Installing NVIDIA GeForce GTX 780 problem

I have QU297AA#ABG h8- 1130a as bought from retail and planned to do some upgrades. I purchased the NVidia GeForce GTX 780 Graphics Card and was told I would also need a 600W or better power supply, so I also purchased a 750W one. I have installed everything correctly (to my knowledge) and when I try to boot up the PC, it reaches the welcome screen which is blue and with the HP logo asking me to "press escape for startup menu". That does not work and the PC then beeps 4 times with long pauses in between before changing to a black screen at which I have to hard shut down the PC.
I know that the power supply is fine becuase when I saw back to the graphics factory card, it is fine. I have read a lot of support FAQs and they have told me to update the BIOS and to uninstall my old graphics driver. I have done both and the problem still persists. I have upgraded my BIOS from AMI 7.09 22/7/2011 to AMI 7.12 12/10/2011 which was the latest available.
According to the EVGA manual, the beeping sounds are from one of the following:
1. The card is not seated properly (unlikely).
2. There is a problem with the motherboard's graphic card slot (impossible, as the other one works).
3. Supplemental PCI-E power is not connected to the graphics card (it most definetely is).
4. Graphics card problem (unlikely, it is brand new).
It then says the problem is probably with the motherboard and to contact you.
I hope this has been enough information but I would like to know all of my options.

BossClock wrote:
Video Card is EVGA GeForce GTX 780.
PSU is Thermaltake SMART 750W.
Motherboard is Chicago - IPISB CH2.
OS is Windows 7.
I will take a look at the specs on your MOBO o see which PCIe spec the slot is. The specs don't state the version. I will have to ask an HP internal source. It may take a day for me to get back to you, but as soon as I know, you will as well.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Does cc support Asus Nvidia GeForce GTX 780 Ti DirectCU II OC 3GB GDDR5 Graphics Card

hi, does cc support Asus Nvidia GeForce GTX 780 Ti DirectCU II OC 3GB GDDR5 Graphics Card?

CC what?
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Compatibility of Nvidia GeForce GTX 780 Ti for Premiere Pro

Hi,
I am upgrading my workstation and plan to buy a good quality graphic card which will support smooth editing of 1080p footage and some after effects rendering.
I chose GTX 780 Ti but unfortunately in the compatibility list provided by Adobe, only GTX 780 is supported. So if GTX 780 Ti is used, can I use the Mercury Playback Engine and take full advantage of the graphic card?
Also is my select correct? I was at first confused selecting between Nvidia Quadro K4200 and GTX 780 Ti. I will not be using Maya or 3D Max. Only Premiere Pro, After Effects and sometimes Da Vinci Resolve will be used.
Thanks,
Srijit

Yeah, it works great as mentioned in the table with recommended video cards, if you have at least:
An overclocked I7 6+ core CPU, or Dual E5 6+ core CPU's, and
64+ GB RAM, and
800+ MB/s transfer rates on all volumes.
Otherwise it is overkill and the card will be idle most of the time. See Tweakers Page - Exporting Style

Installed Nvidia GeForce GTX 285 card and am unable to open PSCS5.

After install with current drives for card PS will not open. I cannot get to preferences to chg. GTU which is checked to unchecked to see if this is the prob. Have ??? Nvidia - no help there as they refer back to Adobe. Checked Adobe Support but no help there that I could find. The Raedon card that I ordered with the MacPro worked fine but needed additional speed in rendering as I work on very lg files. Any help would be greatly appreciated. Let me know what additional info from me is needed. (All Master Suite apps open except PS and InDesign.) Thank you.

PS stopped at the very beginning of opening- no pref.,etc were read and the spinning ball continued until I force quit PS. After reading another discussion- "Photoshop Crashes" the response from c.pfaffenbichler held the key to getting PS to open. For now all is as it should be. I reset some of the pref. and have not run into any problems. I have not worked on the InDesign prob. but if cannot get it resolved will go to the correct forum for help. Thank you.

GeForce GTX 780 and Premiere CC 2014 footage issues on Win 8.1

Hey everyone
I just bought a PC media workstation, having been a Mac guy for 15 years. As I was installing apps, AU, AE, Cinema4D all worked as expected. But PR literally would chug when playing back almost any footage (in this case mostly my ProRes422HQ from my BMPC). The playhead moved, I heard audio but the picture never changed. Even the low-quality h264 proxy footage I tested performed like this.
Interestingly, whether I was enabling GPU based editing in Premiere or not, it had no effect whatsoever.
I talked w/ the guys at Mediaworkstations.net and we narrowed it down to what we think is an issue between of graphics card support from Adobe. I even retro-installed CC and CS6 and both had the same results. Was hoping someone from Adobe would speak into this and offer some help.
Motherboard: Asus P9X79-E WS
CPU: Xeon E5-2680 v2, 2.8Ghz 10-core
Video: NVidia GeForce GTX 780 Superclocked
64GB RAM
Windows 8.1 Pro 64-bit
Thanks for any help you can offer!
Andy

Hi John, thank you for the reply! Argh, can't believe I forgot to post that info... Here's the specs, and I did go download Nvidia's installer for the driver so hopefully it is all well.
Andy
NVIDIA System Information report created on: 08/28/2014 23:56:30
System name: USER-PC
[Display]
Operating System: Windows 8.1 Pro, 64-bit
DirectX version: 11.0
GPU processor: GeForce GTX 780
Driver version: 340.52
Direct3D API version: 11.1
Direct3D feature level: 11_0
CUDA Cores: 2304
Core clock: 967 MHz
Memory data rate: 6008 MHz
Memory interface: 384-bit
Memory bandwidth: 288.38 GB/s
Total available graphics memory: 38882 MB
Dedicated video memory: 6144 MB GDDR5
System video memory: 0 MB
Shared system memory: 32738 MB
Video BIOS version: 80.80.45.00.80
IRQ: 40
Bus: PCI Express x16 Gen2
Device Id: 10DE 1004 17873842
Part Number: 2083 0021
[Components]
NvGFTrayPluginr.dll 15.3.33.0 NVIDIA GeForce Experience
NvGFTrayPlugin.dll 15.3.33.0 NVIDIA GeForce Experience
nvui.dll 8.17.13.4052 NVIDIA User Experience Driver Component
nvxdsync.exe 8.17.13.4052 NVIDIA User Experience Driver Component
nvxdplcy.dll 8.17.13.4052 NVIDIA User Experience Driver Component
nvxdbat.dll 8.17.13.4052 NVIDIA User Experience Driver Component
nvxdapix.dll 8.17.13.4052 NVIDIA User Experience Driver Component
NVCPL.DLL 8.17.13.4052 NVIDIA User Experience Driver Component
nvCplUI.exe 7.8.760.0 NVIDIA Control Panel
nvWSS.dll 6.14.13.4052 NVIDIA Workstation Server
nvViTvS.dll 6.14.13.4052 NVIDIA Video Server
NVMCTRAY.DLL 8.17.13.4052 NVIDIA Media Center Library
nvDispS.dll 6.14.13.4052 NVIDIA Display Server
PhysX 09.13.1220 NVIDIA PhysX
NVCUDA.DLL 8.17.13.4052 NVIDIA CUDA 6.5.12 driver
nvGameS.dll 6.14.13.4052 NVIDIA 3D Settings Server

Z77A-GD65 issues with Geforce GTX 780 Video Card

Hey Guys,
I have a issue with a new PC build.
I think it may be a driver or BIOS setting issue, I hope
I bought a MSI Z77A-GD65 motherboard and below are the specs:
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8
- Balistix Sport 8GB sticks (Total of 24 GB memory installed)
- Kentek 875w power supply
- Geforce GTX 780 Graphics Card
My problem is with the Geforce GTX 780 video card, I installed a fresh install of Windows 7 64 bit and
everything runs and works fine,but when i install the Geforce GTX 780 video card and install the
drivers its all good up to this point but when i restart the computer i get this message in the device
manager ""Windows has stopped this device because it has reported problems (code 43)"
I have installed different versions of the driver, a few older and few newer versions with the same
outcome.
I tried to flash the BIOS to the latest version 10.11 but had problems with it picking up my harddrive
after it flashed successfully. I even checked the boot up setting and it all looked good just would not
boot up, so i had to revert back to the v10.8 BIOS version for it to work.
I'm not sure if there is a setting in the BIOS that i need to turn on or off. I'm not familar with this BIOS,
is there a place in it so i can see if the BIOS is picking up the video card, it has to or Windows would
not see it right?
I'm stumped here, do you guys know of a Geforce driver version that works well with this video card?
I truely think the card is fine because when i install the card to the motherboard i dont get any weird
issues until the driver is installed and Windows is restarted.
I would greatly appreciate any help and advise that you guys can give me.
Thanks alot

UPDATE
Well i wanted to post an update on my new build issue.
Here are my specs:
I bought a MSI Z77A-GD65 motherboard with BIOS v10.8
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8 (i had a issue with the newest BIOS flash v10.11 it wouldn't detect the harddrive, could figure that one out so i went back to v10.8)
- Balistix Sport 8GB sticks (Total of 32 GB memory installed) I first had 3 sticks so i got another 8GB stick to fill all 4 banks for total of 32 GB
- Corsair Professional Series 860 Watt Digital ATX/EPS Modular 80 PLUS Platinum Power Supply AX860i (Bought this PS to replace the Kentek PS)
- N780 TF 3GD5/OC (GeForce GTX 780 GAMING) (traded Geforce GTX 780 card for the MSI version of the GTX 780 card)
OK... I got the new Corsair 860w power supply installed and i installed the new MSI GTX 780 video card with the specs above everything installed fine no problems and my son was playing the Bio Shock Infinite game on Steam and about 1 hour into the game he got a blue screen of death, says something like "to prevent damage windows is now resetting" and it turns off so fast can't read the rest of the message.
I'm going to here in a little bit and update all device drivers with MSI Live update utility and also update the motherboard BIOS again to v10.11.
I'm really confused here, I'm also going to take out some memory and try to run it with sticks only in slot 2 & 4 to see if it runs more stable like that, also should i update the video card to the latest driver, i know the latest is not always the greatest driver.
I want to think you guys again for your help & time with this issue. I really dont know what else to do here, everything is new in this PC.
Thanks

Keine CUDA Beschleunigung mit GeForce GTX 780 Ti [MSI N780Ti (MS-V298)] ?

Hallo Forum,
ich hab mir gerade einen neuen Schnitt-Rechner zusammengestellt mit einer NVIDIA GeForce GTX 780 Ti Grafikkarte.
in den Spezifikationen seht, daß die Grafikkarte CUDA unterstützt. Der Nvidia Driver ist aktuell, in der Nvidia Systemsteuerung ist auch der "Nvidia CUDA Driver 6.0.1" angeführt.
Premiere CC 2014 bzw. Media Encoder jedoch gibt die Meldung, daß die Karte für GPU Beschleunigung nicht zertifiziert ist. Und tatsächlich dauert ein Renderprozess mit Software oder GPU Unterstützung gleich lange.
Hat wer einen Tipp was bei mir falsch läuft?
beste Grüße
Gerhard
Sysinfo:
X79-UP4, Mainboard
Core™ i7-4930K, CPU
GeForce GTX 780 Ti Gaming
Windows 7 Professional

wow, ist ja krass,
na das hätt ich früher wissen sollen ....
Danke für die Info!!
lg Gerhard

Will NVIDIA GeForce GTX 560 fit into HP ProBook6470b

Hi,
I want to install NVIDIA GeForce GTX 560 card into my HP laptop ( ProBook 6470b). Will it require any other hardware also?
On which port I can insert/install it.
Thanks in advance.
Br
Manvash
This question was solved.
View Solution.

Hi Erico, Thanks a lot!

Problem with Matrox Mini, NVIDIA GeForce GTX 570, Premiere 5.5.2 and After Effects CS5.5

Hello,
We have a couple video workstation PC's in our office.
Premiere and After Effects have been crashing lately with increasing frequency - about every two minutes now.
Here is the setup:
Hardware
Matrox Mini - Matrox Utility release 5.5.1
Nvidia GeForce GTX 570 - Driver release 275.33
Intel Xeon X5660 2.8 GHz processors
24 GB Ram
Software
Adobe CS5.5, specifically...
After Effects 10.5.0.253
Premiere 5.5.2
Windows 7 64-bit
We have two 21" LCD monitors in dual display running from the computer, and the Matrox Mini outputs a preview signal to a 15" CRT.
The crashes occur when I have After Effects and Premiere open at the same time. I am editing in a Matrox 720p29.97 timeline in Premiere. I imported several compositions from AE into Premiere through Dynamic Link and am matching audio with the animations in comps. When I switch back to AE to make an edit in the comp, After Effects generates a crash warning and then gives me the opportunity to save the project under a new name. After saving, it closes down completely. The Matrox WYSIWYG Control Panel in the system tray crashes during AE's crash, disabling the preview to the CRT from Premiere and AE. Since the Premiere sequence is a Matrox preset - in order to have output to the CRT - this freezes the timeline; the video and audio no longer play. When I save and then try to close Premiere, Premiere freezes and will not close without a force quit via the Task Manager.
In order to deal with this temporarily, I am editing in an AVCHD 720p30 sequence preset in Premiere, which doesn't send a preview feed to the CRT, obviously, since it's not a Matrox preset and the CRT is connected via the Matrox Mini. It's more than a minor inconvenience, since I use the CRT for color accuracy.
It is frustrating, since we did not have this problem until the recent CS5.5.2 update. We have tried changing drivers for the GTX 570 and changing the Matrox utility software to other versions, but no luck.
Is there a combination of GTX 570 drivers, Matrox software releases, and AE/Premiere settings that will make this work? I know there are "Known Issue" posts with Nvidia cards on Matrox's website, which include the GTX 570, but, again, this problem started with the Adobe CS5.5.2 update.
Any help here would be great, and I am willing to provide more information about the system and our crashes if it helps find a solution for the community, as I know this is not an isolated problem after reading Nvidia's, Matrox's, and Adobe's forums. I just can't find a hollistic solution on any of the individual manufacturer's forums.
Thank You.
Jordan

I've been running with Matrox for years, starting with the Axio LE. I do 75% broadcast work and find that the Matrox works very well with my kind of workflow. Monitoring is critical and since we have to deal with 3rd. party solutions, Matrox was my pick dating way back to 2006. Sure I've had frustrations with it, but I've made far more money off Matrox than frustration.
   Here's my nearly crash-free setup:
Gigabyte GZ-X58A-OC moboard
Intel 990X (only overclocking to 4.0)
24Gb of Kingston HyperX Ram
GTX580 Graphics Card
Matrox MXO2-LE w/Max
Crucial 240Gb Sata III drive (the one that has a nearly perfect score on Newegg's site)
2 x 2Tb WD Blacks Raid 0
2 x 1Tb WD Blacks Raid 0
Win 7 Ultimatte (it's a high-end version of Windows that's great for keying!)
CS5.5 Suite
Boris Red 5
Boris Continuum Complete 8
Trapcode Shine, Form, 3d Stroke, Starglow, and Particular
Optical Flares by Video CoPilot
   The reason I list all of that software, is that it all seems to get along together, including with Matrox! So, I can't say I highly endorse Matrox because I've never tried Black Magic or running an external monitor off of my video card.
    I use After Effects with all sorts of plug ins and rarely have crashes. If I put in a long day I'll have the usual crashes here and there (mainly with PremierePro), but nothing that has required evan a soft reboot of the computer.
   My frustration with Matrox is mainly the delay that often comes with Adobe coming out with a new release and Matrox taking 2 or 3 months to catch up, though when Adobe went from 5 to 5.5, there was no delay at all.
   I think that a lot of the people who trash Matrox probably haven't used a Matrox product in years. But before you listen to me, I must confess that I was an early adopter (and advocate) of SSDs and even today, many people on this forum think they're still a waste of money!
   I'll close by simply saying that I've not left Matrox after 5+ years, but keep in mind I haven't had the bad experiences that so many others seem to have had, but again, perhaps they had those bad experiences long ago.

Reg: Upgrading my graphics card to NVIDIA geforce GTX 760/780

Hi,
I am working with a Dell Precision work station 690 which currently uses a NVIDIA QUADRO FX 3450.. I want to upgrade this to a high end graphics card mostly NVIDIA Geforce GTX 760/780.. However , when I read the Specs for Dell Precision work station 690, it is mentioned that is support memory only till 512.. Are high end graphics card compatible with my PC? Will there be any power issues? I have an extra 6 pin cord from PSU on my PC.
--Thanks ,
Rama

Check if your chosen video card requires UEFI.
The GeForce GTX 960 failed in my Precision 690.
Windows 8.1 Pro 64 bit would not boot with this card.
I believe the issue is that this card requires a motherboard with UEFI which the 690 does not have.
Other posts report that the GeForce 750 Ti fails also because of lack of UEFI.
I found this site on Dell which says that the Radeon R9 280X will work in a 690:
http://accessories.dell.com/sna/productdetail.aspx?c=us&l=en&s=gen&sku=a7272920
Note in the above URL the requirement for a 1000W power supply. Some video cards require two (2) 6-pin or one (1) 6-pin and one (1) 8-pin connector from the power supply.
Hope this helps.
David

Mercury CUDA not enabling when using NVIDIA GeForce GTX 285 on Apple Mac Pro after Mavericks install

Been using the same setup since CS5 with the Mercury CUDA running perfectly. After recent upgrade of OS X to 10.9 Mercury CUDA is no longer available and only lets me run with the OpenGL or software options. Im using a NVIDIA GeForce GTX 285 for apple computers. Here are the results for the GPUSniffer program in the latest Premiere Pro 7.1.0 files. The LAST line make me chucle because it the first on the list of supported card in the "cuda_supported_cards.txt" file. Anybody else seen this?
--- OpenGL Info ---
Vendor: NVIDIA Corporation
Renderer: NVIDIA GeForce GTX 285 OpenGL Engine
OpenGL Version: 2.1 NVIDIA-8.18.27 310.40.05f01
GLSL Version: 1.20
Monitors: 1
Monitor 0 properties -
   Size: (0, 0, 1920, 1080)
   Max texture size: 8192
   Supports non-power of two: 1
   Shaders 444: 1
   Shaders 422: 1
   Shaders 420: 1
--- GPU Computation Info ---
Found 1 devices supporting GPU computation.
OpenCL Device 0 -
   Name: GeForce GTX 285
   Vendor: NVIDIA (Apple platform)
   Capability: 1.2
   Driver: 1
   Total Video Memory: 1024MB
   * Not enabled by default because it did not match the named list of cards.

found a link from a couple of days ago on a creative cow forum post one of the poster saying they are from adobe stating this
Re: Mercury Playback Engine MacPro
by Peter Garaway on Nov 12, 2013 at 9:49:16 am
Hi Wendell,
Sorry for the inconvenience. NVIDIA is currently working on drivers that support CUDA on Mavericks 10.9 with some of the older NVIDIA cards such as the GTX 285 and the Quadro 4800.
For others interested, the Quadro 4000, K5000 and GTX 680 ect... work with CUDA in 10.9.
Best,
Peter Garaway
Adobe
Premiere Pro
I have latest CUDA drivers, so i guess i am just waiting till a proper update that have the fixes to support my card.

MSi GE70 Apache Pro w/ nVidia GeForce GTX 860M Graphics Issues

Hi there,
I recently purchased an MSi gaming notebook with nVidia GTX 860M graphics. However, just recently I've been having game-breaking issues with textures rendering, artifacts and particles as well as the drivers crashing now and again(desktop flashing and flickering).
I've only had this laptop for just over two months and am quite disappointed with issues coming up already.
To get to the specifics; I have recently been playing through the Mass Effect trilogy and, just the other day, started up a file in Skyrim. The following screenshots show my biggest issues aside from the obviously serious driver crashing issues. I believe the issues started maybe a month into owning this laptop and since it has been getting progressively worse. I feel as though I have been all over the internet trying to find a fix to this, I've tried everything suggested, everything that I could think of, and I am just about ready to have it sent back. I was hoping someone may have some other options before I do send it in.
https://www.dropbox.com/s/d8koa8f8i1z9j3d/Photo%202014-09-30%2C%201%2040%2044%20AM.jpg?dl=0
On the title screen for Mass Effect 3 I get these consistent blue and red glowing orbs, they also occur on several other maps within gameplay.
https://www.dropbox.com/s/a9c47w320u5xylb/Photo%202014-09-30%2C%201%2043%2016%20AM.jpg?dl=0
Once I get in-game, this occurs everywhere. Textures "expanding" off of characters into random points.
https://www.dropbox.com/s/v37un4vespalosx/Photo%202014-09-30%2C%201%2045%2036%20AM.jpg?dl=0
This happens occassionally on characters; ridiculously shadowed faces to the point where they are barely recognisable.
https://www.dropbox.com/s/8cebgs4t10ghnh0/Photo%202014-09-30%2C%201%2046%2020%20AM.jpg?dl=0
On almost all wall textures there are white glowing particles like the ones behind the character here. In extreme cases, the wall becomes a texture of textures. All of the textures in the game are miniaturized into a wall of textures on certain objects.
I've also had signs and the game's menus and interface stretched and skewed all over the place. If I continue to play it with the above issues, the game eventually hangs and I have to alt+tab out and back in, or close it using the task manager. All of these issues also occur in Skyrim and any game using the same, or similar, engines. The only game I have been able to play almost seamlessly without any issues is Ragnarok Online 2, an online MMORPG.
I have tried the following:
nVidia's GeForce Control Panel: any and all combination of options.
Re-installing video drivers.
Re-installing DirectX and PhysX.
Formatting and a fresh install of Windows and all games and drivers.
Any other troubleshooting other forums have provided.
Removing the pagefile for virtual memory limits.
Using Intel HD graphics to test for other issues.
PC/nVidia power settings.
The one time I thought it may be fixed, all it took was me plugging in my laptop to cause the issues all over again. I've tried downloading MSi Afterburner to check GPU temperatures and I rarely even go over 65~70. I'm absolutely out of ideas. It was suggested to me by a family member that it may be a hardware issue, hence the consideration for sending it in.
I'm running Windows 7 64-bit
nVidia GeForce GTX 860M
Intel Core i7-4710HQ CPU @ 2.50GHz
12GB of RAM
Any ideas/help would be greatly appreciated. I would really rather not have to send it back. I've also posted this over at the nVidia forums because I'm -hoping- it's a software issue.
Thanks in advance!

Quote
It was suggested to me by a family member that it may be a hardware issue, hence the consideration for sending it in.
Quote
To me it sounds like a hardware issue (especially if you have rolled back to factory default and reinstalled from scratch)
It wouldn't be a hardware issue since you can play other games without problem.
Easiest way to tell if it's a hardware issue or not is to run the benchmark tool for example 3DMark 11 and see if the problem also happens during the benchmark.
For the rendering problem you were talking, please provide not only the problem picture but also the picture without problem to let us make the comparison.
I'm sorry to say, but some of the picture I'm not really getting what the problem you're talking about.
For the shadow face, here are few user provided fix which might be helpful.
http://forums.steampowered.com/forums/showthread.php?t=2282965
http://forum.bioware.com/topic/55984-shadows-way-too-darkblack-intendedscreenshot-solved/
Quote
Re-installing DirectX and PhysX.
NVIDIA moderator says some of the games is required to play some older Physx games, but not sure if it works.
If you would like to have a try.
https://forums.geforce.com/default/topic/524066/geforce-drivers/official-nvidia-r310-61-beta-display-driver-feedback-thread-released-11-20-12-/post/3714758/#3714758
I'd suggest to post the issue on EA, steam or obioware and see if there are people looking into it.

[BUG] Photoshop CC crashed immediately after selecting NVIDIA GeForce GTX 680M GPU

I just started using Photoshop CC trial and I immediately ran into problem with my video card.
First Photoshop doesn't recognized my GPU which is Nvidia GTX 680M. I'm using a new Alienware R4 with Win8 pro, I then searched the forum and followed this thread
Photoshop CS6 doesn't recognize my NVIDIA GeForce GTX 675M GPU?http://forums.adobe.com/thread/1157982
After following the instruction now Photoshop CC is supposely using my NVIDIA GPU, but it immediately crashed after launching, for both 32 bits and 64 bits. My NVIDIA driver version is 320.49 600 series, the latested one I just updated. If I deselect the NVIDIA option in the control panel I no longer suffer the crash problem but as you know there is a reported problem with Intel HD4000 integrated GPU where screen flickering keeps happening if you use a toolbox. To avoid the problem the only thing I can do is to deselect the use GPU option in CC option (changing the mode advanced setting doesn't help). By deselcting the GPU option get rid of the problem but there is another problem with zooming: it cannot zoom in real time anymore, instead it's having a toolbox where you choose a reagion and it will jump to that region, and I can only zoom in by doing this, not zooming out.
So basically I had a problem with NVIDIA which crashes CC immediately and a problem with Intel HD4000 integrated GPU with flickering screen and another problem with no GPU selected where I cannot zoom in real time. Whatever I do always give me some sets of problem that I can't solve.
BTW I haven't try CS6 yet, I may proceed to download a trial copy and I thought CC and CS6 are using the same core. Nevertheless, those problem should definately be looked into.
Any helps? Thanks in advance.

If you check that user's Profile, you'll discover it is not actually nVidia per se
Profile
Username:              Sora
Age:                       7 ¾
Favourite activity: Playing computer games
Spots:                    In abundance
Ambition:               To have a clue
For what it’s worth, I have most of the CC apps installed on an MSI GT70 ONE with GTX680M — driver 9.18.13.614 dated 8/28/2012 and using Windows 8, and while I have not used them all on that laptop, the ones I have appear to be working faultlessly.

HP Pavilion p6510f Desktop intermittent failures - Antec 25 430 WATT Power & NVIDIA GEFORCE GTX 650

After installing a new power supply and video card (Antec 25 430 WATT Power & NVIDIA GEFORCE GTX 650), my system became unstable. It worked fine for the first 3-4 hours then had a BSOD (blue screen of death) with kernel_data_inpage_error 0000007A and later a critical process failure 000000F4. I've done all of the tests listed on this page as well as removed and replaced the cmos battery:
http://www.faultwire.com/solutions-fatal_error/KERNEL-DATA-INPAGE-ERROR-0x0000007A-*1137.html
All of the tests passed and no problems were found and yet the system still fails after 3-4 hours of use.
So, I removed everything from my system and restored it to it's original settings. It seems to be back to normal now (but, we'll see for how long).
This experience has demoralized me. This is due to the fact that I've heard of others having difficulties trying to upgrade their systems. Seems like there is about a 50% success rate unless you know what works from past experience. I feel that the only way to get a system that has good graphics now is a well tested gaming box (PS3, XBOX, or Wii). Is there any recommended or possibly well tested setups for this type of system that could give me the quality of a GEFORCE GTX 650 without causing blue screens or cause instability for my computer?
Since this computer comes with ATI and AMD parts, I presume maybe getting an ATI or AMD graphics card would work? Regardless of the graphics card, the 250W power that comes with this system would most likely need to be replaced. Are there are any power supplys that you recommend or possibly tested?
I realize there are a few questions in this post, but I have one more. Are there any motherboard analysis tools to enusre nothing has gone wrong with the mother board? When the blue screens were occurring it seemed to make strange noises from the hard drive as it it were thrashing and after rebooting it would sometimes fail to recognize the existance of the hard drive as well. Since all of the hard drive tests were successful (I also ran SeaTools), this leads me to believe that the power is inssuficient, but I'm now fearful that if I upgrade the power it will only cause more problems.
A paying customer,
Zintage
This question was solved.
View Solution.

So, using the standard setup still makes strange noises at various intervals, but not as frequently. I have a bad feeling that it has caused disk drive problems based on the fact that:
1) Strange noises are now occuring during particular load times (although rarely)
2) Computer crashes (although, it no longer crashes now that I'm back in it's regular setup)
3) Occassionall it has really slow access times
These symptoms fall into the category of a failing drive based on the following site:
http://www.lifehack.org/articles/technology/how-to-tell-when-your-hard-drive-is-going-to-fail.html
I'm going to return the power supply and game card and look to investing in a new hard drive in case this one finally decides to go to valhalla.

AME CS5.5 Hanging at 75% & Drive Update for NVIDIA GeForce GTX-470

Hello,
I am having problems with AME CS5.5 hanging as well. I was wondering if somone from Adobe can tell me if the latest Driver upgrade for my NVIDIA GeForce GTX 470 card of 285.62 is safe/recomended for Adobe CS5.5 Premiere/AME/Encore/After Effects programs. I do not want to cause any additional issues with my Adobe related issues. My present driver is 280.26...Thanks, Steve

I installed the update after creating a restore point.
I guess it's safe, but the behavior is the same. I still have the hanging issue.
I hope that this bug gets fixed soon.,

Installing NVIDIA GeForce GTX 780 problem

Similar Messages

Maybe you are looking for