Installing NI-USRP for LabVIEW 2012

It's been a few months since LabVIEW 2012 was released. Is there a supported way to install NI-USRP support for LabVIEW 2012 or does a new installer of NI-USRP need to be released? As of right now, NI-USRP 1.1 is available and installs support up to LabVIEW 2011 but not LabVIEW 2012.
Thank you!
Dr. Spaceman
"Really? I think you mean radio."

Dr Spaceman,
Generally we recommend that most people use the 32 bit version of LabVIEW unless they are planning on using our vision software. Many of our toolkits and modules only work with LabVIEW 32 bit. This article talks more about the difference between 32 bit and 64 bit. http://digital.ni.com/public.nsf/allkb/71E9408E6DEAD76C8625760B006B6F98
Regards,
Leah
"All right, now that the popsicle's melted we've got ourselves a tongue depressor."
Regards,
Leah
National Instruments
Applications Engineer

Similar Messages

Console freez after install Rollup 5 for DPM 2012 R2

Hello,
first domain admin installed Update Rollup 5 for DPM 2012 R2. The DPM console freeze in "Monitoring" area in second domain admin. In first domain admin DPM console works good. Do anybody know where si problem?
Thanks,
Jakub

Hello Cejka,
The GUI might freeze in one of the the following cases :
Case1:
You have never protected the DPM server’s System State, with the DPM server itself
You have protected some System State from other Production Servers
You upgrade to UR5
You trigger an inquiry on the DPM Server itself
Case2:
You have a primary DPM server protecting the System State of a Production Server
You have attached the primary DPM server to a secondary DPM server for Disaster Recovery
You upgrade the secondary DPM server to UR5
You trigger an inquiry on the
primary DPM server in the secondary DPM server UI
Then:
The UI crashes, and gets hung if you start it again
Cmdlets are also unresponsive
Workaround:
Stop all DPM services (MSDPM, Access Manager, DPM Writer, DPMRA, VssNullProvider)
Open the SQL Server Management Studio (Either from Start Screen, or Run: ssms.exe)
Connect to the SQL Instance holding the DPM DB
Backup Your DPM Backup
Right click the DPM DB and click on “New Query”
Paste the following SQL script:
DELETE
FROM dbo.tbl_IM_ProtectedObject
WHERE
ProtectedObjectId IN
SELECT PO.ProtectedObjectId
FROM dbo.tbl_IM_ProtectedObject
AS PO
JOIN dbo.tbl_AM_Server
AS SRVR
ON PO.ServerId
= SRVR.ServerId
WHERE (CONVERT(VARCHAR(4096),PO.ComponentName)
= 'System State'
OR CONVERT(VARCHAR(4096),PO.ComponentName)
= 'Bare Metal Recovery')
AND PO.ProtectedInPlan
= 0
AND PO.ProtectedObjectId
NOT IN
(SELECT
ProtectedObjectId FROM
dbo.tbl_IM_ProtectedObjectAlerts)
AND LOWER(CONVERT(XML,PO.LogicalPath).value(
'(/child::ArrayOfInquiryPathEntryType/child::InquiryPathEntryType[attribute::Type="Server"]/attribute::Value)[1]',
'VARCHAR(4096)'
)) !=
LOWER(SRVR.ServerName)
Press F5 to execute
Start all DPM services
The UI and cmdlets should work normally as before
Islam Gomaa Microsoft MVP | System Center Data Protection Manager email: Islam @ Islam Gomaa.com Blog: http://owsug.ca/blogs/IslamGomaa Website: www.islamGomaa.com

OpenG Toolkit for LabVIEW 2012?

I'm trying to install OpenG Tooklit using VI Package Manager. The LabVIEW 2012 is registered in VIPM and VIPM successfully connects to LabVIEW. But when I'm trying to install the package, VIPM says that "This package is not compatible with your operating system or any LabVIEW version installed on your computer".
The package is displayed in LabVIEW tool network VIPM window where I get from the LabVIEW's welcome screen. I don't understand what I'm doing wrong. Any idea?

I do not know if VIPM can install packages without Admin rights. It places files in the Program Files folder and this may not be allowed if you aren't an administrator.
This is not a VIPM or JKI forum. You are welcome to ask questions regarding VIPM here but you may get more support over at the VIPM Forum.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Install datasocket support for labview 8.6

Hi,
Can I get a link to download a Datasocket Support for Labview 8.6 or higher?
Thanks
Ken

Installing the Latest Version of DataSocket and DataSocket Server
Problem:
I would like to download and install the current version of National Instruments DataSocket and/or DataSocket Server on my computer. Where can I find the latest version of this to download it from National Instruments' website?
Solution:
The latest release of the DataSocket libraries and the DataSocket Server is installed with the LabVIEW Run-Time Engine. Go to the Drivers and Updates web page at ni.com and search for "LabVIEW Run-Time Engine" and sort by Version to find the most recent version of the LabVIEW Run-Time Engine.
http://digital.ni.com/public.nsf/websearch/40295802535E31B686256E91001859AB?OpenDocument
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Driver NI PXIe 5641r for Labview 2012

hi. i have module NI PXIe 5641r and labview 2012, i installed driver NI PXIe 5641r; however this driver did not support labview 2012 softwave. help me please!

Hello!
You should be able to download the PXIe-5640R 1.7 to work with your PXIe-5641R. Here is a link to that driver:
http://www.ni.com/download/ni-5640r-1.7/4371/en/
According to the readme, this will work with a PXIe-5641R as well as 32-bit LabVIEW 2012. Hopefully this helps!
Thanks,
Stephanie S.
Application Engineer
National Instruments

Installing SQL server for SCCM 2012 local vs on its own server (primary site enviorment only)

Hello,
When building a primary stand alone site server does Microsoft consider it best practice to install sql locally or on its own server. Is there an official statement from Microsoft suggesting this?
Thanks ins advance
Phil
Phil Balderos

There is no official statement either way from Microsoft as both configurations are fully supported. Generally speaking, it is easier to collocate SQL on the same system as the Primary Site so long as the server meets the hardware recommendations.
Among the trade-offs are reduced network traffic vs avoiding a single point of failure for the site itself. Since the CM site license also includes the license for SQL, licensing is not really an issue.

Manually downloading and installing Windows Updates for WinServer 2012

Hello There,
I got couple of WinServer 2012 which are in DMZ and doesnt have internet access at all.
I would like to download Windows updates on my machine and install these on the servers manually please suggest.
Regards,
Maqsood
Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified

Hi Maqsood,
To download the update manually, we can visit the web site below,
http://catalog.update.microsoft.com/v7/site/Home.aspx
We can download the updates to a removable disk, then copy the updates to these servers.
Best Regards.
Steven Lee
TechNet Community Support

Install Hardware Support for LabVIEW

When updating to LabVIEW 2013, I'm asked to install appropiate device drivers, but I dont know where to find them.
Solved!
Go to Solution.

Since you just need DAQmx, use this installer: NI-DAQmx 14.5
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

MATRIX Toolkit for LabVIEW 2012 for LEGO Mindstorms Installer ?

Hello,
Please help
Solved!
Go to Solution.

Hi 40123157,
MATRIX support is included in the MINDSTORMS Competition Toolkit. You can find last year's toolkit here: http://www.ni.com/download/labview-ftc-toolkit-2012-2013/4331/en/.
An updated version of this toolkit for 2014-2015 is targeted to be released at the end of August.

Vlm 3.0 LabVIEW 2012 SP1 disabled in Installer

Hello folks,
i have a Problem with die build Installer with my new updatet vlm 3.0.
I already get the the new license file for vlm 3.0 and installed it, then i made the installer for
LabVIEW 2012 SP1 like i have done it with the previous versions of LabVIEW 2009 2010 2011
In the produkt list of the installer LabVIEW and the DriverDVD is disabled by default (see Screenshot).
Solved!
Go to Solution.

Today i was looking on the server and i have seen that the licenses are LabVIEW 2012 licenses.
I want to install LabVIEW 2012 SP1.
So that's normal, i think i have to wait until i get the new license file for the new version.
Thanks BRennhofer for this idea.
I will report here.

Is Labview 2012 run-time on TPC-2206?

When I go to Uninstall programs on my TPC-2206 I see Labview Run-Time 2009, 2010 and 2011. Labview 2012 Run-Time does not show up in the list. When I download and install it, I still only see the above plus a generic National Instruments program. The new TPC-2206 touch panels we have show a generic National Instruments program in the program list, but I don't know how to find out if that is Labview 2012 Run-Time. I can't find anywhere on the NI website that lists what Run-Time software is already loaded on the Touch Panels.

I did try running a Labview 2012 executable after I had put up the post. It did not work, so I knew that Labview 2012 Run-Time was not on it. I put Labview 2012 Run-Time on it, but afterwards when I looked in the Remove/Change programs list in the Control Panel, Labview 2012 Run-Time was not in the list of installed programs. There was a generic National Instruments program, but there was nothing identifying what NI program it was. This was the real problem, because all of the earlier versions of Labview Run-Time were clearly identified in the installed programs list and Labview 2012 Run-Time was not. There is no way to know if Labview 2012 Run-Time is installed except to try to run a Labview 2012 executable.

LabVIEW 2014 to LabVIEW 2012

Hello there,
Would you convert my LabVIEW 2014 vi's as available for LabVIEW 2012 ?
Thanks for your all support

Here you go.

Why no NI/Labview 2012 April Fools

NI often has a nice April Fools news announcement why not this year?
I look forward to their pranks and didnt see one this year.
I would vote for Labview 2012 - avaliable in text editing only format for c/c++ programmers
or
SBArdunio release expected - a low cost sbrio to be released in Ardunio form factor battery powered and compatable with all existing shields. SBArdunio features a 100MHz Arm-cortex processor and Xilinx FPGA programmed nativly in Labview RT and FPGA supported.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

I would suggest they announce LabVIEW 2012 for OS/2.
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Installing both Vision Builder 2012 and LabView 2012 on same Computer

am new to NI Vision Builder Automation Inspection 2012 (Which I am supposed to learn and use for part inspection) as well as LabView (Which I need not know at this time)
When I was presented (to work with) a 1722 Camera and the computer, Labview 2012 was already installed but not Vision Builder.
The IT folks installed the Vision builder without uninstalling LabView.
I have my problems getting upto speed with my inspection work, but is any of it attributed to both systems being on the computer?
Can I (Must I) uninstall LaView??
Thanks

LabVIEW and Vision Builder run fine on the same computer. I have several versions of each on mine with no problems.
Bruce
Bruce Ammons
Ammons Engineering

Unable to install labview 2012

I am trying to install labview 2012 on my Windows 7 64 bit system,but it fails;
Here is symptom:
1) I click the setup.exe directly and it shows that:
2) if I run it with administrator, it shows that:
3) i have checked that I can run other exe file...
Thanks
Solved!
Go to Solution.

Hi Bestchun,
It could be a corrupted installer file. Please try re-downloading the installer from ni.com/downloads.
I'll monitor this post, so reply if this doesn't work for you.
-N
National Instruments
Applications Engineer

Installing NI-USRP for LabVIEW 2012

Similar Messages

Maybe you are looking for