Installing NSU for N95

When I try to run the installer I get the 'Error- C:/windows\nokia installer.msi' thing, where it can't find it.
It has run ok in the past, but I had to recently mess about uninstalling/reinstalling this and pc suite and now I'm at this point. Any help would be much appreciated.
Nokia N95 V11.0.026 17-04-07 RM-159 Vodafone Pay Monthly
XBOX Live Gamertag : Mafustokes

Hi Kiattz
Go to:
http://europe.nokia.com/A4176089
Pick phone say a N80 > download NSU application which is same for all and install; when you connect phone it will recognize that it is N95 and dependent on product code (label under battery) determine whether firmware update is available!
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Where to downlaod NSU for N95

why i cant find NSU for N95?
anybody can help me!!!

Hi Kiattz
Go to:
http://europe.nokia.com/A4176089
Pick phone say a N80 > download NSU application which is same for all and install; when you connect phone it will recognize that it is N95 and dependent on product code (label under battery) determine whether firmware update is available!
Happy to have helped forum in a small way with a Support Ratio = 37.0

How to install dictionary for N95 8GB

AFTER I UPGRADE MY PHONE SOFTWRE VERSION , MY PHONE DICTIONARY WAS MIISING..SO HOW TO INSTALL THE DICTIONARY??
THKS

03-Dec-2007 06:25 AM
esvilne wrote:
AFTER I UPGRADE MY PHONE SOFTWRE VERSION , MY PHONE DICTIONARY WAS MIISING..SO HOW TO INSTALL THE DICTIONARY??
THKS
03-Dec-2007 06:25 AM
esvilne wrote:
AFTER I UPGRADE MY PHONE SOFTWRE VERSION , MY PHONE DICTIONARY WAS MIISING..SO HOW TO INSTALL THE DICTIONARY??
THKS
Did you find out how to install the dictionary?

Update suggest for N95

Hello.
I would like to suggest to make somekind of update for Nokia N95 Multimedia buttons. They seem not to work with other softwares than the music player.
It's hard to use some landscape mode programs which need both hands to use (For example pressing numbers and arrows keys at same time is pretty annoying.)
The programs can't see those music buttons available for use. It would be so much easier if you could even use two of the multimedia buttons.
I'm not sure if this kind of update would be possible to make through firmware update or is it hard to make but it would help a lot.
PS: On the other way the phone is really great !

Things to do.
(Uninstall first all nokia* progs in add/remove progs in control panel)
1. Install new version of PC suite 6.86
2. Install NSU 1.43.6
3. Turn off your phone
4. Make a hard reset by pressing 3 buttons; green button (for calling and answering call), *-button and 3-button. (note: ensure that you press the three buttons then turn on the mobile. It will ask you the region/country, current date and time if the hard reset is successful).
5. Open the NSU then update your phone.

When new update for N95 ,the code is 0551989

Hi body here ,when is the new firmware version for N95(code is 0551989)? my version is V12.1?
thanks!

First of all, there is no AppleWorks "staff" - we are all just users like you.
AppleWorks 6 has not been updated since January, 2004, for the Mac & PC. The odds of another update are "slim & none" since iWork ’05 was announced as "building the successor to AppleWorks." I've not used XP, but have used AppleWorks 6 on Windows 95, 98 & 2000 with it being less stable on each successive version. I currently use AppleWorks 5 on my work PC with Win2K. I had read that AW 5 wasn't stable on Win2K, but it is certainly better than AW 6. When they "upgrade" us to XP Pro next month, I'm going to try to get the "helpless" desk to install my AW 6 again & see how it does. Meanwhile, I find it easier to take my MacBook Pro to work & use it along side the PC.

5610 default theme for n95

helloguys
im looking for the 5610 music express default theme (red)to be installed on my n95... has anybody know where i can download such? i really love this black and red theme.. thanks a lot
CeS
"The best index to a person's character is how he treats people who can't do him any good, and how he treats people who can't fight back"

Hi,
Please check the blog below. This uses feature stapling. I dont think there is another way to solve your problem.
http://sharepointologic.blogspot.in/2013/04/branding-sharepoint-2013-my-sites-with.html
Please remember to click 'Mark as Answer' on the answer if it helps you

How do I save an install file for Photoshop CS6

I need to get an install file for Photoshop CS6 (not CR) that I can use on a Windows PC that, due to security reasons, does
not have access to the internet. In the past I have been able to save the install file for Photoshop and/or Lightroom on my internet connected PC and then move it to the the target PC on a thumb drive or CD. But now with the CC and the new "Adobe Installer" I can't seem to see how to capture the install file.
Please let me know how to do this.
dan

Refer to this:
Direct Download Links for Adobe Software
Mylenium

Impossible to install Creative Cloud after install Yosemite for Mac

Impossible to install Creative Cloud after install Yosemite for Mac

Error 62 https://forums.adobe.com/thread/1573853
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Cannot view InfoPath Form on SHarePoint 2013 since I removed SkyDrive for Business and installed OneDrive For Business

I removed SkyDrive for Business and installed OneDrive for Business on my laptop. After that, I had problems opening a Word and Excel document in a SharePoint site (SP2013). After installing Service Pack2 from Office2010, this problem is solved.
But I still have the same problem with InfoPath. Whenever I click an InfoPath form (I have InfoPath 2010 on my laptop),...
... I get the error "cannot display web page".
When I change the URL
ms-infopath:ofe|u|http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
into
http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
I can open the InfoPath form and read it.
Any ideas about how to fix this ? I already tried to restore the Office 2010 via Control Panel - Install Programs but without any success...

Hi Gert,
As I understand, you can’t open InfoPath form in SharePoint 2013 unless you change the URL without “ms-infopath:ofe|u|”.
There are some reasons which maybe cause this issue, and you can try to do things below:
Access CA -> General Application Settings -> Configure InfoPath Form Service -> Check the two options in User Browser-enabled Form Templates.
Go into the registry by typing regedit from the Run line and rename the SharePoint.OpenDocuments.5 key (ex. SharePoint.OpenDocuments.5.old) under HKEY_CLASSES_ROOT.
In library settings, click "relink documents to this library".
Here are some similar posts for your reference:
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/quot-the-webpage-cannot-be-displayed-quot-when-trying-to-open-edit-an-office-file-from-a-sharepoint-2013-site.aspx
http://www.infopathdev.com/forums/t/28998.aspx
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Not able to install onedrive for business, keeps telling its already installed but its not (W7)

not able to install onedrive for business, keeps telling its already installed but its not (W7)
after a change of the 365 office version OneDrive for business it is not possible to reinstall the software
it keeps telling me it is already installed.
I think some settings are still there from the old install.
how can I remove them or force the reinstall

yeah finally
Problem solved! , my tube is back to normal ( to rock )
all i did is , removed the sys,private,system,resources,data folders from the memory card , switched off my phone , removed the memory card , did a soft reset (*#7370#) and tried to install an application from downloads , i was able to install in the phone memory as memmory card was not inserted then switched off the phone , inserted the memory card and tried to install an application from the downloads, finally i was asked where to install the app. and gave memory card , viola application installed sucessfully
Regards,
evil_night13

I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?

I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

Issue With Report Builder After Installing SP3 for SQL 2008 R2

Hello. We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend. You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
Application url   :
http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
  + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [10/15/2014 9:35:56 AM] : Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
* [10/15/2014 9:36:29 AM] : Installation of the application has started.
* [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
* [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Hi DMcGarveyt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

I´d like to export my iphotos macbook pro.everything worked right when I installed impression for iphoto but when I installed impression 2 for iphoto and I restared my computer the export option in iphoto doesn´t work.Can somebody please help me ?

I´d like to export my iphotos "macbook pro". Everything worked fine when I installed impression for iphoto but when I installed impression 2 now I can´t export my photos. I´ve restarted the computer but still it doesn´t work.
Please can sombody help me with that?
Thank you

Are you running Snow Leopard or Lion? Your info says Snow Leopard. If it's lion then:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Then you can locate the folders mentioned.

Help Please. I am setting up my macbook pro for a second user but office didn't transfer over. Is there a way to have additional users on the same comp have office available without having to re-install it for each user?

Help Please. I am setting up my macbook pro for a second user but office didn't transfer over. Is there a way to have additional users on the same comp have office available without having to re-install it for each user?

mpr130 wrote:
Help Please. I am setting up my macbook pro for a second user but office didn't transfer over. Is there a way to have additional users on the same comp have office available without having to re-install it for each user?
How did you attemp to transfer Office?
OS X Lion: Set up a guest account

Installing Powerpivot for Sharepoint 2013 with SQL Server 2008 R2

Hi,
We are currently setting up a Sharepoint 2013 Enterprise farm with the backend database server being SQL Server 2008 R2 SP2 - my question is can you install Powerpivot for Sharepoint 2013 in this configuration and if so what are the steps?
Thanks in advance!

Here is Microsoft's documentation to Configure Power Pivot for SharePoint 2013
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Installing NSU for N95

Similar Messages

Maybe you are looking for