Installing new ssd

I An going to install a SSD in my mid 2009 MacBook pro, I have read some forums and lots say that I need to create a boot up usb of Yosemite. However I have also read some that say after installing the new SSD when I reboot I can do so through Internet reboit and using time machine back up. Just wondered if anyone else had done this?

Your MacBook Pro does not support Internet Recovery
Computers that can be upgraded to use OS X Internet Recovery - Apple Support
You can create a USB bootabe install device using
http://liondiskmaker.com/
or better yet, clone your existing HD to the SSD with the SSD installed in an extern enclosure or dock and test the cloned drive and then swap drives.
Re: Clone hard drive
http://nyacomputing.com/how-to-create-a-bootable-clone-of-your-mac-hard-drive/
Note that SUperDuper does not clone the Recovery partition while Carbon Copy Cloner does
BTW for the future, this is the Mac Pro desktop forum

Similar Messages

Installing new SSD in MacBook Pro

I have a MacBook Pro9,2, and I'm looking to replace the 500GB HDD with a 256GB SSD. Right now, my plan is to use Time Machine to put an image of the old drive on an external drive, then replace the drive and Time Machine the image to the new drive.
The current drive looks to have a layout of three partitions. Would Time Machine convert the new SSD to the same layout of three partitions? I'm thinking this is important because I do not have an install disc, and the recovery partition is one of the three partitions.

My macbook does not recognize it.
If not recognized by Disk Utility, then it cannot be repaired or initialized in its current condition.
If a new drive does not mount, it needs GUID partition Map and to be partitioned into one MacOS X Extended (journaled) partition with Disk Utility.
If it does not boot, it needs to have an appropriate version of Mac OS X installed on it.

Installing new SSD into older MacBook Pro and Organization Questions!!?

Hello,
I am about to pull the trigger on a new Samsung 840 Pro 512gb ssd for my older Macbook Pro 5,3 with 2.66 Intel Core 2 Duo.
I need some advice or at least point me in the direction of where I can read up to date info on properly executing the install of my new ssd.
A little background:
I have a Seagate 500gb external hdd that has many older pictures/videos on it as well as my "just about full" 320gb hdd on this computer that will be getting the 512ssd.
Any comments/suggestions a to how I can organize all of this and have it in one accessable place? (I was planning on installing the 512ssd on this computer, putting everything on the 512ssd and then wiping the external drive and using it as a backup periodically in case something went wrong with the new ssd I would be installing on this computer. Follow me? Any help/advice would be greatly appreciated.
I've been telling my wife that we NEED to replace this drive before we lose many of our important pictures and other items on it. We have used 319gb of which 45gb is still available. I am nervous as this hdd is about 6-7 years old?
The pictures/videos are the most important to us and do not want to lose them. Thanks, in advance, for your help!

How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu.
You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it.

Clean Install-New SSD

I've an early-2008 MacBook Pro and would like to do a clean Yosemite install on a new SSD before installing it in the machine.
My question is can I do the Yosemite install from the current drive in the notebook given it's already running Yosemite?
Many thanks in advance!

No. Here's what you need to do. Put the SSD into an external enclosure connected to the MBP.
Drive Partition and Format
1.Oopen Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button.
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall OS X: Select Reinstall OS X and click on the Continue button. Be sure to select the external SSD as the target for the install.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

HT201250 Time Machine backup then install new SSD HD + Pulling files from Time Machine from 'old' HD

Hi Guys,
I currently have a mid 2009 Macbook pro and I decided to upgrade the current HD in it to an Intel 330 SSD. Which might I add was a *gongshow*.
Anyways before I did the switch I used Time Machine to back up all my information, and to be double redundant I backed up the REALLY important information on a 8gig flashdrive.
The removal and reinstall of the new drive went smooth, and once lion was installed I did all the usual system updates.
Once it came to importing files from Time Machine is when my hassle started.
The last backup I did on Time Machine with the old HD still installed was at 10:00 this morning.
I had the new SSD up and running and a new backup of that created by 1:00 (3 hours later).
When I loaded up Time Machine to grab some files off of my 10:00 backup, it would not let me. The current backups have a Grey/Silver snapshot, and the backups from the OLD HD were blacked out and I could not click on them. What can I do to get these files off my Time Machine from the old HD?
Thanks

Quick followup question,
If I do a migrate with the time machine will the system be updated to the version I had when I made it (10.8.6 I think) or will I have to do the system updates afterwards. If so, will that cause any clashes when applying the time machine migration?

HDD problem after installing new SSD

i bought a Kingstone SSD 60GB, and procced to a clean installation in my HP DV7-1020us laptop wich i love. All nice and good... i got out the HDD, install SSD in previously used HDD slot, install windows 7 on SSD partition, put the HDD in second hard drive bay that was it.
The problem is... after couples shuts down of my laptop (still working good), one time when i started, my laptop spent like 10-15 mins trying to start up the windows , ( i could hear my old HDD working hard) and after that i wanted to reach my HDD but i couldnt... i double click on the partition i want to open and my HDD starts working hard hard and in the end it says that i need to format it so i can acces it. My hdd haves 3 partitions... i runned disk checks and repairs and still doing the same. I finally formated all of it... all of my HDD partitions including the Recovery partition. My HDD works fine until i shut down my laptop for the first time after formating, then another 10-15 mins to start up and shut down the windows. Also if i connect my hdd via USB everything is fine ( if i previously format the HDD and connect it via USB). But if i move it back into my laptop in my sata slot things goes bad again. Also if i wait 10 mins at start up, get the hdd out and connect it via usb it still runs very ver very slow, and one partition asks me for formating. So i'm thinking that my second sata slot connection does something bad to my hdd.
I'm thinking that my second sata slot haves some problems... what should i do? I dont like my HDD working on my USB, it's a laptop, everything has to be integrated.
Oh and if i move my ssd from first sata slot to my second one, it says "please insert bootable device...."
Thank you, if u need more information please ask me

Hi mykey651,
Thank you for your query, I will do my utmost to assist you.
I grasp you have installed a SSD drive as the main drive and the original drive as a secondary. All works well until you reboot and then it is unable to locate the SSD.
Here is a link to HP Notebook Hard Drives & Solid State Drives Identifying, Preventing, Diagnosing and Recovering from...
If that has not helped, I suggest you go out to the bios and restore the defaults. This will reset the system and make it scan for installed hardware. This should help it to find the new SSD as the boot drive.
Here are two more documents that may be of help.
About Solid State Hard Drives
How to Install an SSD (Solid State Drive
Hope this helps and have a great weekend.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Instability after installing new SSD

I have recently purchased a couple of new SSD's. Intel 530 and Samsung 840 evo. I have been having this problem with both drives when installed separately. This is on a clean install of Windows 8.1
My Hardware:
Gigabyte ga-890gpa-ud3h
AMD Phenom II 955 3.4ghz
Nvidia GTX 560
8GB RAM
Samsung 840 EVO 250GB
WD 1TB HDD
I have been having crashes with programs and plugins for browsers. Here are a couple of logs that I have been getting in event viewer.
Faulting application name: plugin-container.exe, version: 33.0.2.5413, time stamp: 0x544ef530
Faulting module name: mozalloc.dll, version: 33.0.2.5413, time stamp: 0x544ed089
Exception code: 0x80000003
Fault offset: 0x00001425
Faulting process id: 0xf98
Faulting application start time: 0x01cff71d2e5c06e7
Faulting application path: C:\Program Files (x86)\Mozilla Firefox\plugin-container.exe
Faulting module path: C:\Program Files (x86)\Mozilla Firefox\mozalloc.dll
Report Id: a06bcc1f-6312-11e4-8262-1c6f653f0017
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: Survivors.exe, version: 0.0.0.0, time stamp: 0x53fe5b40
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x6393c2a0
Faulting process id: 0xc2c
Faulting application start time: 0x01cff71cbe604f05
Faulting application path: C:\SteamLibrary\steamapps\common\Infectonator Survivors\Survivors.exe
Faulting module path: unknown
Report Id: d7c980bd-6311-11e4-8262-1c6f653f0017
Faulting package full name:
Faulting package-relative application ID:
Any help would be appreciated.

Yes, I have updated the firmware, I'm also running in AHCI mode. I believe I'm up to date on all my drivers and I ran memtest to check my RAM and everything turned out OK. I don't know what else to check. Both SSD's couldn't possibly
be bad.
Here is a collection of DUMP files that I have gotten.
https://onedrive.live.com/redir?resid=BEA0CC0EB2E20D70%21747
I believe they all point to ntoskrnl?

A720 Install new SSD drive

Hi,
I'm currently try to change my 1TB hard drive to a new 128Go SSD Drive.
I have try with 2 different drive but unfortunately i'm not able to do the upgrade. The first SSD are not visible from the BIOS and the other one I can see it from the bios but when trying to do a clean install... booting from the DVD, after the files seems to be loaded, I came up with a blank screen... the hard drive led on the monitor stay's on (not flashing) and nothing else happen.
Do you know first if it's possible to change the 1TB HD to a sata SSD drive (not mSata) and if the answer is yes... how to do it ?
Thank's
Dominic

hi ferldom,
Thanks for Posting!
Here is a thread of users who installed the SSD.
http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/Installing-mSATA-drive-in-IdeaCentre-A7...
Can you try Changing these settings checklist in your BIOS Before you do a new installation.
Some of the settings may not be seen inside your BIOS but for those that's present change it like on this list
Under Exit TAB
OS Optimization
OS Optimized
For the two options above: Should be set as Disabled or Other OS
Under Boot Tab / Start up Tab
Boot Mode Should be set to Legacy
Boot Priority Should be set to Legacy First
UEFI Boot should be set to Disabled
Quick Boot should be Disabled
StartUp device Menu prompt should be Disabled2
Quick Boot Should be Disabled
USB Boot should be Enabled
Secure boot Should be Disabled
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Late 2008 mbp - installed new ssd - trying to boot from snow leopard iso on flash drive - says 'cannot install mac os on this computer'

Hello -
I just installed a new M500 Crucial ssd in my late 2008 mbp - everything was working fine on old hard drive (running snow leopard) but was getting slow and wanted to upgrade - i lost my snow leopard disk when moving from hawaii so i found an iso online - using a flash drive i partitioned the disk and made the bootable image on flash drive - formatted as extended/journaled - switched out the hard drives - plugged in the flash drive - started the comp - held option - install begins to boot - choose language - all is fine - choose english - next step window pops up saying 'cannot install os on this computer' - click on utility but all options are greyed out - disk util is greyed out - only options it gives is to start from backup or restart - real confused here - all help appreciated - thanks in advance and happy new year!

Snow Leopard comes in discs only. The USB drive may be a counterfeit and/or corrupt. There are two options for you:
Get replacement original OSX installation disks from Apple customer service. Have your MBP serial number ready and there is a charge.
Or two, purchase a Snow Leopard disk from the Apple online store:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao.

Installed new SSD. How do I get my files back from Time Machine?

Hi all, if you take the time to read my issue, thanks a lot. I appreciate any help you can offer, and sorry if anything is unclear...
The 1tb drive eventually failed on my 2009 27", quad core i7 imac. I had USB backup using time machine to an external 2 tb disk.
Repair guy took my mac to his shop, and installed a new samsung 1tb SSD.
He had trouble reinstalling from my time machine backup - so he's just installing Yosemite (I was using 10.8.x?) and giving it back to me with a fresh install of Yosemite.
When he tried to use time machine to restore my system to how it was, he started the process, and it said that it would take 13 hours, so he left it overnight.
When he returned, he found a white screen with a frozen mouse pointer. He did a hard reboot, and then could not access the drive at all - the system would not allow him to read the drive and he had to take the drive out, reformat from another mac, and then install Yosemite again.
Now he has suggested that I simply drag and drop all my folders from the USB time machine backup into my computer, and seems to think this will get things back to how they were. I'm not sure that it works like that though...I'd expect certain applications need to be installed, settings changed, permissions granted, passwords entered...that kind of thing.
Now I have a choice - whether to
A) reinstall my applications one at a time, and then copy the data from my backup drive.
B) manually drag and drop all the files from the most recent backup folder into the "computer" folder. (This was his suggestion)
C) attempt some kind of migration using the Migration assistant. (I believe this is what the guy tried- he started it off, it said "13 hours remaining) he left it running overnight, and came back to a static white screen with frozen mouse, he powered down, then when he switched it back on, the screen did not load any OS (not sure whether it had booted into some kind of BIOS, but he said it was so unresponsive that he had to remove the drive and reformat it from another computer).
D) Try some other application for intelligently restoring my apps and data from the Time Machine backup.
To be honest, my main concern is screwing things up badly! I'm veering towards reinstalling my apps, even if it means fixing up preference settings and typing in codes etc... I would rather take a slow and steady approach rather than a "risk having to take it back to the shop/take it apart" approach.
Also, is migration different from restoring from time-machine?
Perhaps you could advise me? Many thanks

Restart the computer and hold the Command & R keys.
Thanks - I didn't know how to do that!
I did that, and it went through the steps for restoring from the time machine backup. I didn't click on "restore" just yet... My concern is that when the guy in the shop tried that, it resulted in the serious failure that required the drive to be removed and formatted from another computer.
I'm wondering what might have caused that - is it possible that the external drive had a failure, or (more likely) that the drive caddy it sits in briefly lost power or something?
Also, can you tell me if simply drag-dropping the files from the time-machine backup would result in everything returning to its initial state? Or is that (as I suspect) a bad idea?
Right now I have a fresh Yosemite install which works. I'd rather have that, and slowly restore my files and apps manually than risk getting the same result as the guy in the shop. Do you think that restoring from the restore partition is worth trying again?

Installed new SSD boot drive, Time Machine won't backup

I installed a new 240 GB SSD boot drive (cloned using Super Duper) in my Mac Pro and want to use it as my startup disk. When I boot up using the new 240 SSD drive and try to start Time Machine to back it up onto a 500GB external drive it tells me it failed because the estimated backup size is over 2 TB. I suspect that Time Machine still has the last backup from my old boot drive, which was a 3TB hard drive. I go to Options and tell it not to back up any of my other hard drives but that doesn't help. So now what? How can I get rid of the last backup, which was from my 3 TB hard drive, so that I can backup a 240 GB SSD on a 500 GB external drive? Or is it another problem? Help!! Thanks!!

Problem solved, wasn't using Options/Exclude items properly.

How to increase disk read and write speed after installing new SSD (2009 Macbook Pro)? Why not as fast as advertised?

Hi everyone,
I just installed a Crucial MX10512 GB SSD into my 2009 Macbook Pro. It's definitely much faster, but the read and write disk speed is around 200 Mb/s for both versus the 300-500 Mb/s that the SSD advertised. Any ideas as to why? And is there anything I can do to make it faster? Before I installed it, it was between 80-90 Mb/s.
Specs:
- currently have about 460 of 511 GB of storage available
- am using 2GB of memory
- running on 10.10.2 Yosemite
Thanks!

nataliemint wrote:
Drew, forgive me for being so computer-incompetent but how would I boot from another OS? And shouldn't I be checking the read speeds on my current OS (Yosemite) anyways because I want to know how the SSD is performing on the OS I use? And finally, what kind of resources would it be using that would be slowing down my SSD?
Sorry for all the questions - I'm not a Macbook wiz by any means!
You could make a clone of your internal OS onto an external disk. Hopefully you already have a backup of some form
A clone is a full copy, so you can boot from it. It makes a good backup as well as being useful to test things like this.
Carbon Copy Cloner will make one or you can use Disk Utility to 'restore' your OS from the internal disk to an external one.
Ideally the external disk is a fast disk with a fast 'interface' like Thunderbolt, Firewire 800 or USB3. USB2 can work, but it is slow & may effect the test.
You connect the clone, hold alt at startup & select the external disk in the 'boot manager'. When the Mac is finished booting run the speed tester.
Maybe this one…
https://itunes.apple.com/gb/app/blackmagic-disk-speed-test/id425264550
Test the internal & compare to the previous tests
A running OS will do the following on it's boot disk…
Write/ read cache files from running apps
Write/ read memory to disk if memory is running low
Index new files if content is changing or being updated
Copy files for backing up (Time Machine or any other scheduled tasks)
Networking can also trigger read/ write on the disk too.
You may not have much activity that effects a disk speed test, but you can't really be sure unless that disk is not being used for other tasks.
Disk testing is an art & science in itself, see this if you want to get an idea …
http://macperformanceguide.com/topics/topic-Storage.html
Simply knowing that it's about twice the speed would be enough to cheer me up

Installing Mac OS X Snow Leopard after installing new SSD

I am having trouble when partitioning the drive (SanDisk Ultra II SSD installed in MacBook Pro 2012) before installing snow leopard as it seems to have stalled half way through. I don't want to quit if it is going to make the new hard drive 'non-operational' as the dialogue box is saying...ideas anyone?

I've now tried starting in internet recovery mode (command option R) as well as trying to start from the installation disk (holding down option on start up then clicking on the disk icon) but have encountered problems with both options.
command option R:
Get to the point of partitioning the new hard drive, it looks like it's going to work and then gets stuck at 'mounting disk'
option (original disk install)
starts up fine, but then gets stuck on the apple grey screen.
I'm in real need of assistance at this point as I'm out of ideas!

Kernel panics increasing after installing new SSD with Mavericks on 2010 MBP

I'm having more frequent random reboots on my recently upgraded MacBook Pro. (mid 2010, Processor: 2.66 Ghz Intel Core i7, Memory: 8 GB 1067 MHz DDR3, external monitor: LG Flatron IPS235)
The almost 5yr old original hard drive started making the tell-tell scratching noises and the MBP would randomly reboot 1 or 2 times a week.
I had the HD replaced with a new 480GB SSD drive by certified pros. I mentioned the spontaneous reboots to the pro and he told me that it was probably due to the faulty HD.
The new drive came with 10.9 already installed, whereas I had been running 10.6.8 in order to keep a lot of the older software I relied on.
So accepting the loss of quite a few applications, I proceeded to install just the apps I needed, as needed them. Then the random reboots started happening, a lot more often, up to 2x a day, browsing the web or just checking email. The one thing I could do to trigger the crash, ironically enough, was by scrolling on the new iMac 5K landing page- halfway through "zooming out" (scrolling) in the waterfall image would shut 'er down.
Could it be the RAM? VRAM? The monitor? Updating my beloved MBP cost $575 (and several apps), so I'd like to go back to the same pro with information that could save me $$ on troubleshooting. I'm afraid to install the 10.9.x updates for fear it will bring my MBP to it's knees.
Thanks,
Jesse

Here is the report in it's entirety:
Anonymous UUID:       A76B10E3-713D-D42A-0EDE-151A2D84A809
Fri Dec 12 00:36:16 2014
panic(cpu 0 caller 0xffffff7f88159fac): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80fdce9000 0x0a5480a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80f63bb140 : 0xffffff8005e22f69
0xffffff80f63bb1c0 : 0xffffff7f88159fac
0xffffff80f63bb290 : 0xffffff7f8681c53d
0xffffff80f63bb350 : 0xffffff7f868e8d9e
0xffffff80f63bb390 : 0xffffff7f868e8dfc
0xffffff80f63bb400 : 0xffffff7f86b6d5be
0xffffff80f63bb530 : 0xffffff7f8690cd41
0xffffff80f63bb550 : 0xffffff7f8682308d
0xffffff80f63bb600 : 0xffffff7f86820bae
0xffffff80f63bb800 : 0xffffff7f86821af6
0xffffff80f63bb8e0 : 0xffffff7f8778fba2
0xffffff80f63bb920 : 0xffffff7f8779f55f
0xffffff80f63bb940 : 0xffffff7f877cd51b
0xffffff80f63bb980 : 0xffffff7f877cd57b
0xffffff80f63bb9c0 : 0xffffff7f877a4ff5
0xffffff80f63bba10 : 0xffffff7f87770d3e
0xffffff80f63bbaa0 : 0xffffff7f8776ccc7
0xffffff80f63bbad0 : 0xffffff7f8776a816
0xffffff80f63bbb00 : 0xffffff80062cb873
0xffffff80f63bbb90 : 0xffffff80062cd76f
0xffffff80f63bbbf0 : 0xffffff80062cb28f
0xffffff80f63bbd40 : 0xffffff8005eb6008
0xffffff80f63bbe50 : 0xffffff8005e26bb1
0xffffff80f63bbe80 : 0xffffff8005e139b5
0xffffff80f63bbef0 : 0xffffff8005e1e003
0xffffff80f63bbf70 : 0xffffff8005ec921d
0xffffff80f63bbfb0 : 0xffffff8005ef3e26
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7f8814c000->0xffffff7f8815efff
            dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7f88144000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f86724000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f864ba000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f86778000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f88147000
         com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f867cb000->0xffffff7f86a3afff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f864ba000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f867bb000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f86778000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.1.8)[3666E0FC-87C7-3329-BD8C-2F1ADE D100A4]@0xffffff7f86a45000->0xffffff7f86cf1fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f867cb000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f864ba000
         com.apple.GeForceTesla(8.1.8)[67BAF872-A238-3787-AB74-22297A51FE8F]@0xffffff7f8 774f000->0xffffff7f87819fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f864ba000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f867bb000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f86778000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f867cb000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000005c00000
Kernel text base: 0xffffff8005e00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 92185784039799
last loaded kext at 90285561775752: com.apple.filesystems.afpfs 11.0 (addr 0xffffff7f8827a000, size 348160)
last unloaded kext at 74988545819198: com.apple.driver.AppleUSBCDC 4.2.1b2 (addr 0xffffff7f8825c000, size 16384)
loaded kexts:
com.apple.filesystems.afpfs 11.0
com.apple.nke.asp-tcp 8.0.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AGPM 100.14.11
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleIntelHDGraphics 8.1.8
com.apple.driver.AppleIntelHDGraphicsFB 8.1.8
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMuxControl 3.4.12
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.security.SecureRemotePassword 1.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.IOSurface 91
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1

Slow Boot Times after installing new SSD and Lion

Can anyone please help interpret why I'm having slow boot times? I have copied my console printout during the boot and it seems to be doing a repetitive action while booting.
Thanks
13-01-04 2:50:24.000 AM bootlog: BOOT_TIME 1357293024 0
13-01-04 2:50:25.000 AM kernel: Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
13-01-04 2:50:25.000 AM kernel: vm_page_bootstrap: 942160 free pages and 32688 wired pages
13-01-04 2:50:25.000 AM kernel: kext submap [0xffffff7f80736000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000736000]
13-01-04 2:50:25.000 AM kernel: zone leak detection enabled
13-01-04 2:50:25.000 AM kernel: standard timeslicing quantum is 10000 us
13-01-04 2:50:25.000 AM kernel: mig_table_max_displ = 73
13-01-04 2:50:25.000 AM kernel: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
13-01-04 2:50:25.000 AM kernel: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for TMSafetyNet
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for Sandbox
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for Quarantine
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Quarantine policy (Quarantine)
13-01-04 2:50:25.000 AM kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
13-01-04 2:50:25.000 AM kernel: The Regents of the University of California. All rights reserved.
13-01-04 2:50:25.000 AM kernel: MAC Framework successfully initialized
13-01-04 2:50:25.000 AM kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
13-01-04 2:50:25.000 AM kernel: IOAPIC: Version 0x11 Vectors 64:87
13-01-04 2:50:25.000 AM kernel: ACPI: System State [S0 S3 S4 S5]
13-01-04 2:50:25.000 AM kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
13-01-04 2:50:25.000 AM kernel: [ PCI configuration begin ]
13-01-04 2:50:25.000 AM kernel: console relocated to 0xf10010000
13-01-04 2:50:25.000 AM kernel: PCI configuration changed (bridge=1 device=1 cardbus=0)
13-01-04 2:50:25.000 AM kernel: [ PCI configuration end, bridges 5 devices 24 ]
13-01-04 2:50:25.000 AM kernel: AppleIntelCPUPowerManagement: (built 16:32:09 Aug 23 2012) initialization complete
13-01-04 2:50:25.000 AM kernel: mbinit: done [64 MB total pool size, (42/21) split]
13-01-04 2:50:25.000 AM kernel: Pthread support ABORTS when sync kernel primitives misused
13-01-04 2:50:25.000 AM kernel: TBIOBlockStorageDriver: super::probe failed
13-01-04 2:50:25.000 AM kernel: TBIOBlockStorageDriver: super::probe failed
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeZlib kmod start
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeDataless kmod start
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
13-01-04 2:50:25.000 AM kernel: AppleIntelCPUPowerManagementClient: ready
13-01-04 2:50:25.000 AM kernel: BTCOEXIST off
13-01-04 2:50:25.000 AM kernel: wl0: Broadcom BCM432b 802.11 Wireless Controller
13-01-04 2:50:25.000 AM kernel: 5.106.198.19
13-01-04 2:50:25.000 AM kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID e80688fffec0e9d0; max speed s800.
13-01-04 2:50:25.000 AM kernel: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
13-01-04 2:50:25.000 AM kernel: com_seagate_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
13-01-04 2:50:25.000 AM kernel: com_maxtor_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
13-01-04 2:50:25.000 AM kernel: rooting via boot-uuid from /chosen: 1052015E-B101-3046-8932-5C6B1E6A7995
13-01-04 2:50:25.000 AM kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
13-01-04 2:50:25.000 AM kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T1@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/M4-CT256M4SSD2 Media/IOGUIDPartitionScheme/Imipenem (SSD)@2
13-01-04 2:50:25.000 AM kernel: BSD root: disk0s2, major 14, minor 2
13-01-04 2:50:25.000 AM kernel: Kernel is LP64
13-01-04 2:50:25.000 AM kernel: [IOBluetoothHCIController::setConfigState] calling registerService
13-01-04 2:50:25.133 AM com.apple.launchd: *** launchd[1] has started up. ***
13-01-04 2:50:25.491 AM com.apple.launchd: (com.apple.powerd) Unknown value for key POSIXSpawnType: Interactive
13-01-04 2:50:25.491 AM com.apple.launchd: (com.apple.sandboxd) Unknown value for key POSIXSpawnType: Interactive
13-01-04 2:50:25.987 AM UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
13-01-04 2:50:25.990 AM UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:25.992 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.992 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:26.000 AM kernel: BCM5701Enet: Ethernet address c4:2c:03:01:22:c1
13-01-04 2:50:26.000 AM kernel: AirPort_Brcm4331: Ethernet address f8:1e:df:eb:b4:37
13-01-04 2:50:26.000 AM kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
13-01-04 2:50:26.000 AM kernel: IO80211Interface::efiNVRAMPublished():
13-01-04 2:50:27.025 AM airportd: _processDLILEvent: en1 attached (down)
13-01-04 2:50:27.274 AM com.apple.SecurityServer: Session 100000 created
13-01-04 2:50:27.000 AM kernel: in func createVirtualInterface ifRole = 1
13-01-04 2:50:27.000 AM kernel: Created virtif 0xffffff800bdffa00 p2p0
13-01-04 2:50:27.349 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:27.607 AM com.apple.SecurityServer: Entering service
13-01-04 2:50:27.749 AM UserEventAgent: ServermgrdRegistration cannot load config data
13-01-04 2:50:27.779 AM UserEventAgent: get_backup_share_points no AFP
13-01-04 2:50:28.000 AM kernel: NVDANV50HAL loaded and registered.
13-01-04 2:50:28.000 AM kernel: Previous Shutdown Cause: 5
13-01-04 2:50:28.000 AM kernel: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
13-01-04 2:50:28.000 AM kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
13-01-04 2:50:28.332 AM com.apple.launchd: (com.sec.faxdb[73]) open("/Library/Logs/Samsung/MacFax/FaxDB.log", ...): No such file or directory
13-01-04 2:50:28.333 AM com.apple.launchd: (com.sec.faxdb[73]) open("/Library/Logs/Samsung/MacFax/FaxDB.log", ...): No such file or directory
13-01-04 2:50:28.347 AM com.apple.pfctl: No ALTQ support in kernel
13-01-04 2:50:28.347 AM com.apple.pfctl: ALTQ related functions disabled
13-01-04 2:50:28.363 AM com.apple.launchd: (com.sec.faxdb[73]) posix_spawn("/Library/Printers/Samsung/Fax/FaxDB/faxdbd", ...): No such file or directory
13-01-04 2:50:28.385 AM com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
13-01-04 2:50:28.385 AM com.apple.launchd: (com.sec.faxdb[73]) Exited with code: 1
13-01-04 2:50:28.385 AM com.apple.launchd: (com.sec.faxdb) Throttling respawn: Will start in 300 seconds
13-01-04 2:50:28.606 AM mDNSResponder: mDNSResponder mDNSResponder-320.16 (Jul 19 2012 21:07:07) starting OSXVers 11
13-01-04 2:50:28.704 AM com.apple.revisiond: 2013-01-04 02:50 revisiond[52] (CarbonCore.framework) implementation_callback_rpc: ERROR: CFDictionaryGetValue(FSEvents_streamDict, cfPortNumber) => NULL
13-01-04 2:50:28.705 AM com.apple.usbmuxd: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
13-01-04 2:50:28.814 AM configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
13-01-04 2:50:28.814 AM configd: DHCP en1: INIT-REBOOT transmit failed
13-01-04 2:50:28.837 AM systemkeychain: done file: /var/run/systemkeychaincheck.done
13-01-04 2:50:28.880 AM mds: (Normal) FMW: FMW 0 0
13-01-04 2:50:28.938 AM mDNSResponder: D2D_IPC: Loaded
13-01-04 2:50:28.938 AM mDNSResponder: D2DInitialize succeeded
13-01-04 2:50:28.990 AM configd: setting hostname to "Karr-Hong-Lees-MacBook-Pro.local"
13-01-04 2:50:29.000 AM kernel: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
13-01-04 2:50:29.000 AM kernel: DSMOS has arrived
13-01-04 2:50:29.000 AM kernel: macx_swapon SUCCESS
13-01-04 2:50:29.031 AM configd: network configuration changed.
13-01-04 2:50:29.984 AM loginwindow: Login Window Application Started
13-01-04 2:50:30.091 AM com.apple.launchd: (com.sec.faxdb) Throttling respawn: Will start in 299 seconds
13-01-04 2:50:30.142 AM netbiosd: Unable to start NetBIOS name service:
13-01-04 2:50:31.000 AM loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
13-01-04 2:50:31.000 AM kernel: en1: 802.11d country code set to 'US'.
13-01-04 2:50:31.000 AM kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
13-01-04 2:50:31.282 AM loginwindow:
O3REQUIRE FAILED: ret == 0
   - file: /SourceCache/BezelServices/BezelServices-232.3/Utilities/Utilities.c
   - line: 91
13-01-04 2:50:31.282 AM loginwindow: Failed to lookup Bezel UI Server port: Bootstrap Unknown Service.
13-01-04 2:50:31.315 AM com.apple.SecurityServer: Session 100004 created
13-01-04 2:50:31.317 AM loginwindow: Login Window Started Security Agent
13-01-04 2:50:31.347 AM com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
13-01-04 2:50:31.542 AM SecurityAgent: Echo enabled
13-01-04 2:50:31.542 AM SecurityAgent: Echo enabled
13-01-04 2:50:31.574 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:31.574 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:31.575 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
13-01-04 2:50:31.575 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
13-01-04 2:50:32.000 AM kernel: MacAuthEvent en1   Auth result for: a8:39:44:57:2c:50 MAC AUTH succeeded
13-01-04 2:50:32.000 AM kernel: wlEvent: en1 en1 Link UP virtIf = 0
13-01-04 2:50:32.000 AM kernel: AirPort: Link Up on en1
13-01-04 2:50:32.000 AM kernel: en1: BSSID changed to a8:39:44:57:2c:50
13-01-04 2:50:32.530 AM airportd: _doAutoJoin: Already associated to “TELUS3939”. Bailing on auto-join.
13-01-04 2:50:33.000 AM kernel: AirPort: RSN handshake complete on en1
13-01-04 2:50:34.579 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:34.579 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:34.579 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 9)
13-01-04 2:50:34.579 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 9)
13-01-04 2:50:35.093 AM configd: network configuration changed.
13-01-04 2:50:35.113 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
13-01-04 2:50:35.114 AM UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
13-01-04 2:50:35.114 AM UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on TELUS3939 because it is protected and not on the exception list
13-01-04 2:50:35.116 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
13-01-04 2:50:35.118 AM configd: network configuration changed.
13-01-04 2:50:35.991 AM ntpd: proto: precision = 1.000 usec
13-01-04 2:50:37.270 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:37.271 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:37.271 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 8)
13-01-04 2:50:37.271 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 8)
13-01-04 2:50:40.276 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:40.276 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:40.276 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 7)
13-01-04 2:50:40.276 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 7)
13-01-04 2:50:43.281 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:43.281 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:43.281 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 6)
13-01-04 2:50:43.282 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 6)
13-01-04 2:50:46.286 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:46.286 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:46.286 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 5)
13-01-04 2:50:46.286 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 5)
13-01-04 2:50:49.291 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:49.291 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:49.291 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 4)
13-01-04 2:50:49.291 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 4)
13-01-04 2:50:52.296 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:52.296 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:52.296 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 3)
13-01-04 2:50:52.296 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 3)
13-01-04 2:50:55.301 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:55.301 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:55.301 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 2)
13-01-04 2:50:55.301 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 2)
13-01-04 2:50:58.307 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:58.307 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:58.307 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
13-01-04 2:50:58.307 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)

Fixed it!
Just changed my settings to auto log on.
Hooray!

Installing new ssd

Similar Messages

Maybe you are looking for