Installing NW Developer Studio on Windows 64bit

Hello,
Can the Developer Studio run on windows vista (64 bits)?
One of the requirements from the installation guide (Installation Guide ‒ SAP NetWeaver Developer Studio 7.1 SP3) is: "Microsoft Windows XP Professional SP2 (or higher)(32-bit)"
And there is a note regarding the 64 bit issue in the same installation guide: "SAP NetWeaver Developer Studio can be installed on a 32-bit platform only. "
Did anyone could run th developer studio on vista (64bits)? Is there a newer version that runs on vista (64bits)?
Regards

Hello Alexander
SAP Netweaver Developer Studio 2.0 and SAP Netweaver Developer Studio
7.0 and Enhancement Packages for SAP NetWeaver Developer Studio 7.0 are
available for the operating systems: Windows XP Prof. 32-bit and Windows
2000 Prof.
No other Platforms are supported. There is no support of additional
platforms like Windows Vista in future Enhancement Packages planned.
There are no plans to add platform support for Vista or Windows 7 to the
NWDS 7.0x line. Full focus is on 7.11, 7.2 and the next release,
where SAP will be supporting 3 different Windows versions plus 64-bit
support.
Thanks
Kenny

Similar Messages

  • SAP NetWeaver Developer Studio in Windows Vista 64bit?

    Can I install the SAP NetWeaver Developer Studio on Windows Vista 64 bit ?

    Hi MixMoraes
    If you use the trial version only NetWeaver Developer Studio works, the application server don't, because its only 32 bits.
    Regards
    Marcos

  • I have install the Developer Studio ,what's the next ?

    I install the Developer Studio on my computer.
    I need a remote server.
    how build a remote server?
    How can i set in the developer studio>windows>Preferences-->SAP J2EE Engine
    and how to set in the SAP application server?(ECC6).
    and how set the developer studio>windows>Perferences-->Web Dynpro.
    if i finish a web dynpro project in the Developer Studio, how can i deploy it to the SAP Application server?
    and how to test the application.
    where can i get the all the manual ?

    hi,
    in studio>windows>Preferences-->SAP J2EE Engine
    you give the WAS (web application server) path, you will gate them from below link..
    http://service.sap.com/instguides
    For All about NWDS
    the easiest way to download NWDS is in Service Marketplace , there go to the software download center (service.sap.com/swdc) and click on "Search for all Categories" on the left hand side. If you search for "Developer Studio" and then click on "SAP NW DEVELOPER STUDIO 2.0" in the results, you can navigate down and find the SP that you are looking for. SP18 is available now.
    or take a look here
    https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
    Download of SAP Netweaver Developer studio
    for binding , deploying and running your application :http://help.sap.com/saphelp_nw04s/helpdata/en/26/6e5a3e740be946e10000000a114084/frameset.htm
    Creating your first application:http://help.sap.com/saphelp_nw04s/helpdata/en/fd/ed32a8c9994b4ba4a1645a764814db/frameset.htm
    Sample tutorials on web dynpro for javahttps://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d [original link is broken]
    hope it helps
    regards

  • Installing Netweaver Developer Studio 7.1

    Hi All
    I have installed Netweaver Developer studio 7.1 (NWDS_platform) but when it is done it does give me most important features. I am not able to create any project like EJB and  EAP projects and on the Window -> Preferences I can't fine JAVA and some other options.
    Below are the only opotion I have on my Windon-> Preferences:
    -General
    -Help
    -Install/Update
    -Run/Debug
    -Team
    What must I do to get those other options

    Hi
    Thanks a lot for a quick reply I have tried to install the updates from these two sites.
    --https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710/site.xml     
    --https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710/policy.xml     
    This is an error I m getting.
    "No features found on the selected site(s) choose the diferent site or site category"
    One question do i have to install the Sap Netweaver CE7.1_SR3... to run this Developer Studio coz I just downlaoded  the Dev Studio 7.1 and I am running it on my machine. but I am using JDK 6 not 5 will that be a problem.
    Yonela

  • WebDynpro for beginners - Installing Netweaver Developer Studio

    Hi,
    I am new SAP technology and I want to start with WebDynpro for JAVA. I have basics in Java and don't know anything about SAP, ABAP etc.
    I was going through webdynpro tutorials and It is mentioned that to develop applications we need to install Netweaver Developer Studio. But I am not able to locate it in the portal, SDN.
    If anybody can let me know how can I install, it will be of great help.
    Also Please let me know, a better way to start with WebDynpro.
    Thanks a lot,
    Anand

    Hi Anand,
    Go through this link to downlaod the NWDS.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloads">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloads</a>
    and to know more about the Webdynpro check the following link:
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/15/0d4f21c17c8044af4868130e9fea07/frameset.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/15/0d4f21c17c8044af4868130e9fea07/frameset.htm</a>
    Regards,
    Jhansi

  • Install NW Developer Studio. Error:SDK Folder not found!?

    Hi All,
    I installed Java EE5 SDK(with JDK) and now want to install NW Developer Studio 2.0. The wizard ask for the Java SDK folder path and when I enter it gives an error message "JAVA SDK folder not found".
    I used this "path C:\Program Files\Java\Sun\SDK"
    Can anyone help ?
    Best Regards,
    Kushi

    Hi Kushi,
    NWDS 2.0 is released with SAP NetWeaver 2004 which runs on JDK 1.4. Another reason for this issue might be the space in the path "C:\Program Files\Java\Sun\SDK".
    Please install JDK 1.4 into a path without spaces and try again.
    Hope it helps!
    -Vladimir
    PS. Your question does not seem related to the Java EE 5 Edition of SAP NetWeaver, so I'm moving this thread to the NetWeaver AS Java forum.

  • SAP NetWeaver Developer Studio - preferences window doesn't appear any more

    Hi,
    I've installed SAP NetWeaver Developer Studio  7.0.14 on my PC and it was working fine for one month. Today, when I opened the developer studio and tried to navigate to the preferences in window menu item but it didn't pop up. Also, I tried to open the navigator tab of the Web Dynpro perspective to browse through the project files but it showed nothing except this message:   An error has occured when creating this view.
    I think there is a problem with the build path of the developer studio.
    Any help?

    This problem is not only happen in my laptop, it happens to my collegue too ...(we both are suing SP15).
    Although I open through the "Start" --> "SAP Netweaver Studio", it generate more than one SAPIde.exe.
    I reinstall the studio, but same problem persist.
    The only thing is, this problem start after I install a local portal in my system (that is why I think it maybe the CPU or memory problem....but my collegue has no portal installed in his system)
    I will check whether it is the multiple JRE probelms.
    Thanks.
    I assigned points to you.
    Kent

  • How to install NW developer studio (JIDE18_0-10002804.SAR)

    Hi all!
    I want to install Sap Netweaver Developer Studio, so i was advised to download the file "JIDE18_0-10002804.SAR" from SAP Service Market Place.
    The problem is that this file is a ".SAR", and i don't know how to launch the installation.
    So, pieces of advice or a different way of installation are welcomed.
    Thanks in advance.
    Laosine

    Hi,
    Please download the SAPCAR (SAP Extraction Tool for CAR and SAR files) via the following link using your OSS UID
    https://smpdl.sap-ag.de/~swdc/012002523100001378452006D/SAPCAR_0-10003694.exe?_ACTION=DL_DIRECT
    rename the file SAPCAR_0-10003694.exe to SAPCAR.exe and put in under windows\system32 to be able to use it everywhere.
    Then open a command prompt and navigate to the directory where JIDE18_0-10002804.SAR is located.
    extract the archive via the following command;
    sapcar -xvf JIDE18_0-10002804.SAR
    it will create a dir and under it (J2EE-RUNT-CD\IDE) execute the IDE70setup.exe SETUP Program.
    thats it!

  • Install oracle 10g (32bits) on windows (64bits)

    hi,
    Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
    Thanks

    hi,
    Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
    Thanks

  • Error when installing NetWeaver Developer Studio 7

    Hi,
    I am having problems installing the NetWeaver Developer Studio 7.0.0. which comes bundled with the SAP NetWeaver 7.0 - Trial Version on Linux. To initiate installation, i double-clicked on the IDE70Setup file located in the client/IDE folder. I filled in the options presented by the wizard and installation proceeded. However halfway it terminated abruptly, and displayed an error message as shown below:
    Missing file: 'C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.java.ide_7.0.0\plugin_customization.ini'.
    Has anybody who encountered this problem before help me out? Any help would be greatly appreciated. Thanks!

    Hi
    Thanks a lot for a quick reply I have tried to install the updates from these two sites.
    --https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710/site.xml     
    --https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710/policy.xml     
    This is an error I m getting.
    "No features found on the selected site(s) choose the diferent site or site category"
    One question do i have to install the Sap Netweaver CE7.1_SR3... to run this Developer Studio coz I just downlaoded  the Dev Studio 7.1 and I am running it on my machine. but I am using JDK 6 not 5 will that be a problem.
    Yonela

  • Installation SAP NetWeaver Developer Studio X Windows VISTA

    Hi,
    I'm about to buy a Win VISTA licence desktop and before decide for this OS I want to be sure that the SAP NetWeaver Developer Studio is completely compatible with.
    There is any documentation about this ?
    I've checked some docs, but they only refer to Win 2k and Win XP.
    Kind regards,
    Eduardo Arantes

    Hello Marlo,
    I had the same issue with RFC models in NWDS on Windows Vista. Fortunately I was able to find a simple solution which you find here: Re: Can't create model in Web Dynpro. Basically this solution lets NWDS think it is running on XP.
    I've worked with NWDS (version 2004s, SP 14) on Vista for more than 3 months now and I haven't encountered any other issues, except for some general bugs...
    Regards,
    Hans de Boer

  • Install Netweaver Developer Studio

    How and where would I download SAP Netweaver Developer Studio?  I went to the service marketplace, but I can only find Service Packs there.....

    You can have the NWDS @ service.sap.com/swdc--->>Entry by application group -->
    SAP NETWEAVER >SAP NETWEAVER 7.0> Entry by Component -->Developer Studio
    NW DEVELOPER STUDIO 7.00
    Thank you,
    Shyam

  • How can i install forms developer 6i in windows XP

    i have downloaded "Oracle Forms Developer/Services 6i Release 2 for Windows NT" but cannot run the file in my PC which using XP. Could anyone tell me is it possible to install in XP??
    many thanks

    Richard,
    say it this way: It is our goal to have it in patch 13 and only bad luck will stop us from having it there. So it looks promising right now. If patch 13 has the XP certification, then this will be in appr. 10 weeks.
    Frank

  • Installing SQLServer Management Studio 2012 - Windows 8.1

    I've tried several download sources trying to get a DB instance installed (works fine), however, getting an executable SSMS eludes me.  Saw lots of explanations of how to install it; they don't end up producing a tool I can run.  Anyone with
    either a link that will work, or the caveat I need to follow to get functional SSMS on Windows 8.1 would be appreciated.

    First please give information about what version of SQL Server SSMS you are trying to install. Again you did not give any information about error ? Unless you give complete information it would be difficult for us to provide you correct answer.
    Please edit your question and add more information
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Problems Installing Netweaver Developer Studio 7.0 SP 15

    Hello friends,
    I have currently NWDS 7.0 SP9 installed. I need to install NWDS 7.0 SP15. For that I have downloaded the JIDE15_0-10003480.SAR file from Service Market place. I don't know what to do after that.
    Please can anyone help me on this.
    Points guaranteed.
    Thank You
    Avik

    Hi,
    SAPCAR is a executable. you can find it in \usr\sap\<SID>SYS\exe\run.
    You can execute the "sapcar -xvf <filename>.car"
    Note:
    Using JSPM we can deploy the sar file.
    For JSPM , no need to uncar the file. It will directly uncar and deploy it.
    Try with JSPM to deploy the SAR file.
    Regards,
    Bala.

Maybe you are looking for

  • Report generation VIs in Labview 6.1

    Hello, I am havinf problems with using Labview 6.1 VIs for report generations. The VIs provided by Labview are not executable! It seems as if they had internal errors, non fixed errors. Moreover, I am not able to open the diagram because it is passwo

  • Computer shutting down after recent Lion install

    After a period of non activity, my computer now goes into complete shutdown as opposed to 'sleep'

  • How To use External Message To Send IDOC From XI To R/3

    we need to split one source message to several IDOC To R/3,But Standard Imported r/3 idoc contains only one idoc per message,so we export the standart idoc to a xsd file and change it to a  multi "IDOC" segment structure and import back to xi again,a

  • Acrobat XI wont run.

    I installed Acrobat XI as part of my CreativeCloud account. When I tried to run it, it froze on a blank license agreement pop-up. I retried several times with the same results. I used the uninstaller in the Acrobat XI Pro folder to remove it. I want

  • I have A powerbook G4 it come on to the Apple logo then does nothing else

    I have a powerBook G4 the screen come on to the Apple logo then thats all it does ?