Installing OBIEE 11.1.1.7 on existing EPM 11.1.2.3
hello expert
I've sucessfully create a fresh install of epm suite 11.1.2.3 (planning,hpcm,hfm) on my virtual machine now I want install OBIEE 11.1.1.7
I need suggestion about how to install obiee on the same machine...
1) I need a new weblogic instance on a different port or I can re-use same instance (EPMSystem, running on 7001 port)?
2) I have to install another essbase/studio/easServer/workspace or I can re-use the existing?
Thanks in advance
Nic
If you want to run the EPM weblogic admin server and OBIEE at the same time then you would need for them to run on different ports.
You don't have to select the essbase option when installing OBIEE if you have already installed the essbase products.
I would install OBIEE to a different middleware home than EPM and keep the weblogic domains separate.
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
Installing obiee 11.1.1.7 hangs in start bi_server1
Hi,
I am struck in this installation, i have installed the software, while configuring obiee instance, its hangs in starting Managed servers : bi_server1
Done
Stopping Derby Server...
Starting AdminServer
Starting the domain ...
progress in calculate progress1
Executing Task: Starting Managed Server: bi_server1
oracle.as.install.bi.wls.ServerLifeCycleException: Failed to achieve state RUNNING in 3600seconds. The server is currently in state STARTING
at oracle.as.install.bi.wls.ServerLifeCycle.waitForManagedWLSServerState(ServerLifeCycle.java:119)
at oracle.as.install.bi.wls.ServerLifeCycle.startServerSynchronous(ServerLifeCycle.java:59)
at oracle.as.install.bi.biconfig.standard.StartStopManagedServer.doExecute(StartStopManagedServer.java:55)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Also i have found this error in AdminServer.log
####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992884> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992885> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992886> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992887> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992887> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992889> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992890> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992892> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992893> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Jun 23, 2013 9:09:52 PM IST> <Info> <WebLogicServer> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992896> <BEA-000307> <Exportable key maximum lifespan set to 500 uses.>
####<Jun 23, 2013 9:20:48 PM IST> <Error> <WebLogicServer> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-000000000000001c> <1372002648290> <BEA-000337> <[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "656" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@14b0b657", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-15 "[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, priority=1, DAEMON> {
jrockit.net.SocketNativeIO.readBytesPinned(SocketNativeIO.java:???)
jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:24)
java.net.SocketInputStream.socketRead0(SocketInputStream.java:???)
java.net.SocketInputStream.read(SocketInputStream.java:107)
weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:149)
java.io.InputStream.read(InputStream.java:85)
com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
com.certicom.tls.record.ReadHandler.read(Unknown Source)
^-- Holding lock: com.certicom.tls.record.ReadHandler@14a90002[thin lock]
com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:250)
sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:289)
sun.nio.cs.StreamDecoder.read(StreamDecoder.java:125)
^-- Holding lock: java.io.InputStreamReader@14a91265[thin lock]
java.io.InputStreamReader.read(InputStreamReader.java:167)
java.io.BufferedReader.fill(BufferedReader.java:105)
java.io.BufferedReader.readLine(BufferedReader.java:288)
^-- Holding lock: java.io.InputStreamReader@14a91265[thin lock]
java.io.BufferedReader.readLine(BufferedReader.java:362)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:94)
^-- Holding lock: weblogic.nodemanager.client.SSLClient@14b0b51f[thin lock]
weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:45)
weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:203)
weblogic.work.ExecuteThread.run(ExecuteThread.java:170)
>
####<Jun 23, 2013 9:20:48 PM IST> <Notice> <Diagnostics> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-000000000000001d> <1372002648300> <BEA-320068> <Watch 'StuckThread' with severity 'Notice' on server 'AdminServer' has triggered at Jun 23, 2013 9:20:48 PM IST. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-000337') OR (MSGID = 'BEA-000337'))
WatchData: DATE = Jun 23, 2013 9:20:48 PM IST SERVER = AdminServer MESSAGE = [STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "656" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@14b0b657", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-15 "[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, priority=1, DAEMON> {
jrockit.net.SocketNativeIO.readBytesPinned(SocketNativeIO.java:???)
jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:24)
java.net.SocketInputStream.socketRead0(SocketInputStream.java:???)
java.net.SocketInputStream.read(SocketInputStream.java:107)
weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:149)
java.io.InputStream.read(InputStream.java:85)
com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
com.certicom.tls.record.ReadHandler.read(Unknown Source)
^-- Holding lock: com.certicom.tls.record.ReadHandler@14a90002[thin lock]
com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:250)
sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:289)
sun.nio.cs.StreamDecoder.read(StreamDecoder.java:125)
^-- Holding lock: java.io.InputStreamReader@14a91265[thin lock]
java.io.InputStreamReader.read(InputStreamReader.java:167)
java.io.BufferedReader.fill(BufferedReader.java:105)
java.io.BufferedReader.readLine(BufferedReader.java:288)
^-- Holding lock: java.io.InputStreamReader@14a91265[thin lock]
java.io.BufferedReader.readLine(BufferedReader.java:362)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:94)
^-- Holding lock: weblogic.nodemanager.client.SSLClient@14b0b51f[thin lock]
weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:45)
weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:203)
weblogic.work.ExecuteThread.run(ExecuteThread.java:170)
SUBSYSTEM = WebLogicServer USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-000337 MACHINE = obiee.prod.com TXID = CONTEXTID = d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-000000000000001c TIMESTAMP = 1372002648290
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 600000
>
####<Jun 23, 2013 9:21:48 PM IST> <Error> <WebLogicServer> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-000000000000001f> <1372002708299> <BEA-000337> <[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "716" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@14b0b657", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-15 "[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, priority=1, DAEMON> {
jrockit.net.SocketNativeIO.readBytesPinned(SocketNativeIO.java:???)
jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:24)
java.net.SocketInputStream.socketRead0(SocketInputStream.java:???)
java.net.SocketInputStream.read(SocketInputStream.java:107)
weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:149)
java.io.InputStream.read(InputStream.java:85)
com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
com.certicom.tls.record.ReadHandler.read(Unknown Source)
^-- Holding lock: com.certicom.tls.record.ReadHandler@14a90002[thin lock]
com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:250)
sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:289)
sun.nio.cs.StreamDecoder.read(StreamDecoder.java:125)
^-- Holding lock: java.io.InputStreamReader@14a91265[thin lock]
java.io.InputStreamReader.read(InputStreamReader.java:167)
java.io.BufferedReader.fill(BufferedReader.java:105)
java.io.BufferedReader.readLine(BufferedReader.java:288)
^-- Holding lock: java.io.InputStreamReader@14a91265[thin lock]
java.io.BufferedReader.readLine(BufferedReader.java:362)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:94)
^-- Holding lock: weblogic.nodemanager.client.SSLClient@14b0b51f[thin lock]
weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:45)
weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:203)
weblogic.work.ExecuteThread.run(ExecuteThread.java:170)
>
####<Jun 23, 2013 9:23:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000020> <1372002817371> <BEA-001128> <Connection for pool "mds-owsm" closed.>
####<Jun 23, 2013 9:23:38 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372002818247> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
####<Jun 23, 2013 9:38:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000029> <1372003717357> <BEA-001128> <Connection for pool "mds-owsm" closed.>
####<Jun 23, 2013 9:38:38 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372003718551> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
####<Jun 23, 2013 9:53:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000036> <1372004617391> <BEA-001128> <Connection for pool "mds-owsm" closed.>
####<Jun 23, 2013 9:53:38 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372004618870> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
####<Jun 23, 2013 10:08:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-000000000000003f> <1372005517356> <BEA-001128> <Connection for pool "mds-owsm" closed.>
####<Jun 23, 2013 10:08:39 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372005519176> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
####<Jun 23, 2013 10:23:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-000000000000004c> <1372006417363> <BEA-001128> <Connection for pool "mds-owsm" closed.>
####<Jun 23, 2013 10:23:39 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372006419447> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
####<Jun 23, 2013 10:38:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000055> <1372007317361> <BEA-001128> <Connection for pool "mds-owsm" closed.>
####<Jun 23, 2013 10:38:39 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372007319778> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
####<Jun 23, 2013 10:53:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000062> <1372008217362> <BEA-001128> <Connection for pool "mds-owsm" closed.>
####<Jun 23, 2013 10:53:40 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372008220313> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
Where to look for the errors
Please help, i have searched everywhere, there are no solutions for this.
Advanced thanksIf you want to run the EPM weblogic admin server and OBIEE at the same time then you would need for them to run on different ports.
You don't have to select the essbase option when installing OBIEE if you have already installed the essbase products.
I would install OBIEE to a different middleware home than EPM and keep the weblogic domains separate.
Cheers
John
http://john-goodwin.blogspot.com/ -
Unable to install essabse11.1.2.1.0 on existing weblogic instance on linux
I am trying to install essabse11.1.2.1.0 on existing weblogic instance on linux.
I installed essabse on the same middleware home whare existing weblogic server configured(for OBIEE) Here I am unable to install and configure the weblogic,
any suggitions how to install and configure essabse on the same weblogic instance?
Here are some conflicting statements from oracle,Essabse installation guide 11.1.2.1 below.. I am confused to move forward any suggitions?
1.If you are installing on the same machine on which Oracle Business Intelligence Enterprise
Edition or Oracle Business Intelligence Publisher are installed, install into two different
Middleware homes. The products rely on different releases of Fusion Middleware.
2.Typically, EPM System Installer installs WebLogic Server for you. If you have an existing
WebLogic Server installation and want to use it instead of the WebLogic Server installed by
EPM System Installer, note the Middleware home location for the WebLogic Server
installation. During installation, you must install EPM System products to this same
Middleware home. If EPM System Installer detects an existing WebLogic Server installation
in the installation location, it does not install WebLogic Server.I had problems when I tried to install both products to the same middleware home, for simplicity I ended up just installing to separate locations.
I am sure it can be done but I don't think it is so straight forward, hopefully one day the products will link up in a cleaner way. Saying that I only really tried once and maybe I should spent much more time investigating whether it is possible.
Cheers
John
http://john-goodwin.blogspot.com/ -
Hi,
Can anyone help me out in one installation error I am facing while Installing OBIEE.
The error states SID already exists
Thanks
ShashankHi User,
Can you give us more information about this error like at what stage of installation you are getting this error etc..
You can also refer to http://123obi.com/2011/01/obiee-11g-installation-on-windows7-64-bits-part1/
The above link is to install on 64bit OS, but following the same steps on 32 bit OS will work.
Cheers,
Kalyan
http://123obi.com -
Creating ASInstance Failed Error: Installing OBIEE 11.1.1.5.0 Windows7 64b
Hi
I am trying to install OBIEE 11g 11.1.1.5.0 using OracleXE112_Win32 db on a Windows 7 Home Premium 64 bit machine and was getting an error at 16% of Configuration Procress.
Error - Creating ASInstance Failed.
I went to see the logs. Please Help. I did edit the etc/hosts file from 127.0.0.1 host to the physical IP address before the start of the installation of 11.1.1.5.
Log :
INFO: Environment Variables:
INFO: ORACLE_HOME =
INFO: PATH = C:\OraHome_1\oracledq\tsq11r5s\Software;c:\obiee11g_home\Oracle_BI1\products\Essbase\EssbaseServer\bin;c:\obiee11g_home\Oracle_BI1\bin;c:\obiee11g_home\Oracle_BI1\opmn\bin;c:\obiee11g_home\Oracle_BI1\opmn\lib;c:\obiee11g_home\Oracle_BI1\perl\bin
INFO: CLASSPATH =
INFO: Username:sears
INFO: Saving the install inventory which has the access of 1
INFO: The flags set for this home (c:\obiee11g_home\oracle_common) are:aruID|aruDesc|guid|addedToCI
INFO: The flags set for this home (c:\obiee11g_home\Oracle_BI1) are:aruID|aruDesc|guid|addedToCI
INFO: Updating XML inventory.
INFO: Current Inventory:
Oracle Home: OH1442618306
This Oracle Home has not been changed in this session.
Oracle Home: OH1651377289
This Oracle Home has not been changed in this session.
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
ThanksI did provide different instance, still it fails. Here is the log:
progress in calculate progress2
Executing Task: Restarting AdminServer
AdminServer port is 7001
trying to connect to sears-PC 7001
Successful
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to sears-PC 7001
Successfully connected to the Domain Runtime ...
trying to connect to sears-PC 7001
Successful
MBean Server Connection is :javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection@6c0f0397
Stopping AdminServer
Stopping the domain ...
ASDomain.getMBeanServerConnection ...
ASDomain.getMBeanServerConnection ...
SVR_GRP =
Stopping Weblogic Server...
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://sears-PC:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'bifoundation_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Shutting down the server AdminServer with force=false while connected to AdminServer ...
WLST lost connection to the WebLogic Server that you were
connected to, this may happen if the server was shutdown or
partitioned. You will have to re-connect to the server once the
server is available.
Disconnected from weblogic server: AdminServer
Disconnected from weblogic server:
Exiting WebLogic Scripting Tool.
Done
Stopping Derby Server...
Starting AdminServer
Starting the domain ...
LOADING DLL : c:\obiee11g\Oracle_BI1\install\config\\StartUtil64.dll
DEBUG : Loading DLL : c:\obiee11g\Oracle_BI1\install\config\\StartUtil64.dll
DEBUG : Loaded DLL : c:\obiee11g\Oracle_BI1\install\config\\StartUtil64.dll
progress in calculate progress2
Executing Task: Provisioning Core Security Artifacts
progress in calculate progress2
Executing Task: Creating ASInstance
Trying to assign 3 consecutive ports where the starting port range is: 9500 - 10000
AdminServer port is 7001
trying to connect to sears-PC 7001
Successful
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to sears-PC 7001
Successfully connected to the Domain Runtime ...
trying to connect to sears-PC 7001
Successful
MBean Server Connection is :javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection@28d64991
sears-PC 7001
weblogic.Deployer invoked with options: -adminurl sears-PC:7001 -username weblogic -name NonJ2EEManagement -source C:\obiee11g\Oracle_BI1\opmn\applications\NonJ2EEManagement.ear -nostage -deploy -upload -noexit
<Jul 16, 2012 8:52:13 AM PDT> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, NonJ2EEManagement [archive: C:\obiee11g\Oracle_BI1\opmn\applications\NonJ2EEManagement.ear], to configured targets.>
Task 0 initiated: [Deployer:149026]deploy application NonJ2EEManagement on AdminServer.
Task 0 completed: [Deployer:149026]deploy application NonJ2EEManagement on AdminServer.
Target state: deploy completed on Server AdminServer
opmnctl start: failed.
Can not resolve sears-PC for interface any
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.engine.CfgWorkflowException
at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:178)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASInstance instance1.
Cause:
An internal operation has failed: Error in starting opmn server
Operation aborted because of a system call failure or internal error
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
... 18 more
Caused by: oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
... 19 more -
Installing OBIEE on Windows 7, quick questions
Dear Experts,
Last year, I struggled installing OBIEE on Linux 5.5.
Now I want to install it on Windows 7 Ultimate.
It will be stand alone, for my own use only.
Both a client, and a server.
Some quick questions:
1)
Does the Windows server need to have a Domain (as Linux did)?
(I'm having some trouble with the same dummy domain that worked fine
in Linux, since it doesn't exist on the web.)
2)
Does the Windows server/client require a loopback adapter?
If so, does it require a static IP?
3)
Does the windows server/client require a static IP address?
4)
If static IP addresses are required for both 2 and 3,
is the static IP address supposed to match, or be different?
I hope these questions aren't too dumb. But I haven't found
anything online addressing them for windows yet.
Thanks a lot!Hi,
1)
Does the Windows server need to have a Domain (as Linux did)?
(I'm having some trouble with the same dummy domain that worked fine
in Linux, since it doesn't exist on the web.)
A. Not required.
2)
Does the Windows server/client require a loopback adapter?
If so, does it require a static IP?
A. Yes it is require for Loopback adapter and static ip for installation -- Client installation is not required -- You can go for Simple installation in your laptop.
3)
Does the windows server/client require a static IP address?
A. Yes
4)
If static IP addresses are required for both 2 and 3,
is the static IP address supposed to match, or be different?
A.
Please refer my blog.
http://satyaobieesolutions.blogspot.in/2012/06/obiee-11.html
Please verify the below steps.
1. Please check whether are download 64 bit software or not.
2. First you have to install jrockit-jdk1.6.0_31-r28.2.3-4.1.0
3. before installing software you have to give full permissions to everyone on your installation location drive (C drive or D drive).
4.Create Looppack Adapter.
5. Database installation 11g 64 bit.
6. RCU 32 bit
7. OBIEE 11.1.1.6 64 bit
Hope this help's
Thanks,
Satya -
Fail installing OBIEE 11g on Oracle Linux 5 64 bits
Hello,
I am trying to install OBIEE 11g over Oracle Linux 5 (64 bits), but I can't. I have the following issue:
INST-07008: Validation of Oracle Home location failed. User does not have permission to create home/instance location
INST-07282: Specified Middleware home location does not exist
In the Oracle Middleware Home, I have specified "/root/Oracle/Middleware".
I have following these steps:
1) Install Oracle DB 11g R2 (OK)
2) Install jdk for Linux 64 bits (OK)
3) Install weblogic
I have done the installation as "root" user
Middleware Home Directory = /root/oracle/Middleware (OK)
4) Install RCU as root (OK)
5) Install OBI 11g
To execute ./runInstaller it is necessary be as oracle user.
I have changed permissions in /root/Oracle/Middleware (chmod 777), but the issue is the same.
I appreciate any idea to solve the issue.
Thank you in advance.
Regards,
Monica.Hello,
no, I have installed OBIEE as oracle user with software only option, with root isn't possible.
So, I don't know if it is necessary I installed WebLogic as oracle user to have permission in middleware path...
Regards. -
How to install Small Business Server 2008 in an existing Active Directory domain
It is shown on this page:
http://support.microsoft.com/kb/884453, "How to install Small Business Server 2003 in an existing Active Directory domain".
Is it possible to do this with SBS2008 ?
If "YES", are there any published information about the procedure ?Yes, it is. Thank you very much.
But there is something that confuses me - I want to migrate from Win2003Std to SBS2008. And also, I want to keep the existing Win2003Std as a second DC for a long time.
But it is written in the shown article:
... After the migration is finished, you must remove the Source Server from the network within 21 days. ...
Is this rule mandatory for the scenarios where the Source Server is Std, not SBS ? As I know, I can have more than one DC(Win2003Std/Win2008Std) together with SBS2003. But what about SBS2008 ? -
Hi,
I am installing OBIEE on my system and getting an error saying framedyn.dll was not found.
After which it is saying that OBIEE is not supported with my current Windows version.
But I checked my Windows version of XP is uptodate.
Can you please help me to install OBIEE with above problem description.
Please let me know if any further clearification regarding my problem is required.
Thanks
ShashankHi Shashank,
Have you checked if framedyn.dll is missing in your system (the file should be under Windows/system32)? If so, you can download the file and try again. Also, not sure what version of OBIEE you're trying to install. If not the latest one (10.1.3.4.1) you can download it from OTN and try with it. Also {thread:id=966344} might be helpful for you. -
Unable to install obiee 11.1.1.5.0 on windows xp 32 bit machine DHCP=yes
OBIEE 11g installation failing on step 13 "Executing: opmnctl start coreapplication_obips1 failed".
I've installed a loopback adapter with IP 10.10.10.10 and subnet mask 255.255.255.0 and other entries blank. my Host file entries are like this:
127.0.0.1 localhost
10.10.10.10 L911093.corp.abcd.com L911093
I've used 192.168.100.100 IP for loopback adapter but the same problem is coming.
Thanks in advanceHi,
try to start manually by using opmnctl command...it shoud work if its not working try below steps
Method:1
While installing obiee11g keep it OPMN service type as "Manual" then install and confure it should work.
Method:2
Some installation issues can be caused by this known issue with your Windows configuration. Please review the OBI EE 11g Release Notes document : -
Section 53.2.8 Oracle BI Installer Stops at Administrator User Details Screen
configure a loopback adapter :
http://download.oracle.com/docs/cd/E14571_01/relnotes.1111/e10132/biee.htm#CACEFIAG
Refer for more:
Error: "Executing Opmnctl Start Coreapplication_obiccs1 Failed" When Installing OBIEE 11g [ID 1211149.1]
Thanks
Deva -
Error while Installing the Java Add-In for an Existing ABAP System
Hi all,
I need help, i am Installing the Java Add-In for an Existing ABAP System
SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
These are the last few lines on the sapinst.log.
INFO 2009-05-21 12:35:12
Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:18
Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:19
Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc\tbx.
INFO 2009-05-21 12:35:21
Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
INFO 2009-05-21 12:35:22
Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
INFO 2009-05-21 12:35:23
Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
FCO-00011 The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
Thanks in advance for any help.
Kiran ChebroluHi,
Hope this note would solve your issue, please read carefully and validate with your issue
Note 1032019 - Java Add-In: Error when you create the SCS instance
below notes give your suffice information.
Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
Note 1025789 - RUNR3CMD generates CPF0006
regards
nag -
Error during configuration process while installing obiee 11.1.1.7.0 in windows server 2012
HI..
I'm having an issue while installing obiee 11g(11.1.1.7.0) in windows server 2012 and using the database as ms sql server 2008. During configuration process after the installation process is completed , here the process is stopped at "Step:executing opmnctl start configuration_obisch1" status "failed"
Here is the error:
Error
opmnctl task failed
Step Executing: opmnctl start coreapplication_obisch1 failed
Configuration Action "Executing opmnctl start coreapplication_obisch1 " has failed. please check log files...
any help would be great
thanks..Friend,
Installer file size is:
Size: *1.23 GB (1,323,085,837 bytes).*
Size on disk: *1.23 GB (1,323,089,920 bytes).*
I tested also disabling antivirus on my PC and disconnect the power cord before starting the installation of JDeveloper. In both tests the result was the same.
Some additional recommendations to solve this case.
Thank you for supporting.
Edited by: Luis_vkacito on Nov 15, 2012 6:48 AM -
Creating Domain step fails while trying to install OBIEE 11g (11.1.1.5)
Hi Everyone,
I am really stuck at a point from where I do not know which route to take. I am trying to install OBIEE 11g (11.1.1.5) on my Windows 7 (32-bit) laptop. I have tried all the options:
1. Simple Install
2. Enterprise Install
3. Software only install (after installing Weblogic 10.3.4.0 separately)
Everything goes well till the step Bi Configuration->Creating Domain.
In this process whenever it reaches the stage when it tries to start Node Manager, it starts getting java exceptions and fails. It typically occurs when it does not find the nodemanager.properties file and tries to save the configurations there. It then encounters a Fatal Error.
Excerpt from install2011-07-29_06-13-21PM.out
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Launching NodeManager ...
Properties: {ListenPort=5556,NativeVersionEnabled=true,NodeManagerHome=C:/FusionMW/wlserver_10.3/common/nodemanager,StartScriptEnabled=true,}
Command: C:\FusionMW\JROCKI~1.2-4\jre\bin\javaw.exe -classpath "C:\FusionMW\JROCKI~1.2-4\jre\lib\rt.jar;C:\FusionMW\JROCKI~1.2-4\jre\lib\i18n.jar;C:\FusionMW\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\FusionMW\JROCKI~1.2-4\lib\tools.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic.jar;C:\FusionMW\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\FusionMW\WLSERV~1.3\server\lib\webservices.jar;C:\FusionMW\modules\ORGAPA~1.1\lib\ant-all.jar;C:\FusionMW\modules\NETSFA~1.0_1\lib\ant-contrib.jar;C:\Users\SUCHAT~1\AppData\Local\Temp\.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip;C:\FusionMW\utils\config\10.3\config-launch.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbytools.jar" weblogic.NodeManager "-v"
NMProcess: <Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
NMProcess: Jul 29, 2011 7:21:31 PM weblogic.nodemanager.server.NMServerConfig initDomainsMap
NMProcess: INFO: Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains
NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig
NMProcess: INFO: Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true
NMProcess: <Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
NMProcess: WARNING: Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.
NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
NMProcess: INFO: Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'
NMProcess: <Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
NMProcess: java.lang.NullPointerException
NMProcess: at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess: at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess: at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess: at weblogic.NodeManager.main(NodeManager.java:31)
NMProcess:
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer main
NMProcess: SEVERE: Fatal error in node manager server
NMProcess: java.lang.NullPointerException
NMProcess: at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess: at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess: at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess: at weblogic.NodeManager.main(NodeManager.java:31)
NMProcess: Stopped draining NMProcess
NMProcess: Stopped draining NMProcess
Successfully launched the Node Manager.
The Node Manager process is running independent of the WLST process.
Exiting WLST will not stop the Node Manager process. Please refer
to the Node Manager logs for more information.
The Node Manager logs will be under C:\FusionMW\wlserver_10.3\common\nodemanager
Node Manager starting in the background
Excerpt from nodemanager.log which is created at <WL_HOME>\common\nodemanager:
<Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
<Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
<Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
<Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
<Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
java.lang.NullPointerException
at java.util.Hashtable.containsKey(Hashtable.java:314)
at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
at weblogic.NodeManager.main(NodeManager.java:31)
After this it hangs for a long time before finally coming up with Node Manager Server Timed Out error and finally the Creating Domain step fails.
One thing that I have noticed is that whenever it tries to create the nodemanager.properties or write to it it encounters this error and hence the nodemanager.properties file is also not getting generated.
I have ensured that there are no spaces in the TEMP and TMP paths. I even tried creating and putting the nodemanager.properties file in the location but that too does not work.
Strange part is that when I install Weblogic separately and have nodemanager as a windows service, then with the nodemanager.properties that I created the windows service runs, but the OBIEE installation still fails.
Any help on this would be greatly appreciated.
Thanks and regards,
SubhoMy problem is "creating domain is failed". I guess that the issue with windows 7 32 bits on laptop doesn't configure and run nodemanager. I tried to start nodemanager but don't work (with weblogic scriptinf tools WST). However, Weblogic run ok but nodemanager is inactive. Also it doesn't create nodemanager.propierties. If I create a file nodemanager.properties (or I copied on directory obiee_home\ws_server_10.3\common\nodemanager) obiee installer configures its parameters pre-configured (if I modify a parameter, the installer modify it a default value and I don't know where is these parameters and its definition).
I have installed obiee simple and enterprise and it don't work. I have installed on oracle 11g R2 (desktop and enterprise with datawarehouse) and obiee installer doesn't work. Further this installation obiee delay an hour and then generates error in my case "creating domain is failed".
I'm going try to run install obiee 11.1.1.5 on windows 7 xp mode.
Important: We need help of oracle experts or Oracle communicates if obiee installs or not on windows 7 32 bits laptop because We have wasted
Thanks if anyone help us!! -
Creating ASInstance Failed Error while Installing OBIEE 11g 11.1.1.5.0
Hi
I was trying to install OBIEE 11g 11.1.1.5.0 on a Windows Server 2003 32 Bit machine and was getting an error at 16% of Configuration Procress.
Error - Creating ASInstance Failed.
I went to see the logs. Please Help
Log :
[2011-06-09T20:17:15.609+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 25] [ecid: 0000J1op8sl6UOK6yVEgMG1DwCxt00000G,0] Created ASInstance. Calling opmn start command
[2011-06-09T20:17:17.218+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 25] [ecid: 0000J1op8sl6UOK6yVEgMG1DwCxt00000G,0] [[
oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
[2011-06-09T20:17:17.218+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 25] [ecid: 0000J1op8sl6UOK6yVEgMG1DwCxt00000G,0] Exit code from OPMNAdmin : 2
[2011-06-09T20:17:17.218+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 25] [ecid: 0000J1op8sl6UOK6yVEgMG1DwCxt00000G,0] [[
oracle.as.provisioning.engine.CfgWorkflowException
at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:178)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASInstance instance1.
Cause:
An internal operation has failed: Error in starting opmn server
Operation aborted because of a system call failure or internal error
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
... 18 more
Caused by: oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
... 19 moreHi,
The etc/hosts file needs to be changed from 127.0.0.1 host to the physical IP address before the start of the installation of 11.1.1.5.
For more information have a look at Oracle support doc id: 1333429.1
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=1333429.1
Regards,
Kalyan Chukkapalli
http://123obi.com -
Need help - install OBIEE in Linux box
i need a document for OBIEE 11gr1 installation document
i already downloaded the document from oracle website ...i need except that any useful blogs links and URL to install
OBIEE 11R1 in Linux box(OEL4U5)hi saichand,
Already i have posted my issue in this forum( OUI Seesion failed - OBIEE installation ---- Sep 13, 2010 9:33 PM Last Post By: HMS) before one week.
but i didn't get the reply to solve that issue. thats why i m posting a new thread for OBIEE installation document
and links, to solve the installation errors myself.
kindly share your ideas to solve the OBIEE installation error which i was posted earlier.
thanks...
Edited by: HMS on Sep 13, 2010 9:58 PM
Edited by: HMS on Sep 13, 2010 10:00 PM
Maybe you are looking for
-
IOS 6.1.4 update for iPhone 5?
I'm not understanding why the ios update which clearly states audio profile for speaker phone isn't allowed on the iphone 4 only the iphone 5. The last update screwed up the speakers on the iphone 4. So why would the update only be for the 5 when the
-
Email send via Mail in MAC can't be seen in gmail/yahoomail 'Send' mail section
Okay Mac gurus, I need your help. Mac model: MacBook Pro "Core i7" 2.8 13" Late 2011 OS: Yosemite 10.10 Current Situation: In my mail app in my MAC, I am using two mailboxes (google & yahoo accounts). I can send and receive emails in the mail app ju
-
I have a problem on accessing a webservice via SOAP. In detail: the webservice is developped in .NET (with Visual Studio .NET). I just took the WSDL file and generated the Service in ALBPM Studio. So far everything works fine. But if i try to access
-
Hi, I cann't see any video at youtube with firefox , but I can see them with IE. what shoud I do?
I'm sure my windows is OK
-
Date Query for SimpleDateFormat
HI, Iâm trying to create a Toplink query for Date. Toplink always generates the date query in the following format for my Oracle DB: 1. If I pass the value new Date() in then it generates to_date('2005-01-05 30368','yyyy-mm-dd sssss') 2. If