE driver package version 4.12 can be downloaded here:- http://www.nvidia.com/object/nforce...15_win2KXP.html

Concerning the IDE driver. Same as all the other versions Nvidia has released for me. Complete junk. Also, it appears they removed the file. The links to it are dead or redirected to the 4.12's...which are also junk.
1. Breaks my Sound Card. System hangs on audio driver install then will no longer boot, except to Safe Mode to remove the driver, due to nForce gameport incompatibility. Standard IDE does not hang, then Gameport can just be disabled (since the nForce2 chip breaks it anyway).
2. Breaks Easy Recovery Pro (data recovery software) and who knows what else. When it attempts to scan the drives, it fails with a Windows error. Standard IDE driver works fine.
3. SiSoft Sandra reports slower speeds than standard IDE driver.
Standard score 35247 kB/s
Nvidia score 30124 kB/s

Installing new database drivers

HI
I need to build connection between two databases through ESB but the target database will be MS SQLServer or MySQL. My question is how to add new database driver to OAS to configure the connection with non Oracle database?

you can drivers in applib; or any other directory and add the path in global libraries in server.xml
Here is sample: http://radio.weblogs.com/0137094/2004/05/04.html
After that, you can use EM to define the connection pool and data-sources.

Installed New Epson Drivers; Now No Duplex

I installed, via Software Update, the newest Apple drivers for my Epson RX680 printer. Now I find I can't print on both sides of the paper. It says no duplexer is available.
Anyone else seeing this?

Well, I think I've answered my own question here.
On my system, anyway, I was having trouble with the Auto Duplex setting not being available in all applications.
It turns out the problem was "cured" by going to the Presets drop down in the Print dialog box. I saw Standard was selected there, so I selected it again in the drop down. Voila!!! Now the Auto Duplex is available, whereas before it was grayed out.
I'm not even sure why I stumbled onto this, as I NEVER have a need for the Presets "feature", and have never had anything in them.
Anyway...all my printer functions are working now. (The card reader in this printer died several months ago, but I can live without it).

K7n2g lost 32 bit colour after installing new nvidas drivers

can any one help i've lost 32 bit colours since i updated my nivida drivers, i done full uninstall with a washer b4 hand, and then i put the latest driver's on

yep tried desktop there no 32bit choice, as for memory i got 256 single sided in slot one and a double 256 in slot 2, i cant stick any thing in slot three as if i try i cant boot, what if i try swaping them around?

Installing new Nforce drivers?

Similar Messages

Maybe you are looking for