Installing NI-DAQmx in Windows XP x64
hello,
I've been trying to install NI-DAQmx in a computer with Windows XP x64. I've read some of the discussion news about this issue, yet I could not find any post that has a solution to it. May I know what should I do to get NI-DAQmx to be installed in OS XP x64? Thank you very much for your time and help.
If you have read some of the posts, then this one should explain it all. There is no driver for XP 64 nor do I think it's likely that there ever will be one. I haven't even seen much support for this OS from Microsoft. It's all been about Vista.
Similar Messages
-
Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1
-
Problem installing Laserjet 4050 in Windows 7 x64, No driver in Universal Print Driver v5.0.3
I have just installed Windows 7 64Bit operating system. I have be successful in installing several other more recent HP printers in the office. However, my main "workhorse" printer is a HP Laserjet 4050 and I have downloaded the Universal Printer Driver v5.0.3 for Windows x64 - PCL 5 and PCL 6, and in both cases it does not find a suitable driver. The HP download site states these Universal Drivers will work, but I cannot get it to install.
Is there a driver that will work on the 4050 in Windows 7 X64? Thanks everyone.You're probably getting the "Windows cannot locate a suitable printer driver" error if you're trying to add the driver while adding a printer that is shared over the network. You see, HP's Universal Printer Driver (UPD) doesn't contain the PnpIDs of every printers it supports, so when you specify HP's UPD as the drivers for the network printer, if Windows can't find a match for the printer's PnpID it spits out the driver isn't compatible.
The way to overcome this is to install a "generic" printer locally, using HP's UP driver, and change the port afterwards to point to the shared printer. So, first, add a local printer (that will be using the LPT1 port - make sure no printer is attached!), and click on "Have disk(s)" to browse to and select HP's UPD. Going through the remaining steps should install a locally-attached printer named something like "HP Universal Printing PCL 5" (or "[..] PCL 6"). You'll then go in the new printer's properties, on the "Ports" tab, and click on "Add Port...". If you're installing a shared printer, you'll select "Local Port", click on "New Port..." and specify the path to the printer (e.g. \\myserver\hplaserj) as the port name. Those steps should do the trick.
Last thing: beware, though, as HP's UPD PCL 6 might not be compatible (anymore) with your LaserJet 4050, as they use a PCL XL class number/revision (class 2.1; sort of a version number of the protocol) that is higher than what your printer's firmware might support for PCL6 (should be class 2.0) I know the latest versions of HP's UPD PCL 6 doesn't work with our LJ 4000 & 4050 printers, so you might have to use the PCL5e driver for those 64-bit workstations.
Background info:
PCL XL error on Laserjet 4550n with PCL 6 driver [IT Resource Center Forums]
Universal Print Driver PCL6 broken on LaserJet 4000 [IT Resource Center Forums]
Printer Command Language [Wikipedia]
Let us know if it works. -
X64 Oracle 11g R2 Install On i7 3770 Windows 7 x64 Enterprise System Fails
x64 Oracle 11gR2 installation on my new Windows 7 x64 Enterprise system fails after the "Desktop/Server Class" screen. I click Next, and then nothing happens. The install app closes and no installation logs are available. I checked the Windows logs and there is nothing obvious.
My new system has an Intel i7 3770 cpu with 32GB of ram. My old system had twin Intel Xeon EM64T cpus with 3GB of ram. Both systems ran Windows 7 x64 Enterprise. x64 Oracle 11gR2 installed and ran fine on the old system, but the old system started making "funny" noises and had to be replaced.
This is my personal system, not a commercial installation. I got Win 7 x64 Enterprise from my community college, which is a Microsoft Partner. I need Oracle for my relational database classes.
The story so far:
1. I downloaded win64_11gR2_database_1of2 and win64_11gR2_database_2of2 and unpacked both of them into a folder named win64_11gR2_database_install, replacing as necessary.
2. I set up a loopback adapter and added the following entry to c:\Windows\System32\drivers\etc\hosts:
10.10.10.10 localhost PaulK-PC # Loopback Adapter for Oracle 11gR2 Install
3. After creating the loopback adapter, I restarted my PC. I can ping the adapter with no problems.
4. I ran c:\Users\PaulK\Downloads\Oracle\win64_11gR2_database_install\database\setup.exe as Administrator.
5. I skipped email notification, since I don't have a support agreement.
6. I select "Create and configure a database".
7. Whether I select Desktop Class or Server Class, when I click Next, the installation app dies.
Page 2-2 of Oracle Database Installation Guide 11g Release 2 (11.2) for Windows E24186-01 states that an x64 installation of Oracle requires an AMD64 or EM64T cpu. Does this mean I need to install the x86 version of Oracle 11gR2, or is there some other problem?
Suggestions?
Thanks.And Part II:
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.DatabaseChecks updateAccountStatus
CONFIG: SYSMAN password modified
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.DatabaseChecks updateAccountStatus
CONFIG: Unlocked SYSMAN account
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: orcl
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil isHASInstalled
CONFIG: isHAInstalled: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 agentHome: null isCentral: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 isDBC: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 isDBC: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to E:\app\PaulK\product\11.2.0\dbhome_1\oui
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [E:\app\PaulK\product\11.2.0\dbhome_1]
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME E:\app\PaulK\product\11.2.0\dbhome_1
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file E:\app\PaulK\product\11.2.0\dbhome_1\install\staticports.ini
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: E:\app\PaulK\product\11.2.0\dbhome_1:localhost:null:orcl:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_localhost value: 3938
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_localhost value: 1158
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_localhost value: 5540
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_localhost value: 5520
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for Node: localhost : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig copyAgentTimeStampFile
CONFIG: File: E:\app\PaulK\product\11.2.0\dbhome_1\localhost_orcl\sysman\emd\agntstmp.txt:localhost does not exists.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked relevant accounts
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Finished executing emreposoutofbox.sql
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Submitting dbms job: E:\app\PaulK\product\11.2.0\dbhome_1\sysman\admin\emdrep\sql\core\latest\admin\admin_submit_dbms_jobs.sql
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Successfully submitted dbms job
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: connectDesc : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=orcl)))
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at E:\app\PaulK\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to E:\app\PaulK\product\11.2.0\dbhome_1\oui -
Unattended silent install script fails on Windows 7 x64
Hello,
We are an IT managed services provider and use RMM tools like Kaseya and LabTech to manage our clients' machines.
We are trying to write a deployment script to deploy and/or update Java on Windows XP/7 machines. We are having difficulty deploying Java in silent mode on Windows 7 x64 using our RMM tool and thought you would be able to shed some light as to why this happens. We can successfully silently deploy Java on Windows 7 x86 and Windows XP using the RMM tool, together with other software like Acrobat Reader, Flash player and Firefox.
When we manually run the installer with the /quiet switch through the command prompt, installation completes successfully. However, when we use our RMM tool to deploy Java with the same switch, installation hangs: when looking at Task Manager, the Java installer hangs indefinitely and must be manually killed. Also, the installer runs as the SYSTEM user, if that makes any difference.
Can anyone advise what is the reason that the installer hangs and doesn't complete the installation?
Thanks.Hi
I experience the exact same problem. Erez - did you find a solution?
-Thomas
Edited by: 832009 on 2011-01-28 02:23 -
Can't install adobe reader in windows 7 x64
I try to install adobe reader, but always get teh erroe message "unable to install, can't find my documents"
I have the map my documents at disk E:, my windows is in disk C:
Can someone give me an advice what to do?
Thanks,
GuidoI CAN'T INSTALL EITHER..GET ERROR : MIGRATION HAS STOPPED WORKING ????
-
Getting Problem installing Oracle 11gR2 on Windows 7 x64
Hello everyone,
beforhand thank you for helping a rookie. :-)
I getting an error message that my installation path contains empty spaces. C:\Program Files\....
In previous Releases of Oracle you could cancel these error message. Not in 11gR2.
Does anyone know a solution to install Oracle 11gR2 Client in the Windows Program Files (x86) / Program Files folder?
I modified the *.rsp File line "Complete path of the Oracle Home" with double quotes like in the previous Versions.
tried the environment variable "%...%" and also the DOS writing style "PROGRA~2".
Oracle takes over the complete notation.
Iam Working on a Windows 7 64 Bit Machine with an english Kernel.
Have to install: Oracle Client 11gR2 64 bit
Thank you in advance.
Best regardsWas there ever any thoughts on this issue? I'm using Oracle 11G R1 and it lets me cancel past errors saying I can't install to c:\program files\oracle because it has spaces and the programs I use also work perfectly fine.
Now, we're using Win 7, thus want to use Oracle 11G R2 so it won't fail OS checks and why not use the newest, right? Well, as stated here, you cannot cancel past "space" error any longer. I was going to try %programfiles% but it appears that that won't work; LAME!
Also, the runtime install for R2 says it's going to be 200MB more than the runtime install for R1, why would that be the case? That's a LOT more!
Thanks, Nick -
Will not install on windows 7 x64
I get error on install on a Dell Windows 7 x64 bit laptop - trying to install the Cloud gives me the same error -
There is a problem with this windows installer package
A program required for this install to complete could not be run.
Contact your support personelThere is a problem with this windows installer package
A program required for this install to complete could not be run.
Contact your support personel
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Installing iTunes 7.0.2 on Windows Vista X64
Hey guys,
Sorry if this has been covered in the past, I looked over the forum and couldn't find anything on this. However I have a solution for installing iTunes 7.0.2 on Windows Vista x64.
What was happening was that anytime I installed iTunesSetup.exe from Windows Vista x64 it said it couldn't find QuickTime and aborted the install. Well what was happening is that all 32 bit installers now go to the "Program Files (x86)" directory. And the install team at Apple hard coded iTunes Install to look for the QuickTime folder in "c:\Program Files" instead of getting the location provided by the OS ("c:\Program Files (x86)\"). So it blows up when it cannot find the QuickTime directory in the wrong location.
First download QuickTimeInstaller.exe and install QuickTime. (http://www.apple.com/quicktime/download/)
Move the QuickTime folder from c:\Program Files (x86) to c:\Program Files
Then download iTunesSetup.exe and install iTunes. (http://www.apple.com/itunes/download/)
Worked perfectly for me. Let me know if anybody has any problems. I would also like to forward what I found to apple so that they can fix this in the future. Does anybody know a good source to send this too?Maybe you can hel me
Im unable to install itunes 7.0.2 because each time I try to i get an error message saying I have insufficient access to that key...the key being HKEYlocalmachine\software\microsoft windows\...etc, etc. etc...
Can you helP??? -
Install Oracle 10gR2 on Windows x64
Is this possible to install Oracle 10gR2 on Windows 2008 x64 ?
I though that there aren't any difference between 2003 and 2008, but during reading this presentation:
http://www28.cplan.com/cbo_export/PS_S291788_291788_176-1_FIN_v2.pdf (login: cboracle pass: oraclec6) I saw that installation on Windows 2008 is "PLANNED"?! Can someone explain more?tutus wrote:
So what thas mean planned?You'd have to ask Christian Shay (apparent author of the document) but given that the document is nearly two years old and 10g is now entering 'sustaining' support without having been certified on Win 2008, I'd guess it means their "plans" changed. -
Itunes 11.1.4 update on Windows 7 X64
My "automatic update" running on Windows 7 X64 for iTunes just "bombed" with errors. The first and repeated error was a c++ related error 6304 which occurs when there is an incorrect or missing "manifest" for an attempted install. The second was a 1114 Windows error telling me that the install failed. After this occurred, I was unable to either use iTunes which had been working or to complete the install manually. I'm now without control of my downloaded content, my appple TV and my own extensive library of mp3 and other files which had been registered with iTunes. My attempts to follow posted directions to complete a "clean install" of iTunes for a Windows X64 system have only led to more problems! Since none of my Apple hardware is any longer under hardware warranty due to its age, I'm caught between a rock and a hard place. I can't get iTunes to work so I can't maintain my iPad, or serve content to my Apple TV! This *****! I have older versions of iTunes installed on older Windows XP and Vista computers which do not take advantage of the X64 hardware I would prefer to use to maintain my library and run my media server for the Apple TV which I've been using to serve content to my Apple TV for years.
When I try to follow posted directions to remove certain directories in the Windows Program Files (X86) directories to get a clean install, I find the files locked by running programs, some of which help support the x86 browsers I run in addition to Microsoft Internet Explorer 11 for X64, so I'm not about to raslhy try to blow away all the software I ever got from Apple just to get a good reinstall of iTunes. Can anyone gvie me suggestions. I'm quite computer literate and a retired software applications engineer.I managed to take the "reinstall route" too.... Here's the lates diagnostic report from my system. I had to unistall the 32 bit drivers which Apple leaves lying around which are booted by default in Windows 7, reboot, then do a full reinstall not by downloading the full package and attempting to run the installer via the download, something that had failed a couple of times, but by "running" the installer directly from the web. The successful install was actually executed from a 3rd party web site, not directly from Apple, something that I am normally loath to do. Here's what the installed package says:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Acer Aspire Z3731
iTunes 11.1.4.62
QuickTime 7.7.4
FairPlay 2.5.16
Apple Application Support 3.0
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.0.32
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 001DB6A80B04D9A0
Current user is not an administrator.
The current local date and time is 2014-01-23 19:52:59.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) G45/G43 Express Chipset
Intel Corporation, Intel(R) G45/G43 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 9d9c2ee8eeda35316ddf4323eecbe290
iPodService 11.1.4.62 (x64) is currently running.
iTunesHelper 11.1.4.62 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {73783F5F-438E-41AF-97CD-4BE36E0AC204}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {DDE044BB-6BCC-4AD9-9631-1343B10976F5}
Description: Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Network Adapter #2
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Thu Jan 23 19:49:59 2014
Lease Expires: Fri Jan 24 19:49:59 2014
DNS Servers: 75.75.76.76
75.75.75.75
192.168.1.1
Adapter Name: {D0A2626C-CFE2-4DAD-81AA-55819A8E0FB3}
Description: Intel(R) 82567V-2 Gigabit Network Connection
IP Address: 192.168.1.149
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Thu Jan 23 19:49:11 2014
Lease Expires: Fri Jan 24 19:49:11 2014
DNS Servers: 75.75.76.76
75.75.75.75
192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-01-23 19:52:13.
This is the second successive release that has given me fits. I'm of the opinion that the problem may have something to do with the need Apple feels that they must have their various "acceptances" of terms and conditions re-authorized on each successive version, or a poorly managed gradual migration of components from the 32 bit code base to the 64 bit code base that causes pathing problems when the automatic updater runs in this Microsoft "hybrid" 32 bit or 64 bit environent. At any rate, uninstalling iTunes completely seems to have had only minimal impact on my library. I did notice that the successful install paused and seems to have executed code which may have updated the structure of my library from that left behind after I unistalled the previous 11.1.3 version. I wish they would do a better job of testing their automatic updating procedure for us poor 2nd class citizens. I'm not going to scrap my newest intel based system just because their software testing folks focus first on Apple's version of the world. -
ITunes 10.5 installation issue on windows 7 x64
I can't install iTunes on my Windows 7 x64 laptop. After turning off UAC, I get the following error: "An error occured while attempting to create the directory: C:\ProgramData\Microsoft\Windows\Start Menu" How can I fix this? Thanks in advance.
I am so frustrated. I have tried everything on here and the Microsoft forums but I cannot install iTunes 10.5.0.142 or 10.5.1.42 on my Windows 7 64 bit computer.
During the install, regardless of whether I do it manually or automatically I get the following error -
An error occurred during the installation of assembly "Microsoft VC80.CRT.type="win32".version="8.0.507276195".publicKeyToken="1fc8b3b9a1e18e3b" .processotArchitecture="x86"". Please refer to Help and Support for more information. HRESULT:0x80070057.
I have uninstalled all apple components, in the coorect sequence, cleared the registry and checked that windows is up to date. I have repaired the installation of .Net Framework and Visual C++ through control panel and I still get the error.
I can reinstall itunes 10.4.1.10 anytime and it works so I find it hard to justify why this doesn't work on anyone other than Apple.
Come on Apple, or anyone else, I am clearly not alone so please get this fixed so we can move to IOS5 too.
Thanks -
Workbench can't open/new or design process in Windows 7 x64
I have question after installed WB 10 in Windows 7 x64 and can't open/new process in new/get application. it showed blank screen that process.
and i checked log in D:\Users\Songvit\Workbench 10\.metadata\.log
!SESSION 2011-11-22 10:15:59.625 -----------------------------------------------
eclipse.buildId=unknown
java.version=1.6.0_26
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Framework arguments: #Product Runtime Configuration File
Command-line arguments: -os win32 -ws win32 -arch x86 #Product Runtime Configuration File
It loaded with JRE x86
i install JDK 1.6 update 29 x64 (jdk-6u29-windows-x64.exe from ORACLE) and already set environment path of WB_JRE_Home to C:\Program Files\Java\jre6
but in my ADEP server has installed in Windows 2003 Server (x86) and install WB too. It worked.I am having this issue also on my Windows 7 64 bit machine. When I try to open Workbench it takes forever, slips into a non-responsive state, and then when it finally does open I can't actually see anything in the design palette. On my old XP machine ADEP Workbench opened just fine. And on the same Windows 7 machine ES2 Workbench opens just fine.
Any ideas?
I am pasting in the Workbench log message.
!SESSION 2011-12-22 13:29:12.136 -----------------------------------------------
eclipse.buildId=unknown
java.version=1.6.0_26
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Framework arguments: #Product Runtime Configuration File
Command-line arguments: -os win32 -ws win32 -arch x86 #Product Runtime Configuration File
!ENTRY org.eclipse.osgi 2 1 2011-12-22 13:29:13.586
!MESSAGE NLS missing message: Product_ReleaseVersion in: com.adobe.livecycle.workbench.core.messages.messages
!ENTRY com.adobe.lcide.rcp 1 0 2011-12-22 13:29:16.766
!MESSAGE Workbench started at: Thu Dec 22 13:29:16 EST 2011
!ENTRY com.adobe.ide.singlesignon 1 0 2011-12-22 13:29:17.696
!MESSAGE Workbench version '10.0.0.v201107102105'
!ENTRY org.eclipse.jface 2 0 2011-12-22 13:29:19.906
!MESSAGE Keybinding conflicts occurred. They may interfere with normal accelerator operation.
!SUBENTRY 1 org.eclipse.jface 2 0 2011-12-22 13:29:19.906
!MESSAGE A conflict occurred for F2:
Binding(F2,
ParameterizedCommand(Command(com.adobe.livecycle.workbench.applicationview.renameCommand, Rename...,
Category(com.adobe.livecycle.workbench.applicationview.category,%applicationview.commands .category.name,%applicationview.commands.category.desc,true),
com.adobe.livecycle.workbench.applicationview.handlers.RenameHandler,
,,true),null),
org.eclipse.ui.defaultAcceleratorConfiguration,
org.eclipse.ui.contexts.window,,,system)
Binding(F2,
ParameterizedCommand(Command(org.eclipse.ui.edit.rename,Rename,
Rename the selected item,
Category(org.eclipse.ui.category.file,File,null,true),
,,true),null),
org.eclipse.ui.defaultAcceleratorConfiguration,
org.eclipse.ui.contexts.window,,,system)
!ENTRY com.adobe.ape.core 2 1 2011-12-22 13:29:22.097
!MESSAGE Still waiting for DestinationService after 2 seconds -
Daqmx 9.02 on windows vista x64
I tried to install the latest daqmx drivers but it gave me a bunch of errors while installing NI-VISA and a bunch of other products. Eventually it finished installation but now nidevmon.exe does not start.
Here's what I'm trying to do:
I already have Labview 8.6 with daqmx 8.7 installed. I upgraded my application to Labview 2009 with daqmx 9.02 on another machine. Now I want to transfer that application to this Vista x64 computer. I also want to be able to run the older application (built using 8.6). I was hoping I could install 32-bit version of Labview 2009 along with the latest version daqmx and visa and then the upgraded application will work. Is it possible that the installation files were just corrupted? Can I install 32-bit daqmx on x64 vista? I don't really care about the memory usage limit right now.
Solved!
Go to Solution.Hi abdel2,
DAQmx 9.0.2 should work just fine on Vista
x64. Are you getting an error about nidevmon.exe? Were you getting
these errors on the 64 bit machine? It sounds like you might have a
bad installation. Have you tried reinstalling DAQmx? Have you
restarted since you installed?
Installing LabVIEW on Windows Vista x64 Edition
Regards,
Jim Schwartz -
I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck
Maybe you are looking for
-
Can't ping ASA 5510 inside interface
Hello, everyone, I ran into a very strange icmp ping issue that I could not seem to undersatand, hope someone can provide a troubleshooting tip on this. The network has been working fine other than the issue listed below, L2L VPN works fine and all
-
Hello, I have recently encountered a problem with my microsoft word. Everytime i try to save a document onto my destop microsoft word freezes and shuts off saying that there has been an error. It tells me to report the error and that it will give me
-
Hi everyone, Spry is growing. I was checking all posts in this forum but I couldn't find somebody who try to duplicate inputs, texteareas, ... and other html element with spry. Is it possible ? I llok the documentation also and I could not find somet
-
How do I reset an IBAction in objective-c
What I mean is how do a start the IBAction over again with a click of the same button or another.
-
Can i transfer a video from quick time pro to a dvd
can i transfer a video from quick time pro to a dvd