Installing new ram memory

Hello All,
I have recently installed a new ram into my mac. I installed a 2GB ram and put it into the right slot. I left the memory in the left slot there. Everything seems to be running fine (and faster) however everytime I close the lid to my mac and reopen it, the whole computer starts up as if I have shut it down. I never shut it down though. Can someone tell me if I did something wrong and if I can fix it?
Thank you so much!

As for your last two question I don't really understand them...
OK.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
2nd one, since you have a Laptop, I was wondering if it was running off the Battery or plugged into AC with the charger?

Similar Messages

  • Installed new RAM now computer wont start up

    I just installed 2GB of RAM in my iMac and removed the 512mb card it had originally.when i pressed the power button it beeps fast a few time then the fan starts working really fast. The screen doesnt turn on only the sleep light blinks as the fan runs. I replaced one of the new cards with the original 512mb card and it starts but when i check the memory the slot where the new 1GB card appears "empty" why could this be? did i install incorrectly?

    When you install new RAM you have to push much harder than you think you should. You won't damage the RAM, but you have t give a mighty push to seat it, make sure you hear a click.

  • 4 hrs later - Computer shut down after installing new RAM (mid 2007 Imac)

    Mid 2007 imac and I installed new Ram. It worked for 4 hrs then the Imac shutdown. The pressed power button but no power. Unplugged and replugged the power cord and 3 beeps sounded. I am wondering if it worked for 4 hrs or so, then why did it would it fail 4 hrs later?
    I am running the correct ram because in system profiler under memory - it said that everything was ok.
    Any ideas?

    or maybe the back tray wasn't tight enough?
    I re-installed it now and so far so good.... I pressed tight and in an upwards motion. We'll see what happens

  • Checking & installing new RAM

    Hi,
    I have a Pavilion dv7 product number VG420AV notebook with 4 GB DDR3 system memory (2 DIMM).
    I am wanting to upgrade the memory to 8 GB.
    Hp told me to buy a 4GB, 1600Mhz, PC3-12800 memory module (SHARED).
    I am not sure if I need one stick or two.
    How do I check to see if I have an avilable slot to install new RAM ,& how do I install new RAM in my notebook? 
    Thanks fo the help.

    That is a dv7t-3100 model. 2 ways to find out about the RAM. 1. Download and install CPU-Z and look at the memory tab; or, 2. Just pull the back cover off and look. 
    Here is the Service Manual:
    Manual
    Page 4-17
    And you do say you have 2 DIMM(s) which is all the slots available so to upgrade you are going to have to remove and replace existing memory.
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Mac crashes regularly after installing new RAM

    My laptop crashes at least once a day ever since installing new RAM. It seems to be triggered by quitting programs, usually Firefox, Logic or Spotify. There was nothing else connected to the Mac that brought about the latest crash but I do use an Mbox 2 on a regular basis.
    Below is the last crash report and also the RAM profile. It's Kingston brand if that means anything.
    *_Crash Report:_*
    Interval Since Last Panic Report: 55868 sec
    Panics Since Last Report: 1
    Anonymous UUID: AEEF5666-4C4E-4FC1-AC7A-5A500F952BF9
    Sat Jan 22 00:00:25 2011
    panic(cpu 1 caller 0x2aab55): Kernel trap at 0x8b042474, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x8b042474, CR3: 0x00100000, CR4: 0x00000660
    EAX: 0x09947100, EBX: 0x09ad4a00, ECX: 0xe15f0000, EDX: 0x0a133800
    CR2: 0x8b042474, EBP: 0x5294bb68, ESI: 0x08bd7f40, EDI: 0x0085f838
    EFL: 0x00010246, EIP: 0x8b042474, CS: 0x00000008, DS: 0x03450010
    Error code: 0x00000010
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x5294b968 : 0x21b50c (0x5d42fc 0x5294b99c 0x223974 0x0)
    0x5294b9b8 : 0x2aab55 (0x59616c 0x8b042474 0xe 0x596336)
    0x5294ba98 : 0x2a09a8 (0x5294bab0 0x246 0x5294bb68 0x8b042474)
    0x5294baa8 : 0x8b042474 (0xe 0x48 0x52940010 0x230010)
    0x5294bb68 : 0x1854f8f (0x9ad4a00 0x0 0x5294bbf8 0x60)
    0x5294bb88 : 0x4ff5ae (0x9ad4b00 0x85f838 0x1 0x0)
    0x5294bba8 : 0x50f6e0 (0x9ad4b00 0x85f838 0x5294bbd8 0x4ff931)
    0x5294bbd8 : 0x50f854 (0x8bd7f40 0x0 0x1 0x0)
    0x5294bbf8 : 0x4ff5ae (0x8bd7f40 0x0 0x1 0x1)
    0x5294bc18 : 0x4ff5c9 (0x8bd7f40 0x0 0x5294bc48 0x4ff5ae)
    0x5294bc38 : 0x531e12 (0x8bd7f40 0xffff 0x8bd4f84 0x4ff5c9)
    0x5294bc58 : 0x531e45 (0x8bd4f80 0x246 0x5294bc98 0xb18e540)
    0x5294bc78 : 0x4ff5ae (0x8bd4f80 0x0 0x1 0x1e)
    0x5294bc98 : 0x4ff5c9 (0x8bd4f80 0x0 0x5294bce8 0x0)
    0x5294bcb8 : 0x2844eb (0x8bd4f80 0xb18e540 0x1e 0x5294bce8)
    0x5294bd08 : 0x21d8d1 (0xa088398 0xb2555a0 0x997aa24 0x1)
    0x5294bd48 : 0x210a3a (0xa088300 0x12 0x5294bda8 0x20f45c)
    0x5294bda8 : 0x21dda0 (0xa088300 0x10000 0x0 0x2107c2)
    0x5294bdd8 : 0x23f567 (0x5294bdfc 0x24 0xa4289e4 0x0)
    0x5294be28 : 0x214f6f (0xb18e540 0x1 0x1 0x221bb4)
    0x5294be78 : 0x215581 (0x7fc7420 0x33303 0x43dfe330 0x8f1e1f4)
    0x5294beb8 : 0x22c521 (0x7fc7420 0xc971640 0x5294bf08 0x47a0f3)
    0x5294bf08 : 0x47ab28 (0x8f1e1f4 0x0 0x0 0x2ea2)
    0x5294bf58 : 0x47ab56 (0x8f20000 0x0 0xc971684 0x0)
    0x5294bf78 : 0x4f0f7d (0x8f20000 0xc971640 0xc971684 0x0)
    0x5294bfc8 : 0x2a0ef8 (0xa1916c0 0x1 0x10 0xa194964)
    Kernel Extensions in backtrace (with dependencies):
    com.digidesign.mbox2.driver(8.0.0f1)@0x184e000->0x1871fff
    dependency: com.apple.iokit.IOAudioFamily(1.7.9fc4)@0x90c000
    dependency: com.apple.iokit.IOUSBFamily(4.1.7)@0x1232000
    dependency: com.apple.driver.AppleUSBMergeNub(4.1.5)@0x1292000
    dependency: com.apple.kext.OSvKernDSPLib(1.3)@0x908000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x948000
    dependency: com.apple.driver.AppleUSBComposite(3.9.0)@0x1266000
    BSD process name corresponding to current thread: Spotify
    Mac OS version:
    10H574
    Kernel version:
    Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
    System model name: MacBook7,1 (Mac-F22C89C8)
    System uptime in nanoseconds: 10016535514139
    unloaded kexts:
    com.apple.driver.AppleMCP89RootPortPM 1.11 (addr 0x11cd000, size 0x20480) - last unloaded 250987080117
    loaded kexts:
    com.digidesign.mbox2.driver 8.0.0f1 - last loaded 49888220612
    com.rogueamoeba.hermes 2.0.2
    com.paceap.kext.pacesupport.snowleopard 5.7.2
    com.Cycling74.driver.Soundflower 1.5.1
    tc.tctechnologies.driver.PaeFireStudio 8028
    com.digidesign.iokit.DigiIO 8.0.0f1
    com.digidesign.iokit.DigiDal 8.0.0f1
    com.apple.driver.AppleHWSensor 1.9.3d0
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AGPM 100.12.19
    com.apple.driver.AppleMikeyHIDDriver 1.2.0
    com.apple.driver.AppleMikeyDriver 1.9.9f12
    com.apple.driver.AudioAUUC 1.13
    com.apple.driver.AppleUpstreamUserClient 3.4.5
    com.apple.driver.AppleMCCSControl 1.0.17
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.driver.AppleHDA 1.9.9f12
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.6
    com.apple.driver.AppleIntelPenrynProfile 17
    com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
    com.apple.driver.AppleLPC 1.4.12
    com.apple.driver.AppleBacklight 170.0.34
    com.apple.GeForce 6.2.4
    com.apple.driver.AppleUSBTCButtons 200.3.2
    com.apple.driver.AppleUSBTCKeyboard 200.3.2
    com.apple.iokit.SCSITaskUserClient 2.6.5
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage 1.6.3
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AirPortBrcm43224 426.36.1
    com.apple.driver.AppleAHCIPort 2.1.5
    com.apple.driver.AppleUSBHub 4.1.7
    com.apple.nvenet 2.0.15
    com.apple.driver.AppleUSBEHCI 4.1.7
    com.apple.driver.AppleUSBOHCI 4.1.5
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleACPIButtons 1.3.5
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.5
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.driver.AppleSMBusController 1.0.8d0
    com.apple.driver.DspFuncLib 1.9.9f12
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.7.9fc4
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.9.9f12
    com.apple.iokit.IOHDAFamily 1.9.9f12
    com.apple.driver.AppleSMBusPCI 1.0.8d0
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.AppleSMC 3.1.0d3
    com.apple.driver.IOPlatformPluginFamily 4.5.0d5
    com.apple.nvidia.nv50hal 6.2.4
    com.apple.NVDAResman 6.2.4
    com.apple.iokit.IONDRVSupport 2.2
    com.apple.iokit.IOGraphicsFamily 2.2
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
    com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
    com.apple.iokit.IOBluetoothFamily 2.3.8f7
    com.apple.driver.AppleUSBMultitouch 206.6
    com.apple.iokit.IOUSBHIDDriver 4.1.5
    com.apple.driver.AppleUSBMergeNub 4.1.5
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOAHCISerialATAPI 1.2.5
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
    com.apple.iokit.IO80211Family 312
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.iokit.IOUSBUserClient 4.1.5
    com.apple.iokit.IONetworkingFamily 1.10
    com.apple.driver.NVSMU 2.2.7
    com.apple.iokit.IOUSBFamily 4.1.7
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.5
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.2
    com.apple.driver.AppleACPIPlatform 1.3.5
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBook7,1, BootROM MB71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.60f5
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
    Bluetooth: Version 2.3.8f7, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: TOSHIBA MK2555GSXF, 232.89 GB
    Serial ATA Device: MATSHITADVD-R UJ-898
    USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0x06630000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x06300000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
    *_Memory Profile_*
    Memory Slots:
    ECC: Disabled
    BANK 0/DIMM0:
    Size: 2 GB
    Type: DDR3
    Speed: 1067 MHz
    Status: OK
    Manufacturer: 0x0000
    Part Number: 0x000000000000000000000000000000000000
    Serial Number: 0x00000000
    BANK 1/DIMM0:
    Size: 2 GB
    Type: DDR3
    Speed: 1067 MHz
    Status: OK
    Manufacturer: 0x0000
    Part Number: 0x000000000000000000000000000000000000
    Serial Number: 0x00000000

    It's almost impossible to trace back the panic report to a specific cause, but it's highly suspicious that you started experiencing problems after installing new RAM.
    It's also strange that your RAM has no stated VendorID, Part Number or Serial Number.
    I would return this memory poste haste.
    Alternatively, if the DIMMs are from Kingston's ValueRAM range, just dump them in the garbage because that's where they belong. While you're there, look for any other RAM that someone else has thrown away - chances are its ValueRAM, too (hint: I have never seen a single ValueRAM DIMM work in any of my systems, so I avoid them like the plague - shame, since Kingston used to have such a good reputation).

  • Installed new ram, computer wont start up

    I installed 1gb of hynix ram. I tried setting it in different ways, but each time when i start up the computer it doesnt even get to the chime sound, the screen doesnt come on, my fan just runs loud and fast and nothing happens, but it starts up fine with out the ram. is there any hope of installing this ram?

    Generally if your computer won't start up after you have installed new RAM, either you have purchased the wrong type of RAM, or it is a bad module.
    As long as you are able to start up normally after removing the new RAM, and it is supported, it might just be a bad module. Contact Hynix to arrange for a replacement.

  • Installed new RAM, iPhoto still saying I have no memory...huh?

    Hello,
       I took my MacBook (early 2008) to the Apple store.  They told me I had enough memory to install Snow Leopard, but it would run very slow.  Note: I had 10.6.3 installed for a long while and it just kept getting slower, so that's originally why I took it there.  So I had the hard drive wiped clean and Re-installed everything (the box set), all on the hardrive.  I ordered the RAM that I was told to, he gave me the part number and everything.
       So even before I got the new RAM, I tried to import my saved pictures to iPhoto.  iPhoto gave me this error message:
    iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library.
    I hoped when I installed the new RAM that this would solve the problem... but it didn't, I still got the message.  I even tried just importing 1 photo and it gave me the same message.
    What to do?  I'm confused.
    Please Help!  Thanks,
    Leslie S.

    You are confusing short term memory (RAM) with long term storage (Hard Drive), the message is referring to permanant storage space (Hard Drive) adding Ram will make no difference.
    How much space is left on your hard drive, and how large is it in total. Right click on your hard drive (usually called MacintoshHD) and select get info,, you'll see a panel just like this:
    Tell us what it says next to 'Capacity' and 'Available'

  • Installed new Ram = 3 Beeps

    Hello! I wanted to max out my iMac (7,1) with RAM so I bought a couple new chips from Other World Computing. It came yesterday and I went home all excited to install it. I did, and on startup all I get is three beeps repeating endlessly. I opened the slot back up and made sure they were seated well and they were. Same thing. Put the old RAM back in and it started fine. Gah! How disappointing and frustrating!
    Here is the RAM I got:
    2GB PC5300 DDR2 667MHz 200 Pin SO-DIMM
    4GB PC5300 DDR2 667MHz 200 Pin SO-DIMM
    Any ideas would be much appreciated!

    Through an a separate email inquire with OWC, I got this response:
    +The 3 beeps from your Mac indicate it doesn't see any memory. This is not uncommon as Apple's RAM is a slight bit thinner than third-party modules, and as such, our modules need an a bit extra pressure to fully seat them into their rather tight socket.+
    +See if the modules can go another 1/8th inch (3mm) into the socket.+
    I'm pretty sure I seated the new RAM properly, but I'll make sure to check that as well.

  • Windows 7 doesn't load afther install new RAM

    Hi, i have buy for my Toshiba Satellite L655-1JV  2x4GB of RAM from PNY ( http://www.pny.eu/product/p-23-183-704/Laptop-Upgrades/Sodimm-DDR3-1600MHz-PC3-12800-4GB/ ) and afther i install the new RAM my windows 7 show's a blue screen error while starting, also don't allow me to start in any other mode like save mode and even won't allow me to go to recovery mode, but on bios i can see that the computer detects the 8GB of RAM.
    I have reset bios and updated it, i have try to boot with only one slot of 4GB but always the blue screen error, i even have reinstalled windows and donne all again but always the wonderfull blue screen error. 
    When i change for the old ones, 2x2GB, it runs always perfectly.
    I will apreciate some help, tanks
    Solved!
    Go to Solution.

    Did you use the PNY memory configurator - Here
    Obviously the ones you ordered are incompatable with your system or bad. Contact who you bought them from.
    Crucial suggest these - Crucial memory for L655-1JV
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • Installing new RAM and need help!

    Hello everyone, I have this exact same computer model found here: http://wow-rebates.com/lenovo-3000-k100-57068352-intel-desktop-pc/
    This means that I have 4 slots of RAM, but 3 are currently being used by 1 GB sticks of DDR2 PC2-5300 @ 667. I just bought a stick of RAM today that is exactly the same as the other 3 (its a 1 GB stick of DDR2 667). However, after I installed it, it freezes at the first screen where it says "lenovo" in big white letters. It doesn't go any further than that, which is odd.
    Additionally, when using my new RAM stick with only 2 of the old ones (total 3 GB) it works fine, but whenever 4GB of RAM is in my computer it just isn't working properly. What might be causing my computer not being able to handle 4GB? Is there a dual channel option I have to enable or something? Help will be VERY much appreciated! =)
    Message Edited by kingholman on 08-25-2008 08:45 PM

    Hummm, did you get into the Bios screen and check to see if the 4th gig is runnin? will pop up as 4 gigs in Memory. If not move the sticks around, if not get a new stick. If it show in bios then it's working.
    In Vista though you only get 3gigs max unless you run 64bit.
    I am using Kingston for $27   working fine.
    Lenovo 3000K100 Intel Core2 Quad Vista Home Premium BFG 8800GT-OC 512MB PCIe 500GB SATA HD 4GB PC-5300 DDR2 DVD +/- RW DL x2 SATA Creative X-FI Pro + Mods

  • Installing new RAM: Compatible with existing RAM?

    I've just ordered 8G of memory, 4 lots of 2G. I have 2x1G on board already. Will I need to uninstall the original RAM, or will it work happily with the new RAM?
    Secondly, I see a warning in the Apple installation document that I need to remove the battery to get at the memory slots, and that replacing the battery incorrectly could cause an explosion. Seriously? I'm nervous enough just installing the RAM. I could do without explosions.

    Rob Grant wrote:
    I've just ordered 8G of memory, 4 lots of 2G. I have 2x1G on board already. Will I need to uninstall the original RAM, or will it work happily with the new RAM?
    Depends on the manufacturer to be honest. I have 2GB of original RAM in my system with 10GB of OWC and they play happily together. I suppose it still holds true that you "get what you pay for" - they're not the cheapest, but I didn't break the bank.
    Rob Grant wrote:
    Secondly, I see a warning in the Apple installation document that I need to remove the battery to get at the memory slots, and that replacing the battery incorrectly could cause an explosion. Seriously? I'm nervous enough just installing the RAM. I could do without explosions.
    I honestly did not see that warning on my 2008 Mac Pro and simply powered down, unplugged the power cord, took both memory risers out and installed the modules per the instructions of OWC (Macsales.com) - Kappy has posted those for you.
    I've had them in for a couple of months now and couldn't be happier. I would suggest following Apple's instructions though, it could prevent serious damage to internal components caused by electrostatic shock.

  • Installed New Ram

    I just installed 4GB's worth of new Ram on my MacPro at the Office. I originally had two 512MBs for a total of 1gb. I bought (2) 2GB sticks and installed them myself. They work great, but I was wondering if my computer would run faster if I moved the 2GB's where the 512's are and moved the 512's to the back.
    I didn't notice much difference in rendering time in FCP 5.1. The system profiler does recognize the ram, telling me I have 5GBs of ram.
    I'm running dual 2.66ghz and Tiger 10.4.10

    Thanks a lot for the response. I'm not very tech savvy.. so if this helps any, here it how my ram is aligned per apple report:
    Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
    Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
    Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 667 MHz
    Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 667 MHz
    Are they in the correct risers? Or if I moved the (2) 2GBS from 3&4, to, 1&2, then moved the 512's to risers 3&4, would I see a speed difference?
    Thanks again.. sorry if I seem stupid.

  • Installing additional ram memory

    I am trying to install memory in my Mac Pro, but some of the risers come upon the hardware configuration panel as empty.  I have moved around the memory modules and they all work, but just not when they are all installed at once.  I have two sets of 2 gb modules and four 1 gb modules.  Two of the 2 gig modules are are Centon and two are another brand.  All of the 1 gig modules are exactly the same.  Currently, I have 4x1GB modules installed and 2x2gb modules installed.  My computer is reading the 2 GB modules, but only reading two of the 1GB modules.  Here's my Mac configuration:
    Model Identifier:    MacPro2,1
    Processor Name:    Dual-Core Intel Xeon
    Processor Speed:    2.66 GHz
    Number Of Processors:    2
    Total Number Of Cores:    4
    Memory:    6 GB
    Bus Speed:    1.33 GHz
    When I putt all four of the 2GB modules in the first two slots and the four 1GB modules in the last two, the computer read the 1 GB modules but one of the 2GB modules?????  When I removed all of the 1 GB moduels, the computer then read two of the 2GB modules.  I am totally confused.  I have tested all of the modules and they all work in one configuration or another, and I've checked all of the slots and they work too.  Any suggestions on what I should try next?
    thanks

    Hi, this may or may not resolve the issue:
    MacBook Pro: How to remove or install memory:
    Additional notes     For best performance, fill both memory slots, installing an equal memory module in each slot.
         In Mac computers there is a hardware component known as the "RAM Equalizer". The function of this is impeded when the memory slots are filled with unequal memory quantities.

  • Help! Installed new RAM and now screen isn't coming on!

    Hi
    I'm in a bit of a mess and would be grateful for any help with this one:
    I have a Powerbook G3 500mhz Pismo that currently has a 512mb card in the top slot (Kingston PB100/512) that I installed about two years ago with no problems and an original 128mb in the bottom. At Christmas I bought another 512mb for the bottom slot – (Kingston KTA-PBG4/512 - This one is smaller than the first but it was the one reccomended by Kingston on their website for the Pismo).
    I have just got round to installing it after backing up my system and I have good instructions on how to do it (I have replaced the HD two years previous with no problems)
    Firstly I have to mention that just before I changed the RAM the laptop fell from a small stool (about 1.5feet high) onto carpet due to the unbalancing effect of taking out the battery/CD ROM. It landed on its edge where the power socket is. I immediately put it back together and turned it on to make sure it was ok - it came on fine and there were no problems visually, mechanically or otherwise, so I carried on with the installation.
    I installed the new 512mb card in the bottom slot and re-assembled but when I turned it on the screen remained black! From the computer itself, however, it sounded as if it had started up ok – there was the chime and the familiar sound of the hard drive at start up.
    To troubleshoot I removed the new RAM card and put back the old RAM as it was – this made no difference. I checked to see if the processor board was firmly in place or if I had dislodged any connectors by mistake within the area that I had worked but this made no difference. I also tried to re-set the parameter RAM and this made no difference.
    Because the laptop took a small knock prior to installation, I am not sure if that has caused something to come loose or damage of some kind but as I mentioned I did test it immediately and it worked, so it’s either a delayed reaction or the new RAM card has caused it. – (As mentioned there is a difference between the two 512 cards in both name and size but the smaller size of the newer one I assume just reflects advancement in technology and it was reccomended by Kingston!)
    If anybody has any advice on this I would be very grateful (and also, if anybody can point me in the direction of instructions on how to take the pismo apart to get to the connections to the screen that would be great – in case I have to do it)
    Many Thanks Barry
    PowerBook G3500mhz   Mac OS X (10.3.9)  

    SpottyFox,
    It sounds like you are properly seating the CPU card from your description, so I don't believe that is your problem. I am glad you checked the pins (I should have mentioned that as the next step if the reseating did not help). I cannot answer whether anything was damaged from your description of the pins; I have read where others have realigned bent pins with success so maybe your mileage will vary.
    Start up your Pismo, then shine a flashlight directly into the display; if you can see data being written to the display, just the backlight is refusing to light. If this is the case, check the inverter board connections. The inverter is under the clutch cover and powers the fluorescent backlight in the display. Enlarge the bottom picture in this link to see the inverter:
    http://www.ifixit.com/Guide/Mac/PowerBook-G3-Pismo/Inverter-Page-10-Inverter
    Check connections at each end of the inverter. Disassembly is not as extensive as this guide suggests. Support the back of the display, then remove the main battery, optical drive, lay the keyboard on its face on the palm rest, heat shield, and clutch cover...that's it.
    http://www.ifixit.com/Guide/6.0.0.html
    You might also connect the Pismo to an external display; failure here would suggest a more serious problem.

  • Installed 512mb RAM Memory and reads Empty!!!

    Please help i just installed a 512mb Ram Memory chip into DIMM1 and it is reading under system profiler MEMORY as Empty and if you click DIAGNOSTICS under system profiler it says "Power On Self-Test: Last Run:2/2/07 7:52 AM
    Result: Failed
    Failure Type: Memory
    Memory Slot: DIMM1/J31
    Please help for it was not doing this yesterday with the 256mb chip inside it was reading it perfect. I went for an upgrade and lol now i lost RAM. Please Help!!!!

    You might try taking the 512meg stick out and reseating it. Make sure it's all the way in.
    lenn

Maybe you are looking for