Installing NIDAQ 7.5 cause error in VB6 "nidaq32.dll not found"

Hi,
Anyone had this problem? I installed the NI-DAQ 7.5 drivers because
I've been trying to get an application working with my 6533 card which
just had DAQmx support added for it in 7.5. I have old code in VB6 that
makes straight driver calls that I was trying to migrate to VB.NET. So
I installed the new drivers and now I can access the card fine in
VB.NET, however, my old VB6 application no longer works. It gives me
the following error:
Run-time error' '48':
File not found: nidaq32.dll
I went searching and the nidaq32.dll is still sitting in my
Windows/SYSTEM32 folder, so that should be fine. The only thing I've
changed since it stopped working is the installation of NI-DAQ7.5. I've
tried reinstalling the driver. I've also tried overwriting the three
nidaq32.bas files that I had in my project directory with the new ones
in the nidaq/includes folder. Anyone else have this happen and/or know
a solution for it?
Thanks,
Chris

Dear Chris,
Please see this post.
Have a great day!
Marni

Similar Messages

Installing update resulted in error message MS VCR80.dll not found, Apple mobile device failed to start

Can you help with error message on installing itunes on Windows XP: error message MSVCR80.dll not found. Apple Mobile Device failed to start. Error 7 Windows error 126.
Deleting itunes and reinstalling does not fix it.

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

TS1717 Getting two error messages when trying to access I Tunes on my Windows 7 Computer: Windows Error 126 and MSVCR80.dll not found

Having difficulty accessing I Tunes on my Windows 7 Vista.
Error messages are two fold:
1. MSVCR80.dll not found. Reinstall may help correct prob.
2. Windows Error 126.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Error Message RunDLL (djhweold.dll not found)

I have a HP Pavilion g6-1d78nr Notebook PC with windows 7 Home Premium. A few months ago I got an Internet browser redirecting virus. I had alot of difficulty removing it with my norton so I used other software such as spybot found online. One of the programs detected a file called dhjweold as bad for my computer and I deleted. Eventually I got rid of the virus and changed all my passwords because I had a fraudlant charge on my debit card which I think had something to do with the virus.
Now when I start up my notebook I receive the following error:
RunDLL
There was a problem starting C:\Users\Shorty\AppData\Local\{21014283-3890-4468-91F9-0E9994EF1959}\Microsoft Help\dhjweold.dll
The specified module could not be found
Along with recieving this error message, sometimes I can not open any programs or icons at all.
It usually takes 1 to 3 reboots before the computer will start working normally, but I will recieve the above error message everytime the computer starts up.
I can't seem to find a solution on the internet. I would appreciate any advice.
Thank you
This question was solved.
View Solution.

Hello jnix,
Following the steps in the following link place your computer in a clean boot state and see if the error message comes up again and if the other issues still happen.
Understanding Windows Boot Options
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

After new itunes upgrade getting Windows error 126 that identifies MSVCR80.dll not found. itunes unable to open. Anyone have cause and resolution.

After installing new itunes upgrade on Windows Vista PC, itunes does not open. Getting error boxes identfiying Windows error 126 (error 7) plus; MSVCR80.dll not found.
Anyone have casue and resolution?
Apple support did not have file or process available to backoff to previous itunes version v11.1.3 to allow recovery so itunes could continue use with no problems as before this new upgrade.

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Help

am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

Hi,
Here is a similar thread for your reference:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
Hope this helps
Vincent Wang
TechNet Community Support

I am trying to install livecycle trial version, but i get Error 13:11 Source file not found

Why do they even offer a free trial version of livecycle es4, when its obviously not free??????
i have tried from two different computers, windows 7 and windows 8, and before it can finish installing,
a messsage pops up saying Error 13:11 Source file not found verify file exsist. what does that even mean?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes. What next? I've not had this problem with other updates requested by Apple.

I have also had the same problem with my Win 7 32 bit computer. I had great help from Apple techs in Montreal and Orlando for 2.5 hours. They helped me remove every trace of Apple products and clean the registry in two different ways. Each install gave the same problem! If Apple techs can't fix it (on some of our machines) then we are really in trouble. They promised to raise it with the "engineers" and get back to me with a solution. I am waiting and hoping. Otherwise maybe version 11.1.5 will have a fix ??

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

HT1349 Not a Mac computer-have had ITunes on this computer for literally years. This morning i am getting an error message trying to open Itunes - MSVCR80.dll not found, Not installed correctly Error 7 (Windows error 126). DL would not work. Help!

Have had Itunes on this computer literally for years. This AM message "MSVCR80.dll not found, not installed correctly Error 7 (Windows error 126) "- and could not download (it wanted a mobile device - I don't have one)
Help!

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

ERROR: NetExpress 5.0 path Not found - OUAF SDK 4.1 install

I was finally able to install the SDK with all your help but now I am looking at another problem.
In the installation document, after adding Eclipse it says:
Start Eclipse by opening the Oracle Utilities Software Development Kit Client Scripts directory
(Start ? All Programs ? Oracle Utilities Software Development Kit 4.0.0.x ? Oracle Utilities
Software Development Kit Client Scripts) and then double-clicking startEclipse.bat; x is the
build number.
This launches Eclipse with the Welcome tab shown.
When I run the .bat file I get the following error:
ERROR: NetExpress 5.0 path Not found ... at C:\OUAFSDK\SDK\4.0.0.5\Scripts\bin\getBinDirectory.pl line 52.
Nowhere in the install doc does it mention anything about NetExpress.
Any ideas?
Thank you.

Actually I was happy to soon.
After installing Net Express, I don't get that message anymore but nothing at all is happening. Eclipse should be starting according the the install guide. I am starting to wonder how accurate that guide is since quiet a few things are missing already. This is really frustrating.

HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

Cant install Itunes on my work computer, get error message Apple Application support not found, so i uninstall and reinstall again and its the same message

cant install Itunes on my work computer, get error message: "Apple Application support not found, so i uninstall and reinstall again and its the same message

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2

Itunes won't install. Error message: Apple Application Support not found

Itunes won't install. Error message: Apple Application Support not found. What is the fix for this?

It is always these four updates that fail. I've tried downloading and installing them seperately from apple downloads. I've tried various recommended fixes, and nothing I can figure out works. Before these problems, itunes worked on the computer for a year.
Thank you again for wanting to help me.
Ken
1) Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
Installation date: 12/17/2011 7:58 PM
Installation status: Failed
Error details: Code 643
Update type: Important
A security issue has been identified leading to MFC application vulnerability in DLL planting due to MFC not specifying the full path to system/localization DLLs. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.microsoft.com/fwlink/?LinkId=216803
Help and Support:
http://support.microsoft.com
2) Security Update for Microsoft Office Excel 2003 (KB2596954)
Installation date: 12/17/2011 7:56 PM
Installation status: Failed
Error details: Code 57E
Update type: Important
A security vulnerability exists in Microsoft Office Excel 2003 that could allow arbitrary code to run when a maliciously modified file is opened. This update resolves that vulnerability.
More information:
http://support.microsoft.com/kb/2596954
Help and Support:
http://support.microsoft.com/?LN=en-us
3) Update for Microsoft Office Outlook 2003 Junk Email Filter (KB2597035)
Installation date: 12/17/2011 7:56 PM
Installation status: Failed
Error details: Code 57E
Update type: Important
This update provides the Junk E-mail Filter in Microsoft Office Outlook 2003 with a more current definition of which e-mail messages should be considered junk e-mail.
More information:
http://support.microsoft.com/kb/2597035
Help and Support:
http://support.microsoft.com/?LN=en-us
4) Security Update for .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2478662)
Installation date: 12/17/2011 7:52 PM
Installation status: Failed
Error details: Code 80070BC9
Update type: Important
A security issue has been identified that could allow an attacker to compromise your Windows-based system that is running the Microsoft .NET Framework and gain complete control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.microsoft.com/fwlink/?LinkID=211424
Help and Support:
http://support.microsoft.com

Installing NIDAQ 7.5 cause error in VB6 "nidaq32.dll not found"

Similar Messages

Maybe you are looking for