Installing NI-DAQmx 9.7.0 Application Development Support
Hello,
I am currently trying to install Labview 2009 (my former copy was lost when my former computer's motherboard overheated). The installation has gone fine, I think, and I am able to create new projects etc.
When I downloaded NI-DAQmx 9.7 (the full installer), I seem to be unable to install several pieces of software - please see the error-file attached. I am not worried about the NI I/O Trace 3.0.2, NI MAX 5.4, or NI Network Browser 5.4.0, as I believe the higher editions I have are backwards-compatible.
With the NI-DAQmx 9.7.0 Application Development Support however, I cannot install this due to incompatible products. Do you know what kind of products this error is referring to? I am at a loss, as I also do not know what the symbol shown in screenshot means (I've accessed this window through trying a custom installation, but I cannot change to a tick/cross).
Thank you in advance!
Carl
Solved!
Go to Solution.
Attachments:
error-file.pdf 19 KB
Screenshot.png 184 KB
Hi Carl,
Is it possible you are able to post your MAX System Information, so we can see in depth if there are any conflicts on your system. DAQmx 9.7.0 is supported by LabVIEW 2009, so I am unsure of what the exact issue is at this time.
In NI-MAX, if you could: Right click on My System >> Create Report >> Select My System, and select Simple Report. Generate the report, then please upload it so I can see.
Best Wishes,
James Kent
James Kent | Applications Engineer | National Instruments UK & Ireland
w: uk.ni.com | ireland.ni.com
Similar Messages
-
Kdcom.dll error after installing NI-DAQmx 7.5/8.5 on Windows XP Pro
We are trying to switch from including a fully computer drawer in our product to just using a SBC (Single Board Computer). In the past we have used Pentium 4 boards with the NI-DAQmx 7.5 suite and had no problem. The current board we are testing useds the Intel 855GME GMCH chipset with a 1.0 GHz Celeron M Processor. After installing the software and I am prompted to restart, and upon restart a notorious Windows blue screen of death comes up saying that there was an error error with kdcom.dll. (exact error below)
A
problem has been detected and windows has been shut down to prevent
damage to your computer.Stop:
0x0000007E (0xc0000010,0xFAFF2A0,0xF7A16344,0xF7A16040)
kdcom.dll
– Address F7AFF2A0 base at F7AFF000, Datestamp 3b7d8346
I have installed both DAQmx 7.5 and 8.5 getting the same results with both. I have tried to disable all of the onboard functionalities of the board (video, ethernet, sound) and still I have gotten this same error. (Note: I have done default installs as well as full studio installs)
Has anybody seen this error before and knows what is causing/how to stop it?
Is it quite possible that the NI-DAQmx 7.5/8.5 software/drivers are just not compatible with this SBC?
Here is a link to info/specs about board that I am having trouble with: WinSystems EBC-855
ThanksHi,
I'm not sure that this is a DAQmx related issue. A Google search reveals that kdcom.dll is a Windows dll - what leads you to believe that DAQmx is involved? I'm not a Windows supporter, but there do appear to be a few discussions in that search with issues very similar to yours - did you try replacing that dll? As long as your computer is an x86 architecture and/or on a supported OS, DAQmx should be able to run on that machine. You may want to hit up WinSystem's support to see what they have to say from the computer side.
Hope this helps, please don't hesitate to post back if DAQmx is the culprit or if you have any additional questions.
Cheers,
Andrew S
National Instruments
Getting Started with NI-DAQmx
Measurement Fundamentals -
Installing NI-DAQmx in Windows XP x64
hello,
I've been trying to install NI-DAQmx in a computer with Windows XP x64. I've read some of the discussion news about this issue, yet I could not find any post that has a solution to it. May I know what should I do to get NI-DAQmx to be installed in OS XP x64? Thank you very much for your time and help.If you have read some of the posts, then this one should explain it all. There is no driver for XP 64 nor do I think it's likely that there ever will be one. I haven't even seen much support for this OS from Microsoft. It's all been about Vista.
-
Cannot install NI-DAQmx on Dell Optiplex 3010
I am trying to install NI Drivers on Dell Optiplex 3010 machines. We have many of these machines - our IT department appears to have stocked up on them. During installation of the NI Drivers the installation will simply stop progressing when it hits some % complete (the actual % varies from one installation attempt to the next). There are no error messages, no timeouts, etc. - it will simply stay at that point and never progress or stop until the machine is rebooted.
I have traced it down to the NI-DAQmx drivers. I can install all of the other drivers as long as I don't install NI-DAQmx (or anything that depends on it). Even just trying to install NI-DAQmx without other drivers that depend on it produces the same issue. I have not had any driver installation issues on other Win7 machines that are not Optiplex 3010s.
Anybody else see this or have any ideas on how to resolve it?
Thanks in advance,
DevinHello dbentley!
Some thoughts:
Sometimes, the windows installers can encounter problems during the installation progress, due to the Windows Update manager. Have you tried installing the required updates on your Windows machine (I'm assuming you are using Windows 7), before installing the NI Drivers?
Are you running the installers from the network? Have you confirmed that there are no network issues (e.g. connection drops) to that machine?
Best regards!
- Johannes -
Hi guys--
Basically, I need to simulate a cRIO device without yet having the hardware on hand, like this:
How to Simulate FPGA Hardware Targets Using the Project Explorer with LabVIEW
Instead, I only get the options shown in the attachment "Add Target Options.jpg". I assume this is because of missing drivers, which I assume is due some mistake I made during a recent fresh install of LV. The install went like this: I downloaded (not disks) and installed the following (in this order, latest versions all around):
(1) LabView Development System
(2) Real-Time Module
(3) FPGA Module
(4) NI-RIO (install prompted by previous install)
(5) DAQmx
At the end of (1) and (2), I got the screen shown in the second attachment ("Drivers Install Message.jpg"), but could not get it to recognize the "NI Device Drivers" folder (which I also downloaded), or any of its sub-folders.
I feel I'm missing some obvious option for loading up the necessary drivers after the install, but can't seem to find reference to it in the forums. Could anyone give me a little push in the right direction?
Thanks a bunch, and have a great day.
Solved!
Go to Solution.
Attachments:
Add Target Options.jpg 57 KB
Drivers Install Message.jpg 47 KBMichael--
Thanks for your reply. In answer to your questions, the DAQmx install seemed to go smoothly, and I believe this is evidenced by available my MAX Simulated Device options (shown in the attachment to this post). My best guess (could be wrong here) is that I cannot simulate a cRIO device because I was unable to install the drivers after the Real-Time Module installation (as described in my first post).
The source path selection screen for drivers ("Drivers Install Message" attachment in first post) told me "...you can install NI device drivers later.", and since it would not recognize anything in the NI Device Drivers folder I downloaded, I clicked on "Later".
I could narrow the issue down a bit if I could now install those drivers, but this is my first time installing without disks, and I can't figure out how to properly install the drivers from the folder I have sitting on my hard drive. Have I overlooked instructions somewhere on this procedure?
Thanks a bunch for your help.
Attachments:
MAX Device Simulation Options.jpg 52 KB -
I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!
Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or package vendor." If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now? What is my "package vendor"? And what is it I need to do to fix this? The message is unclear. Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load. Now I have no itunes on my computer and unable to sync my iphone. Help!
Thanks - RickHi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
I've tried multiple times, cleaned temp files, updated windows and still cannot complete the install. I've noticed other problems with 10.5 and windows though it downloaded into my other PC fine. This is a clean install, iTunes has never been on this PC before. Any help is appreciated.
Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Hi,
I just try to install the setup download from apple website for iTune and iCloud.
During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
Anyone can help on this??????
Thanks.
JustinI have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.
-
I am trying to update my iphone 4, but in order to do that I need to update itunes. I am unable to do this, or update quicktime. I get an error message that says
"A program required for this install to complete could not be run. Contact your support personnel or package vendor." I have a dell running windows 7Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I accidentally removed the Bonjour service from my system a few weeks ago, but my iTunes continued to work. Now I have no iTunes and I don't know how to fix it. SOMEONE PLEASE HELP!!!!
a colleague of mine suffers from the same problem. did a quick look on the apple support pages. found many topics covering the same problem.
also saw 1 marked as correct answer... (just browse the discussion pages before you ask, this answer appearantly was sitting there from oct. 14...)
(i'm not on windows, so i can't test...)
good luck!
j.
Correct Answer by Peter Lepere on Oct 14, 2011 3:07 AM
Hi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
What does this mean, and how do you fix it?
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
Is there something wrong with the iTunes 10.7 Windows installer package?Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
How to update ITunes on my PC (Windows XP)?? Repeated attempts produce this messsage: "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I have an older version of ITunes on the computer. Why can't I update it?
MMettlerRepair your Apple software update.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL/ > Add n Remove Programs, highlight ASU and click CHANGE then REPAIR -
I keep getting the message" There ais a problem with this windows Installer Package. A program required for this install to complete could not be run. Contact your support personnal or package vendor". I get this whentrying to update itunes.
Does anyone have a idea how to fix this/
ThanksTry the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows
Maybe you are looking for
-
Pf status in interactive report
Hi, i have developed an interactive report and i have used menus to navigate from basic list to secondary lists and it worked fine. i tried to create two buttons in the application tool bar FORWARD and BACK to navigate in between basic and secondary
-
[SOLVED] Yaourt: not found on AUR
When I try to run yaourt -Syu --aur I am told that yaourt: not found on AUR This is given for all packages I've installed from the AUR. I am behind a http proxy, but have exported this variable in my shell. And I know that at least some of these pack
-
IMac G5 screen smashed badly. Is it unsafe to boot into Firewire TDM?
I'm advising a small business owner on the fastest and cheapest way to recover data from an iMac G5 that was vandalized. The screen was struck hard with an object of some sort. I'm not sure what other trauma the machine might have experienced. Before
-
GROUP BY in Desktop Intelligence
Question: Is there a way to use GROUP BY statement at the Universe level? Detailed Example: I have Cricket Teams and Team Members. I want to display all the team members for a team in a single cell as comma separated values. At database level, I can
-
I performed the Uncompressed and Extract the files as the directions indicated. Which made an directory named Disk1. What is the next step to install the software onto the system? Thanks, Ray